- 24 4月, 2014 3 次提交
-
-
由 Alexey Charkov 提交于
This should make the driver usable with VIA/WonderMedia ARM-based Systems-on-Chip integrated Rhine III adapters. Note that these are always in MMIO mode, and don't have any known EEPROM. Signed-off-by: NAlexey Charkov <alchark@gmail.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Charkov 提交于
Use more generic data structures instead of struct pci_dev wherever possible in preparation for OF bus binding Signed-off-by: NAlexey Charkov <alchark@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Charkov 提交于
Remove legacy PCI DMA wrappers and instead use generic DMA functions directly in preparation for OF bus binding Signed-off-by: NAlexey Charkov <alchark@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2014 2 次提交
-
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in velocity_xmit that can be called in hard irq and other contexts. Packets are freed and dropped in velocity_xmit when they are too fragmented and can not be linearized. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in rhine_start_tx which can be called in hard irq and other contexts. Packets are only freed in rhine_start_tx if they are dropped. Replace dev_kfree_skb with dev_consume_skb_any in rhine_tx that can be called in hard irq and other contexts. rhine_tx handles successfully transmitted packets. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 20 3月, 2014 1 次提交
-
-
由 Roger Luethi 提交于
Currently, via-rhine fails to call pci_disable_device() for errors in rhine_init_one(). Reported-by: NHuqiu Liu <liuhq11@mails.tsinghua.edu.cn> Signed-off-by: NRoger Luethi <rl@hellgate.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 3月, 2014 1 次提交
-
-
由 wangweidong 提交于
In generic, after an assignment, we use ';' instead of ','. Although, it won't hurt. Signed-off-by: NWang Weidong <wangweidong1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 3月, 2014 1 次提交
-
-
由 Eric W. Biederman 提交于
Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 1月, 2014 1 次提交
-
-
由 Richard Weinberger 提交于
rhine_reset_task() misses to disable the tx scheduler upon reset, this can lead to a crash if work is still scheduled while we're resetting the tx queue. Fixes: [ 93.591707] BUG: unable to handle kernel NULL pointer dereference at 0000004c [ 93.595514] IP: [<c119d10d>] rhine_napipoll+0x491/0x6 Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 11月, 2013 1 次提交
-
-
由 françois romieu 提交于
2fdac010 ("via-velocity.c: update napi implementation") overlooked an irq disabling spinlock when the Rx part of the NAPI poll handler was converted from netif_rx to netif_receive_skb. NAPI Rx processing can be taken out of the locked section with a pair of napi_{disable / enable} since it only races with the MTU change function. An heavier rework of the NAPI locking would be able to perform NAPI Tx before Rx where I simply removed one of velocity_tx_srv calls. References: https://bugzilla.redhat.com/show_bug.cgi?id=1022733 Fixes: 2fdac010 (via-velocity.c: update napi implementation) Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Tested-by: NAlex A. Schmidt <aaschmidt1@gmail.com> Cc: Jamie Heilman <jamie@audible.transient.net> Cc: Michele Baldessari <michele@acksyn.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 11月, 2013 1 次提交
-
-
由 John Stultz 提交于
In order to enable lockdep on seqcount/seqlock structures, we must explicitly initialize any locks. The u64_stats_sync structure, uses a seqcount, and thus we need to introduce a u64_stats_init() function and use it to initialize the structure. This unfortunately adds a lot of fairly trivial initialization code to a number of drivers. But the benefit of ensuring correctness makes this worth while. Because these changes are required for lockdep to be enabled, and the changes are quite trivial, I've not yet split this patch out into 30-some separate patches, as I figured it would be better to get the various maintainers thoughts on how to best merge this change along with the seqcount lockdep enablement. Feedback would be appreciated! Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Acked-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Jesse Gross <jesse@nicira.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mirko Lindner <mlindner@marvell.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Roger Luethi <rl@hellgate.ch> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Horman <horms@verge.net.au> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Wensong Zhang <wensong@linux-vs.org> Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/1381186321-4906-2-git-send-email-john.stultz@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 24 10月, 2013 1 次提交
-
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 9月, 2013 1 次提交
-
-
由 Roger Luethi 提交于
Outgoing packets sent by via-rhine have their VLAN PCP field off by one (when hardware acceleration is enabled). The TX descriptor expects only VID and PCP (without a CFI/DEI bit). Peter Boström noticed and reported the bug. Signed-off-by: NRoger Luethi <rl@hellgate.ch> Cc: Peter Boström <peter.bostrom@netrounds.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 8月, 2013 1 次提交
-
-
由 Julia Lawall 提交于
Drivers supporting NAPI should use a NAPI-specific function for receiving packets. Hence netif_rx is changed to netif_receive_skb. Furthermore netif_napi_del should be used in the probe and remove function to clean up the NAPI resource information. Thanks to Francois Romieu, David Shwatrz and Rami Rosen for their help on this patch. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 8月, 2013 1 次提交
-
-
由 Sachin Kamat 提交于
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 7月, 2013 1 次提交
-
-
由 Amit Uttamchandani 提交于
Add poll controller function for velocity nic. Signed-off-by: NAmit Uttamchandani <auttamchandani@logicube.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 7月, 2013 1 次提交
-
-
由 Neil Horman 提交于
this bug: https://bugzilla.redhat.com/show_bug.cgi?id=951695 Reported a dma debug backtrace: WARNING: at lib/dma-debug.c:937 check_unmap+0x47d/0x930() Hardware name: To Be Filled By O.E.M. via-rhine 0000:00:12.0: DMA-API: device driver failed to check map error[device address=0x0000000075a837b2] [size=90 bytes] [mapped as single] Modules linked in: ip6_tables gspca_spca561 gspca_main videodev media snd_hda_codec_realtek snd_hda_intel i2c_viapro snd_hda_codec snd_hwdep snd_seq ppdev mperf via_rhine coretemp snd_pcm mii microcode snd_page_alloc snd_timer snd_mpu401 snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore parport_pc parport shpchp ata_generic pata_acpi radeon i2c_algo_bit drm_kms_helper ttm drm pata_via sata_via i2c_core uinput Pid: 295, comm: systemd-journal Not tainted 3.9.0-0.rc6.git2.1.fc20.x86_64 #1 Call Trace: <IRQ> [<ffffffff81068dd0>] warn_slowpath_common+0x70/0xa0 [<ffffffff81068e4c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8137ec6d>] check_unmap+0x47d/0x930 [<ffffffff810ace9f>] ? local_clock+0x5f/0x70 [<ffffffff8137f17f>] debug_dma_unmap_page+0x5f/0x70 [<ffffffffa0225edc>] ? rhine_ack_events.isra.14+0x3c/0x50 [via_rhine] [<ffffffffa02275f8>] rhine_napipoll+0x1d8/0xd80 [via_rhine] [<ffffffff815d3d51>] ? net_rx_action+0xa1/0x380 [<ffffffff815d3e22>] net_rx_action+0x172/0x380 [<ffffffff8107345f>] __do_softirq+0xff/0x400 [<ffffffff81073925>] irq_exit+0xb5/0xc0 [<ffffffff81724cd6>] do_IRQ+0x56/0xc0 [<ffffffff81719ff2>] common_interrupt+0x72/0x72 <EOI> [<ffffffff8170ff57>] ? __slab_alloc+0x4c2/0x526 [<ffffffff811992e0>] ? mmap_region+0x2b0/0x5a0 [<ffffffff810d5807>] ? __lock_is_held+0x57/0x80 [<ffffffff811992e0>] ? mmap_region+0x2b0/0x5a0 [<ffffffff811bf1bf>] kmem_cache_alloc+0x2df/0x360 [<ffffffff811992e0>] mmap_region+0x2b0/0x5a0 [<ffffffff811998e6>] do_mmap_pgoff+0x316/0x3d0 [<ffffffff81183ca0>] vm_mmap_pgoff+0x90/0xc0 [<ffffffff81197d6c>] sys_mmap_pgoff+0x4c/0x190 [<ffffffff81367d7e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8101eb42>] sys_mmap+0x22/0x30 [<ffffffff81722fd9>] system_call_fastpath+0x16/0x1b Usual problem with the usual fix, add the appropriate calls to dma_mapping_error where appropriate Untested, as I don't have hardware, but its pretty straightforward Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: David S. Miller <davem@davemloft.net> CC: Roger Luethi <rl@hellgate.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 6月, 2013 1 次提交
-
-
由 Yijing Wang 提交于
Use standard PM state macros PCI_Dx instead of numeric 0/1/2.. Signed-off-by: NYijing Wang <wangyijing@huawei.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 6月, 2013 1 次提交
-
-
由 Ben Hutchings 提交于
All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 5月, 2013 3 次提交
-
-
由 Tony Prisk 提交于
Add support for the VIA Velocity network driver to be bound to a OF created platform device. Signed-off-by: NTony Prisk <linux@prisktech.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Prisk 提交于
Remove the pci_* dma functions and replace with the more generic versions. In preparation of adding platform support, a new struct device *dev is added to struct velocity_info which can be used by both the pci and platform code. Signed-off-by: NTony Prisk <linux@prisktech.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Prisk 提交于
Improve the clarity of the code in preparation for converting the dma functions to generic versions, which require a struct device *. This makes it possible to store a 'struct device *dev' in the velocity_info structure. Signed-off-by: NTony Prisk <linux@prisktech.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2013 3 次提交
-
-
由 Patrick McHardy 提交于
Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 2月, 2013 1 次提交
-
-
由 David S. Miller 提交于
1) rhine_tx() should use dev_kfree_skb() not dev_kfree_skb_irq() 2) rhine_slow_event_task's NAPI triggering logic is racey, it should just hit the interrupt mask register. This is the same as commit 7dbb4918 ("r8169: avoid NAPI scheduling delay.") made to fix the same problem in the r8169 driver. From Francois Romieu. Reported-by: NJamie Gloudon <jamie.gloudon@gmail.com> Tested-by: NJamie Gloudon <jamie.gloudon@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2013 1 次提交
-
-
由 Jamie Gloudon 提交于
Switch to use ndo_get_stats64 to get 64bit statistics. Signed-off-by: NJamie Gloudon <jamie.gloudon@gmail.com> Tested-by: NJamie Gloudon <jamie.gloudon@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 1月, 2013 1 次提交
-
-
由 Jiri Pirko 提交于
perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 12月, 2012 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2012 2 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Roger Luethi <rl@hellgate.ch> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 6月, 2012 1 次提交
-
-
由 Joe Perches 提交于
Adding casts of objects to the same type is unnecessary and confusing for a human reader. For example, this cast: int y; int *p = (int *)&y; I used the coccinelle script below to find and remove these unnecessary casts. I manually removed the conversions this script produces of casts with __force, __iomem and __user. @@ type T; T *p; @@ - (T *)p + p A function in atl1e_main.c was passed a const pointer when it actually modified elements of the structure. Change the argument to a non-const pointer. A function in stmmac needed a __force to avoid a sparse warning. Added it. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 4月, 2012 2 次提交
-
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: David Lv <DavidLv@viatech.com.cn>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: David Lv <DavidLv@viatech.com.cn>
-
- 02 4月, 2012 1 次提交
-
-
由 Andreas Mohr 提交于
Bug appeared in a384a33b ("via-rhine: RHINE_WAIT_FOR macro removal). It can be noticed during suspend/resume. Signed-off-by: NAndreas Mohr <andi@lisas.de> Acked-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: David Lv <DavidLv@viatech.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 2月, 2012 1 次提交
-
-
由 Danny Kukawka 提交于
Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2012 1 次提交
-
-
由 Pradeep A. Dalvi 提交于
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: NPradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 2月, 2012 1 次提交
-
-
由 David Lv 提交于
Initially diagnosed on Ubuntu 11.04 with kernel 2.6.38. velocity_close is not called during a suspend / resume cycle in this driver and it has no business playing directly with power states. Signed-off-by: NDavid Lv <DavidLv@viatech.com.cn> Acked-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 2月, 2012 1 次提交
-
-
由 Joe Perches 提交于
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 1月, 2012 1 次提交
-
-
由 Francois Romieu 提交于
Cover of 861ab440. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
-