Analogically for other full-fledged HID drivers, make the Prodikeys
driver independent on EMBEDDED.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

A specialised HID driver for the Creative Prodikeys PC-MIDI USB Keyboard.

The Prodikeys PC-MIDI is a multifunction keyboard comprising a qwerty keyboard,
multimedia keys and a touch sensitive musical keyboard.

The specialised HID driver adds full support for the musical keyboard and extra
multimedia keys which are not currently handled by the default HID driver.

The specialised HID driver interfaces with ALSA, and presents the midi keyboard
as a rawmidi device. Sustain duration, octave shifting and the midi output
channel can be read/written form userspace via sysfs.
Signed-off-by: NDon Prince <dhprince-devel@yahoo.co.uk>
ALSA parts:
Acked-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Although the usbhid driver allocates its usbhid structure in the probe
routine, several critical fields in that structure don't get
initialized until usbhid_start().  However if report descriptor
parsing fails then usbhid_start() is never called.  This leads to
problems during system suspend -- the system will freeze.

This patch (as1378) fixes the bug by moving the initialization
statements up into usbhid_probe().
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: NBruno Prémont <bonbons@linux-vserver.org>
Tested-By: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Don't send the report type as part of the data, this prevents the
controller from going into the operational state at all.

This is completely equivalent to what the code originally meant to accomplish:
as per in net/bluetooth/hidp/core.c::hidp_output_raw_report(), by using
HID_FEATURE_REPORT here, what will be actually sent is
(HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE) which is exactly 0x53.
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Removing the higher number taps.  Their usage was incorrect
and even if correct they should not be used for a touch screen.
_MT_ events should be used to communicate multiple fingers.
Signed-off-by: NRafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Include TipSwitch in the touch detection decision for some single touch
firmwares.  Confidence and InRange are high for all finger events
including those used to indicate the finger is no longer in contact with
the sensor.
Signed-off-by: NRafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Make hidraw not stick an extra byte on the beginning of an IN transfer
when a HID device contains multiple reports.
Signed-off-by: NAlan Ott <alan@signal11.us>
Acked-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This is the only line printed on my "quiet" boot and seems completely
unnecessary.
Signed-off-by: NCory Fields <FOSS@AtlasTechnologiesInc.com>
Signed-off-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

I squelched TipSwitch in a recent patch which resulted in the loss
of Touch events for single touch firmwares.  This patch just puts Touch back
in for single touch, and bundles it with DoubleTap (like the multitouch code).
The two events are used to convey the same message to different drivers.
Signed-off-by: NRafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Support the solar version of the Cherry's cymotion keyboard line using
existing cherry driver.
Signed-off-by: NRaphaël Doursenaud <rdoursenaud@free.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Commit 6549981b ("HID: fix N-trig touch panel with recent firmware")
adds a quirk that is needed for devices with more recent firmware so that
they become operational.

As it's not directly obvious from the code why is it needed, a comment
is worthwile.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Added an init message that avoids device freeze with recent firmware.
Signed-off-by: NStephane Chatty <chatty@enac.fr>
Tested-by: NRafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

Add the NOGET quirk for the Quanta optical touchscreen present on MSI AE2220,
Otherwise, the hid-quanta driver timeouts at load time:

drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
quanta-touch 0003:0408:3001.0003: timeout initializing reports
input: PixArt Imaging Inc. Optical Touch Screen as /class/input/input7
quanta-touch 0003:0408:3001.0003: input: USB HID v1.10 Device [PixArt Imaging Inc. Optical Touch Screen] on usb-0000:00:06.0-2/input0
Signed-off-by: NAnisse Astier <anisse@astier.eu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix oops caused by dereferencing field->hidinput in cases where
the device hasn't been claimed by hid-input.
Reported-by: NAndreas Demmer <mail@andreas-demmer.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When dumping /sys/kernel/debug/hid/$device/events '\0' characters show up
(invisible if cat to console but shown by less or while looking at a dump
 file).  These are due to hid_debug_event() adding strlen()+1 bytes to the ring
buffer (e.g. including the trailing '\0').  Any roll-over causes a '\0' as well
as hid_debug_event() handles the ring buffers with HID_DEBUG_BUFSIZE-1 size
while hid_debug_events_read() handles it with full HID_DEBUG_BUFSIZE size.
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch enables force feedback for the "RGT Force Feedback CLUTCH Racing Wheel".
It only modifies hid-core.c (hid_blacklist) and hid-tmff.c to add the new USB IDs.
Signed-off-by: NMarkus Rathgeb <rathgeb.markus@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This reinstates the lost unpressing of BTN_TOUCH.  To prevent undesireably
touch toggles this also deals with tip switch events.

Added a trap to prevent going out of bounds for hidinputs with empty reports.

Clear bits of unused buttons which result in misidentification.
Signed-off-by: NRafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add HID_QUIRK_MULTI_INPUT for UC-Logik tablet.

$ lsusb
...
Bus 004 Device 002: ID 5543:0003 UC-Logic Technology Corp. Genius MousePen 4x3 Tablet/Aquila L1 Tablet
Signed-off-by: NAndrej Gelenberg <andrej.gelenberg@udo.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Ask the HID core not to register an input device for the mouse.
Fix an oops after removing the device, due to leaving the new
input device registered.
Signed-off-by: NMichael Poole <mdpoole@troilus.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The HID layer has some scan codes of the form 0xffbc0000 for logitech
devices which do not work if scancode is typed as signed int, so we need
to switch to unsigned it instead. While at it keycode being signed does
not make much sense either.
Acked-by: NMárton Németh <nm127@freemail.hu>
Acked-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Straightforward push into the drivers to allow
auditing individual drivers separately
Signed-off-by: NOliver Neukum <oliver@neukum.org>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move the initialization of USB interface pointers from _start()
over to _probe() callback, which is where it belongs.

This fixes case where interface is NULL when parsing of report
descriptor fails.

LKML-Reference: <20100213135720.603e5f64@neptune.home>
Reported-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Now that joystick button usages can expand over 15 buttons, we
have to properly mask out the code from hid usage to cover the
whole 0xffff available space.
Reported-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add DOUBLETAP to events emitted when in single touch only mode.

Users with a single touch firmware report not seeing the DOUBLETAP events; this
is a side effect of dropping old mapping for confidence. The confidence mapping
may be fine for singletouch mode but causes problems in multitouch mode.
Signed-off-by: NRafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This cleans up the identification of multitouch groups and enables
the end of group sync.

Taps are now explicitly handled to adjust for the changes in the
event stream in multitouch mode.  Added triple and quad tap for the
benefit of tools that recognize different tap types but do not have
full multi touch support.

This cleans up the behavior particularly for the latest firmware, which
didn't work particularly well with the older version of the driver.

In this form, when multitouch is active, both mt and st events will come out of
the "N-Trig MultiTouch" device.  And when its not st events will come out of
"N-Trig Touchscreen".
Signed-off-by: NRafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

With the pen and touch split apart, we no longer need to inject
additional tool switching events.
Signed-off-by: NRafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Added a quirk to enable distinct input devices.  The digitizer utilizes
three inputs to represent pen, multitouch and a normal touch screen.

With the Pen partitioned, it behaves well and does not need special
handling.

Also, I set names to the input devices to clarify the functions of the
various inputs.
Signed-off-by: NRafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Some devices do not react to a control request (seen on APC UPS's) resulting in
a slow stream of messages, "generic-usb ... control queue full".  Therefore
request needs a timeout.

Cc: stable@kernel.org
Signed-off-by: NOliver Neukum <oliver@neukum.org>
Signed-off-by: NDavid Fries <david@fries.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Use proper values to initialize bool configuration variables, tabs rather than
spaces, no braces for one-line else clause, __set_bit() when the operation
doesn't have to be atomic, input_set_abs_params() rather than writing the
fields directly, and call hid_hw_stop() when appropriate to handle failures in
the probe.
Signed-off-by: NMichael Poole <mdpoole@troilus.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

MODULE_VERSION doesn't make too much sense for drivers merged
into main tree, as git is much better tracking revisions than
any developer might ever be.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Make Apple MagicMouse Kconfig entry consistent with other dirvers.
Also expand the tristate text a little bit more, so that it doesn't
clash with already existing HID_APPLE.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The Magic Mouse requires that a driver send an unlock Report(Feature) command,
similar to the Wacom wireless tablet and Sixaxis controller quirks.  This turns
on an Input Report that isn't published in the input Report descriptor that
contains touch data (and usually overrides the normal motion and click Report).

Because the mouse has only one switch and no scroll wheel, the driver
(under control of parameters) emulates a middle button and scroll wheel.
User space could also ignore and/or re-synthesize those events based on
the reported events.

Some user-space tools to talk to the mouse directly (that is, when it is not
associated with the host's HIDP stack) are at
http://github.com/entrope/linux-magicmouseSigned-off-by: NMichael Poole <mdpoole@troilus.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The Apple Magic Mouse (and probably other devices) publish reports that are not
called out in their HID report descriptors -- they only send them when enabled
through other writes to the device.  This allows a driver to handle these
unlisted reports.
Signed-off-by: NMichael Poole <mdpoole@troilus.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Added support for MosArt dual-touch panels, present in the Asus T91MT notebook.
Signed-off-by: NStephane Chatty <chatty@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Added pressure handling for Stantum multitouch panels
Signed-off-by: NStephane Chatty <chatty@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fixed stupid copy-paste bug in touchscreen emulation for the Stantum multitouch
panel: a flag was reset just before being tested.
Signed-off-by: NStephane Chatty <chatty@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Adding a mapping for the 'AL Network Chat' usage from the 'Consumer' usage
page (USB HID Usage Tables v1.11). This usage is used by some keyboards for
a multimedia key.
Signed-off-by: NLeo P White <lpw25@cam.ac.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device generates ABS_Z and ABS_RX events, while it should be
generating ABS_X and ABS_Y instead. Using the MULTI_INPUT quirk solves
this issue.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: NDaniel Oliveira Nascimento <don@syst.com.br>
[jkosina@suse.cz: fixed blacklist ordering while resolving conflict]
[jkosina@suse.cz: fixed typo to make it compile]
Signed-off-by: NJiri Kosina <jkosina@suse.cz>