1. 21 7月, 2018 6 次提交
  2. 20 7月, 2018 4 次提交
  3. 19 7月, 2018 30 次提交
    • R
      ACPI / EC: Use ec_no_wakeup on more Thinkpad X1 Carbon 6th systems · 2c4d6baf
      Robin H. Johnson 提交于
      The ec_no_wakeup matcher added for Thinkpad X1 Carbon 6th gen systems
      beyond matched only a single DMI model (20KGS3JF01), that didn't cover
      my laptop (20KH002JUS). Change to match based on DMI product family to
      cover all X1 6th gen systems.
      Signed-off-by: NRobin H. Johnson <robbat2@gentoo.org>
      Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      2c4d6baf
    • B
      drm/nouveau/fb/gp100-: disable address remapper · 2f958e82
      Ben Skeggs 提交于
      This was causing problems on a system with a large amount of RAM, where
      display push buffers were being fetched incorrectly when placed in high
      system memory addresses.
      
      While this commit will resolve the issue on that particular system, the
      issue will be avoided completely with another patch to more fully solve
      problems with display and large amounts of system memory on Pascal.
      
      It's still probably a good idea to disable this to prevent weird issues
      in the future.
      Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
      2f958e82
    • G
      ptp: fix missing break in switch · 9ba8376c
      Gustavo A. R. Silva 提交于
      It seems that a *break* is missing in order to avoid falling through
      to the default case. Otherwise, checking *chan* makes no sense.
      
      Fixes: 72df7a72 ("ptp: Allow reassigning calibration pin function")
      Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
      Acked-by: NRichard Cochran <richardcochran@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9ba8376c
    • H
      hv_netvsc: Fix napi reschedule while receive completion is busy · 6b81b193
      Haiyang Zhang 提交于
      If out ring is full temporarily and receive completion cannot go out,
      we may still need to reschedule napi if certain conditions are met.
      Otherwise the napi poll might be stopped forever, and cause network
      disconnect.
      
      Fixes: 7426b1a5 ("netvsc: optimize receive completions")
      Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
      Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6b81b193
    • A
      net: cavium: Add fine-granular dependencies on PCI · e40562ab
      Alexander Sverdlin 提交于
      Add dependencies on PCI where necessary.
      
      Fixes: 7e2bc7fb ("net: cavium: Drop dependency of NET_VENDOR_CAVIUM on PCI")
      Signed-off-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e40562ab
    • S
      net: qca_spi: Fix log level if probe fails · 50973993
      Stefan Wahren 提交于
      In cases the probing fails the log level of the messages should
      be an error.
      Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      50973993
    • S
      net: qca_spi: Make sure the QCA7000 reset is triggered · 711c62df
      Stefan Wahren 提交于
      In case the SPI thread is not running, a simple reset of sync
      state won't fix the transmit timeout. We also need to wake up the kernel
      thread.
      Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
      Fixes: ed7d42e2 ("net: qca_spi: fix transmit queue timeout handling")
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      711c62df
    • S
      net: qca_spi: Avoid packet drop during initial sync · b2bab426
      Stefan Wahren 提交于
      As long as the synchronization with the QCA7000 isn't finished, we
      cannot accept packets from the upper layers. So let the SPI thread
      enable the TX queue after sync and avoid unwanted packet drop.
      Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
      Fixes: 291ab06e ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b2bab426
    • A
      net: dsa: mv88e6xxx: Longer timeout for PTP TX timestamp · df31b74c
      Andrew Lunn 提交于
      For slow processors using bit-banging MDIO, 20ms can be too short a
      timeout when waiting for the transmit timestamp to become
      available. Double it to 40ms.
      Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
      Acked-by: NRichard Cochran <richardcochran@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      df31b74c
    • A
      net: dsa: mv88e6xxx: Set PTP Ethertype · 2dbed245
      Andrew Lunn 提交于
      For the 6352 and newer switches, the PTP Ethertype defaults to
      ETH_P_1588. Hence it was not explicitly set. The 6165 however defaults
      to 0. So explicitly set the EtherType.
      Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
      Acked-by: NRichard Cochran <richardcochran@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2dbed245
    • A
      net: dsa: mv88e6xxx: Add hwtimestamp support for the 6165 · e2294a8b
      Andrew Lunn 提交于
      The 6165 family supports a more restricted version of hardware time
      stamps. Only L2 PTP is supported. All ports have to use the same
      EtherType, and transport spec configuration. PTP can only be
      enabled/disabled globally, not per port.
      Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
      Acked-by: NRichard Cochran <richardcochran@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e2294a8b
    • A
      net: dsa: mv88e6xxx: Abstract supported PTP filters · 48cb5e03
      Andrew Lunn 提交于
      The 6165 only supports layer L2 PTP, where as the more modern devices
      also support UDP and UDPv6, i.e. L4. Abstract the supported receive
      filters.
      Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
      Acked-by: NRichard Cochran <richardcochran@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      48cb5e03
    • A
      net: dsa: mv88e6xxx: Abstract HW timestamp setup · ffc705de
      Andrew Lunn 提交于
      The 6165 family does not have per port PTP control registers. Also, it
      places the timestamp data in different registers. Abstract the current
      implementation of 6352 compatible PTP devices so that 6165 can be
      added.
      Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
      Acked-by: NRichard Cochran <richardcochran@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ffc705de
    • A
      net: dsa: mv88e6xxx: Add mv88e6165 PTP support · dfa54348
      Andrew Lunn 提交于
      The mv88e6165 family has its global clock in the PTP global
      registers. It does not support any form of PTP events. Add a function
      to read the clock, fill in an ops structure, and register it with the
      two members of the family.
      Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
      Acked-by: NRichard Cochran <richardcochran@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      dfa54348
    • A
      net: dsa: mv88e6xxx: Add MV88E6165 AVB register access · a469a612
      Andrew Lunn 提交于
      The MV88E6165 PTP registers are all in AVB bank F, unlike newer
      generations which spread them over AVB bank E and F. Implement AVB ops
      for the MV88E6165 which hides this difference.
      Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
      Acked-by: NRichard Cochran <richardcochran@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a469a612
    • A
      net: dsa: mv88e6xxx: Abstract PTP operations · 6d2ac8ee
      Andrew Lunn 提交于
      The mv88e6165 family supports PTP, but its registers use a different
      layout to the currently supported devices. Abstract accessing the PTP
      registers into a set of ops, so making space for a second
      implementation.
      Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
      Acked-by: NRichard Cochran <richardcochran@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6d2ac8ee
    • S
      PCI: v3-semi: Fix I/O space page leak · 270ed733
      Sergei Shtylyov 提交于
      When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
      driver was left disabled, the kernel crashed with this BUG:
      
        kernel BUG at lib/ioremap.c:72!
        Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
        Modules linked in:
        CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
        Hardware name: Renesas Condor board based on r8a77980 (DT)
        Workqueue: events deferred_probe_work_func
        pstate: 80000005 (Nzcv daif -PAN -UAO)
        pc : ioremap_page_range+0x370/0x3c8
        lr : ioremap_page_range+0x40/0x3c8
        sp : ffff000008da39e0
        x29: ffff000008da39e0 x28: 00e8000000000f07
        x27: ffff7dfffee00000 x26: 0140000000000000
        x25: ffff7dfffef00000 x24: 00000000000fe100
        x23: ffff80007b906000 x22: ffff000008ab8000
        x21: ffff000008bb1d58 x20: ffff7dfffef00000
        x19: ffff800009c30fb8 x18: 0000000000000001
        x17: 00000000000152d0 x16: 00000000014012d0
        x15: 0000000000000000 x14: 0720072007200720
        x13: 0720072007200720 x12: 0720072007200720
        x11: 0720072007300730 x10: 00000000000000ae
        x9 : 0000000000000000 x8 : ffff7dffff000000
        x7 : 0000000000000000 x6 : 0000000000000100
        x5 : 0000000000000000 x4 : 000000007b906000
        x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
        x1 : 0000000040000000 x0 : 00e80000fe100f07
        Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
        Call trace:
         ioremap_page_range+0x370/0x3c8
         pci_remap_iospace+0x7c/0xac
         pci_parse_request_of_pci_ranges+0x13c/0x190
         rcar_pcie_probe+0x4c/0xb04
         platform_drv_probe+0x50/0xbc
         driver_probe_device+0x21c/0x308
         __device_attach_driver+0x98/0xc8
         bus_for_each_drv+0x54/0x94
         __device_attach+0xc4/0x12c
         device_initial_probe+0x10/0x18
         bus_probe_device+0x90/0x98
         deferred_probe_work_func+0xb0/0x150
         process_one_work+0x12c/0x29c
         worker_thread+0x200/0x3fc
         kthread+0x108/0x134
         ret_from_fork+0x10/0x18
        Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
      
      It turned out that pci_remap_iospace() wasn't undone when the driver's
      probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
      the probe was retried,  finally causing the BUG due to trying to remap
      already remapped pages.
      
      The V3 Semiconductor PCI driver has the same issue.
      Replace devm_pci_remap_iospace() with its devm_ managed version to fix
      the bug.
      
      Fixes: 68a15eb7 ("PCI: v3-semi: Add V3 Semiconductor PCI host driver")
      Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      [lorenzo.pieralisi@arm.com: updated the commit log]
      Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
      Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
      270ed733
    • S
      PCI: mediatek: Fix I/O space page leak · 438477b9
      Sergei Shtylyov 提交于
      When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
      driver was left disabled, the kernel crashed with this BUG:
      
        kernel BUG at lib/ioremap.c:72!
        Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
        Modules linked in:
        CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
        Hardware name: Renesas Condor board based on r8a77980 (DT)
        Workqueue: events deferred_probe_work_func
        pstate: 80000005 (Nzcv daif -PAN -UAO)
        pc : ioremap_page_range+0x370/0x3c8
        lr : ioremap_page_range+0x40/0x3c8
        sp : ffff000008da39e0
        x29: ffff000008da39e0 x28: 00e8000000000f07
        x27: ffff7dfffee00000 x26: 0140000000000000
        x25: ffff7dfffef00000 x24: 00000000000fe100
        x23: ffff80007b906000 x22: ffff000008ab8000
        x21: ffff000008bb1d58 x20: ffff7dfffef00000
        x19: ffff800009c30fb8 x18: 0000000000000001
        x17: 00000000000152d0 x16: 00000000014012d0
        x15: 0000000000000000 x14: 0720072007200720
        x13: 0720072007200720 x12: 0720072007200720
        x11: 0720072007300730 x10: 00000000000000ae
        x9 : 0000000000000000 x8 : ffff7dffff000000
        x7 : 0000000000000000 x6 : 0000000000000100
        x5 : 0000000000000000 x4 : 000000007b906000
        x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
        x1 : 0000000040000000 x0 : 00e80000fe100f07
        Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
        Call trace:
         ioremap_page_range+0x370/0x3c8
         pci_remap_iospace+0x7c/0xac
         pci_parse_request_of_pci_ranges+0x13c/0x190
         rcar_pcie_probe+0x4c/0xb04
         platform_drv_probe+0x50/0xbc
         driver_probe_device+0x21c/0x308
         __device_attach_driver+0x98/0xc8
         bus_for_each_drv+0x54/0x94
         __device_attach+0xc4/0x12c
         device_initial_probe+0x10/0x18
         bus_probe_device+0x90/0x98
         deferred_probe_work_func+0xb0/0x150
         process_one_work+0x12c/0x29c
         worker_thread+0x200/0x3fc
         kthread+0x108/0x134
         ret_from_fork+0x10/0x18
        Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
      
      It turned out that pci_remap_iospace() wasn't undone when the driver's
      probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
      the probe was retried, finally causing the BUG due to trying to remap
      already remapped pages.
      
      The MediaTek PCIe driver has the same issue.
      
      Replace devm_pci_remap_iospace() with its devm_ managed counterpart
      to fix the bug.
      
      Fixes: 637cfaca ("PCI: mediatek: Add MediaTek PCIe host controller support")
      Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      [lorenzo.pieralisi@arm.com: updated the commit log]
      Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
      Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
      438477b9
    • S
      PCI: faraday: Fix I/O space page leak · e3060945
      Sergei Shtylyov 提交于
      When testing the R-Car PCIe driver on the Condor board, if
      the PCIe PHY driver was left disabled, the kernel crashed with this BUG:
      
        kernel BUG at lib/ioremap.c:72!
        Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
        Modules linked in:
        CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
        Hardware name: Renesas Condor board based on r8a77980 (DT)
        Workqueue: events deferred_probe_work_func
        pstate: 80000005 (Nzcv daif -PAN -UAO)
        pc : ioremap_page_range+0x370/0x3c8
        lr : ioremap_page_range+0x40/0x3c8
        sp : ffff000008da39e0
        x29: ffff000008da39e0 x28: 00e8000000000f07
        x27: ffff7dfffee00000 x26: 0140000000000000
        x25: ffff7dfffef00000 x24: 00000000000fe100
        x23: ffff80007b906000 x22: ffff000008ab8000
        x21: ffff000008bb1d58 x20: ffff7dfffef00000
        x19: ffff800009c30fb8 x18: 0000000000000001
        x17: 00000000000152d0 x16: 00000000014012d0
        x15: 0000000000000000 x14: 0720072007200720
        x13: 0720072007200720 x12: 0720072007200720
        x11: 0720072007300730 x10: 00000000000000ae
        x9 : 0000000000000000 x8 : ffff7dffff000000
        x7 : 0000000000000000 x6 : 0000000000000100
        x5 : 0000000000000000 x4 : 000000007b906000
        x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
        x1 : 0000000040000000 x0 : 00e80000fe100f07
        Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
        Call trace:
         ioremap_page_range+0x370/0x3c8
         pci_remap_iospace+0x7c/0xac
         pci_parse_request_of_pci_ranges+0x13c/0x190
         rcar_pcie_probe+0x4c/0xb04
         platform_drv_probe+0x50/0xbc
         driver_probe_device+0x21c/0x308
         __device_attach_driver+0x98/0xc8
         bus_for_each_drv+0x54/0x94
         __device_attach+0xc4/0x12c
         device_initial_probe+0x10/0x18
         bus_probe_device+0x90/0x98
         deferred_probe_work_func+0xb0/0x150
         process_one_work+0x12c/0x29c
         worker_thread+0x200/0x3fc
         kthread+0x108/0x134
         ret_from_fork+0x10/0x18
        Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
      
      It turned out that pci_remap_iospace() wasn't undone when the driver's
      probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
      the probe was retried, finally causing the BUG due to trying to remap
      already remapped pages.
      
      The Faraday PCI driver has the same issue. Replace pci_remap_iospace()
      with its devm_ managed version to fix the bug.
      
      Fixes: d3c68e0a ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver")
      Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      [lorenzo.pieralisi@arm.com: updated the commit log]
      Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
      Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
      e3060945
    • S
      PCI: aardvark: Fix I/O space page leak · 1df3e5b3
      Sergei Shtylyov 提交于
      When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
      driver was left disabled, the kernel crashed with this BUG:
      
        kernel BUG at lib/ioremap.c:72!
        Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
        Modules linked in:
        CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
        Hardware name: Renesas Condor board based on r8a77980 (DT)
        Workqueue: events deferred_probe_work_func
        pstate: 80000005 (Nzcv daif -PAN -UAO)
        pc : ioremap_page_range+0x370/0x3c8
        lr : ioremap_page_range+0x40/0x3c8
        sp : ffff000008da39e0
        x29: ffff000008da39e0 x28: 00e8000000000f07
        x27: ffff7dfffee00000 x26: 0140000000000000
        x25: ffff7dfffef00000 x24: 00000000000fe100
        x23: ffff80007b906000 x22: ffff000008ab8000
        x21: ffff000008bb1d58 x20: ffff7dfffef00000
        x19: ffff800009c30fb8 x18: 0000000000000001
        x17: 00000000000152d0 x16: 00000000014012d0
        x15: 0000000000000000 x14: 0720072007200720
        x13: 0720072007200720 x12: 0720072007200720
        x11: 0720072007300730 x10: 00000000000000ae
        x9 : 0000000000000000 x8 : ffff7dffff000000
        x7 : 0000000000000000 x6 : 0000000000000100
        x5 : 0000000000000000 x4 : 000000007b906000
        x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
        x1 : 0000000040000000 x0 : 00e80000fe100f07
        Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
        Call trace:
         ioremap_page_range+0x370/0x3c8
         pci_remap_iospace+0x7c/0xac
         pci_parse_request_of_pci_ranges+0x13c/0x190
         rcar_pcie_probe+0x4c/0xb04
         platform_drv_probe+0x50/0xbc
         driver_probe_device+0x21c/0x308
         __device_attach_driver+0x98/0xc8
         bus_for_each_drv+0x54/0x94
         __device_attach+0xc4/0x12c
         device_initial_probe+0x10/0x18
         bus_probe_device+0x90/0x98
         deferred_probe_work_func+0xb0/0x150
         process_one_work+0x12c/0x29c
         worker_thread+0x200/0x3fc
         kthread+0x108/0x134
         ret_from_fork+0x10/0x18
        Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
      
      It turned out that pci_remap_iospace() wasn't undone when the driver's
      probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
      the probe was retried, finally causing the BUG due to trying to remap
      already remapped pages.
      
      The Aardvark PCI controller driver has the same issue.
      Replace pci_remap_iospace() with its devm_ managed version to fix the bug.
      
      Fixes: 8c39d710 ("PCI: aardvark: Add Aardvark PCI host controller driver")
      Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      [lorenzo.pieralisi@arm.com: updated the commit log]
      Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
      Reviewed-by: NThomas Petazzoni <thomas.petazzoni@bootlin.com>
      Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
      1df3e5b3
    • S
      PCI: designware: Fix I/O space page leak · fd07f5e1
      Sergei Shtylyov 提交于
      When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
      driver is left disabled, the kernel crashed with this BUG:
      
        kernel BUG at lib/ioremap.c:72!
        Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
        Modules linked in:
        CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
        Hardware name: Renesas Condor board based on r8a77980 (DT)
        Workqueue: events deferred_probe_work_func
        pstate: 80000005 (Nzcv daif -PAN -UAO)
        pc : ioremap_page_range+0x370/0x3c8
        lr : ioremap_page_range+0x40/0x3c8
        sp : ffff000008da39e0
        x29: ffff000008da39e0 x28: 00e8000000000f07
        x27: ffff7dfffee00000 x26: 0140000000000000
        x25: ffff7dfffef00000 x24: 00000000000fe100
        x23: ffff80007b906000 x22: ffff000008ab8000
        x21: ffff000008bb1d58 x20: ffff7dfffef00000
        x19: ffff800009c30fb8 x18: 0000000000000001
        x17: 00000000000152d0 x16: 00000000014012d0
        x15: 0000000000000000 x14: 0720072007200720
        x13: 0720072007200720 x12: 0720072007200720
        x11: 0720072007300730 x10: 00000000000000ae
        x9 : 0000000000000000 x8 : ffff7dffff000000
        x7 : 0000000000000000 x6 : 0000000000000100
        x5 : 0000000000000000 x4 : 000000007b906000
        x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
        x1 : 0000000040000000 x0 : 00e80000fe100f07
        Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
        Call trace:
         ioremap_page_range+0x370/0x3c8
         pci_remap_iospace+0x7c/0xac
         pci_parse_request_of_pci_ranges+0x13c/0x190
         rcar_pcie_probe+0x4c/0xb04
         platform_drv_probe+0x50/0xbc
         driver_probe_device+0x21c/0x308
         __device_attach_driver+0x98/0xc8
         bus_for_each_drv+0x54/0x94
         __device_attach+0xc4/0x12c
         device_initial_probe+0x10/0x18
         bus_probe_device+0x90/0x98
         deferred_probe_work_func+0xb0/0x150
         process_one_work+0x12c/0x29c
         worker_thread+0x200/0x3fc
         kthread+0x108/0x134
         ret_from_fork+0x10/0x18
        Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
      
      It turned out that pci_remap_iospace() wasn't undone when the driver's
      probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
      the probe was retried, finally causing the BUG due to trying to remap
      already remapped pages.
      
      The DesignWare PCIe controller driver has the same issue.
      
      Replace devm_pci_remap_iospace() with a devm_ managed version to fix the
      bug.
      
      Fixes: cbce7900 ("PCI: designware: Make driver arch-agnostic")
      Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      [lorenzo.pieralisi@arm.com: updated the commit log]
      Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
      Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
      Acked-by: NJingoo Han <jingoohan1@gmail.com>
      fd07f5e1
    • S
      PCI: versatile: Fix I/O space page leak · 0018b265
      Sergei Shtylyov 提交于
      When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
      driver was left disabled, the kernel crashed with this BUG:
      
        kernel BUG at lib/ioremap.c:72!
        Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
        Modules linked in:
        CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
        Hardware name: Renesas Condor board based on r8a77980 (DT)
        Workqueue: events deferred_probe_work_func
        pstate: 80000005 (Nzcv daif -PAN -UAO)
        pc : ioremap_page_range+0x370/0x3c8
        lr : ioremap_page_range+0x40/0x3c8
        sp : ffff000008da39e0
        x29: ffff000008da39e0 x28: 00e8000000000f07
        x27: ffff7dfffee00000 x26: 0140000000000000
        x25: ffff7dfffef00000 x24: 00000000000fe100
        x23: ffff80007b906000 x22: ffff000008ab8000
        x21: ffff000008bb1d58 x20: ffff7dfffef00000
        x19: ffff800009c30fb8 x18: 0000000000000001
        x17: 00000000000152d0 x16: 00000000014012d0
        x15: 0000000000000000 x14: 0720072007200720
        x13: 0720072007200720 x12: 0720072007200720
        x11: 0720072007300730 x10: 00000000000000ae
        x9 : 0000000000000000 x8 : ffff7dffff000000
        x7 : 0000000000000000 x6 : 0000000000000100
        x5 : 0000000000000000 x4 : 000000007b906000
        x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
        x1 : 0000000040000000 x0 : 00e80000fe100f07
        Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
        Call trace:
         ioremap_page_range+0x370/0x3c8
         pci_remap_iospace+0x7c/0xac
         pci_parse_request_of_pci_ranges+0x13c/0x190
         rcar_pcie_probe+0x4c/0xb04
         platform_drv_probe+0x50/0xbc
         driver_probe_device+0x21c/0x308
         __device_attach_driver+0x98/0xc8
         bus_for_each_drv+0x54/0x94
         __device_attach+0xc4/0x12c
         device_initial_probe+0x10/0x18
         bus_probe_device+0x90/0x98
         deferred_probe_work_func+0xb0/0x150
         process_one_work+0x12c/0x29c
         worker_thread+0x200/0x3fc
         kthread+0x108/0x134
         ret_from_fork+0x10/0x18
        Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
      
      It turned out that pci_remap_iospace() wasn't undone when the driver's
      probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
      the probe was retried, finally causing the BUG due to trying to remap
      already remapped pages.
      
      The Versatile PCI controller driver has the same issue.
      Replace pci_remap_iospace() with the devm_ managed version to fix the bug.
      
      Fixes: b7e78170 ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver")
      Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      [lorenzo.pieralisi@arm.com: updated the commit log]
      Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
      Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
      0018b265
    • S
      PCI: xgene: Fix I/O space page leak · 925652d0
      Sergei Shtylyov 提交于
      When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
      driver was left disabled, the kernel crashed with this BUG:
      
        kernel BUG at lib/ioremap.c:72!
        Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
        Modules linked in:
        CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
        Hardware name: Renesas Condor board based on r8a77980 (DT)
        Workqueue: events deferred_probe_work_func
        pstate: 80000005 (Nzcv daif -PAN -UAO)
        pc : ioremap_page_range+0x370/0x3c8
        lr : ioremap_page_range+0x40/0x3c8
        sp : ffff000008da39e0
        x29: ffff000008da39e0 x28: 00e8000000000f07
        x27: ffff7dfffee00000 x26: 0140000000000000
        x25: ffff7dfffef00000 x24: 00000000000fe100
        x23: ffff80007b906000 x22: ffff000008ab8000
        x21: ffff000008bb1d58 x20: ffff7dfffef00000
        x19: ffff800009c30fb8 x18: 0000000000000001
        x17: 00000000000152d0 x16: 00000000014012d0
        x15: 0000000000000000 x14: 0720072007200720
        x13: 0720072007200720 x12: 0720072007200720
        x11: 0720072007300730 x10: 00000000000000ae
        x9 : 0000000000000000 x8 : ffff7dffff000000
        x7 : 0000000000000000 x6 : 0000000000000100
        x5 : 0000000000000000 x4 : 000000007b906000
        x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
        x1 : 0000000040000000 x0 : 00e80000fe100f07
        Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
        Call trace:
         ioremap_page_range+0x370/0x3c8
         pci_remap_iospace+0x7c/0xac
         pci_parse_request_of_pci_ranges+0x13c/0x190
         rcar_pcie_probe+0x4c/0xb04
         platform_drv_probe+0x50/0xbc
         driver_probe_device+0x21c/0x308
         __device_attach_driver+0x98/0xc8
         bus_for_each_drv+0x54/0x94
         __device_attach+0xc4/0x12c
         device_initial_probe+0x10/0x18
         bus_probe_device+0x90/0x98
         deferred_probe_work_func+0xb0/0x150
         process_one_work+0x12c/0x29c
         worker_thread+0x200/0x3fc
         kthread+0x108/0x134
         ret_from_fork+0x10/0x18
        Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
      
      It turned out that pci_remap_iospace() wasn't undone when the driver's
      probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
      the probe was retried, finally causing the BUG due to trying to remap
      already remapped pages.
      
      The X-Gene PCI controller driver has the same issue.
      Replace pci_remap_iospace() with the devm_ managed version so that the
      pages get unmapped automagically on any probe failure.
      
      Fixes: 5f6b6ccd ("PCI: xgene: Add APM X-Gene PCIe driver")
      Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      [lorenzo.pieralisi@arm.com: updated the commit log]
      Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
      Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
      925652d0
    • F
      net: dsa: Drop OF dependency for BCM_SF2 · 9aee398a
      Florian Fainelli 提交于
      NET_DSA_BCM_SF2 does not need to depend on CONFIG_OF anymore since we have
      stubs when that option is disabled.
      Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9aee398a
    • F
      net: ethernet: broadcom: Drop dependency on OF · 7f7b7574
      Florian Fainelli 提交于
      Both BCMGENET and SYSTEMPORT build just fine with CONFIG_OF=n, we do have a
      dependency on HAS_IOMEM that was not being reflected for SYSTEMPORT so add
      that.
      Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7f7b7574
    • F
      net: phy: Drop OF dependency for MDIO_BCM_UNIMAC · 8be7d96e
      Florian Fainelli 提交于
      The driver builds fine even with CONFIG_OF=n since we now have stubs that are
      provided.
      Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8be7d96e
    • A
      net: cavium: add missing PCI dependencies · 74525cc5
      Arnd Bergmann 提交于
      While some of the cavium drivers don't require PCI support, most
      others do, as shown by these build failures:
      
      WARNING: unmet direct dependencies detected for MDIO_THUNDER
        Depends on [n]: NETDEVICES [=y] && MDIO_BUS [=y] && 64BIT [=y] && PCI [=n]
        Selected by [y]:
        - THUNDER_NIC_BGX [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_CAVIUM [=y] && 64BIT [=y]
        - THUNDER_NIC_RGX [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_CAVIUM [=y] && 64BIT [=y]
      drivers/net/ethernet/cavium/thunder/nicvf_main.c: In function 'nicvf_set_irq_affinity':
      drivers/net/ethernet/cavium/thunder/nicvf_main.c:1095:25: error: implicit declaration of function 'pci_irq_vector'; did you mean 'rcu_irq_enter'? [-Werror=implicit-function-declaration]
      drivers/net/ethernet/cavium/thunder/nic_main.c: In function 'nic_mbx_intr_handler':
      drivers/net/ethernet/cavium/thunder/nic_main.c:1135:13: error: implicit declaration of function 'pci_irq_vector'; did you mean 'rcu_irq_enter'? [-Werror=implicit-function-declaration]
      In file included from drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:27:
      drivers/net/ethernet/cavium/liquidio/octeon_main.h: In function 'octeon_unmap_pci_barx':
      drivers/net/ethernet/cavium/liquidio/octeon_main.h:97:3: error: implicit declaration of function 'pci_release_region'; did you mean 'pci_release_regions'? [-Werror=implicit-function-declaration]
      drivers/net/ethernet/cavium/liquidio/octeon_mailbox.c: In function 'octeon_mbox_process_cmd':
      drivers/net/ethernet/cavium/liquidio/octeon_mailbox.c:263:3: error: implicit declaration of function 'pcie_capability_set_word'; did you mean 'has_capability_noaudit'? [-Werror=implicit-function-declaration]
      drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c: In function 'setup_cn23xx_octeon_pf_device':
      drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:1315:22: error: 'data32' is used uninitialized in this function [-Werror=uninitialized]
      drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c: In function 'cn23xx_dump_vf_iq_regs':
      include/linux/dynamic_debug.h:135:3: error: 'regval' may be used uninitialized in this function [-Werror=maybe-uninitialized]
      drivers/net/ethernet/cavium/liquidio/lio_core.c: In function 'octeon_setup_interrupt':
      drivers/net/ethernet/cavium/liquidio/lio_core.c:1067:17: error: invalid application of 'sizeof' to incomplete type 'struct msix_entry'
      drivers/net/ethernet/cavium/liquidio/octeon_main.h: In function 'octeon_unmap_pci_barx':
      drivers/net/ethernet/cavium/liquidio/octeon_main.h:97:3: error: implicit declaration of function 'pci_release_region'; did you mean 'pci_release_regions'? [-Werror=implicit-function-declaration]
      
      This adds back the minimum set of dependencies to get everything to
      build cleanly again, but leaving the ones that build cleanly.
      
      Fixes: 7e2bc7fb ("net: cavium: Drop dependency of NET_VENDOR_CAVIUM on PCI")
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      74525cc5
    • A
      net: usb: asix: replace mii_nway_restart in resume path · 5c968f48
      Alexander Couzens 提交于
      mii_nway_restart is not pm aware which results in a rtnl deadlock.
      Implement mii_nway_restart manual by setting BMCR_ANRESTART if
      BMCR_ANENABLE is set.
      
      To reproduce:
      * plug an asix based usb network interface
      * wait until the device enters PM (~5 sec)
      * `ip link set eth1 up` will never return
      
      Fixes: d9fe64e5 ("net: asix: Add in_pm parameter")
      Signed-off-by: NAlexander Couzens <lynxis@fe80.eu>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5c968f48
    • Y
      liquidio: Using NULL instead of plain integer · bf20a5c1
      YueHaibing 提交于
      Fixes the following sparse warnings:
      
      drivers/net/ethernet/cavium/liquidio/lio_main.c:3068:23: warning:
       Using plain integer as NULL pointer
      drivers/net/ethernet/cavium/liquidio/lio_main.c:2909:23: warning:
       Using plain integer as NULL pointer
      drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c:385:27: warning:
       Using plain integer as NULL pointer
      Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bf20a5c1
    • S
      PCI: OF: Fix I/O space page leak · a5fb9fb0
      Sergei Shtylyov 提交于
      When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
      driver was left disabled, the kernel crashed with this BUG:
      
        kernel BUG at lib/ioremap.c:72!
        Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
        Modules linked in:
        CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
        Hardware name: Renesas Condor board based on r8a77980 (DT)
        Workqueue: events deferred_probe_work_func
        pstate: 80000005 (Nzcv daif -PAN -UAO)
        pc : ioremap_page_range+0x370/0x3c8
        lr : ioremap_page_range+0x40/0x3c8
        sp : ffff000008da39e0
        x29: ffff000008da39e0 x28: 00e8000000000f07
        x27: ffff7dfffee00000 x26: 0140000000000000
        x25: ffff7dfffef00000 x24: 00000000000fe100
        x23: ffff80007b906000 x22: ffff000008ab8000
        x21: ffff000008bb1d58 x20: ffff7dfffef00000
        x19: ffff800009c30fb8 x18: 0000000000000001
        x17: 00000000000152d0 x16: 00000000014012d0
        x15: 0000000000000000 x14: 0720072007200720
        x13: 0720072007200720 x12: 0720072007200720
        x11: 0720072007300730 x10: 00000000000000ae
        x9 : 0000000000000000 x8 : ffff7dffff000000
        x7 : 0000000000000000 x6 : 0000000000000100
        x5 : 0000000000000000 x4 : 000000007b906000
        x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
        x1 : 0000000040000000 x0 : 00e80000fe100f07
        Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
        Call trace:
         ioremap_page_range+0x370/0x3c8
         pci_remap_iospace+0x7c/0xac
         pci_parse_request_of_pci_ranges+0x13c/0x190
         rcar_pcie_probe+0x4c/0xb04
         platform_drv_probe+0x50/0xbc
         driver_probe_device+0x21c/0x308
         __device_attach_driver+0x98/0xc8
         bus_for_each_drv+0x54/0x94
         __device_attach+0xc4/0x12c
         device_initial_probe+0x10/0x18
         bus_probe_device+0x90/0x98
         deferred_probe_work_func+0xb0/0x150
         process_one_work+0x12c/0x29c
         worker_thread+0x200/0x3fc
         kthread+0x108/0x134
         ret_from_fork+0x10/0x18
        Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
      
      It turned out that pci_remap_iospace() wasn't undone when the driver's
      probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
      the probe was retried, finally causing the BUG due to trying to remap
      already remapped pages.
      
      Introduce the devm_pci_remap_iospace() managed API and replace the
      pci_remap_iospace() call with it to fix the bug.
      
      Fixes: dbf9826d ("PCI: generic: Convert to DT resource parsing API")
      Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      [lorenzo.pieralisi@arm.com: split commit/updated the commit log]
      Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
      Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
      a5fb9fb0