New gspca subdriver adding support for SN9C2028 dual-mode cameras.
Signed-off-by: NTheodore Kilgore <kilgota@banach.math.auburn.edu>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If you read the mail to Oliver Neukum on the linux-usb list, then you know
that I found a cure for the mysterious problem that the MR97310a CIF "type
1" cameras have been freezing up and refusing to stream if hooked up to a
machine with a UHCI controller.

Namely, the cure is that if the camera is an mr97310a CIF type 1 camera, you
have to send it 0xa0, 0x00. Somehow, this is a timing reset command, or
such. It un-blocks whatever was previously stopping the CIF type 1 cameras
from working on the UHCI-based machines.
Signed-off-by: NTheodore Kilgore <kilgota@auburn.edu>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The two sensors ov772x and ov965x have too much differences.
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Stanse found a potential null dereference in cx18_dvb_start_feed
and cx18_dvb_stop_feed. There is a check for stream being NULL,
but it is dereferenced earlier. Move the dereference after the
check.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Reviewed-by: NAndy Walls <awalls@radix.net>
Acked-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Stanse found a memory leak in tuner_probe. It is not freed/assigned
on all paths. Fix that.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The return of saa7164_i2caddr_to_reglen() was not tested.

Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

this patch fixes a memory leak which occurs when an em28xx card with DVB
extension is unplugged or its DVB extension driver is unloaded. In
dvb_fini(), dev->dvb must be freed before being set to NULL, as is done
in dvb_init() in case of error.
Note that this bug is also present in the latest stable kernel release.
Signed-off-by: NFrancesco Lavra <francescolavra@interfree.it>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use the %pM kernel extension to display the MAC address.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use the %pM kernel extension to display the MAC address.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Test the just-allocated value for NULL rather than some other value.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier f;
@@

f(...) { <+... return NULL; ...+> }

@@
expression *x;
expression y;
identifier r.f;
statement S;
@@

x = f(...);
(
if ((x) == NULL) S
|
if (
-   y
+   x
       == NULL)
 S
)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Cc: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add lost configuration for our TV card.
Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

video_nr is unsigned so the test did not work.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Although these sizes may be the same it is better to calculate the size of
the source, than the destiny.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make the VBI support work for PAL standards in addition to NTSC.

This work was sponsored by EyeMagnet Limited.

Thanks go out to Andy Walls for providing a CD containing test PAL/VBI captures
and to Steven Toth for providing a PVR-350 to do signal generation with.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The bug was introduced when adding the sensor adcm1700.
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When loading the register 0x49 of the page 3, the usb_control_msg() sometimes
fails with error -71 or -62.
This change skips loading the register 0x48.
Tested-by: NMárton Németh <nm127@freemail.hu>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Some webcams have many interfaces with the same interface class, so the
previous interface check did not work.
The new code checks if the interface number is zero or the only one.
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The new names tell the image resolution: 'Scale' is the smaller image.
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

- update copyright and module author
- change __u8/16 to u8/16
- set unsigned the sd sensor
- initialize the controls by macros
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Thanks to: Devin Heitmueller <dheitmueller@kernellabs.com> for double
checking it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This change fixes up saa7127_s_std() generate SECAM out, if the user has
requested a 50 Hz video standard set that only contains a request for SECAM
standards and not PAL.  Only the SAA712[89] chips can generate SECAM, the
SAA712[67] chips cannot.

I was unclear on the burst start and end values - I couldn't figure out
the units - so I left them the same as for the PAL systems.

A the video decoders on both a PVR-350 (SAA7115) and an HVR-1600 (CX23418)
identify the SECAM signal generated by a SAA7129 with this patch as SECAM.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix the "xceive_pin" setting from "15" to "1" for the PVR2100 -- the same as
the PVR3100H.  This properly resets the XC2028 tuner on the PVR2100.

Sergey's original email report:

Hi.
Seems cx18 module has incorrect .xceive_pin value for card,
as i see lots of i2c errors in dmesg from xc2028.
i'm using 2.6.32.2, my hardware is:

00:09.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23418
Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder
[14f1:5b7a]
        Subsystem: LeadTek Research Inc. Device [107d:6f27]
        Flags: bus master, medium devsel, latency 64, IRQ 17
        Memory at f0000000 (32-bit, non-prefetchable) [size=64M]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2
        Kernel driver in use: cx18
        Kernel modules: cx18

Following fixes this problem for me, the rest seems working:
Reported-by: NSergey Bolshakov <sbolshakov@altlinux.ru>
Tested-by: NSergey Bolshakov <sbolshakov@altlinux.ru>
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The CX18_CPU_SET_INDEXTABLE command was being called with the wrong number
of arguments causing the index table frame type selection mask to be set wrong.
Now the IDX stream properly sends entries for I, P, and B frames.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

VIDIOC_G_ENC_INDEX support see the light of day.
Some notes:
1. With default capture parameters, the CX23418 seems to transfer 192 index
entries (4.5 kB worth) at 10 second intervals.

2. Index streams don't seem to be supported for MPEG 2 TS streams

3. The index entries seem to claim every frame is a B-Frame.  Possible
firmware bug.

4. The cx18 driver does not try to capture an index stream when inserting
sliced VBI into the MPEg stream as the offsets would need fixup.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

According to the v4l2 spec, very old MPEG index entries needs to be discarded
in favor of newer index entries.  This change ensures the firmware always has
buffers for index entries at the expense of the oldest unread buffers.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This change starts the IDX stream along with the MPG stream as an internal
use (only) stream much like the VBI stream can be started as an internal use
stream for inserting sliced VBI packets.

The IDX stream is not started automatically with an MPEG strem if the IDX
stream is disabled (no buffers allocated) or if sliced VBI insertion is being
performed by the cx18 driver.  The cx18 driver doing sliced VBI insertion
makes the offsets in the IDX stream inaccurate for the final MPEG stream
presented to user space.  Since fixing the IDX offsets ourselves is not easy
and we cannot easily do what ivtv does to fix the offsets, we'll make sliced
VBI insertion and MPEG Index capture mutually exclusive for now.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This change allows the IDX stream to be started and stopped as any other
stream even though it has no associated device node.  This is needed for
cx18 driver internal use.

Also always tell the CX23418 to generate index entries when an analog capture
starts and the IDX stream has had buffers allocated (i.e. is enabled).
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix a long standing memory leak of stream buffers for streams that did not
have a struct video_device allocated: namely the TS and IDX streams.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Update the module options related to INDEX stream buffer allocation.  A single
CX2341[5678] index entry is only 24 bytes.  Large buffers for the IDX stream
will prevent the CX23418 from transferring index data over at all.  Buffers
of around 1.5 kB or 64 index entries seem to be just fine.  We'll default to
63 buffers/MDLs as that is the firmware limit per stream and IDX stream buffers
are not high rate.  There is no reason on earth to allocate the previous 1 MB
default of buffer space for the IDX stream.

This is in anticipation of implementing the G_ENC_INDEX ioctl() in the cx18
driver.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>