Added power-map and analog-loopback information to proc output for
IDT/STAC codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a hook for proc outputs of codec-specific stuff.

Moved realtek-specific coeff output into patch_realtek.c as well.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Moved power_save field initialization inside a proper ifdef
to fix a build error without CONFIG_SND_HDA_POWER_SAVE.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed a wrong boundary check of num_adc_nids in set_capture_mixer()
in patch_realtek.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The reconfiguration of PCM affected all PCM streams on the bus, but
this this should be done rather only for the target codec.

This patch does the following:
- introduce bitmap indicating the PCM device usages on a hda_bus
- refactor the PCM build functions
- fix __devinit prefix in some fucntions
- add a proper ifdef around HDA-reconfig-specific functions
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move power_save option into hda_intel.c, and make a field in hda_bus,
instead of keeping module parameters in separate files.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Minor clean ups: move snd_hda_codecs_inuse() into hda_intel.c and
make static.  Also, make snd_hda_query_supported_pcm() static
as it's used only in hda_codec.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There is no argument named @state in snd_hda_resume,
remove its' comment.
Signed-off-by: NQinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The fix in 82894b6f resulted in zero
due to wrong mask and bit shifts.  Now fixed really.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Conflicts:
	sound/pci/hda/patch_sigmatel.c

Check the model type instead of PCI SSID for detection of the mic types
on Dell laptops with IDT 92HD73xx codecs.  In this way, a new laptop
can be tested via model module option.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed the quirk string for Dell studio 1535 (the product name wasn't
published at the time the patch was made).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

STAC/IDT driver creates "Headphone as Line-Out" switch even if there
is no line-out pins on the machine.  For devices only with headpohnes
and speaker-outs, this switch shouldn't be created.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added preset model=targa-dig for MSI 7260 mobo.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since we need to handle many unsolicited events assigned to different
widgets, allocate the event dynamically using the existing events
array, and use the tag appropriately instead of combination of fixed
number and widget nid.  (Note that widget nid can be over 4 bits!)

Also, replaced the call of unsol_event handler with a dedicated
function to be more readable.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Conflicts:
	sound/pci/hda/patch_sigmatel.c

The AFG pin power-mapping isn't properly set for the fixed I/O pins
on IDT 92HD* codecs.  This resulted in the low power mode after the
boot until any jack detection is executed, thus no output from the
speaker.

This patch fixes the power mapping for the fixed pins, and also fixes
the GPIO bits and digital I/O pin settings properly in stac92xx_ini().

Reference: Novell bnc#446025
	https://bugzilla.novell.com/show_bug.cgi?id=446025Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Show only the relevant bits in the PCM rate bits as in the earlier version.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

SPDIF status bits controls are written via snd_hda_codec_write()
without caching.  This causes a regression at resume that the bits
are lost.

Simply replacing it with the cached version fixes the problem.

Reference:
	http://lkml.org/lkml/2008/11/24/324Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Medion MD96630 has ALC268 codec on slot#2 although it's not used
for any purpose.  This codec conflicts with the primiary codec ALC888
on slot#0, and gives mixer errors.

This patch adds a corresponding entry to probe_mask blacklist.

Reference: Novell bnc#412528
	https://bugzilla.novell.com/show_bug.cgi?id=412528Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch fixes the bug 0004240: ALC888 - Intel HDA - Headphone Controlling.
It is made against the 2008-11-23 snapshot.

Added Realtek ALC888 model entry for the Fujitsu-Siemens Amilo Xa3530
laptop. It has 4 jacks: HP out, Mic-in, Line-in and Line-out/Side/SPDIF
(this one is on the laptop side, the other ones are on the rear).

Model detection works.
Headphone jack sense works now.
Front mic works now, was same as Acer Aspire 4930G.
Added channel mode from 2 to 8 channels.

In 2ch and 4ch modes, the front is also sent to the Line-out/side jack
for convenience instead of just muting the Line-out/side jack like other
models do.

When using the Mic-in jack as CLFE, the sound is very low (bug?). To
work it around, in 6ch mode the CLFE channel is duplicated to the
Line-out/side jack because this one has a better amp.

Cc: manu@frogged.de
Signed-off-by: NVincent Petry <PVince81@yahoo.fr>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

STAC/IDT driver creates "Headphone as Line-Out" switch even if there
is no line-out pins on the machine.  For devices only with headpohnes
and speaker-outs, this switch shouldn't be created.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix "defined but not used" build warning by moving eld_versoin_names[]
and cea_edid_version_names[] into hdmi_print_eld_info().
Signed-off-by: NWu Fengguang <wfg@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

DisplayPort is a digital display interface standard put forth by
the Video Electronics Standards Association (VESA). It defines a
new license-free, royalty-free, digital audio/video interconnect,
intended to be used primarily between a computer and its display monitor,
or a computer and a home-theater system.

				- From Wikipedia, the free encyclopedia
Signed-off-by: NWu Fengguang <wfg@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Describe what ELD proc interface provides and how to fix incorrect values.
Signed-off-by: NWu Fengguang <wfg@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- rename ELD proc write routine to hdmi_write_eld_info()
- support modifying WMAPro's profile

Write to some ELD fields (monitor_name, manufacture_id, product_id,
eld_version, edid_version) are deliberately not supported, since that
won't correct wrong behaviors and only leads to confusions.
Signed-off-by: NWu Fengguang <wfg@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- make some messages more user friendly
- add message prefix "HDMI:" to indicate the problem's domain
  (also easier to do `dmesg | grep HDMI` ;-)
Signed-off-by: NWu Fengguang <wfg@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Print some CA selecting info, which could be valuable for debugging when
something goes wrong.
Signed-off-by: NWu Fengguang <wfg@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some minor code cleanups.
Signed-off-by: NWu Fengguang <wfg@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_print_pcm_rates() and snd_print_pcm_bits() are used by both
hda_proc.c and hda_eld.c, thus they have to be defined in the common
place.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed the quirk string for Dell studio 1535 (the product name wasn't
published at the time the patch was made).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the following sparse warning:

sound/pci/hda/patch_nvhdmi.c:161:25: warning: symbol
'snd_hda_preset_nvhdmi' was not declared. Should it be static?
Signed-off-by: NHannes Eder <hannes@hanneseder.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Make the codec re-configuration feature selectable via Kconfig,
CONFIG_SND_HDA_RECONFIG.
Also mark it as experimental (as it really is).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Release ELD proc file when reconfigured so that no leak occurs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The jack instances created in patch_sigmatel.c may be double-freed.
The device management code checks the invalid element, and thus there
is no real breakage, but it spews annoying warning messages.
But, we can't simply remove the release calls of these jack instances
because they have to be freed when the codec is re-configured.

Now, a new flag, bus->shutdown is introduced to indicate that the bus
is really being unloaded, i.e. the objects managed by the device
manager will be automatically deleted.  We release these objects only
when this flag isn't set.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the matching model=dell-m6 for Dell Studio 15 laptop.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>