- 31 1月, 2012 1 次提交
-
-
由 Larry Finger 提交于
This patch addresses a kernel bugzilla report and two recent mail threads. The kernel bugzilla report is https://bugzilla.kernel.org/show_bug.cgi?id=42632, which reports a udev timeout on boot. The first mail thread, which was on LKML (http://lkml.indiana.edu/hypermail/ linux/kernel/1112.3/00965.html) was for a WARNING that occurs after a suspend/resume cycle for rtl8192cu. The scond mail thread (http://marc.info/?l=linux-wireless&m=132655490826766&w=2) concerned changes in udev that break drivers that delay while firmware is loaded on modprobe. This patch converts all rtlwifi-based drivers to use the asynchronous firmware loading mechanism. Drivers rtl8192ce, rtl8192cu and rtl8192de share a common callback routine. Driver rtl8192se needs different handling of the firmware, thus it has its own code. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 1月, 2012 1 次提交
-
-
由 Johannes Berg 提交于
Due to firmware limitations, we may not be able to support beacon filtering on all virtual interfaces. To allow this in mac80211, introduce per-interface driver capability flags that the driver sets when an interface is added. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Acked-by: NLuciano Coelho <coelho@ti.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 25 1月, 2012 3 次提交
-
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Consolidate printks to avoid possible message interleaving and reduce the object size. Remove unnecessary RT_ASSERT parentheses. Align arguments. Coalesce formats. Remove unnecessary __func__ use as the macro uses it. $ size drivers/net/wireless/rtlwifi/built-in.o* text data bss dec hex filename 588901 55333 127216 771450 bc57a drivers/net/wireless/rtlwifi/built-in.o.new 590002 55333 127560 772895 bcb1f drivers/net/wireless/rtlwifi/built-in.o.old Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Consolidate printks to avoid possible message interleaving and reduce the object size. Remove unnecessary RT_TRACE parentheses. Miscellaneous typo and grammar fixes. Add missing newlines to formats. Remove duplicate KERN_DEBUG prefixes. Coalesce formats. Align arguments. $ size drivers/net/wireless/rtlwifi/built-in.o* text data bss dec hex filename 594841 55333 129680 779854 be64e drivers/net/wireless/rtlwifi/built-in.o.new 607022 55333 138720 801075 c3933 drivers/net/wireless/rtlwifi/built-in.o.old Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 04 10月, 2011 1 次提交
-
-
由 Eliad Peller 提交于
tx params should be configured per interface. add ieee80211_vif param to the conf_tx callback, and change all the drivers that use this callback. The following spatch was used: @rule1@ struct ieee80211_ops ops; identifier conf_tx_op; @@ ops.conf_tx = conf_tx_op; @rule2@ identifier rule1.conf_tx_op; identifier hw, queue, params; @@ conf_tx_op ( - struct ieee80211_hw *hw, + struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, const struct ieee80211_tx_queue_params *params) {...} Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 9月, 2011 1 次提交
-
-
由 Eliad Peller 提交于
TSF can be kept per vif. Add ieee80211_vif param to set/get/reset_tsf, and move the debugfs entries to the per-vif directory. Update all the drivers that implement these callbacks. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 14 9月, 2011 1 次提交
-
-
由 George 提交于
The driver fails to clear encryption keys making it impossible to switch connections. Signed-off-by: NGeorge <george0505@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [2.6.39+] Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 21 7月, 2011 1 次提交
-
-
由 Andy Shevchenko 提交于
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 21 6月, 2011 2 次提交
-
-
由 Mike McCormack 提交于
These are a potential source of confusion, as most C code treats all non-zero values as true. Signed-off-by: NMike McCormack <mikem@ring3k.org> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mike McCormack 提交于
offchan_deley should be offchan_delay Signed-off-by: NMike McCormack <mikem@ring3k.org> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 6月, 2011 1 次提交
-
-
由 Larry Finger 提交于
In "Build regressions/improvements in v3.0-rc2", Geert Uytterhoeven reports a number of warnings that occur for parisc builds of rtlwifi and dependents. Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 27 4月, 2011 1 次提交
-
-
由 Chaoming_Li 提交于
Convert core routines for addition of RTL8192SE and RTL8192DE code. Additional files are changed to allow compilation. Signed-off-by: NChaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 10 4月, 2011 1 次提交
-
-
由 Justin P. Mattock 提交于
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 05 4月, 2011 1 次提交
-
-
由 Larry Finger 提交于
Remove some unused variables and correct spelling errors. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 3月, 2011 1 次提交
-
-
由 Alessio Igor Bogani 提交于
=================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- net/mac80211/sta_info.c:125 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 5 locks held by wpa_supplicant/468: #0: (rtnl_mutex){+.+.+.}, at: [<c1465d84>] rtnl_lock+0x14/0x20 #1: (&rdev->mtx){+.+.+.}, at: [<f84b8c2b>] cfg80211_mgd_wext_siwfreq+0x6b/0x170 [cfg80211] #2: (&rdev->devlist_mtx){+.+.+.}, at: [<f84b8c37>] cfg80211_mgd_wext_siwfreq+0x77/0x170 [cfg80211] #3: (&wdev->mtx){+.+.+.}, at: [<f84b8c44>] cfg80211_mgd_wext_siwfreq+0x84/0x170 [cfg80211] #4: (&rtlpriv->locks.conf_mutex){+.+.+.}, at: [<f8506476>] rtl_op_bss_info_changed+0x26/0xc10 [rtlwifi] stack backtrace: Pid: 468, comm: wpa_supplicant Not tainted 2.6.38-rc6+ #79 Call Trace: [<c108806a>] ? lockdep_rcu_dereference+0xaa/0xb0 [<f8523d2c>] ? sta_info_get_bss+0x19c/0x1b0 [mac80211] [<f8523d62>] ? ieee80211_find_sta+0x22/0x40 [mac80211] [<f850661c>] ? rtl_op_bss_info_changed+0x1cc/0xc10 [rtlwifi] [<c153671c>] ? __mutex_unlock_slowpath+0x14c/0x160 [<c153673d>] ? mutex_unlock+0xd/0x10 [<f8507180>] ? rtl_op_config+0x120/0x310 [rtlwifi] [<c10896db>] ? trace_hardirqs_on+0xb/0x10 [<f8522169>] ? ieee80211_bss_info_change_notify+0xf9/0x1f0 [mac80211] [<f8506450>] ? rtl_op_bss_info_changed+0x0/0xc10 [rtlwifi] [<f853646f>] ? ieee80211_set_channel+0xbf/0xd0 [mac80211] [<f84b5f41>] ? cfg80211_set_freq+0x121/0x180 [cfg80211] [<f85363b0>] ? ieee80211_set_channel+0x0/0xd0 [mac80211] [<f84b8ceb>] ? cfg80211_mgd_wext_siwfreq+0x12b/0x170 [cfg80211] [<f84b87eb>] ? cfg80211_wext_siwfreq+0x9b/0x100 [cfg80211] [<c153b98b>] ? sub_preempt_count+0x7b/0xb0 [<c150f874>] ? ioctl_standard_call+0x74/0x3b0 [<c1465d84>] ? rtnl_lock+0x14/0x20 [<f84b8750>] ? cfg80211_wext_siwfreq+0x0/0x100 [cfg80211] [<c14568bd>] ? __dev_get_by_name+0x8d/0xb0 [<c150fddb>] ? wext_handle_ioctl+0x16b/0x180 [<f84b8750>] ? cfg80211_wext_siwfreq+0x0/0x100 [cfg80211] [<c145bc7a>] ? dev_ioctl+0x5ba/0x720 [<c108a947>] ? __lock_acquire+0x3e7/0x19b0 [<c1443b0b>] ? sock_ioctl+0x1eb/0x290 [<c108bfa5>] ? lock_release_non_nested+0x95/0x2f0 [<c1443920>] ? sock_ioctl+0x0/0x290 [<c114d74d>] ? do_vfs_ioctl+0x7d/0x5c0 [<c1112232>] ? might_fault+0x62/0xb0 [<c113e3c6>] ? fget_light+0x226/0x390 [<c1112278>] ? might_fault+0xa8/0xb0 [<c114dd17>] ? sys_ioctl+0x87/0x90 [<c1002f9f>] ? sysenter_do_call+0x12/0x38 This work was supported by a hardware donation from the CE Linux Forum. Signed-off-by: NAlessio Igor Bogani <abogani@kernel.org> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 26 2月, 2011 1 次提交
-
-
由 Johannes Berg 提交于
The return value of the tx operation is commonly misused by drivers, leading to errors. All drivers will drop frames if they fail to TX the frame, and they must also properly manage the queues (if they didn't, mac80211 would already warn). Removing the ability for drivers to return a BUSY value also allows significant cleanups of the TX TX handling code in mac80211. Note that this also fixes a bug in ath9k_htc, the old "return -1" there was wrong. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> [ath5k] Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> [rt2x00] Acked-by: Larry Finger <Larry.Finger@lwfinger.net> [b43, rtl8187, rtlwifi] Acked-by: Luciano Coelho <coelho@ti.com> [wl12xx] Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 22 2月, 2011 2 次提交
-
-
由 Larry Finger 提交于
Drivers rtlwifi, and rtl8192ce generate a large number of sparse warnings. This patch fixes most of them. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Modify some rtl8192ce routines for merging with rtl8192cu. In addition, remove some usage of Hungarian notation. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 1月, 2011 1 次提交
-
-
由 Johannes Berg 提交于
The aggregation code currently doesn't implement the buffer size negotiation. It will always request a max buffer size (which is fine, if a little pointless, as the mac80211 code doesn't know and might just use 0 instead), but if the peer requests a smaller size it isn't possible to honour this request. In order to fix this, look at the buffer size in the addBA response frame, keep track of it and pass it to the driver in the ampdu_action callback when called with the IEEE80211_AMPDU_TX_OPERATIONAL action. That way the driver can limit the number of subframes in aggregates appropriately. Note that this doesn't fix any drivers apart from the addition of the new argument -- they all need to be updated separately to use this variable! Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 17 12月, 2010 1 次提交
-
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 16 12月, 2010 1 次提交
-
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-