Introduce bpf_link_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_link_get_fd_by_id(), and call bpf_link_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.

Currently, the kernel does not support non-zero open_flags for
bpf_link_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-6-roberto.sassu@huaweicloud.com

Introduce bpf_btf_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_btf_get_fd_by_id(), and call bpf_btf_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.

Currently, the kernel does not support non-zero open_flags for
bpf_btf_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-5-roberto.sassu@huaweicloud.com

Introduce bpf_prog_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_prog_get_fd_by_id(), and call bpf_prog_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.

Currently, the kernel does not support non-zero open_flags for
bpf_prog_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-4-roberto.sassu@huaweicloud.com

Define a new data structure called bpf_get_fd_by_id_opts, with the member
open_flags, to be used by callers of the _opts variants of
bpf_*_get_fd_by_id() to specify the permissions needed for the file
descriptor to be obtained.

Also, introduce bpf_map_get_fd_by_id_opts(), to let the caller pass a
bpf_get_fd_by_id_opts structure.

Finally, keep the existing bpf_map_get_fd_by_id(), and call
bpf_map_get_fd_by_id_opts() with NULL as opts argument, to request
read-write permissions (current behavior).
Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-3-roberto.sassu@huaweicloud.com

Remove three missed deprecated APIs that were aliased to new APIs:
bpf_object__unload, bpf_prog_attach_xattr and btf__load.

Also move legacy API libbpf_find_kernel_btf (aliased to
btf__load_vmlinux_btf) into libbpf_legacy.h.
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NHao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-4-andrii@kernel.org

Make sure that entire libbpf code base is initializing bpf_attr and
perf_event_attr with memset(0). Also for bpf_attr make sure we
clear and pass to kernel only relevant parts of bpf_attr. bpf_attr is
a huge union of independent sub-command attributes, so there is no need
to clear and pass entire union bpf_attr, which over time grows quite
a lot and for most commands this growth is completely irrelevant.

Few cases where we were relying on compiler initialization of BPF UAPI
structs (like bpf_prog_info, bpf_map_info, etc) with `= {};` were
switched to memset(0) pattern for future-proofing.
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NHao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-3-andrii@kernel.org

Similar with commit 10b62d6a ("libbpf: Add names for auxiliary maps"),
let's make bpf_prog_load() also ignore name if kernel doesn't support
program name.

To achieve this, we need to call sys_bpf_prog_load() directly in
probe_kern_prog_name() to avoid circular dependency. sys_bpf_prog_load()
also need to be exported in the libbpf_internal.h file.
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Acked-by: NQuentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220813000936.6464-1-liuhangbin@gmail.com

The bpftool self-created maps can appear in final map show output due to
deferred removal in kernel. These maps don't have a name, which would make
users confused about where it comes from.

With a libbpf_ prefix name, users could know who created these maps.
It also could make some tests (like test_offload.py, which skip base maps
without names as a workaround) filter them out.

Kernel adds bpf prog/map name support in the same merge
commit fadad670 ("Merge branch 'bpf-extend-info'"). So we can also use
kernel_supports(NULL, FEAT_PROG_NAME) to check if kernel supports map name.

As discussed [1], Let's make bpf_map_create accept non-null
name string, and silently ignore the name if kernel doesn't support.

  [1] https://lore.kernel.org/bpf/CAEf4BzYL1TQwo1231s83pjTdFPk9XWWhfZC5=KzkU-VO0k=0Ug@mail.gmail.com/Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220811034020.529685-1-liuhangbin@gmail.com

Add an extensible variant of bpf_obj_get() capable of setting the
`file_flags` parameter.

This parameter is needed to enable unprivileged access to BPF maps.
Without a method like this, users must manually make the syscall.
Signed-off-by: NJoe Burton <jevburton@google.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220729202727.3311806-1-jevburton.kernel@gmail.com

Implement bpf_prog_query_opts as a more expendable version of
bpf_prog_query. Expose new prog_attach_flags and attach_btf_func_id as
well:

* prog_attach_flags is a per-program attach_type; relevant only for
  lsm cgroup program which might have different attach_flags
  per attach_btf_id
* attach_btf_func_id is a new field expose for prog_query which
  specifies real btf function id for lsm cgroup attachments
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NStanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220628174314.1216643-10-sdf@google.comSigned-off-by: NAlexei Starovoitov <ast@kernel.org>

Remove support for legacy features and behaviors that previously had to
be disabled by calling libbpf_set_strict_mode():
  - legacy BPF map definitions are not supported now;
  - RLIMIT_MEMLOCK auto-setting, if necessary, is always on (but see
    libbpf_set_memlock_rlim());
  - program name is used for program pinning (instead of section name);
  - cleaned up error returning logic;
  - entry BPF programs should have SEC() always.
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-15-andrii@kernel.orgSigned-off-by: NAlexei Starovoitov <ast@kernel.org>

Drop low-level APIs as well as high-level (and very confusingly named)
BPF object loading bpf_prog_load_xattr() and bpf_prog_load_deprecated()
APIs.
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-3-andrii@kernel.orgSigned-off-by: NAlexei Starovoitov <ast@kernel.org>

To test API removal, get rid of bpf_create_map*() APIs. Perf defines
__weak implementation of bpf_map_create() that redirects to old
bpf_create_map() and that seems to compile and run fine.

Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220518185915.3529475-4-andrii@kernel.orgSigned-off-by: NAlexei Starovoitov <ast@kernel.org>

Add high-level API wrappers for most common and typical BPF map
operations that works directly on instances of struct bpf_map * (so
you don't have to call bpf_map__fd()) and validate key/value size
expectations.

These helpers require users to specify key (and value, where
appropriate) sizes when performing lookup/update/delete/etc. This forces
user to actually think and validate (for themselves) those. This is
a good thing as user is expected by kernel to implicitly provide correct
key/value buffer sizes and kernel will just read/write necessary amount
of data. If it so happens that user doesn't set up buffers correctly
(which bit people for per-CPU maps especially) kernel either randomly
overwrites stack data or return -EFAULT, depending on user's luck and
circumstances. These high-level APIs are meant to prevent such
unpleasant and hard to debug bugs.

This patch also adds bpf_map_delete_elem_flags() low-level API and
requires passing flags to bpf_map__delete_elem() API for consistency
across all similar APIs, even though currently kernel doesn't expect
any extra flags for BPF_MAP_DELETE_ELEM operation.

List of map operations that get these high-level APIs:

  - bpf_map_lookup_elem;
  - bpf_map_update_elem;
  - bpf_map_delete_elem;
  - bpf_map_lookup_and_delete_elem;
  - bpf_map_get_next_key.
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220512220713.2617964-1-andrii@kernel.org

Add a cookie field to the attributes of bpf_link_create().
Add bpf_program__attach_trace_opts() to attach a cookie to a link.
Signed-off-by: NKui-Feng Lee <kuifeng@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Acked-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220510205923.3206889-5-kuifeng@fb.com

Teach bpf_link_create() to fallback to bpf_raw_tracepoint_open() on
older kernels for programs that are attachable through
BPF_RAW_TRACEPOINT_OPEN. This makes bpf_link_create() more unified and
convenient interface for creating bpf_link-based attachments.

With this approach end users can just use bpf_link_create() for
tp_btf/fentry/fexit/fmod_ret/lsm program attachments without needing to
care about kernel support, as libbpf will handle this transparently. On
the other hand, as newer features (like BPF cookie) are added to
LINK_CREATE interface, they will be readily usable though the same
bpf_link_create() API without any major refactoring from user's
standpoint.

bpf_program__attach_btf_id() is now using bpf_link_create() internally
as well and will take advantaged of this unified interface when BPF
cookie is added for fentry/fexit.

Doing proactive feature detection of LINK_CREATE support for
fentry/tp_btf/etc is quite involved. It requires parsing vmlinux BTF,
determining some stable and guaranteed to be in all kernels versions
target BTF type (either raw tracepoint or fentry target function),
actually attaching this program and thus potentially affecting the
performance of the host kernel briefly, etc. So instead we are taking
much simpler "lazy" approach of falling back to
bpf_raw_tracepoint_open() call only if initial LINK_CREATE command
fails. For modern kernels this will mean zero added overhead, while
older kernels will incur minimal overhead with a single fast-failing
LINK_CREATE call.
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NKui-Feng Lee <kuifeng@fb.com>
Link: https://lore.kernel.org/bpf/20220421033945.3602803-3-andrii@kernel.org

Adding new kprobe_multi struct to bpf_link_create_opts object
to pass multiple kprobe data to link_create attr uapi.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-9-jolsa@kernel.org

Add support for setting the new batch_size parameter to BPF_PROG_TEST_RUN
to libbpf; just add it as an option and pass it through to the kernel.
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-4-toke@redhat.com

Fix the following coccicheck warning:
tools/lib/bpf/bpf.c:114:31-32: WARNING: Use ARRAY_SIZE
tools/lib/bpf/xsk.c:484:34-35: WARNING: Use ARRAY_SIZE
tools/lib/bpf/xsk.c:485:35-36: WARNING: Use ARRAY_SIZE

It has been tested with gcc (Debian 8.3.0-6) 8.3.0 on x86_64.
Signed-off-by: NGuo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220306023426.19324-1-guozhengkui@vivo.com

All xattr APIs are being dropped, let's converge to the convention used in
high-level APIs and rename bpf_prog_attach_xattr to bpf_prog_attach_opts.
Signed-off-by: NChristy Lee <christylee@fb.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220107184604.3668544-2-christylee@fb.com

This adds documention for:

- bpf_map_delete_batch()
- bpf_map_lookup_batch()
- bpf_map_lookup_and_delete_batch()
- bpf_map_update_batch()

This also updates the public API for the `keys` parameter
of `bpf_map_delete_batch()`, and both the
`keys` and `values` parameters of `bpf_map_update_batch()`
to be constants.
Signed-off-by: NGrant Seltzer <grantseltzer@gmail.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Acked-by: NYonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220106201304.112675-1-grantseltzer@gmail.com

The need to increase RLIMIT_MEMLOCK to do anything useful with BPF is
one of the first extremely frustrating gotchas that all new BPF users go
through and in some cases have to learn it a very hard way.

Luckily, starting with upstream Linux kernel version 5.11, BPF subsystem
dropped the dependency on memlock and uses memcg-based memory accounting
instead. Unfortunately, detecting memcg-based BPF memory accounting is
far from trivial (as can be evidenced by this patch), so in practice
most BPF applications still do unconditional RLIMIT_MEMLOCK increase.

As we move towards libbpf 1.0, it would be good to allow users to forget
about RLIMIT_MEMLOCK vs memcg and let libbpf do the sensible adjustment
automatically. This patch paves the way forward in this matter. Libbpf
will do feature detection of memcg-based accounting, and if detected,
will do nothing. But if the kernel is too old, just like BCC, libbpf
will automatically increase RLIMIT_MEMLOCK on behalf of user
application ([0]).

As this is technically a breaking change, during the transition period
applications have to opt into libbpf 1.0 mode by setting
LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK bit when calling
libbpf_set_strict_mode().

Libbpf allows to control the exact amount of set RLIMIT_MEMLOCK limit
with libbpf_set_memlock_rlim_max() API. Passing 0 will make libbpf do
nothing with RLIMIT_MEMLOCK. libbpf_set_memlock_rlim_max() has to be
called before the first bpf_prog_load(), bpf_btf_load(), or
bpf_object__load() call, otherwise it has no effect and will return
-EBUSY.

  [0] Closes: https://github.com/libbpf/libbpf/issues/369Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211214195904.1785155-2-andrii@kernel.org

strncpy() has a notoriously error-prone semantics which makes GCC
complain about it a lot (and quite often completely completely falsely
at that). Instead of pleasing GCC all the time (-Wno-stringop-truncation
is unfortunately only supported by GCC, so it's a bit too messy to just
enable it in Makefile), add libbpf-internal libbpf_strlcpy() helper
which follows what FreeBSD's strlcpy() does and what most people would
expect from strncpy(): copies up to N-1 first bytes from source string
into destination string and ensures zero-termination afterwards.

Replace all the relevant uses of strncpy/strncat/memcpy in libbpf with
libbpf_strlcpy().

This also fixes the issue reported by Emmanuel Deloget in xsk.c where
memcpy() could access source string beyond its end.

Fixes: 2f6324a3 (libbpf: Support shared umems between queues and devices)
Reported-by: NEmmanuel Deloget <emmanuel.deloget@eho.link>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211211004043.2374068-1-andrii@kernel.org

Similar to previous bpf_prog_load() and bpf_map_create() APIs, add
bpf_btf_load() API which is taking optional OPTS struct. Schedule
bpf_load_btf() for deprecation in v0.8 ([0]).

This makes naming consistent with BPF_BTF_LOAD command, sets up an API
for extensibility in the future, moves options parameters (log-related
fields) into optional options, and also allows to pass log_level
directly.

It also removes log buffer auto-allocation logic from low-level API
(consistent with bpf_prog_load() behavior), but preserves a special
treatment of log_level == 0 with non-NULL log_buf, which matches
low-level bpf_prog_load() and high-level libbpf APIs for BTF and program
loading behaviors.

  [0] Closes: https://github.com/libbpf/libbpf/issues/419Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-3-andrii@kernel.org

To unify libbpf APIs behavior w.r.t. log_buf and log_level, fix
bpf_prog_load() to follow the same logic as bpf_btf_load() and
high-level bpf_object__load() API will follow in the subsequent patches:
  - if log_level is 0 and non-NULL log_buf is provided by a user, attempt
    load operation initially with no log_buf and log_level set;
  - if successful, we are done, return new FD;
  - on error, retry the load operation with log_level bumped to 1 and
    log_buf set; this way verbose logging will be requested only when we
    are sure that there is a failure, but will be fast in the
    common/expected success case.

Of course, user can still specify log_level > 0 from the very beginning
to force log collection.
Suggested-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-2-andrii@kernel.org

Add the __NR_bpf definitions to fix the following build errors for mips:

  $ cd tools/bpf/bpftool
  $ make
  [...]
  bpf.c:54:4: error: #error __NR_bpf not defined. libbpf does not support your arch.
   #  error __NR_bpf not defined. libbpf does not support your arch.
      ^~~~~
  bpf.c: In function ‘sys_bpf’:
  bpf.c:66:17: error: ‘__NR_bpf’ undeclared (first use in this function); did you mean ‘__NR_brk’?
    return syscall(__NR_bpf, cmd, attr, size);
                   ^~~~~~~~
                   __NR_brk
  [...]
  In file included from gen_loader.c:15:0:
  skel_internal.h: In function ‘skel_sys_bpf’:
  skel_internal.h:53:17: error: ‘__NR_bpf’ undeclared (first use in this function); did you mean ‘__NR_brk’?
    return syscall(__NR_bpf, cmd, attr, size);
                   ^~~~~~~~
                   __NR_brk

We can see the following generated definitions:

  $ grep -r "#define __NR_bpf" arch/mips
  arch/mips/include/generated/uapi/asm/unistd_o32.h:#define __NR_bpf (__NR_Linux + 355)
  arch/mips/include/generated/uapi/asm/unistd_n64.h:#define __NR_bpf (__NR_Linux + 315)
  arch/mips/include/generated/uapi/asm/unistd_n32.h:#define __NR_bpf (__NR_Linux + 319)

The __NR_Linux is defined in arch/mips/include/uapi/asm/unistd.h:

  $ grep -r "#define __NR_Linux" arch/mips
  arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux	4000
  arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux	5000
  arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux	6000

That is to say, __NR_bpf is:

  4000 + 355 = 4355 for mips o32,
  6000 + 319 = 6319 for mips n32,
  5000 + 315 = 5315 for mips n64.

So use the GCC pre-defined macro _ABIO32, _ABIN32 and _ABI64 [1] to define
the corresponding __NR_bpf.

This patch is similar with commit bad1926d ("bpf, s390: fix build for
libbpf and selftest suite").

  [1] https://gcc.gnu.org/git/?p=gcc.git;a=blob;f=gcc/config/mips/mips.h#l549Signed-off-by: NTiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1637804167-8323-1-git-send-email-yangtiezhu@loongson.cn

Mark the entire zoo of low-level map creation APIs for deprecation in
libbpf 0.7 ([0]) and introduce a new bpf_map_create() API that is
OPTS-based (and thus future-proof) and matches the BPF_MAP_CREATE
command name.

While at it, ensure that gen_loader sends map_extra field. Also remove
now unneeded btf_key_type_id/btf_value_type_id logic that libbpf is
doing anyways.

  [0] Closes: https://github.com/libbpf/libbpf/issues/282Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124193233.3115996-2-andrii@kernel.org

Remove all the internal uses of bpf_load_program_xattr(), which is
slated for deprecation in v0.7.
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-5-andrii@kernel.org

Add a new unified OPTS-based low-level API for program loading,
bpf_prog_load() ([0]).  bpf_prog_load() accepts few "mandatory"
parameters as input arguments (program type, name, license,
instructions) and all the other optional (as in not required to specify
for all types of BPF programs) fields into struct bpf_prog_load_opts.

This makes all the other non-extensible APIs variant for BPF_PROG_LOAD
obsolete and they are slated for deprecation in libbpf v0.7:
  - bpf_load_program();
  - bpf_load_program_xattr();
  - bpf_verify_program().

Implementation-wise, internal helper libbpf__bpf_prog_load is refactored
to become a public bpf_prog_load() API. struct bpf_prog_load_params used
internally is replaced by public struct bpf_prog_load_opts.

Unfortunately, while conceptually all this is pretty straightforward,
the biggest complication comes from the already existing bpf_prog_load()
*high-level* API, which has nothing to do with BPF_PROG_LOAD command.

We try really hard to have a new API named bpf_prog_load(), though,
because it maps naturally to BPF_PROG_LOAD command.

For that, we rename old bpf_prog_load() into bpf_prog_load_deprecated()
and mark it as COMPAT_VERSION() for shared library users compiled
against old version of libbpf. Statically linked users and shared lib
users compiled against new version of libbpf headers will get "rerouted"
to bpf_prog_deprecated() through a macro helper that decides whether to
use new or old bpf_prog_load() based on number of input arguments (see
___libbpf_overload in libbpf_common.h).

To test that existing
bpf_prog_load()-using code compiles and works as expected, I've compiled
and ran selftests as is. I had to remove (locally) selftest/bpf/Makefile
-Dbpf_prog_load=bpf_prog_test_load hack because it was conflicting with
the macro-based overload approach. I don't expect anyone else to do
something like this in practice, though. This is testing-specific way to
replace bpf_prog_load() calls with special testing variant of it, which
adds extra prog_flags value. After testing I kept this selftests hack,
but ensured that we use a new bpf_prog_load_deprecated name for this.

This patch also marks bpf_prog_load() and bpf_prog_load_xattr() as deprecated.
bpf_object interface has to be used for working with struct bpf_program.
Libbpf doesn't support loading just a bpf_program.

The silver lining is that when we get to libbpf 1.0 all these
complication will be gone and we'll have one clean bpf_prog_load()
low-level API with no backwards compatibility hackery surrounding it.

  [0] Closes: https://github.com/libbpf/libbpf/issues/284Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-4-andrii@kernel.org

Allow to control number of BPF_PROG_LOAD attempts from outside the
sys_bpf_prog_load() helper.
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-3-andrii@kernel.org

Fix bpf_map_lookup_and_delete_elem_flags() to pass the return code through
libbpf_err_errno() as we do similarly in bpf_map_lookup_and_delete_elem().

Fixes: f12b6543 ("libbpf: Streamline error reporting for low-level APIs")
Signed-off-by: NMehrdad Arshad Rad <arshad.rad@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NYonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211104171354.11072-1-arshad.rad@gmail.com

Add a simple wrapper for passing an fd and getting a new one >= 3 if it
is one of 0, 1, or 2. There are two primary reasons to make this change:
First, libbpf relies on the assumption a certain BPF fd is never 0 (e.g.
most recently noticed in [0]). Second, Alexei pointed out in [1] that
some environments reset stdin, stdout, and stderr if they notice an
invalid fd at these numbers. To protect against both these cases, switch
all internal BPF syscall wrappers in libbpf to always return an fd >= 3.
We only need to modify the syscall wrappers and not other code that
assumes a valid fd by doing >= 0, to avoid pointless churn, and because
it is still a valid assumption. The cost paid is two additional syscalls
if fd is in range [0, 2].

  [0]: e31eec77 ("bpf: selftests: Fix fd cleanup in get_branch_snapshot")
  [1]: https://lore.kernel.org/bpf/CAADnVQKVKY8o_3aU8Gzke443+uHa-eGoM0h7W4srChMXU1S4Bg@mail.gmail.comSigned-off-by: NKumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NSong Liu <songliubraving@fb.com>
Acked-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-5-memxor@gmail.com

This patch adds the libbpf infrastructure for supporting a
per-map-type "map_extra" field, whose definition will be
idiosyncratic depending on map type.

For example, for the bloom filter map, the lower 4 bits of
map_extra is used to denote the number of hash functions.

Please note that until libbpf 1.0 is here, the
"bpf_create_map_params" struct is used as a temporary
means for propagating the map_extra field to the kernel.
Signed-off-by: NJoanne Koong <joannekoong@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211027234504.30744-3-joannekoong@fb.com

This patch adds libbpf support for kernel module function call support.
The fd_array parameter is used during BPF program load to pass module
BTFs referenced by the program. insn->off is set to index into this
array, but starts from 1, because insn->off as 0 is reserved for
btf_vmlinux.

We try to use existing insn->off for a module, since the kernel limits
the maximum distinct module BTFs for kfuncs to 256, and also because
index must never exceed the maximum allowed value that can fit in
insn->off (INT16_MAX). In the future, if kernel interprets signed offset
as unsigned for kfunc calls, this limit can be increased to UINT16_MAX.

Also introduce a btf__find_by_name_kind_own helper to start searching
from module BTF's start id when we know that the BTF ID is not present
in vmlinux BTF (in find_ksym_btf_id).
Signed-off-by: NKumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-7-memxor@gmail.com

Add ability to specify bpf_cookie value when creating BPF perf link with
bpf_link_create() low-level API.

Given BPF_LINK_CREATE command is growing and keeps getting new fields that are
specific to the type of BPF_LINK, extend libbpf side of bpf_link_create() API
and corresponding OPTS struct to accomodate such changes. Add extra checks to
prevent using incompatible/unexpected combinations of fields.
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-11-andrii@kernel.org

Ensure that low-level APIs behave uniformly across the libbpf as follows:
  - in case of an error, errno is always set to the correct error code;
  - when libbpf 1.0 mode is enabled with LIBBPF_STRICT_DIRECT_ERRS option to
    libbpf_set_strict_mode(), return -Exxx error value directly, instead of -1;
  - by default, until libbpf 1.0 is released, keep returning -1 directly.

More context, justification, and discussion can be found in "Libbpf: the road
to v1.0" document ([0]).

  [0] https://docs.google.com/document/d/1UyjTZuPFWiPFyKk1tV5an11_iaRuec6U-ZESZ54nNTYSigned-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NToke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-4-andrii@kernel.org

Add bpf_map_lookup_and_delete_elem_flags() libbpf API in order to use
the BPF_F_LOCK flag with the map_lookup_and_delete_elem() function.
Signed-off-by: NDenis Salopek <denis.salopek@sartura.hr>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Acked-by: NYonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/15b05dafe46c7e0750d110f233977372029d1f62.1620763117.git.denis.salopek@sartura.hr

Teach libbpf to search for BTF types in kernel modules for tracing BPF
programs. This allows attachment of raw_tp/fentry/fexit/fmod_ret/etc BPF
program types to tracepoints and functions in kernel modules.
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-13-andrii@kernel.org

Refactor low-level API for BPF program loading to not rely on public API
types. This allows painless extension without constant efforts to cleverly not
break backwards compatibility.
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-12-andrii@kernel.org

I've seen a situation, where a process that's under pprof constantly
generates SIGPROF which prevents program loading indefinitely.
The right thing to do probably is to disable signals in the upper
layers while loading, but it still would be nice to get some error from
libbpf instead of an endless loop.

Let's add some small retry limit to the program loading:
try loading the program 5 (arbitrary) times and give up.

v2:
* 10 -> 5 retires (Andrii Nakryiko)
Signed-off-by: NStanislav Fomichev <sdf@google.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Acked-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201202231332.3923644-1-sdf@google.com