When hns3_get_ring_config()/hns3_queue_to_ring()/
hns3_get_vector_ring_chain() failed during resetting, the allocated
memory has not been freed before these three functions return. So
this patch adds error handler in these functions to fix it.

Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When hns3_nic_init_vector_data() fails to map ring to vector,
it should cancel the netif_napi_add() that has been successfully
done and then exits.

Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As shown by Dmitris, we need to use csum_block_add() instead of csum_add()
when adding the FCS contribution to skb csum.

Before 4.18 (more exactly commit 88078d98 "net: pskb_trim_rcsum()
and CHECKSUM_COMPLETE are friends"), the whole skb csum was thrown away,
so RXFCS changes were ignored.

Then before commit d55bef50 ("net: fix pskb_trim_rcsum_slow() with
odd trim offset") both mlx5 and pskb_trim_rcsum_slow() bugs were canceling
each other.

Now we fixed pskb_trim_rcsum_slow() we need to fix mlx5.

Note that this patch also rewrites mlx5e_get_fcs() to :

- Use skb_header_pointer() instead of reinventing it.
- Use __get_unaligned_cpu32() to avoid possible non aligned accesses
  as Dmitris pointed out.

Fixes: 902a5459 ("net/mlx5e: When RXFCS is set, add FCS data into checksum calculation")
Reported-by: NPaweł Staszewski <pstaszewski@itcare.pl>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Eran Ben Elisha <eranbe@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Dimitris Michailidis <dmichail@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Paweł Staszewski <pstaszewski@itcare.pl>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Tested-By: NMaria Pasechnik <mariap@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The idx in vhost_vring_ioctl() was controlled by userspace, hence a
potential exploitation of the Spectre variant 1 vulnerability.

Fixing this by sanitizing idx before using it to index d->vqs.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a warning from checkpatch.pl:'please no space before tabs'
in include/net/af_unix.h
Signed-off-by: NBo YU <tsu.yubo@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a warning from checkpatch:
function definition argument 'struct sock *' should also have an
identifier name in include/net/af_unix.h.
Signed-off-by: NBo YU <tsu.yubo@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in dev_err message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mvpp2 driver has the curious behaviour of passing a stack variable
to irq_set_affinity_hint(), which results in the kernel exploding
the first time anyone accesses this information. News flash: userspace
does, and irqbalance will happily take the machine down. Great stuff.

An easy fix is to track the mask within the queue_vector structure,
and to make sure it has the same lifetime as the interrupt itself.

Fixes: e531f767 ("net: mvpp2: handle cases where more CPUs are available than s/w threads")
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Abdul Haleem reported a build error on ppc :

drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: `struct
iphdr` declared inside parameter list [enabled by default]
           struct iphdr *iph)
                  ^
drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is
only this definition or declaration, which is probably not what you want
[enabled by default]
drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function
get_fixed_ipv4_csum:
drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing
pointer to incomplete type
  __u8 ipproto = iph->protocol;
                    ^

Fixes: 55469bc6 ("drivers: net: remove <net/busy_poll.h> inclusion when not needed")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAbdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an FDB entry is configured, the address is validated to have the
length of an Ethernet address, but the device for which the address is
configured can be of any type.

The above can result in the use of uninitialized memory when the address
is later compared against existing addresses since 'dev->addr_len' is
used and it may be greater than ETH_ALEN, as with ip6tnl devices.

Fix this by making sure that FDB entries are only configured for
Ethernet devices.

BUG: KMSAN: uninit-value in memcmp+0x11d/0x180 lib/string.c:863
CPU: 1 PID: 4318 Comm: syz-executor998 Not tainted 4.19.0-rc3+ #49
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x14b/0x190 lib/dump_stack.c:113
  kmsan_report+0x183/0x2b0 mm/kmsan/kmsan.c:956
  __msan_warning+0x70/0xc0 mm/kmsan/kmsan_instr.c:645
  memcmp+0x11d/0x180 lib/string.c:863
  dev_uc_add_excl+0x165/0x7b0 net/core/dev_addr_lists.c:464
  ndo_dflt_fdb_add net/core/rtnetlink.c:3463 [inline]
  rtnl_fdb_add+0x1081/0x1270 net/core/rtnetlink.c:3558
  rtnetlink_rcv_msg+0xa0b/0x1530 net/core/rtnetlink.c:4715
  netlink_rcv_skb+0x36e/0x5f0 net/netlink/af_netlink.c:2454
  rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4733
  netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
  netlink_unicast+0x1638/0x1720 net/netlink/af_netlink.c:1343
  netlink_sendmsg+0x1205/0x1290 net/netlink/af_netlink.c:1908
  sock_sendmsg_nosec net/socket.c:621 [inline]
  sock_sendmsg net/socket.c:631 [inline]
  ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114
  __sys_sendmsg net/socket.c:2152 [inline]
  __do_sys_sendmsg net/socket.c:2161 [inline]
  __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159
  __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159
  do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291
  entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440ee9
Code: e8 cc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff6a93b518 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440ee9
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000003
RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000213 R12: 000000000000b4b0
R13: 0000000000401ec0 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
  kmsan_save_stack_with_flags mm/kmsan/kmsan.c:256 [inline]
  kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:181
  kmsan_kmalloc+0x98/0x100 mm/kmsan/kmsan_hooks.c:91
  kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:100
  slab_post_alloc_hook mm/slab.h:446 [inline]
  slab_alloc_node mm/slub.c:2718 [inline]
  __kmalloc_node_track_caller+0x9e7/0x1160 mm/slub.c:4351
  __kmalloc_reserve net/core/skbuff.c:138 [inline]
  __alloc_skb+0x2f5/0x9e0 net/core/skbuff.c:206
  alloc_skb include/linux/skbuff.h:996 [inline]
  netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline]
  netlink_sendmsg+0xb49/0x1290 net/netlink/af_netlink.c:1883
  sock_sendmsg_nosec net/socket.c:621 [inline]
  sock_sendmsg net/socket.c:631 [inline]
  ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114
  __sys_sendmsg net/socket.c:2152 [inline]
  __do_sys_sendmsg net/socket.c:2161 [inline]
  __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159
  __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159
  do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291
  entry_SYSCALL_64_after_hwframe+0x63/0xe7

v2:
* Make error message more specific (David)

Fixes: 090096bf ("net: generic fdb support for drivers without ndo_fdb_<op>")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reported-and-tested-by: syzbot+3a288d5f5530b901310e@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+d53ab4e92a1db04110ff@syzkaller.appspotmail.com
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When getting pr_assocstatus and pr_streamstatus by sctp_getsockopt,
it doesn't correctly process the case when policy is set with
SCTP_PR_SCTP_ALL | SCTP_PR_SCTP_MASK. It even causes a
slab-out-of-bounds in sctp_getsockopt_pr_streamstatus().

This patch fixes it by return -EINVAL for this case.

Fixes: 0ac1077e ("sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL")
Reported-by: syzbot+5da0d0a72a9e7d791748@syzkaller.appspotmail.com
Suggested-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a transport is removed by asconf but there still are some chunks with
this transport queuing on out_chunk_list, later an use-after-free issue
will be caused when accessing this transport from these chunks in
sctp_outq_flush().

This is an old bug, we fix it by clearing the transport of these chunks
in out_chunk_list when removing a transport in sctp_assoc_rm_peer().

Reported-by: syzbot+56a40ceee5fb35932f4d@syzkaller.appspotmail.com
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Couple of fixes

First patch makes sure mlxsw does not ignore user requests to delete FDB
entries that were learned by the device.

Second patch fixes a use-after-free that can be triggered by requesting
a reload via devlink when the previous reload failed.

Please consider both patches for stable. They apply cleanly to both
4.18.y and 4.19.y.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After a failed reload, the driver is still registered to devlink, its
devlink instance is still allocated and the 'reload_fail' flag is set.
Then, in the next reload try, the driver's allocated devlink instance will
be freed without unregistering from devlink and its components (e.g,
resources). This scenario can cause a use-after-free if the user tries to
execute command via devlink user-space tool.

Fix by not freeing the devlink instance during reload (failed or not).

Fixes: 24cc68ad ("mlxsw: core: Add support for reload")
Signed-off-by: NShalom Toledo <shalomt@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Demands to remove FDB entries should be honored even if the FDB entry in
question was originally learned, and not added by the user. Therefore
ignore the added_by_user datum for SWITCHDEV_FDB_DEL_TO_DEVICE.

Fixes: 816a3bed ("switchdev: Add fdb.added_by_user to switchdev notifications")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Suggested-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clang warns:

drivers/net/ethernet/huawei/hinic/hinic_tx.c:392:34: error: implicit
conversion from enumeration type 'enum hinic_l4_tunnel_type' to
different enumeration type 'enum hinic_l4_offload_type'
[-Werror,-Wenum-conversion]
                hinic_task_set_tunnel_l4(task, TUNNEL_UDP_NO_CSUM,
                ~~~~~~~~~~~~~~~~~~~~~~~~       ^~~~~~~~~~~~~~~~~~
1 error generated.

It seems that hinic_task_set_tunnel_l4 was meant to take an enum of type
hinic_l4_tunnel_type, not hinic_l4_offload_type, given both the name of
the functions and the values used.

Fixes: cc18a754 ("net-next/hinic: add checksum offload and TSO support")
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch documents the tcp_fwmark_accept sysctl that was
added in 3.15.
Signed-off-by: NLorenzo Colitti <lorenzo@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The attribute IFLA_BOND_AD_ACTOR_SYSTEM is sent to user space having the
length of sizeof(bond->params.ad_actor_system) which is 8 byte. This
patch aligns the length to ETH_ALEN to have the same MAC address exposed
as using sysfs.

Fixes: f87fda00 ("bonding: prevent out of bound accesses")
Signed-off-by: NTobias Jungel <tobias.jungel@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similiar with ipv6 mcast commit 89225d1c ("net: ipv6: mld: fix v1/v2
switchback timeout to rfc3810, 9.12.")

i) RFC3376 8.12. Older Version Querier Present Timeout says:

   The Older Version Querier Interval is the time-out for transitioning
   a host back to IGMPv3 mode once an older version query is heard.
   When an older version query is received, hosts set their Older
   Version Querier Present Timer to Older Version Querier Interval.

   This value MUST be ((the Robustness Variable) times (the Query
   Interval in the last Query received)) plus (one Query Response
   Interval).

Currently we only use a hardcode value IGMP_V1/v2_ROUTER_PRESENT_TIMEOUT.
Fix it by adding two new items mr_qi(Query Interval) and mr_qri(Query Response
Interval) in struct in_device.

Now we can calculate the switchback time via (mr_qrv * mr_qi) + mr_qri.
We need update these values when receive IGMPv3 queries.
Reported-by: NYing Xu <yinxu@redhat.com>
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull ARM SoC platform updates from Arnd Bergmann:
 "A couple of platforms change hands in the MAINTAINERS file:

   - Linus Walleij lists himself for the ARM Reference platforms:
     versatile, vexpress, integrator and realview. He has been the main
     contributor for these for a while, and makes it official now.

   - Vladimir Zapolskiy takes over the LPC18xx platform from Joachim
     Eastwood

   - Manivannan Sadhasivam becomes a secondary maintainer for the
     Actions Semi machines

   - Nicolas Ferre lists updates the MAINTAINER listing for the AT91
     platform: Ludovic Desroches is now a co-maintainer for the
     platform, and several other people (Claudiu Beznea, Cristian
     Birsan, Eugen Hristev, Codrin Ciubotariu) take over individual
     device drivers.

  Thanks everyone for working on this, and welcome to the new
  maintainers!

  The "virt" platform on qemy or kvm can now be used in big-endian mode
  without additional tricks, thanks to Jason Donenfeld.

  Once again, we gain support for another NXP i.MX6 variant, this time
  it's the i.MX 6ULZ 32-bit single-core version.

  On arm64, we add support for two SoCs from Renesas: RZ/G2E (r8a774c0)
  and RZ/G2M (r8a774a1). These are described as microcontrollers on the
  manufacturer website, but appear to be rather powerful. The RZ/G2M is
  used on the reference board for the CIP Super Long Term Support (SLTS)
  Linux Kernels"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  MAINTAINERS: Assign myself as a maintainer of ARM/LPC18XX architecture
  arm64: exynos: Enable generic power domain support
  MAINTAINERS: remove non-exsiting email address of Baoyou
  MAINTAINERS: fix pattern in ARM/Synaptics berlin SoC section
  MAINTAINERS: Drop dt-bindings/genpd/k2g.h
  ARM: samsung: Limit SAMSUNG_PM_CHECK config option to non-Exynos platforms
  arm64: actions: Enable PINCTRL in platforms Kconfig
  MAINTAINERS: Add entry for Actions Semi Owl SoCs DMA driver
  MAINTAINERS: Add entry for Actions Semiconductor Owl I2C driver
  MAINTAINERS: Update clock binding entry for Actions Semi Owl SoCs
  ARM: imx: add i.mx6ulz msl support
  ARM: Assume maintainership of ARM reference designs
  ARM: support big-endian for the virt architecture
  MAINTAINERS: sdhci: move the Microchip entry to proper location
  MAINTAINERS: move former ATMEL entries to proper MICROCHIP location
  MAINTAINERS: remove the / ATMEL string from MICROCHIP entries
  MAINTAINERS: iio: add co-maintainer to SAMA5D2-compatible ADC driver
  MAINTAINERS: pwm: add entry for Microchip pwm driver
  MAINTAINERS: dmaengine: add files to Microchip dma entry
  MAINTAINERS: USB: change maintainer for Microchip USBA gadget driver
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "The most noteworthy SoC driver changes this time include:

   - The TEE subsystem gains an in-kernel interface to access the TEE
     from device drivers.

   - The reset controller subsystem gains a driver for the Qualcomm
     Snapdragon 845 Power Domain Controller.

   - The Xilinx Zynq platform now has a firmware interface for its
     platform management unit. This contains a firmware "ioctl"
     interface that was a little controversial at first, but the version
     we merged solved that by not exposing arbitrary firmware calls to
     user space.

   - The Amlogic Meson platform gains a "canvas" driver that is used for
     video processing and shared between different high-level drivers.

  The rest is more of the usual, mostly related to SoC specific power
  management support and core drivers in drivers/soc:

   - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new
     features related to power and reset control.

   - The Mediatek mt8183 and mt6765 SoC platforms gain support for their
     respective power management chips.

   - A new driver for NXP i.MX8, which need a firmware interface for
     power management.

   - The SCPI firmware interface now contains support estimating power
     usage of performance states

   - The NVIDIA Tegra "pmc" driver gains a few new features, in
     particular a pinctrl interface for configuring the pads.

   - Lots of small changes for Qualcomm, in particular the "smem" device
     driver.

   - Some cleanups for the TI OMAP series related to their sysc
     controller.

  Additional cleanups and bugfixes in SoC specific drivers include the
  Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits)
  firmware: tegra: bpmp: Implement suspend/resume support
  drivers: clk: Add ZynqMP clock driver
  dt-bindings: clock: Add bindings for ZynqMP clock driver
  firmware: xilinx: Add zynqmp IOCTL API for device control
  Documentation: xilinx: Add documentation for eemi APIs
  MAINTAINERS: imx: include drivers/firmware/imx path
  firmware: imx: add misc svc support
  firmware: imx: add SCU firmware driver support
  reset: Fix potential use-after-free in __of_reset_control_get()
  dt-bindings: arm: fsl: add scu binding doc
  soc: fsl: qbman: add interrupt coalesce changing APIs
  soc: fsl: bman_portals: defer probe after bman's probe
  soc: fsl: qbman: Use last response to determine valid bit
  soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan
  soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers
  soc: fsl: qbman: Check if CPU is offline when initializing portals
  reset: qcom: PDC Global (Power Domain Controller) reset controller
  dt-bindings: reset: Add PDC Global binding for SDM845 SoCs
  reset: Grammar s/more then once/more than once/
  bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
  ...

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "The defconfig changes are split out from the rest again. This time we
  have a number of changes for NXP i.MX and Renesas, including a cleanup
  of old options.

  Some smaller changes are for Socionext Uniphier, Allwinner, Qualcomm,
  Rockchip, Renesas, AT91, Hisilicon, and STM32. All of these just
  enable platform specific device drivers"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits)
  arm64: defconfig: Enable SERIAL_8250_OMAP
  arm64: defconfig: Enable TI_SCI related configs
  ARM: imx_v6_v7_defconfig: Select CONFIG_TMPFS_POSIX_ACL
  ARM: imx_v4_v5_defconfig: Remove unneeded options
  ARM: imx_v4_v5_defconfig: Re-sync defconfig
  ARM: mxs_defconfig: Remove unneeded options
  ARM: mxs_defconfig: Re-sync defconfig
  ARM: imx_v6_v7_defconfig: Remove unneeded options
  ARM: imx_v6_v7_defconfig: Re-sync defconfig
  ARM: imx_v6_v7_defconfig: select CONFIG_ARM_CPUIDLE by default
  ARM: imx_v6_v7_defconfig: Make usbnet drivers builtin for boot
  ARM: imx_v6_v7_defconfig: add CONFIG_FW_LOADER_USER_HELPER
  ARM: imx_v6_v7_defconfig: Select CONFIG_SENSORS_MC13783_ADC
  ARM: multi_v7_defconfig: enable CONFIG_MMC_UNIPHIER
  arm64: defconfig: enable CONFIG_MMC_UNIPHIER
  ARM: multi_v7_defconfig: Enable USB phys for UniPhier SoCs
  arm64: defconfig: Enable USB phys for UniPhier SoCs
  arm64: defconfig: enable Rockchip Innosilicon hdmiphy
  arm64: defconfig: Enable PCIEPORTBUS
  arm64: defconfig: enable HiSilicon HNS3 driver
  ...

Pull ARM SoC device tree updates from Arnd Bergmann:
 "There are close to 800 indivudal changesets in this branch again,
  which feels like a lot. There are particularly many changes for the
  NVIDIA Tegra platform this time, in fact more than it has seen in the
  two years since the v4.9 merge window. Aside from this, it's been
  fairly normal, with lots of changes going into Renesas R-CAR, NXP
  i.MX, Allwinner Sunxi, Samsung Exynos, and TI OMAP.

  Most of the changes are for adding new features into existing boards,
  for brevity I'm only mentioning completely new machines and SoCs here.
  For the first time I think we have (slightly) more new 64-bit hardware
  than 32-bit:

  Two boards get added for TI OMAP: Moxa UC-2101 is an industrial
  computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5 is a
  minor variation of the motherboards of the GTA04 phone, see
  https://shop.goldelico.com/wiki.php?page=GTA04A5

  Clearfog is a nice little board for quad-core Marvell Armada 8040
  network processor, see
  https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/

  Two additional server boards come with the Aspeed baseboard management
  controllers: Stardragon4800 is an arm64 reference platform made by HXT
  (based on Qualcomm's server chips), and TiogaPass is an Open Compute
  mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in the
  BMC.

  NXP i.MX usually sees a lot of new boards each release. This time
  there we only add one minor variant: ConnectCore 6UL SBC Pro uses the
  same SoM design as the ConnectCore 6UL SBC Express added later.
  However, there is a new chip, the i.MX6ULZ, which is an even smaller
  variant of the i.MX6ULL, with features removed. There is also support
  for the reference board design, the i.MX6ULZ 14x14 EVK.

  A new Raspberry Pi variant gets added, this one is the CM3 compute
  module based on bcm2837, it was launched in early 2017 but only now
  added to the kernel, both as 32-bit and as 64-bit files, as we tend to
  do for Raspberry Pi.

  On the Allwinner side, everything is again about cheap development
  boards, usually of the "Fruit Pi" variety. The new ones this time are:
   - Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/
   - Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/
   - Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts
   - Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html
  The last one of these is now a 64-bit version of the earlier Banana Pi
  M2+ H3, with the same board layout.

  Similarly, for Rockchips, get get another variant of the 32-bit Asus
  Tinker board, the model 'S' based on rk3288, and three now boards
  based on the popular RK3399 chip:
   - ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/
   - Rock960: https://www.96boards.org/product/rock960/
   - RockPro64: https://www.pine64.org/?page_id=61454
  These are all quite powerful boards with lots of RAM and I/O, and the
  RK3399 is the same chip used in several Chromebooks. Finally, we get
  support for the PX30 (aka rk3326) chip, which is based on the low-end
  64-bit Cortex-A35 CPU core. So far, only the evaluation board is
  supported.

  One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is
  based on the MT7622 WiFi router platform, and the first product I've
  seen with a 64-bit Mediatek chip in that market:
  http://www.banana-pi.org/r64.html

  For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370
  development board, which are similar to the Hi3660 and Hikey 360
  respectively, but add support for an NPU.

  Amlogic gets initial support for the Meson-G12A chip (S905D2), another
  quad-core Cortex-A53 SoC, and its evaluation platform. On the 32-bit
  side, we gain support for an actual end-user product, the Endless
  Computers Endless Mini based on Meson8b (S805), see
  https://endlessos.com/computers/

  Qualcomm adds support for their MSM8998 SoC and evaluation platform.
  This chip is commonly known as the Snapdragon 835, and is used in
  high-end phones as well as low-end laptops.

  For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added,
  but no boards for this one. However, we do add boards for the
  previously added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the
  M3NULCB Starter Kit Pro.

  While we have lots of DT changes for NVIDIA to update the existing
  files, the only board that gets added is the Toradex Colibri T20 on
  Colibri Evaluation Board for the old Tegra2.

  Synaptics add support for their AS370 SoC, which is part of the
  (formerly Marvell) Berlin line of set-top-box chips used e.g. in the
  various Google Chromecast. Only the .dtsi gets added at this point, no
  actual machines"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (721 commits)
  ARM: dts: socfgpa: remove ethernet aliases from dtsi
  arm64: dts: stratix10: add ethernet aliases
  dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI
  dt-bindings: mediatek: Add JPEG Decoder binding for MT7623
  dt-bindings: iommu: mediatek: Add binding for MT7623
  dt-bindings: clock: mediatek: add support for MT7623
  ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites
  ARM: dts: da850-lego-ev3: slow down A/DC as much as possible
  ARM: dts: da850-evm: Enable tca6416 on baseboard
  arm64: dts: uniphier: Add USB2 PHY nodes
  arm64: dts: uniphier: Add USB3 controller nodes
  ARM: dts: uniphier: Add USB2 PHY nodes
  ARM: dts: uniphier: Add USB3 controller nodes
  arm64: dts: meson-axg: s400: disable emmc
  arm64: dts: meson-axg: s400: add missing emmc pwrseq
  arm64: dts: clearfog-gt-8k: add PCIe slot description
  ARM: dts: at91: sama5d4_xplained: even nand memory partitions
  ARM: dts: at91: sama5d3_xplained: even nand memory partitions
  ARM: dts: at91: at91sam9x5cm: even nand memory partitions
  ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets
  ...

Pull parisc updates from Helge Deller:
 "Three small patches:

   - A boot fix for A500 machines, crash was caused by the new
     alternative patching code from this merge window (Dave)

   - Change __kernel_suseconds_t to match glibc on 64-bit parisc (Arnd)

   - Use constants instead of hard-coded numbers (me)"

* 'parisc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix A500 boot crash
  parisc: Use LINUX_GATEWAY_SPACE constant in entry.S
  parisc64: change __kernel_suseconds_t to match glibc

Pull i2c updates from Wolfram Sang:
 "I2C has not so much stuff this time. Mostly driver enablement for new
  SoCs, some driver bugfixes, and some cleanups"

* 'i2c/for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (35 commits)
  MAINTAINERS: add maintainer for Renesas RIIC driver
  i2c: sh_mobile: Remove dummy runtime PM callbacks
  i2c: uniphier-f: fix race condition when IRQ is cleared
  i2c: uniphier-f: fix occasional timeout error
  i2c: uniphier-f: make driver robust against concurrency
  i2c: i2c-qcom-geni: Simplify irq handler
  i2c: i2c-qcom-geni: Simplify tx/rx functions
  i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers
  i2c: mux: mlxcpld: simplify code to reach the adapter
  i2c: mux: ltc4306: simplify code to reach the adapter
  i2c: mux: pca954x: simplify code to reach the adapter
  i2c: core: remove level of indentation in i2c_transfer
  i2c: core: remove outdated DEBUG output
  i2c: zx2967: use core to detect 'no zero length' quirk
  i2c: tegra: use core to detect 'no zero length' quirk
  i2c: qup: use core to detect 'no zero length' quirk
  i2c: omap: use core to detect 'no zero length' quirk
  i2c: Convert to using %pOFn instead of device_node.name
  i2c: brcmstb: Allow enabling the driver on DSL SoCs
  eeprom: at24: fix unexpected timeout under high load
  ...

Pull media updates from Mauro Carvalho Chehab:

 - new dvb frontend driver: lnbh29

 - new sensor drivers: imx319 and imx 355

 - some old soc_camera driver renames to avoid conflict with new
   drivers

 - new i.MX Pixel Pipeline (PXP) mem-to-mem platform driver

 - a new V4L2 frontend for the FWHT codec

 - several other improvements, bug fixes, code cleanups, etc

* tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (289 commits)
  media: rename soc_camera I2C drivers
  media: cec: forgot to cancel delayed work
  media: vivid: Support 480p for webcam capture
  media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD
  media: vivid: Add 16-bit bayer to format list
  media: v4l2-tpg-core: Add 16-bit bayer
  media: pvrusb2: replace `printk` with `pr_*`
  media: venus: vdec: fix decoded data size
  media: cx231xx: fix potential sign-extension overflow on large shift
  media: dt-bindings: media: rcar_vin: add device tree support for r8a7744
  media: isif: fix a NULL pointer dereference bug
  media: exynos4-is: make const array config_ids static
  media: cx23885: make const array addr_list static
  media: ivtv: make const array addr_list static
  media: bttv-input: make const array addr_list static
  media: cx18: Don't check for address of video_dev
  media: dw9807-vcm: Fix probe error handling
  media: dw9714: Remove useless error message
  media: dw9714: Fix error handling in probe function
  media: cec: name for RC passthrough device does not need 'RC for'
  ...

The RIIC I2C controller is used in Renesas RZ/A SoCs.
Signed-off-by: NChris Brandt <chris.brandt@renesas.com>
[wsa: added documentation file]
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Platform drivers don't need dummy runtime PM callbacks that just return
success and non-NULL pm pointer in their struct device_driver in order
to have runtime PM happening. This has changed since following commits:

05aa55dd ("PM / Runtime: Lenient generic runtime pm callbacks")
543f2503 ("PM / platform_bus: Allow runtime PM by default")
8b313a38 ("PM / Platform: Use generic runtime PM callbacks directly")
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The current IRQ handler clears all the IRQ status bits when it bails
out. This is dangerous because it might clear away the status bits
that have just been set while processing the current handler. If this
happens, the IRQ event for the latest transfer is lost forever.

The IRQ status bits must be cleared *before* the next transfer is
kicked.

Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver")
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Currently, a timeout error could happen at a repeated START condition.

For a (non-repeated) START condition, the controller starts sending
data when the UNIPHIER_FI2C_CR_STA bit is set. However, for a repeated
START condition, the hardware starts running when the slave address is
written to the TX FIFO - the write to the UNIPHIER_FI2C_CR register is
actually unneeded.

Because the hardware is already running before the IRQ is enabled for
a repeated START, the driver may miss the IRQ event. In most cases,
this problem does not show up since modern CPUs are much faster than
the I2C transfer. However, it is still possible that a context switch
happens after the controller starts, but before the IRQ register is
set up.

To fix this,

 - Do not write UNIPHIER_FI2C_CR for repeated START conditions.

 - Enable IRQ *before* writing the slave address to the TX FIFO.

 - Disable IRQ for the current CPU while queuing up the TX FIFO;
   If the CPU is interrupted by some task, the interrupt handler
   might be invoked due to the empty TX FIFO before completing the
   setup.

Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver")
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This is unlikely to happen, but it is possible for a CPU to enter
the interrupt handler just after wait_for_completion_timeout() has
expired. If this happens, the hardware is accessed from multiple
contexts concurrently.

Disable the IRQ after wait_for_completion_timeout(), and do nothing
from the handler when the IRQ is disabled.

Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver")
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Commit 1ff2e1a4 ("HID: input: Create a utility class for counting
scroll events") created the helper function

    hid_scroll_counter_handle_scroll()

to handle high-res scroll events and also expose them as regular wheel
events.

But the resulting algorithm was unstable, and causes scrolling to be
very unreliable.  When you hit the half-way mark of the highres
multiplier, small highres movements will incorrectly translate into big
traditional wheel movements, causing odd jitters.

Simplify the code and make the output stable.

NOTE! I'm pretty sure this will need further tweaking.  But this at
least turns a unusable mouse wheel on my Logitech MX Anywhere 2S into
a usable one.

Cc: Jiri Kosina <jikos@kernel.org>
Cc: Harry Cutts <hcutts@chromium.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull tty/serial updates from Greg KH:
 "Here is the big tty and serial pull request for 4.20-rc1

  Lots of little things here, including a merge from the SPI tree in
  order to keep things simpler for everyone to sync around for one
  platform.

  Major stuff is:

   - tty buffer clearing after use

   - atmel_serial fixes and additions

   - xilinx uart driver updates

  and of course, lots of tiny fixes and additions to individual serial
  drivers.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'tty-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits)
  of: base: Change logic in of_alias_get_alias_list()
  of: base: Fix english spelling in of_alias_get_alias_list()
  serial: sh-sci: do not warn if DMA transfers are not supported
  serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES
  tty: check name length in tty_find_polling_driver()
  serial: sh-sci: Add r8a77990 support
  tty: wipe buffer if not echoing data
  tty: wipe buffer.
  serial: fsl_lpuart: Remove the alias node dependence
  TTY: sn_console: Replace spin_is_locked() with spin_trylock()
  Revert "serial:serial_core: Allow use of CTS for PPS line discipline"
  serial: 8250_uniphier: add auto-flow-control support
  serial: 8250_uniphier: flatten probe function
  serial: 8250_uniphier: remove unused "fifo-size" property
  dt-bindings: serial: sh-sci: Document r8a7744 bindings
  serial: uartps: Fix missing unlock on error in cdns_get_id()
  tty/serial: atmel: add ISO7816 support
  tty/serial_core: add ISO7816 infrastructure
  serial:serial_core: Allow use of CTS for PPS line discipline
  serial: docs: Fix filename for serial reference implementation
  ...

Pull staging/IIO driver updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 4.20-rc1.

  There are lots of things here, we ended up adding more lines than
  removing, thanks to a large influx of Comedi National Instrument
  device support. Someday soon we need to get comedi out of staging...

  Other than the comedi drivers, the "big" things here are:

   - new iio drivers

   - delete dgnc driver (no one used it and no one had the hardware
     anymore)

   - vbox driver updates and fixes

   - erofs fixes

   - tons and tons of tiny checkpatch fixes for almost all staging
     drivers

  All of these have been in linux-next, with the last few happening a
  bit "late" due to them getting stuck on my laptop during travel to the
  Mantainers summit"

* tag 'staging-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (690 commits)
  staging: gasket: Fix sparse "incorrect type in assignment" warnings.
  staging: gasket: remove debug logs for callback invocation
  staging: gasket: remove debug logs in page table mapping calls
  staging: rtl8188eu: core: Use sizeof(*p) instead of sizeof(struct P) for memory allocation
  staging: ks7010: Remove extra blank line
  staging: gasket: Remove extra blank line
  staging: media: davinci_vpfe: Fix spelling mistake in enum
  staging: speakup: Add a pair of braces
  staging: wlan-ng: Replace long int with long
  staging: MAINTAINERS: remove obsolete IPX staging directory
  staging: MAINTAINERS: remove NCP filesystem entry
  staging: rtl8188eu: cleanup comparsions to false
  staging: gasket: Update device virtual address comment
  staging: gasket: sysfs: fix attribute release comment
  staging: gasket: apex: fix sysfs_show
  staging: gasket: page_table: simplify gasket_components_to_dev_address
  staging: gasket: page_table: fix comment in components_to_dev_address
  staging: gasket: page table: fixup error path allocating coherent mem
  staging: gasket: page_table: rearrange gasket_page_table_entry
  staging: gasket: page_table: remove unnecessary PTE status set to free
  ...

Pull mailbox updates from Jassi Brar:

 - convert print users to use the %pOFn format specifier

 - enable ti-msgmr driver for the K3 platform as well

 - add QCS404 to compatible list of QCOM's APCS IPC driver

 - minor spelling fixes toogle -> toggle

 - kzalloc failure catch in Mediatek driver

* tag 'mailbox-v4.20' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: mediatek: Add check for possible failure of kzalloc
  mailbox: bcm-flexrm-mailbox: fix spelling mistake "toogle" -> "toggle"
  mailbox: qcom: Add QCS404 APPS Global compatible
  drivers: mailbox: Make ti-msgmr driver depend on ARCH_K3
  mailbox: Convert to using %pOFn instead of device_node.name

Merge tag 'filesystems_for_v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

Pull ext2 and udf updates from Jan Kara:
 "Small ext2 cleanups and a couple of udf fixes"

* tag 'filesystems_for_v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2: remove redundant building macro check
  udf: Drop pack pragma from udf_sb.h
  udf: Drop freed bitmap / table support
  udf: Fix crash during mount
  udf: Prevent write-unsupported filesystem to be remounted read-write
  ext2: cache NULL when both default_acl and acl are NULL
  udf: remove unused variables group_start and nr_groups

Pull fsnotify updates from Jan Kara:
 "Amir's patches to implement superblock fanotify watches, Xiaoming's
  patch to enable reporting of thread IDs in fanotify events instead of
  TGIDs (sadly the patch got mis-attributed to Amir and I've noticed
  only now), and a fix of possible oops on umount caused by fsnotify
  infrastructure"

* tag 'for_v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: Fix busy inodes during unmount
  fs: group frequently accessed fields of struct super_block together
  fanotify: support reporting thread id instead of process id
  fanotify: add BUILD_BUG_ON() to count the bits of fanotify constants
  fsnotify: convert runtime BUG_ON() to BUILD_BUG_ON()
  fanotify: deprecate uapi FAN_ALL_* constants
  fanotify: simplify handling of FAN_ONDIR
  fsnotify: generalize handling of extra event flags
  fanotify: fix collision of internal and uapi mark flags
  fanotify: store fanotify_init() flags in group's fanotify_data
  fanotify: add API to attach/detach super block mark
  fsnotify: send path type events to group with super block marks
  fsnotify: add super block object type

Pull 9p updates from Dominique Martinet:
 "Highlights this time around are the end of Matthew's work to remove
  the custom 9p request cache and use a slab directly for requests, with
  some extra patches on my end to not degrade performance, but it's a
  very good cleanup.

  Tomas and I fixed a few more syzkaller bugs (refcount is the big one),
  and I had a go at the coverity bugs and at some of the bugzilla
  reports we had open for a while.

  I'm a bit disappointed that I couldn't get much reviews for a few of
  my own patches, but the big ones got some and it's all been soaking in
  linux-next for quite a while so I think it should be OK.

  Summary:

   - Finish removing the custom 9p request cache mechanism

   - Embed part of the fcall in the request to have better slab
     performance (msize usually is power of two aligned)

   - syzkaller fixes:
      * add a refcount to 9p requests to avoid use after free
      * a few double free issues

   - A few coverity fixes

   - Some old patches that were in the bugzilla:
      * do not trust pdu content for size header
      * mount option for lock retry interval"

* tag '9p-for-4.20' of git://github.com/martinetd/linux: (21 commits)
  9p/trans_fd: put worker reqs on destroy
  9p/trans_fd: abort p9_read_work if req status changed
  9p: potential NULL dereference
  9p locks: fix glock.client_id leak in do_lock
  9p: p9dirent_read: check network-provided name length
  9p/rdma: remove useless check in cm_event_handler
  9p: acl: fix uninitialized iattr access
  9p locks: add mount option for lock retry interval
  9p: do not trust pdu content for stat item size
  9p: Rename req to rreq in trans_fd
  9p: fix spelling mistake in fall-through annotation
  9p/rdma: do not disconnect on down_interruptible EAGAIN
  9p: Add refcount to p9_req_t
  9p: rename p9_free_req() function
  9p: add a per-client fcall kmem_cache
  9p: embed fcall in req to round down buffer allocs
  9p: Remove p9_idpool
  9p: Use a slab for allocating requests
  9p: clear dangling pointers in p9stat_free
  v9fs_dir_readdir: fix double-free on p9stat_read error
  ...

Pull m68k nommu fix from Greg Ungerer:
 "Only a single change to fix an out of bounds array access when parsing
  boot command line"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: fix command-line parsing when passed from u-boot