Slab destructors were no longer supported after Christoph's
c59def9f change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The slab and slob allocators already did this right, but slub would call
"get_object_page()" on the magic ZERO_SIZE_PTR, with all kinds of nasty
end results.

Noted by Ingo Molnar.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I suspect Christoph tested his code only in the NUMA configuration, for
the combination of SLAB+non-NUMA the zero-sized kmalloc's would not work.

Of course, this would only trigger in configurations where those zero-
sized allocations happen (not very common), so that may explain why it
wasn't more widely noticed.

Seen by by Andi Kleen under qemu, and there seems to be a report by
Michael Tsirkin on it too.

Cc: Andi Kleen <ak@suse.de>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lguest does some fairly lowlevel things to support a host, which
normal modules don't need:

math_state_restore:
	When the guest triggers a Device Not Available fault, we need
	to be able to restore the FPU

__put_task_struct:
	We need to hold a reference to another task for inter-guest
	I/O, and put_task_struct() is an inline function which calls
	__put_task_struct.

access_process_vm:
	We need to access another task for inter-guest I/O.

map_vm_area & __get_vm_area:
	We need to map the switcher shim (ie. monitor) at 0xFFC01000.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

page-writeback accounting is presently performed in the page-flags macros.
This is inconsistent and a bit ugly and makes it awkward to implement
per-backing_dev under-writeback page accounting.

So move this accounting down to the callsite(s).
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use appropriate accessor function to set compound page destructor
function.

Cc:  William Irwin <wli@holomorphy.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NAdam Litke <agl@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The fix to that race in alloc_fresh_huge_page() which could give an illegal
node ID did not need nid_lock at all: the fix was to replace static int nid
by static int prev_nid and do the work on local int nid.  nid_lock did make
sure that racers strictly roundrobin the nodes, but that's not something we
need to enforce strictly.  Kill nid_lock.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I've noticed lots of failures of vmalloc_32 on machines where it
shouldn't have failed unless it was doing an atomic operation.

Looking closely, I noticed that:

#if defined(CONFIG_64BIT) && defined(CONFIG_ZONE_DMA32)
#define GFP_VMALLOC32 GFP_DMA32
#elif defined(CONFIG_64BIT) && defined(CONFIG_ZONE_DMA)
#define GFP_VMALLOC32 GFP_DMA
#else
#define GFP_VMALLOC32 GFP_KERNEL
#endif

Which seems to be incorrect, it should always -or- in the DMA flags
on top of GFP_KERNEL, thus this patch.

This fixes frequent errors launchin X with the nouveau DRM for example.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Work around a possible bug in the FRV compiler.

What appears to be happening is that gcc resolves the
__builtin_constant_p() in kmalloc() to true, but then fails to reduce the
therefore constant conditions in the if-statements it guards to constant
results.

When compiling with -O2 or -Os, one single spurious error crops up in
cpuup_callback() in mm/slab.c.  This can be avoided by making the memsize
variable const.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb.c: In function `dequeue_huge_page':
mm/hugetlb.c:72: warning: 'nid' might be used uninitialized in this function

Cc: Christoph Lameter <clameter@sgi.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the arg+env limit of MAX_ARG_PAGES by copying the strings directly from
the old mm into the new mm.

We create the new mm before the binfmt code runs, and place the new stack at
the very top of the address space.  Once the binfmt code runs and figures out
where the stack should be, we move it downwards.

It is a bit peculiar in that we have one task with two mm's, one of which is
inactive.

[a.p.zijlstra@chello.nl: limit stack size]
Signed-off-by: NOllie Wild <aaw@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-arch@vger.kernel.org>
Cc: Hugh Dickins <hugh@veritas.com>
[bunk@stusta.de: unexport bprm_mm_init]
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename some file_ra_state variables and remove some accessors.

It results in much simpler code.
Kudos to Rusty!
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Split ondemand readahead interface into two functions.  I think this makes it
a little clearer for non-readahead experts (like Rusty).

Internally they both call ondemand_readahead(), but the page argument is
changed to an obvious boolean flag.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Share the same page flag bit for PG_readahead and PG_reclaim.

One is used only on file reads, another is only for emergency writes.  One
is used mostly for fresh/young pages, another is for old pages.

Combinations of possible interactions are:

a) clear PG_reclaim => implicit clear of PG_readahead
	it will delay an asynchronous readahead into a synchronous one
	it actually does _good_ for readahead:
		the pages will be reclaimed soon, it's readahead thrashing!
		in this case, synchronous readahead makes more sense.

b) clear PG_readahead => implicit clear of PG_reclaim
	one(and only one) page will not be reclaimed in time
	it can be avoided by checking PageWriteback(page) in readahead first

c) set PG_reclaim => implicit set of PG_readahead
	will confuse readahead and make it restart the size rampup process
	it's a trivial problem, and can mostly be avoided by checking
	PageWriteback(page) first in readahead

d) set PG_readahead => implicit set of PG_reclaim
	PG_readahead will never be set on already cached pages.
	PG_reclaim will always be cleared on dirtying a page.
	so not a problem.

In summary,
	a)   we get better behavior
	b,d) possible interactions can be avoided
	c)   racy condition exists that might affect readahead, but the chance
	     is _really_ low, and the hurt on readahead is trivial.

Compound pages also use PG_reclaim, but for now they do not interact with
reclaim/readahead code.
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the old readahead algorithm.
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert filemap reads to use on-demand readahead.

The new call scheme is to
- call readahead on non-cached page
- call readahead on look-ahead page
- update prev_index when finished with the read request
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a minimal readahead algorithm that aims to replace the current one.
It is more flexible and reliable, while maintaining almost the same behavior
and performance.  Also it is full integrated with adaptive readahead.

It is designed to be called on demand:
	- on a missing page, to do synchronous readahead
	- on a lookahead page, to do asynchronous readahead

In this way it eliminated the awkward workarounds for cache hit/miss,
readahead thrashing, retried read, and unaligned read.  It also adopts the
data structure introduced by adaptive readahead, parameterizes readahead
pipelining with `lookahead_index', and reduces the current/ahead windows to
one single window.

HEURISTICS

The logic deals with four cases:

	- sequential-next
		found a consistent readahead window, so push it forward

	- random
		standalone small read, so read as is

	- sequential-first
		create a new readahead window for a sequential/oversize request

	- lookahead-clueless
		hit a lookahead page not associated with the readahead window,
		so create a new readahead window and ramp it up

In each case, three parameters are determined:

	- readahead index: where the next readahead begins
	- readahead size:  how much to readahead
	- lookahead size:  when to do the next readahead (for pipelining)

BEHAVIORS

The old behaviors are maximally preserved for trivial sequential/random reads.
Notable changes are:

	- It no longer imposes strict sequential checks.
	  It might help some interleaved cases, and clustered random reads.
	  It does introduce risks of a random lookahead hit triggering an
	  unexpected readahead. But in general it is more likely to do good
	  than to do evil.

	- Interleaved reads are supported in a minimal way.
	  Their chances of being detected and proper handled are still low.

	- Readahead thrashings are better handled.
	  The current readahead leads to tiny average I/O sizes, because it
	  never turn back for the thrashed pages.  They have to be fault in
	  by do_generic_mapping_read() one by one.  Whereas the on-demand
	  readahead will redo readahead for them.

OVERHEADS

The new code reduced the overheads of

	- excessively calling the readahead routine on small sized reads
	  (the current readahead code insists on seeing all requests)

	- doing a lot of pointless page-cache lookups for small cached files
	  (the current readahead only turns itself off after 256 cache hits,
	  unfortunately most files are < 1MB, so never see that chance)

That accounts for speedup of
	- 0.3% on 1-page sequential reads on sparse file
	- 1.2% on 1-page cache hot sequential reads
	- 3.2% on 256-page cache hot sequential reads
	- 1.3% on cache hot `tar /lib`

However, it does introduce one extra page-cache lookup per cache miss, which
impacts random reads slightly. That's 1% overheads for 1-page random reads on
sparse file.

PERFORMANCE

The basic benchmark setup is
	- 2.6.20 kernel with on-demand readahead
	- 1MB max readahead size
	- 2.9GHz Intel Core 2 CPU
	- 2GB memory
	- 160G/8M Hitachi SATA II 7200 RPM disk

The benchmarks show that
	- it maintains the same performance for trivial sequential/random reads
	- sysbench/OLTP performance on MySQL gains up to 8%
	- performance on readahead thrashing gains up to 3 times

iozone throughput (KB/s): roughly the same
==========================================
iozone -c -t1 -s 4096m -r 64k

			       2.6.20          on-demand      gain
first run
	  "  Initial write "   61437.27        64521.53      +5.0%
	  "        Rewrite "   47893.02        48335.20      +0.9%
	  "           Read "   62111.84        62141.49      +0.0%
	  "        Re-read "   62242.66        62193.17      -0.1%
	  "   Reverse Read "   50031.46        49989.79      -0.1%
	  "    Stride read "    8657.61         8652.81      -0.1%
	  "    Random read "   13914.28        13898.23      -0.1%
	  " Mixed workload "   19069.27        19033.32      -0.2%
	  "   Random write "   14849.80        14104.38      -5.0%
	  "         Pwrite "   62955.30        65701.57      +4.4%
	  "          Pread "   62209.99        62256.26      +0.1%

second run
	  "  Initial write "   60810.31        66258.69      +9.0%
	  "        Rewrite "   49373.89        57833.66     +17.1%
	  "           Read "   62059.39        62251.28      +0.3%
	  "        Re-read "   62264.32        62256.82      -0.0%
	  "   Reverse Read "   49970.96        50565.72      +1.2%
	  "    Stride read "    8654.81         8638.45      -0.2%
	  "    Random read "   13901.44        13949.91      +0.3%
	  " Mixed workload "   19041.32        19092.04      +0.3%
	  "   Random write "   14019.99        14161.72      +1.0%
	  "         Pwrite "   64121.67        68224.17      +6.4%
	  "          Pread "   62225.08        62274.28      +0.1%

In summary, writes are unstable, reads are pretty close on average:

			  access pattern  2.6.20  on-demand   gain
				   Read  62085.61  62196.38  +0.2%
				Re-read  62253.49  62224.99  -0.0%
			   Reverse Read  50001.21  50277.75  +0.6%
			    Stride read   8656.21   8645.63  -0.1%
			    Random read  13907.86  13924.07  +0.1%
	 		 Mixed workload  19055.29  19062.68  +0.0%
				  Pread  62217.53  62265.27  +0.1%

aio-stress: roughly the same
============================
aio-stress -l -s4096 -r128 -t1 -o1 knoppix511-dvd-cn.iso
aio-stress -l -s4096 -r128 -t1 -o3 knoppix511-dvd-cn.iso

					2.6.20      on-demand  delta
			sequential	 92.57s      92.54s    -0.0%
			random		311.87s     312.15s    +0.1%

sysbench fileio: roughly the same
=================================
sysbench --test=fileio --file-io-mode=async --file-test-mode=rndrw \
	 --file-total-size=4G --file-block-size=64K \
	 --num-threads=001 --max-requests=10000 --max-time=900 run

				threads    2.6.20   on-demand    delta
		first run
				      1   59.1974s    59.2262s  +0.0%
				      2   58.0575s    58.2269s  +0.3%
				      4   48.0545s    47.1164s  -2.0%
				      8   41.0684s    41.2229s  +0.4%
				     16   35.8817s    36.4448s  +1.6%
				     32   32.6614s    32.8240s  +0.5%
				     64   23.7601s    24.1481s  +1.6%
				    128   24.3719s    23.8225s  -2.3%
				    256   23.2366s    22.0488s  -5.1%

		second run
				      1   59.6720s    59.5671s  -0.2%
				      8   41.5158s    41.9541s  +1.1%
				     64   25.0200s    23.9634s  -4.2%
				    256   22.5491s    20.9486s  -7.1%

Note that the numbers are not very stable because of the writes.
The overall performance is close when we sum all seconds up:

                sum all up               495.046s    491.514s   -0.7%

sysbench oltp (trans/sec): up to 8% gain
========================================
sysbench --test=oltp --oltp-table-size=10000000 --oltp-read-only \
	 --mysql-socket=/var/run/mysqld/mysqld.sock \
	 --mysql-user=root --mysql-password=readahead \
	 --num-threads=064 --max-requests=10000 --max-time=900 run

	10000-transactions run
				threads    2.6.20   on-demand    gain
				      1     62.81       64.56   +2.8%
				      2     67.97       70.93   +4.4%
				      4     81.81       85.87   +5.0%
				      8     94.60       97.89   +3.5%
				     16     99.07      104.68   +5.7%
				     32     95.93      104.28   +8.7%
				     64     96.48      103.68   +7.5%
	5000-transactions run
				      1     48.21       48.65   +0.9%
				      8     68.60       70.19   +2.3%
				     64     70.57       74.72   +5.9%
	2000-transactions run
				      1     37.57       38.04   +1.3%
				      2     38.43       38.99   +1.5%
				      4     45.39       46.45   +2.3%
				      8     51.64       52.36   +1.4%
				     16     54.39       55.18   +1.5%
				     32     52.13       54.49   +4.5%
				     64     54.13       54.61   +0.9%

That's interesting results. Some investigations show that
	- MySQL is accessing the db file non-uniformly: some parts are
	  more hot than others
	- It is mostly doing 4-page random reads, and sometimes doing two
	  reads in a row, the latter one triggers a 16-page readahead.
	- The on-demand readahead leaves many lookahead pages (flagged
	  PG_readahead) there. Many of them will be hit, and trigger
	  more readahead pages. Which might save more seeks.
	- Naturally, the readahead windows tend to lie in hot areas,
	  and the lookahead pages in hot areas is more likely to be hit.
	- The more overall read density, the more possible gain.

That also explains the adaptive readahead tricks for clustered random reads.

readahead thrashing: 3 times better
===================================
We boot kernel with "mem=128m single", and start a 100KB/s stream on every
second, until reaching 200 streams.

			      max throughput     min avg I/O size
		2.6.20:            5MB/s               16KB
		on-demand:        15MB/s              140KB
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Extend struct file_ra_state to support the on-demand readahead logic.  Also
define some helpers for it.
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Define two convenient macros for read-ahead:
	- MAX_RA_PAGES: rounded down counterpart of VM_MAX_READAHEAD
	- MIN_RA_PAGES: rounded _up_ counterpart of VM_MIN_READAHEAD

Note that the rounded up MIN_RA_PAGES will work flawlessly with _large_
page sizes like 64k.
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add look-ahead support to __do_page_cache_readahead().

It works by
	- mark the Nth backwards page with PG_readahead,
	(which instructs the page's first reader to invoke readahead)
	- and only do the marking for newly allocated pages.
	(to prevent blindly doing readahead on already cached pages)

Look-ahead is a technique to achieve I/O pipelining:

While the application is working through a chunk of cached pages, the kernel
reads-ahead the next chunk of pages _before_ time of need.  It effectively
hides low level I/O latencies to high level applications.
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce a new page flag: PG_readahead.

It acts as a look-ahead mark, which tells the page reader: Hey, it's time to
invoke the read-ahead logic.  For the sake of I/O pipelining, don't wait until
it runs out of cached pages!
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

page_mkclean() doesn't re-protect ptes for non-linear mappings, so a later
re-dirty through such a mapping will not generate a fault, PG_dirty will
not reflect the dirty state and the dirty count will be skewed.  This
implies that msync() is also currently broken for nonlinear mappings.

The easiest solution is to emulate remap_file_pages on non-linear mappings
with simple mmap() for non ram-backed filesystems.  Applications continue
to work (albeit slower), as long as the number of remappings remain below
the maximum vma count.

However all currently known real uses of non-linear mappings are for ram
backed filesystems, which this patch doesn't affect.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix msync data loss and (less importantly) dirty page accounting
inaccuracies due to the race remaining in clear_page_dirty_for_io().

The deleted comment explains what the race was, and the added comments
explain how it is fixed.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch completes Linus's wish that the fault return codes be made into
bit flags, which I agree makes everything nicer.  This requires requires
all handle_mm_fault callers to be modified (possibly the modifications
should go further and do things like fault accounting in handle_mm_fault --
however that would be for another patch).

[akpm@linux-foundation.org: fix alpha build]
[akpm@linux-foundation.org: fix s390 build]
[akpm@linux-foundation.org: fix sparc build]
[akpm@linux-foundation.org: fix sparc64 build]
[akpm@linux-foundation.org: fix ia64 build]
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: NKyle McMartin <kyle@mcmartin.ca>
Acked-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NAndi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
[ Still apparently needs some ARM and PPC loving - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change ->fault prototype.  We now return an int, which contains
VM_FAULT_xxx code in the low byte, and FAULT_RET_xxx code in the next byte.
 FAULT_RET_ code tells the VM whether a page was found, whether it has been
locked, and potentially other things.  This is not quite the way he wanted
it yet, but that's changed in the next patch (which requires changes to
arch code).

This means we no longer set VM_CAN_INVALIDATE in the vma in order to say
that a page is locked which requires filemap_nopage to go away (because we
can no longer remain backward compatible without that flag), but we were
going to do that anyway.

struct fault_data is renamed to struct vm_fault as Linus asked. address
is now a void __user * that we should firmly encourage drivers not to use
without really good reason.

The page is now returned via a page pointer in the vm_fault struct.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__do_fault() was calling ->page_mkwrite() with the page lock held, which
violates the locking rules for that callback.  Release and retake the page
lock around the callback to avoid deadlocking file systems which manually
take it.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes
the virtual address -> file offset differently from linear mappings.

->populate is a layering violation because the filesystem/pagecache code
should need to know anything about the virtual memory mapping.  The hitch here
is that the ->nopage handler didn't pass down enough information (ie.  pgoff).
 But it is more logical to pass pgoff rather than have the ->nopage function
calculate it itself anyway (because that's a similar layering violation).

Having the populate handler install the pte itself is likewise a nasty thing
to be doing.

This patch introduces a new fault handler that replaces ->nopage and
->populate and (later) ->nopfn.  Most of the old mechanism is still in place
so there is a lot of duplication and nice cleanups that can be removed if
everyone switches over.

The rationale for doing this in the first place is that nonlinear mappings are
subject to the pagefault vs invalidate/truncate race too, and it seemed stupid
to duplicate the synchronisation logic rather than just consolidate the two.

After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in
pagecache.  Seems like a fringe functionality anyway.

NOPAGE_REFAULT is removed.  This should be implemented with ->fault, and no
users have hit mainline yet.

[akpm@linux-foundation.org: cleanup]
[randy.dunlap@oracle.com: doc. fixes for readahead]
[akpm@linux-foundation.org: build fix]
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the race between invalidate_inode_pages and do_no_page.

Andrea Arcangeli identified a subtle race between invalidation of pages from
pagecache with userspace mappings, and do_no_page.

The issue is that invalidation has to shoot down all mappings to the page,
before it can be discarded from the pagecache.  Between shooting down ptes to
a particular page, and actually dropping the struct page from the pagecache,
do_no_page from any process might fault on that page and establish a new
mapping to the page just before it gets discarded from the pagecache.

The most common case where such invalidation is used is in file truncation.
This case was catered for by doing a sort of open-coded seqlock between the
file's i_size, and its truncate_count.

Truncation will decrease i_size, then increment truncate_count before
unmapping userspace pages; do_no_page will read truncate_count, then find the
page if it is within i_size, and then check truncate_count under the page
table lock and back out and retry if it had subsequently been changed (ptl
will serialise against unmapping, and ensure a potentially updated
truncate_count is actually visible).

Complexity and documentation issues aside, the locking protocol fails in the
case where we would like to invalidate pagecache inside i_size.  do_no_page
can come in anytime and filemap_nopage is not aware of the invalidation in
progress (as it is when it is outside i_size).  The end result is that
dangling (->mapping == NULL) pages that appear to be from a particular file
may be mapped into userspace with nonsense data.  Valid mappings to the same
place will see a different page.

Andrea implemented two working fixes, one using a real seqlock, another using
a page->flags bit.  He also proposed using the page lock in do_no_page, but
that was initially considered too heavyweight.  However, it is not a global or
per-file lock, and the page cacheline is modified in do_no_page to increment
_count and _mapcount anyway, so a further modification should not be a large
performance hit.  Scalability is not an issue.

This patch implements this latter approach.  ->nopage implementations return
with the page locked if it is possible for their underlying file to be
invalidated (in that case, they must set a special vm_flags bit to indicate
so).  do_no_page only unlocks the page after setting up the mapping
completely.  invalidation is excluded because it holds the page lock during
invalidation of each page (and ensures that the page is not mapped while
holding the lock).

This also allows significant simplifications in do_no_page, because we have
the page locked in the right place in the pagecache from the start.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allocate/release a chunk of vmalloc address space:
 alloc_vm_area reserves a chunk of address space, and makes sure all
 the pagetables are constructed for that address range - but no pages.

 free_vm_area releases the address space range.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NIan Pratt <ian.pratt@xensource.com>
Signed-off-by: NChristian Limpach <Christian.Limpach@cl.cam.ac.uk>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Cc: "Jan Beulich" <JBeulich@novell.com>
Cc: "Andi Kleen" <ak@muc.de>

Add a kstrndup function, modelled on strndup.  Like strndup this
returns a string copied into its own allocated memory, but it copies
no more than the specified number of bytes from the source.

Remove private strndup() from irda code.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@mandriva.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Panagiotis Issaris <takis@issaris.org>
Cc: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>

Our original NFSv4 delegation policy was to give out a read delegation on any
open when it was possible to.

Since the lifetime of a delegation isn't limited to that of an open, a client
may quite reasonably hang on to a delegation as long as it has the inode
cached.  This becomes an obvious problem the first time a client's inode cache
approaches the size of the server's total memory.

Our first quick solution was to add a hard-coded limit.  This patch makes a
mild incremental improvement by varying that limit according to the server's
total memory size, allowing at most 4 delegations per megabyte of RAM.

My quick back-of-the-envelope calculation finds that in the worst case (where
every delegation is for a different inode), a delegation could take about
1.5K, which would make the worst case usage about 6% of memory.  The new limit
works out to be about the same as the old on a 1-gig server.

[akpm@linux-foundation.org: Don't needlessly bloat vmlinux]
[akpm@linux-foundation.org: Make it right for highmem machines]
Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

currently the export_operation structure and helpers related to it are in
fs.h.  fs.h is already far too large and there are very few places needing the
export bits, so split them off into a separate header.

[akpm@linux-foundation.org: fix cifs build]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

KSYM_NAME_LEN is peculiar in that it does not include the space for the
trailing '\0', forcing all users to use KSYM_NAME_LEN + 1 when allocating
buffer.  This is nonsense and error-prone.  Moreover, when the caller
forgets that it's very likely to subtly bite back by corrupting the stack
because the last position of the buffer is always cleared to zero.

This patch increments KSYM_NAME_LEN by one and updates code accordingly.

* off-by-one bug in asm-powerpc/kprobes.h::kprobe_lookup_name() macro
  is fixed.

* Where MODULE_NAME_LEN and KSYM_NAME_LEN were used together,
  MODULE_NAME_LEN was treated as if it didn't include space for the
  trailing '\0'.  Fix it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NPaulo Marques <pmarques@grupopie.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The bounce buffer logic is included on systems that do not need it.  If a
system does not have zones like ZONE_DMA and ZONE_HIGHMEM that can lead to
the use of bounce buffers then there is no need to reserve memory pools etc
etc.  This is true f.e.  for SGI Altix.

Also nicifies the Makefile and gets rid of the tricky "and" there.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, the freezer treats all tasks as freezable, except for the kernel
threads that explicitly set the PF_NOFREEZE flag for themselves.  This
approach is problematic, since it requires every kernel thread to either
set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't
care for the freezing of tasks at all.

It seems better to only require the kernel threads that want to or need to
be frozen to use some freezer-related code and to remove any
freezer-related code from the other (nonfreezable) kernel threads, which is
done in this patch.

The patch causes all kernel threads to be nonfreezable by default (ie.  to
have PF_NOFREEZE set by default) and introduces the set_freezable()
function that should be called by the freezable kernel threads in order to
unset PF_NOFREEZE.  It also makes all of the currently freezable kernel
threads call set_freezable(), so it shouldn't cause any (intentional)
change of behaviour to appear.  Additionally, it updates documentation to
describe the freezing of tasks more accurately.

[akpm@linux-foundation.org: build fixes]
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NNigel Cunningham <nigel@nigel.suspend2.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is a bug to set a page dirty if it is not uptodate unless it has
buffers.  If the page has buffers, then the page may be dirty (some buffers
dirty) but not uptodate (some buffers not uptodate).  The exception to this
rule is if the set_page_dirty caller is racing with truncate or invalidate.

A buffer can not be set dirty if it is not uptodate.

If either of these situations occurs, it indicates there could be some data
loss problem.  Some of these warnings could be a harmless one where the
page or buffer is set uptodate immediately after it is dirtied, however we
should fix those up, and enforce this ordering.

Bring the order of operations for truncate into line with those of
invalidate.  This will prevent a page from being able to go !uptodate while
we're holding the tree_lock, which is probably a good thing anyway.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We currently cannot disable CONFIG_SLUB_DEBUG for CONFIG_NUMA.  Now that
embedded systems start to use NUMA we may need this.

Put an #ifdef around places where NUMA only code uses fields only valid
for CONFIG_SLUB_DEBUG.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sysfs can do a gazillion things when called.  Make sure that we do not call
any sysfs functions while holding the slub_lock.

Just protect the essentials:

1. The list of all slab caches
2. The kmalloc_dma array
3. The ref counters of the slabs.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The objects per slab increase with the current patches in mm since we allow up
to order 3 allocs by default.  More patches in mm actually allow to use 2M or
higher sized slabs.  For slab validation we need per object bitmaps in order
to check a slab.  We end up with up to 64k objects per slab resulting in a
potential requirement of 8K stack space.  That does not look good.

Allocate the bit arrays via kmalloc.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>