- 16 6月, 2021 3 次提交
-
-
由 Nirmoy Das 提交于
Make provision to pass different ttm BO destroy callback while creating a amdgpu_bo. Signed-off-by: NNirmoy Das <nirmoy.das@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Nirmoy Das 提交于
Page table entries are now in embedded in VM BO, so we do not need struct amdgpu_vm_pt. This patch replaces struct amdgpu_vm_pt with struct amdgpu_vm_bo_base. Signed-off-by: NNirmoy Das <nirmoy.das@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hawking Zhang 提交于
For ASICs that need to load sys_drv_aux and sos_aux, the sys_start_addr is not the start address of psp ucode array because the sys_drv_aux and sos_aux actaully located at the end of the ucode array, instead, the psp ucode arrary start address should be sos_hdr + sos_hdr_offset. Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NJohn Clements <John.Clements@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 12 6月, 2021 13 次提交
-
-
由 Hawking Zhang 提交于
GECC and G6 mem training are mutually exclusive functionalities. VBIOS/PSP will set the flag (BOOT_CFG_FEATURE_TWO_STAGE_DRAM_TRAINING) in runtime database to indicate whether dram memory training need to be disabled or not. For Navi1x families, two stage mem training is always enabled. Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NJohn Clements <john.clements@amd.com> Reviewed-by: NLijo Lazar <lijo.lazar@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hawking Zhang 提交于
PSP runtime boot_cfg_bitmask carries various psp bl feature bit mask that can be used by driver. Cache it in sw_init for further usage. Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NJohn Clements <john.clements@amd.com> Reviewed-by: NLijo Lazar <lijo.lazar@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hawking Zhang 提交于
PSP will dump various boot up information into a portion of local frame buffer, called runtime database. The helper function is used for driver to query those shared information. v2: init ret and check !ret to exit loop as soon as found the entry Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NJohn Clements <john.clements@amd.com> Reviewed-by: NLijo Lazar <lijo.lazar@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hawking Zhang 提交于
PSP runtime database is used to share various boot up information with driver. Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NJohn Clements <john.clements@amd.com> Reviewed-by: NLijo Lazar <lijo.lazar@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hawking Zhang 提交于
Dynamic GECC allows user to specify GECC enablement status, which will take effect in next boot cycle. v2: initialize boot_cfg to 0xFF Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NJohn Clements <john.clements@amd.com> Reviewed-by: NLijo Lazar <lijo.lazar@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hawking Zhang 提交于
Query GECC enablement status in boot config Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NJohn Clements <john.clements@amd.com> Reviewed-by: NLijo Lazar <lijo.lazar@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hawking Zhang 提交于
More boot configs need to be supported via BOOTCFG_CMD_SET Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NJohn Clements <john.clements@amd.com> Reviewed-by: NLijo Lazar <lijo.lazar@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hawking Zhang 提交于
psp_gfx_uresp_bootcfg is used to inform driver bootcfg settings maintained by tOS Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NJohn Clements <john.clements@amd.com> Reviewed-by: NLijo Lazar <lijo.lazar@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Guchun Chen 提交于
Use adev_to_drm() to get to the drm_device pointer. Signed-off-by: NGuchun Chen <guchun.chen@amd.com> Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 YuBiao Wang 提交于
[Why] psp ring wptr is not initialized properly in ring_create, which would lead to psp failure after several gpu reset. [How] Set ring_wptr to zero in psp_ring_create. Signed-off-by: NYuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: NHorace Chen <horace.chen@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Peng Ju Zhou 提交于
The original code returns IP version of instantce_0 for every IP. This implementation may be correct for most of IPs. However, for certain IP block (VCN for example), it may have 2 instances and both of them have the same hw_id, BUT they have different revision number (0 and 1). In this case, the original amdgpu_discovery_get_ip_version cannot correct reflects the result and returns false information Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com> Signed-off-by: NPeng Ju Zhou <PengJu.Zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
To correctly kick into BACO state, the audio dev's D-state transition(D0->D3) needs to be PMFW-aware. So, if the audio dev entered D3 state prior to our driver, we need to bring it back to D0 state and make sure there will be a D-state transition on runpm suspend. Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NLijo Lazar <lijo.lazar@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
As the fix by adding PPSMC_MSG_PrepareMp1ForUnload is proved to be incomplete. Another fix(see link below) has been sent out. Link: https://lore.kernel.org/linux-pci/20210602021255.939090-1-evan.quan@amd.com/Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NLijo Lazar <lijo.lazar@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 10 6月, 2021 5 次提交
-
-
由 John Clements 提交于
In the case with xgmi connected to cpu load alternate psp fw Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NJohn Clements <john.clements@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 John Clements 提交于
synchronized fw header with latest source Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NJohn Clements <john.clements@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Nirmoy Das 提交于
Fixes handling when page tables are in system memory. v3: remove struct amdgpu_vm_parser. v2: remove unwanted variable. change amdgpu_amdkfd_validate instead of amdgpu_amdkfd_bo_validate. Signed-off-by: NNirmoy Das <nirmoy.das@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> -
由 Dave Airlie 提交于
This fixes 32-bit arm build due to lack of 64-bit divides. Fixes: cb1c8146 ("drm/ttm: flip the switch for driver allocated resources v2") Link: https://patchwork.freedesktop.org/patch/438442/Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Drop disabling of gfxoff during VCN use. This allows gfxoff to kick in and potentially save power if the user is not using gfx for color space conversion or scaling. VCN1.0 had a bug which prevented it from working properly with gfxoff, so we disabled it while using VCN. That said, most apps today use gfx for scaling and color space conversion rather than overlay planes so it was generally in use anyway. This was fixed on VCN2+, but since we mostly use gfx for color space conversion and scaling and rapidly powering up/down gfx can negate the advantages of gfxoff, we left gfxoff disabled. As more applications use overlay planes for color space conversion and scaling, this starts to be a win, so go ahead and leave gfxoff enabled. Note that VCN1.0 uses vcn_v1_0_idle_work_handler() and vcn_v1_0_ring_begin_use() so they are not affected by this patch. Reviewed-by: NJames Zhu <James.Zhu@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NBoyuan Zhang <Boyuan.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 09 6月, 2021 7 次提交
-
-
由 Rohit Khaire 提交于
This is similar to IH_RB_CNTL programming in navi10_ih_toggle_ring_interrupts Signed-off-by: NRohit Khaire <rohit.khaire@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NHorace Chen <horace.chen@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Zhigang Luo 提交于
psp added new feature to check fw buffer address for sriov vf. the address range must be in vf fb. Signed-off-by: NZhigang Luo <zhigang.luo@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-By : Shaoyun.liu <shaoyunl@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Zhigang Luo 提交于
need to load xgmi ta for aldebaran sriov vf. Signed-off-by: NZhigang Luo <zhigang.luo@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-By : Shaoyun.liu <shaoyunl@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Zhigang Luo 提交于
host driver programmed mmhub system aperture and fb location for vf, no need to program in guest side. Signed-off-by: NZhigang Luo <zhigang.luo@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-By : Shaoyun.liu <shaoyunl@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Zhigang Luo 提交于
host driver programmed the gfxhub fb location for vf, no need to program in guest side. Signed-off-by: NZhigang Luo <zhigang.luo@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-By : Shaoyun.liu <shaoyunl@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Zhigang Luo 提交于
host driver programmed fb location registers for vf, no need to check anymore. Signed-off-by: NZhigang Luo <zhigang.luo@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-By : Shaoyun.liu <shaoyunl@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Nirmoy Das 提交于
Create shadow BOs only for no-compute VM context and only for dGPU. The existing if-condition would create shadow bo for compute context on dGPU which not what we wanted. Signed-off-by: NNirmoy Das <nirmoy.das@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 08 6月, 2021 6 次提交
-
-
由 Christophe JAILLET 提交于
s/than/then/ Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
Add the parameter table_freed description on function description. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
For GTT allocations with a GART address the res contains the VMID0 addresses and can't be used for VM handling. So ignore the res when the pages array is given or we fill the page tables with nonsense. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NNirmoy Das <nirmoy.das@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Peng Ju Zhou 提交于
The NV12 and VEGA10 share the same interface W/RREG32_SOC15*, the callback functions in these macros may not be defined, so NULL pointer must be checked but not in macro __WREG32_SOC15_RLC__, fixing the lock of NULL pointer check. Signed-off-by: NPeng Ju Zhou <PengJu.Zhou@amd.com> Reviewed-by: NEmily Deng <Emily.Deng@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 John Clements 提交于
Disable support on APU Reviewed-by: NChangfeng <Changfeng.Zhu@amd.com> Signed-off-by: NJohn Clements <john.clements@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rohit Khaire 提交于
In SRIOV environment, KMD should access SDMA registers through RLCG if GC indirect access flag enabled. Using _SOC15 read/write macros ensures that they go through RLC when the flag is enabled. Signed-off-by: NRohit Khaire <rohit.khaire@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 07 6月, 2021 1 次提交
-
-
由 Thomas Hellström 提交于
We are calling the eviction_valuable driver callback at eviction time to determine whether we actually can evict a buffer object. The upcoming i915 TTM backend needs the same functionality for swapout, and that might actually be beneficial to other drivers as well. Add an eviction_valuable call also in the swapout path. Try to keep the current behaviour for all drivers by returning true if the buffer object is already in the TTM_PL_SYSTEM placement. We change behaviour for the case where a buffer object is in a TT backed placement when swapped out, in which case the drivers normal eviction_valuable path is run. Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NThomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: NChristian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20210602083818.241793-8-thomas.hellstrom@linux.intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20210602083818.241793-8-thomas.hellstrom@linux.intel.com
-
- 06 6月, 2021 3 次提交
-
-
由 Christian König 提交于
The functions can be called both in _rcu context as well as while holding the lock. v2: add some kerneldoc as suggested by Daniel v3: fix indentation Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NJason Ekstrand <jason@jlekstrand.net> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210602111714.212426-7-christian.koenig@amd.com
-
由 Christian König 提交于
When the comment needs to state explicitly that this is doesn't get a reference to the object then the function is named rather badly. Rename the function and use it in even more places. v2: use dma_resv_shared_list as new name Signed-off-by: NChristian König <christian.koenig@amd.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210602111714.212426-5-christian.koenig@amd.com
-
由 Christian König 提交于
When the comment needs to state explicitly that this doesn't get a reference to the object then the function is named rather badly. Rename the function and use rcu_dereference_check(), this way it can be used from both rcu as well as lock protected critical sections. v2: improve kerneldoc as suggested by Daniel v3: use dma_resv_excl_fence as function name Signed-off-by: NChristian König <christian.koenig@amd.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NJason Ekstrand <jason@jlekstrand.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210602111714.212426-4-christian.koenig@amd.com
-
- 05 6月, 2021 2 次提交
-
-
由 Nicholas Kazlauskas 提交于
To enable output on real display instead of virtual. Acked-by: NHuang Rui <ray.huang@amd.com> Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 James Zhu 提交于
Add video_codecs query support for yellow carp. Acked-by: NHuang Rui <ray.huang@amd.com> Signed-off-by: NJames Zhu <James.Zhu@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-