Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 15 1月, 2014 5 次提交
    • P
      pseries/cpuidle: Remove redundant call to ppc64_runlatch_off() in cpu idle routines · c0c4301c
      由 Preeti U Murthy 提交于 
      Commit fbd7740f(powerpc: Simplify pSeries idle loop) switched pseries cpu
idle handling from complete idle loops to ppc_md.powersave functions. Earlier to
this switch, ppc64_runlatch_off() had to be called in each of the idle routines.
But after the switch, this call is handled in arch_cpu_idle(),just before the call
to ppc_md.powersave, where platform specific idle routines are called.

As a consequence, the call to ppc64_runlatch_off() got duplicated in the
arch_cpu_idle() routine as well as in the some of the idle routines in
pseries and commit fbd7740f missed to get rid of these redundant
calls. These calls were carried over subsequent enhancements to the pseries
cpuidle routines.

Although multiple calls to ppc64_runlatch_off() is harmless, there is still some
overhead due to it. Besides that, these calls could also make way for a
misunderstanding that it is *necessary* to call ppc64_runlatch_off() multiple
times, when that is not the case. Hence this patch takes care of eliminating
this redundancy.
Signed-off-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      c0c4301c
    • G
      powerpc/eeh: Add restore_config operation · 1d350544
      由 Gavin Shan 提交于 
      After reset on the specific PE or PHB, we never configure AER
correctly on PowerNV platform. We needn't care it on pSeries
platform. The patch introduces additional EEH operation eeh_ops::
restore_config() so that we have chance to configure AER correctly
for PowerNV platform.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      1d350544
    • N
      Revert "pseries/iommu: Remove DDW on kexec" · 97e7dc52
      由 Nishanth Aravamudan 提交于 
      After reverting 25ebc45b
("powerpc/pseries/iommu: remove default window before attempting DDW
manipulation"), we no longer remove the base window in enable_ddw.
Therefore, we no longer need to reset the DMA window state in
find_existing_ddw_windows(). We can instead go back to what was done
before, which simply reuses the previous configuration, if any. Further,
this removes the final caller of the reset-pe-dma-windows call, so
remove those functions.

This fixes an EEH on kdump with the ipr driver. The EEH occurs, because
the initcall removes the DDW configuration (64-bit DMA window), but
doesn't ensure the ops are via the IOMMU -- a DMA operation occurs
during probe (still investigating this) and we EEH.

This reverts commit 14b6f00f.
Signed-off-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      97e7dc52
    • N
      Revert "powerpc/pseries/iommu: remove default window before attempting DDW manipulation" · ae69e1ed
      由 Nishanth Aravamudan 提交于 
      Ben rightfully pointed out that there is a race in the "newer" DDW code.
Presuming we are running on recent enough firmware that supports the
"reset" DDW manipulation call, we currently always remove the base
32-bit DMA window in order to maximize the resources for Phyp when
creating the 64-bit window. However, this can be problematic for the
case where multiple functions are in the same PE (partitionable
endpoint), where some funtions might be 32-bit DMA only. All of a
sudden, the only functional DMA window for such functions is gone. We
will have serious errors in such situations. The best solution is simply
to revert the extension to the DDW code where we ever remove the base
DMA window.

This reverts commit 25ebc45b.
Signed-off-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      ae69e1ed
    • P
      powerpc: Delete non-required instances of include <linux/init.h> · c141611f
      由 Paul Gortmaker 提交于 
      None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

The one instance where we add an include for init.h covers off
a case where that file was implicitly getting it from another
header which itself didn't need it.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      c141611f
  3. 11 1月, 2014 2 次提交
  5. 30 12月, 2013 2 次提交
  7. 13 12月, 2013 4 次提交
  9. 09 12月, 2013 2 次提交
  11. 05 12月, 2013 1 次提交
    • A
      PPC: POWERNV: move iommu_add_device earlier · d905c5df
      由 Alexey Kardashevskiy 提交于 
      The current implementation of IOMMU on sPAPR does not use iommu_ops
and therefore does not call IOMMU API's bus_set_iommu() which
1) sets iommu_ops for a bus
2) registers a bus notifier
Instead, PCI devices are added to IOMMU groups from
subsys_initcall_sync(tce_iommu_init) which does basically the same
thing without using iommu_ops callbacks.

However Freescale PAMU driver (https://lkml.org/lkml/2013/7/1/158)
implements iommu_ops and when tce_iommu_init is called, every PCI device
is already added to some group so there is a conflict.

This patch does 2 things:
1. removes the loop in which PCI devices were added to groups and
adds explicit iommu_add_device() calls to add devices as soon as they get
the iommu_table pointer assigned to them.
2. moves a bus notifier to powernv code in order to avoid conflict with
the notifier from Freescale driver.

iommu_add_device() and iommu_del_device() are public now.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      d905c5df
  13. 02 12月, 2013 1 次提交
  15. 26 11月, 2013 1 次提交
  17. 21 11月, 2013 3 次提交
  19. 15 11月, 2013 1 次提交
  21. 31 10月, 2013 2 次提交
  23. 30 10月, 2013 1 次提交
  25. 24 10月, 2013 3 次提交
    • G
      of/irq: simplify args to irq_create_of_mapping · e6d30ab1
      由 Grant Likely 提交于 
      All the callers of irq_create_of_mapping() pass the contents of a struct
of_phandle_args structure to the function. Since all the callers already
have an of_phandle_args pointer, why not pass it directly to
irq_create_of_mapping()?
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      e6d30ab1
    • G
      of/irq: Replace of_irq with of_phandle_args · 530210c7
      由 Grant Likely 提交于 
      struct of_irq and struct of_phandle_args are exactly the same structure.
This patch makes the kernel use of_phandle_args everywhere. This in
itself isn't a big deal, but it makes some follow-on patches simpler.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      530210c7
    • G
      of/irq: Rename of_irq_map_* functions to of_irq_parse_* · 0c02c800
      由 Grant Likely 提交于 
      The OF irq handling code has been overloading the term 'map' to refer to
both parsing the data in the device tree and mapping it to the internal
linux irq system. This is probably because the device tree does have the
concept of an 'interrupt-map' function for translating interrupt
references from one node to another, but 'map' is still confusing when
the primary purpose of some of the functions are to parse the DT data.

This patch renames all the of_irq_map_* functions to of_irq_parse_*
which makes it clear that there is a difference between the parsing
phase and the mapping phase. Kernel code can make use of just the
parsing or just the mapping support as needed by the subsystem.

The patch was generated mechanically with a handful of sed commands.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      0c02c800
  27. 14 10月, 2013 1 次提交
  29. 11 10月, 2013 1 次提交
  31. 10 10月, 2013 1 次提交
    • R
      powerpc: add explicit OF includes · 26a2056e
      由 Rob Herring 提交于 
      When removing prom.h include by of.h, several OF headers will no longer
be implicitly included. Add explicit includes of of_*.h as needed.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NGrant Likely <grant.likely@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: linuxppc-dev@lists.ozlabs.org
      26a2056e
  33. 01 10月, 2013 1 次提交
    • T
      hotplug, powerpc, x86: Remove cpu_hotplug_driver_lock() · 6dedcca6
      由 Toshi Kani 提交于 
      cpu_hotplug_driver_lock() serializes CPU online/offline operations
when ARCH_CPU_PROBE_RELEASE is set.  This lock interface is no longer
necessary with the following reason:

 - lock_device_hotplug() now protects CPU online/offline operations,
   including the probe & release interfaces enabled by
   ARCH_CPU_PROBE_RELEASE.  The use of cpu_hotplug_driver_lock() is
   redundant.
 - cpu_hotplug_driver_lock() is only valid when ARCH_CPU_PROBE_RELEASE
   is defined, which is misleading and is only enabled on powerpc.

This patch removes the cpu_hotplug_driver_lock() interface.  As
a result, ARCH_CPU_PROBE_RELEASE only enables / disables the cpu
probe & release interface as intended.  There is no functional change
in this patch.
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Reviewed-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      6dedcca6
  35. 25 9月, 2013 1 次提交
  37. 11 9月, 2013 1 次提交
  39. 28 8月, 2013 1 次提交
  41. 27 8月, 2013 5 次提交