Removing the firmware framebuffer from the driver means that even
if the driver doesn't support the IP blocks in a GPU it will no
longer be functional after the driver fails to initialize.

This change will ensure that unsupported IP blocks at least cause
the driver to work with the EFI framebuffer.

Cc: stable@vger.kernel.org
Suggested-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rename vram_scratch into mem_scratch and allow allocating it into GTT as
well.

The only problem with that is that we won't have a default page for the
system aperture any more.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Technically all of those can use GTT as well, no need to force things
into VRAM.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1.Drop soft reset check when do should recover gpu check.
  (As it will skip gpu reset operation if some ip is hang but
   not support soft reset)
2.Check soft reset status before do soft reset when pre asic reset.
  a. If check soft reset return true, it means: some ip is hang and
     it also support soft reset, will try soft reset first.
  b. If check soft reset return false, it means:
       I.  All the ip are not hang, will skip gpu reset.
       II. Some ip is hang but not support soft reset, will skip soft
           reset and retry with full reset later.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's also part of gfxoff.

Cc: stable@vger.kernel.org # 6.0, 6.1
Reviewed-by: NMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit f543d286.

This is no longer needed since we no longer touch SDMA 5.x for s0i3.
Reviewed-by: NMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SDMA 5.x is part of the GFX block so it's controlled via
GFXOFF.  Skip suspend as it should be handled the same
as GFX.

v2: drop SDMA 4.x.  That requires special handling.
Reviewed-by: NMario Limonciello <mario.limonciello@amd.com>
Acked-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's handled by GFXOFF for SDMA 5.x and SMU saves the state on
SDMA 4.x.
Reviewed-by: NMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- evict_resource is taking too long causing sriov full access mode timeout.
  So, add an extra evict_resource in the beginning as an early evict.
Signed-off-by: NShikang Fan <shikang.fan@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In amdgpu_get_xgmi_hive(), we should not call kfree() after
kobject_put() as the PUT will call kfree().

In amdgpu_device_ip_init(), we need to check the returned *hive*
which can be NULL before we dereference it.
Signed-off-by: NLiang He <windhl@126.com>
Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- in device_resume, sriov configure interrupt should be in full access,
  so release_full_gpu should be done after kfd_resume.
- remove the previous workaround solution for sriov.

Fixes: ec4927d4 ("drm/amdgpu: fix for suspend/resume sequence under sriov")
Signed-off-by: NShikang Fan <shikang.fan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().

So before returning from amdgpu_device_resume|suspend_display_audio(),
pci_dev_put() is called to avoid refcount leak.

Fixes: 3f12acc8 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3")
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The patch is enabling mode-1 reset for RAS recovery in fatal error mode.
Signed-off-by: NYiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The state of VRAM is unreliable due to a PCI event like AER, link reset
or DPC.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Re-submitting IBs by the kernel has many problems because pre-
requisite state is not automatically re-created as well. In
other words neither binary semaphores nor things like ring
buffer pointers are in the state they should be when the
hardware starts to work on the IBs again.

Additional to that even after more than 5 years of
developing this feature it is still not stable and we have
massively problems getting the reference counts right.

As discussed with user space developers this behavior is not
helpful in the first place. For graphics and multimedia
workloads it makes much more sense to either completely
re-create the context or at least re-submitting the IBs
from userspace.

For compute use cases re-submitting is also not very
helpful since userspace must rely on the accuracy of
the result.

Because of this we stop this practice and instead just
properly note that the fence submission was canceled. The
only use case we keep the re-submission for now is SRIOV
and function level resets.

v2: as suggested by Sshaoyun stop resubmitting jobs even for SRIOV
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit e6c6338f.

This feature basically re-submits one job after another to
figure out which one was the one causing a hang.

This is obviously incompatible with gang-submit which requires
that multiple jobs run at the same time. It's also absolutely
not helpful to crash the hardware multiple times if a clean
recovery is desired.

For testing and debugging environments we should rather disable
recovery alltogether to be able to inspect the state with a hw
debugger.

Additional to that the sw implementation is clearly buggy and causes
reference count issues for the hardware fence.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Amdgpu_ras_set_error_query_ready is called at the start of
amdgpu_device_gpu_recover to disable query ras error, but the
code behind only enables query ras error in full reset path,
but not in soft reset path, emergency restart path and skip
the hardware reset path.
Signed-off-by: NYiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If we enable virtual display functionality on parts with
no display hardware we can end up trying to check for and
reserve the vbios FB area on devices where it doesn't exist.
Check if display hardware is actually present on the hardware
before trying to reserve the memory.

v2: move the check into common code
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If we enable virtual display functionality on parts with
no display hardware we can end up trying to check for and
reserve the vbios FB area on devices where it doesn't exist.
Check if display hardware is actually present on the hardware
before trying to reserve the memory.

v2: move the check into common code
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are several places where we don't want to check
if a particular asic could support DC, but rather, if
DC is enabled.  Set a flag if DC is enabled and check
for that rather than if a device supports DC or not.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

virtual display is enabled unconditionally in SR-IOV, but
without specifying the virtual_display module, the number
of crtcs defaults to 0.  Set a single display by default
for SR-IOV if the virtual_display parameter is not set.
Only enable virtual display by default on SR-IOV on asics
which actually have display hardware.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove include statements for <drm/drm_fb_helper.h> where it is not
required (i.e., most of them). In a few places include other header
files that are required by the source code.

v3:
	* fix amdgpu include statements
	* fix rockchip include statements
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NJavier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-23-tzimmermann@suse.de

- clear kiq ring after suspend/resume under sriov to aviod kiq ring
test failure
- update irq after resume to fix kiq interrput loss
Signed-off-by: NVictor Zhao <Victor.Zhao@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Start from soc21, CP does not support MCBP, so disable it.

[how]
Used amgpu_mcbp flag alone instead of checking if is in SRIOV to
enable/disable MCBP.
Only set flag to enable on asic_type prior to soc21 in SRIOV.
Signed-off-by: NYiqing Yao <yiqing.yao@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If a system does not have swap and memory is under 100% usage,
amdgpu will fail to evict resources.  Currently the suspend
carries on proceeding to reset the GPU:

```
[drm] evicting device resources failed
[drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <vcn_v3_0> failed -12
[drm] free PSP TMR buffer
[TTM] Failed allocating page table
[drm] evicting device resources failed
amdgpu 0000:03:00.0: amdgpu: MODE1 reset
amdgpu 0000:03:00.0: amdgpu: GPU mode1 reset
amdgpu 0000:03:00.0: amdgpu: GPU smu mode1 reset
```

At this point if the suspend actually succeeded I think that amdgpu
would have recovered because the GPU would have power cut off and
restored.  However the kernel fails to continue the suspend from the
memory pressure and amdgpu fails to run the "resume" from the aborted
suspend.

```
ACPI: PM: Preparing to enter system sleep state S3
SLUB: Unable to allocate memory on node -1, gfp=0xdc0(GFP_KERNEL|__GFP_ZERO)
  cache: Acpi-State, object size: 80, buffer size: 80, default order: 0, min order: 0
  node 0: slabs: 22, objs: 1122, free: 0
ACPI Error: AE_NO_MEMORY, Could not update object reference count (20210730/utdelete-651)

[drm:psp_hw_start [amdgpu]] *ERROR* PSP load kdb failed!
[drm:psp_resume [amdgpu]] *ERROR* PSP resume failed
[drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* resume of IP block <psp> failed -62
amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed (-62).
PM: dpm_run_callback(): pci_pm_resume+0x0/0x100 returns -62
amdgpu 0000:03:00.0: PM: failed to resume async: error -62
```

To avoid this series of unfortunate events, fail amdgpu's suspend
when the memory eviction fails.  This will let the system gracefully
recover and the user can try suspend again when the memory pressure
is relieved.

Reported-by: post@davidak.de
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2223Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If a system does not have swap and memory is under 100% usage,
amdgpu will fail to evict resources.  Currently the suspend
carries on proceeding to reset the GPU:

```
[drm] evicting device resources failed
[drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <vcn_v3_0> failed -12
[drm] free PSP TMR buffer
[TTM] Failed allocating page table
[drm] evicting device resources failed
amdgpu 0000:03:00.0: amdgpu: MODE1 reset
amdgpu 0000:03:00.0: amdgpu: GPU mode1 reset
amdgpu 0000:03:00.0: amdgpu: GPU smu mode1 reset
```

At this point if the suspend actually succeeded I think that amdgpu
would have recovered because the GPU would have power cut off and
restored.  However the kernel fails to continue the suspend from the
memory pressure and amdgpu fails to run the "resume" from the aborted
suspend.

```
ACPI: PM: Preparing to enter system sleep state S3
SLUB: Unable to allocate memory on node -1, gfp=0xdc0(GFP_KERNEL|__GFP_ZERO)
  cache: Acpi-State, object size: 80, buffer size: 80, default order: 0, min order: 0
  node 0: slabs: 22, objs: 1122, free: 0
ACPI Error: AE_NO_MEMORY, Could not update object reference count (20210730/utdelete-651)

[drm:psp_hw_start [amdgpu]] *ERROR* PSP load kdb failed!
[drm:psp_resume [amdgpu]] *ERROR* PSP resume failed
[drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* resume of IP block <psp> failed -62
amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed (-62).
PM: dpm_run_callback(): pci_pm_resume+0x0/0x100 returns -62
amdgpu 0000:03:00.0: PM: failed to resume async: error -62
```

To avoid this series of unfortunate events, fail amdgpu's suspend
when the memory eviction fails.  This will let the system gracefully
recover and the user can try suspend again when the memory pressure
is relieved.

Reported-by: post@davidak.de
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2223Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In the S2idle suspend/resume phase the gfxoff is keeping functional so
some IP blocks will be likely to reinitialize at gfxoff entry and that
will result in failing to program GC registers.Therefore, let disallow
gfxoff until AMDGPU IPs reinitialized completely.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15.x

Temporary disable mes self teset for gc 11.0.3 during gpu_recovery.
Signed-off-by: NYuBiao Wang <YuBiao.Wang@amd.com>
Acked-by: NLuben Tuikov <luben.tuikov@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Delete the redundant word 'the'.
Signed-off-by: Nwangjianli <wangjianli@cdjrlc.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In the S2idle suspend/resume phase the gfxoff is keeping functional so
some IP blocks will be likely to reinitialize at gfxoff entry and that
will result in failing to program GC registers.Therefore, let disallow
gfxoff until AMDGPU IPs reinitialized completely.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Temporary disable mes self teset for gc 11.0.3 during gpu_recovery.
Signed-off-by: NYuBiao Wang <YuBiao.Wang@amd.com>
Acked-by: NLuben Tuikov <luben.tuikov@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Suggested by PMFW team and same as what did for gfxoff feature.
This can address some Mode1Reset failures observed on SMU13.0.0.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit dac6b808.

This commit reverted the AMDGPU_SKIP_MODE2_RESET as it conflicts with
the original design of reset handler. Will redesign it.

Fixes: dac6b808 ("drm/amdgpu: let mode2 reset fallback to default when failure")
Signed-off-by: NVictor Zhao <Victor.Zhao@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Suggested by PMFW team and same as what did for gfxoff feature.
This can address some Mode1Reset failures observed on SMU13.0.0.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

This reverts commit dac6b808.

This commit reverted the AMDGPU_SKIP_MODE2_RESET as it conflicts with
the original design of reset handler. Will redesign it.

Fixes: dac6b808 ("drm/amdgpu: let mode2 reset fallback to default when failure")
Signed-off-by: NVictor Zhao <Victor.Zhao@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- Under SRIOV, we need to send REQ_GPU_FINI to the hypervisor
  during the suspend time. Furthermore, we cannot request a
  mode 1 reset under SRIOV as VF. Therefore, we will skip it
  as it is called in suspend_noirq() function.

- In the resume code path, we need to send REQ_GPU_INIT to the
  hypervisor and also resume PSP IP block under SRIOV.
Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the simpified API that calculates distance between two devices.
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Disable verbose while getting p2p distance. With verbose, it shows
warning if ACS redirect is set between the devices. Adds noise
to dmesg logs when a few GPU devices are on the same platform.

Example log:

amdgpu 0000:34:00.0: ACS redirect is set between the client and provider (0000:31:00.0)
amdgpu 0000:34:00.0: to disable ACS redirect for this path, add the kernel parameter:
	pci=disable_acs_redir=0000:30:00.0;0000:2e:00.0;0000:33:00.0;0000:2e:10.0
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- Under SRIOV, we need to send REQ_GPU_FINI to the hypervisor
  during the suspend time. Furthermore, we cannot request a
  mode 1 reset under SRIOV as VF. Therefore, we will skip it
  as it is called in suspend_noirq() function.

- In the resume code path, we need to send REQ_GPU_INIT to the
  hypervisor and also resume PSP IP block under SRIOV.
Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Allows submitting jobs as gang which needs to run on multiple
engines at the same time.

Basic idea is that we have a global gang submit fence representing when the
gang leader is finally pushed to run on the hardware last.

Jobs submitted as gang are never re-submitted in case of a GPU reset since this
won't work and will just deadlock the hardware immediately again.

v2: fix logic inversion, improve documentation, fix rcu
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>