- 06 5月, 2012 3 次提交
-
-
由 Jan Kara 提交于
Doing iput() from flusher thread (writeback_sb_inodes()) can create problems because iput() can do a lot of work - for example truncate the inode if it's the last iput on unlinked file. Some filesystems depend on flusher thread progressing (e.g. because they need to flush delay allocated blocks to reduce allocation uncertainty) and so flusher thread doing truncate creates interesting dependencies and possibilities for deadlocks. We get rid of iput() in flusher thread by using the fact that I_SYNC inode flag effectively pins the inode in memory. So if we take care to either hold i_lock or have I_SYNC set, we can get away without taking inode reference in writeback_sb_inodes(). As a side effect of these changes, we also fix possible use-after-free in wb_writeback() because inode_wait_for_writeback() call could try to reacquire i_lock on the inode that was already free. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
-
由 Jan Kara 提交于
After we moved inode_sync_wait() from end_writeback() it doesn't make sense to call the function end_writeback() anymore. Rename it to clear_inode() which well says what the function really does - set I_CLEAR flag. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
-
由 Jan Kara 提交于
Currently, I_SYNC can never be set when evict_inode() (and thus end_writeback()) is called because flusher thread holds inode reference while inode is under writeback. As a result inode_sync_wait() in those places currently does nothing. However that is going to change and unveils problems with calling inode_sync_wait() from end_writeback(). Several filesystems call end_writeback() after they have deleted the inode (btrfs, gfs2, ...) and other filesystems (ext3, ext4, reiserfs, ...) can deadlock when waiting for I_SYNC because they call end_writeback() from within a transaction. To avoid these issues, we move inode_sync_wait() into evict_inode() before calling ->evict_inode(). That way we preserve the current property that ->evict_inode() and writeback never run in parallel and all filesystems are safe. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
-
- 21 3月, 2012 3 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Once upon a time it used to be much bigger, but these days there's no point whatsoever keeping it in fs/inode.c, especially since it's not even needed as initializer for ->drop_inode() - it's the default and leaving ->drop_inode NULL will do just as well. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 11 3月, 2012 2 次提交
-
-
由 Al Viro 提交于
wait_on_inode() doesn't have ->i_lock Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Tyler Hicks 提交于
9a7aa12f introduced additional logic around setting the i_mutex lockdep class for directory inodes. The idea was that some filesystems may want their own special lockdep class for different directory inodes and calling unlock_new_inode() should not clobber one of those special classes. I believe that the added conditional, around the *negated* return value of lockdep_match_class(), caused directory inodes to be placed in the wrong lockdep class. inode_init_always() sets the i_mutex lockdep class with i_mutex_key for all inodes. If the filesystem did not change the class during inode initialization, then the conditional mentioned above was false and the directory inode was incorrectly left in the non-directory lockdep class. If the filesystem did set a special lockdep class, then the conditional mentioned above was true and that class was clobbered with i_mutex_dir_key. This patch removes the negation from the conditional so that the i_mutex lockdep class is properly set for directory inodes. Special classes are preserved and directory inodes with unmodified classes are set with i_mutex_dir_key. Signed-off-by: NTyler Hicks <tyhicks@canonical.com> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 29 2月, 2012 1 次提交
-
-
由 Paul Gortmaker 提交于
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map them onto including export.h -- or if the file isn't even using those, then just delete the include. Fix up any implicit include dependencies that were being masked by module.h along the way. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 14 2月, 2012 1 次提交
-
-
由 Dimitri Sivanich 提交于
When the number of dentry cache hash table entries gets too high (2147483648 entries), as happens by default on a 16TB system, use of a signed integer in the dcache_init() initialization loop prevents the dentry_hashtable from getting initialized, causing a panic in __d_lookup(). Fix this in dcache_init() and similar areas. Signed-off-by: NDimitri Sivanich <sivanich@sgi.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 18 1月, 2012 1 次提交
-
-
由 Miklos Szeredi 提交于
Don't log a message for set_nlink(0). Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 11 1月, 2012 1 次提交
-
-
由 Konstantin Khlebnikov 提交于
Inode cache pruning indirectly reclaims page-cache by invalidating mapping pages. Let's account them into reclaim-state to notice this progress in memory reclaimer. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 1月, 2012 1 次提交
-
-
由 Miklos Szeredi 提交于
Add a new counter to the superblock that keeps track of unlinked but not yet deleted inodes. Do not WARN_ON if set_nlink is called with zero count, just do a ratelimited printk. This happens on xfs and probably other filesystems after an unclean shutdown when the filesystem reads inodes which already have zero i_nlink. Reported by Christoph Hellwig. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 04 1月, 2012 3 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once(); the cost of taking it into inode_init_always() will be negligible for pipes and sockets and negative for everything else. Not to mention the removal of boilerplate code from ->destroy_inode() instances... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
new helper (wrapper around mnt_drop_write()) to be used in pair with mnt_want_write_file(). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 02 11月, 2011 1 次提交
-
-
由 Miklos Szeredi 提交于
Prevent direct modification of i_nlink by making it const and adding a non-const __i_nlink alias. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 28 10月, 2011 1 次提交
-
-
由 Christoph Hellwig 提交于
We need to move the inode to the end of the list to actually make the spinning prevention explained in the comment above it work. With a plain list_move it will simply stay in place as we're always reclaiming from the head of the list. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 26 8月, 2011 1 次提交
-
-
由 Josh Boyer 提交于
Purely in-memory filesystems do not use the inode hash as the dcache tells us if an entry already exists. As a result, they do not call unlock_new_inode, and thus directory inodes do not get put into a different lockdep class for i_sem. We need the different lockdep classes, because the locking order for i_mutex is different for directory inodes and regular inodes. Directory inodes can do "readdir()", which takes i_mutex *before* possibly taking mm->mmap_sem (due to a page fault while copying the directory entry to user space). In contrast, regular inodes can be mmap'ed, which takes mm->mmap_sem before accessing i_mutex. The two cases can never happen for the same inode, so no real deadlock can occur, but without the different lockdep classes, lockdep cannot understand that. As a result, if CONFIG_DEBUG_LOCK_ALLOC is set, this can lead to false positives from lockdep like below: find/645 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: [<ffffffff81109514>] might_fault+0x5c/0xac but task is already holding lock: (&sb->s_type->i_mutex_key#15){+.+.+.}, at: [<ffffffff81149f34>] vfs_readdir+0x5b/0xb4 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&sb->s_type->i_mutex_key#15){+.+.+.}: [<ffffffff8108ac26>] lock_acquire+0xbf/0x103 [<ffffffff814db822>] __mutex_lock_common+0x4c/0x361 [<ffffffff814dbc46>] mutex_lock_nested+0x40/0x45 [<ffffffff811daa87>] hugetlbfs_file_mmap+0x82/0x110 [<ffffffff81111557>] mmap_region+0x258/0x432 [<ffffffff811119dd>] do_mmap_pgoff+0x2ac/0x306 [<ffffffff81111b4f>] sys_mmap_pgoff+0x118/0x16a [<ffffffff8100c858>] sys_mmap+0x22/0x24 [<ffffffff814e3ec2>] system_call_fastpath+0x16/0x1b -> #0 (&mm->mmap_sem){++++++}: [<ffffffff8108a4bc>] __lock_acquire+0xa1a/0xcf7 [<ffffffff8108ac26>] lock_acquire+0xbf/0x103 [<ffffffff81109541>] might_fault+0x89/0xac [<ffffffff81149cff>] filldir+0x6f/0xc7 [<ffffffff811586ea>] dcache_readdir+0x67/0x205 [<ffffffff81149f54>] vfs_readdir+0x7b/0xb4 [<ffffffff8114a073>] sys_getdents+0x7e/0xd1 [<ffffffff814e3ec2>] system_call_fastpath+0x16/0x1b This patch moves the directory vs file lockdep annotation into a helper function that can be called by in-memory filesystems and has hugetlbfs call it. Signed-off-by: NJosh Boyer <jwboyer@redhat.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 8月, 2011 1 次提交
-
-
由 Linus Torvalds 提交于
The inode structure layout is largely random, and some of the vfs paths really do care. The path lookup in particular is already quite D$ intensive, and profiles show that accessing the 'inode->i_op->xyz' fields is quite costly. We already optimized the dcache to not unnecessarily load the d_op structure for members that are often NULL using the DCACHE_OP_xyz bits in dentry->d_flags, and this does something very similar for the inode ops that are used during pathname lookup. It also re-orders the fields so that the fields accessed by 'stat' are together at the beginning of the inode structure, and roughly in the order accessed. The effect of this seems to be in the 1-2% range for an empty kernel "make -j" run (which is fairly kernel-intensive, mostly in filename lookup), so it's visible. The numbers are fairly noisy, though, and likely depend a lot on exact microarchitecture. So there's more tuning to be done. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 8月, 2011 3 次提交
-
-
由 Eric Dumazet 提交于
inode_lru_list_del() is expensive because of per superblock lru locking, while some inodes are not in lru list. Adding a check in iput_final() can speedup pipe/sockets workloads on SMP. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Eric Dumazet 提交于
Some inodes (pipes, sockets, ...) are not hashed, no need to take contended inode_hash_lock at dismantle time. nice speedup on SMP machines on socket intensive workloads. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Eric Dumazet 提交于
Some inodes (pipes, sockets, ...) are not in bdi writeback list. evict() can avoid calling inode_wb_list_del() and its expensive spinlock by checking inode i_wb_list being empty or not. At this point, no other cpu/user can concurrently manipulate this inode i_wb_list Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 27 7月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Workloads using pipes and sockets hit inode_sb_list_lock contention. superblock s_inodes list is needed for quota, dirty, pagecache and fsnotify management. pipe/anon/socket fs are clearly not candidates for these. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 21 7月, 2011 3 次提交
-
-
由 Christoph Hellwig 提交于
i_alloc_sem is a rather special rw_semaphore. It's the last one that may be released by a non-owner, and it's write side is always mirrored by real exclusion. It's intended use it to wait for all pending direct I/O requests to finish before starting a truncate. Replace it with a hand-grown construct: - exclusion for truncates is already guaranteed by i_mutex, so it can simply fall way - the reader side is replaced by an i_dio_count member in struct inode that counts the number of pending direct I/O requests. Truncate can't proceed as long as it's non-zero - when i_dio_count reaches non-zero we wake up a pending truncate using wake_up_bit on a new bit in i_flags - new references to i_dio_count can't appear while we are waiting for it to read zero because the direct I/O count always needs i_mutex (or an equivalent like XFS's i_iolock) for starting a new operation. This scheme is much simpler, and saves the space of a spinlock_t and a struct list_head in struct inode (typically 160 bits on a non-debug 64-bit system). Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dave Chinner 提交于
Now that we have per-sb shrinkers with a lifecycle that is a subset of the superblock lifecycle and can reliably detect a filesystem being unmounted, there is not longer any race condition for the iprune_sem to protect against. Hence we can remove it. Signed-off-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dave Chinner 提交于
With context based shrinkers, we can implement a per-superblock shrinker that shrinks the caches attached to the superblock. We currently have global shrinkers for the inode and dentry caches that split up into per-superblock operations via a coarse proportioning method that does not batch very well. The global shrinkers also have a dependency - dentries pin inodes - so we have to be very careful about how we register the global shrinkers so that the implicit call order is always correct. With a per-sb shrinker callout, we can encode this dependency directly into the per-sb shrinker, hence avoiding the need for strictly ordering shrinker registrations. We also have no need for any proportioning code for the shrinker subsystem already provides this functionality across all shrinkers. Allowing the shrinker to operate on a single superblock at a time means that we do less superblock list traversals and locking and reclaim should batch more effectively. This should result in less CPU overhead for reclaim and potentially faster reclaim of items from each filesystem. Signed-off-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 20 7月, 2011 4 次提交
-
-
由 Dave Chinner 提交于
With the inode LRUs moving to per-sb structures, there is no longer a need for a global inode_lru_lock. The locking can be made more fine-grained by moving to a per-sb LRU lock, isolating the LRU operations of different filesytsems completely from each other. Signed-off-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dave Chinner 提交于
The inode unused list is currently a global LRU. This does not match the other global filesystem cache - the dentry cache - which uses per-superblock LRU lists. Hence we have related filesystem object types using different LRU reclaimation schemes. To enable a per-superblock filesystem cache shrinker, both of these caches need to have per-sb unused object LRU lists. Hence this patch converts the global inode LRU to per-sb LRUs. The patch only does rudimentary per-sb propotioning in the shrinker infrastructure, as this gets removed when the per-sb shrinker callouts are introduced later on. Signed-off-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dave Chinner 提交于
Before we split up the inode_lru_lock, the unused inode counter needs to be made independent of the global inode_lru_lock. Convert it to per-cpu counters to do this. Signed-off-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
never is... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 28 6月, 2011 1 次提交
-
-
由 Jan Kara 提交于
Under heavy memory and filesystem load, users observe the assertion mapping->nrpages == 0 in end_writeback() trigger. This can be caused by page reclaim reclaiming the last page from a mapping in the following race: CPU0 CPU1 ... shrink_page_list() __remove_mapping() __delete_from_page_cache() radix_tree_delete() evict_inode() truncate_inode_pages() truncate_inode_pages_range() pagevec_lookup() - finds nothing end_writeback() mapping->nrpages != 0 -> BUG page->mapping = NULL mapping->nrpages-- Fix the problem by doing a reliable check of mapping->nrpages under mapping->tree_lock in end_writeback(). Analyzed by Jay <jinshan.xiong@whamcloud.com>, lost in LKML, and dug out by Miklos Szeredi <mszeredi@suse.de>. Cc: Jay <jinshan.xiong@whamcloud.com> Cc: Miklos Szeredi <mszeredi@suse.de> Signed-off-by: NJan Kara <jack@suse.cz> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 6月, 2011 1 次提交
-
-
由 Christoph Hellwig 提交于
Split the global inode_wb_list_lock into a per-bdi_writeback list_lock, as it's currently the most contended lock in the system for metadata heavy workloads. It won't help for single-filesystem workloads for which we'll need the I/O-less balance_dirty_pages, but at least we can dedicate a cpu to spinning on each bdi now for larger systems. Based on earlier patches from Nick Piggin and Dave Chinner. It reduces lock contentions to 1/4 in this test case: 10 HDD JBOD, 100 dd on each disk, XFS, 6GB ram lock_stat version 0.3 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- class name con-bounces contentions waittime-min waittime-max waittime-total acq-bounces acquisitions holdtime-min holdtime-max holdtime-total ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- vanilla 2.6.39-rc3: inode_wb_list_lock: 42590 44433 0.12 147.74 144127.35 252274 886792 0.08 121.34 917211.23 ------------------ inode_wb_list_lock 2 [<ffffffff81165da5>] bdev_inode_switch_bdi+0x29/0x85 inode_wb_list_lock 34 [<ffffffff8115bd0b>] inode_wb_list_del+0x22/0x49 inode_wb_list_lock 12893 [<ffffffff8115bb53>] __mark_inode_dirty+0x170/0x1d0 inode_wb_list_lock 10702 [<ffffffff8115afef>] writeback_single_inode+0x16d/0x20a ------------------ inode_wb_list_lock 2 [<ffffffff81165da5>] bdev_inode_switch_bdi+0x29/0x85 inode_wb_list_lock 19 [<ffffffff8115bd0b>] inode_wb_list_del+0x22/0x49 inode_wb_list_lock 5550 [<ffffffff8115bb53>] __mark_inode_dirty+0x170/0x1d0 inode_wb_list_lock 8511 [<ffffffff8115b4ad>] writeback_sb_inodes+0x10f/0x157 2.6.39-rc3 + patch: &(&wb->list_lock)->rlock: 11383 11657 0.14 151.69 40429.51 90825 527918 0.11 145.90 556843.37 ------------------------ &(&wb->list_lock)->rlock 10 [<ffffffff8115b189>] inode_wb_list_del+0x5f/0x86 &(&wb->list_lock)->rlock 1493 [<ffffffff8115b1ed>] writeback_inodes_wb+0x3d/0x150 &(&wb->list_lock)->rlock 3652 [<ffffffff8115a8e9>] writeback_sb_inodes+0x123/0x16f &(&wb->list_lock)->rlock 1412 [<ffffffff8115a38e>] writeback_single_inode+0x17f/0x223 ------------------------ &(&wb->list_lock)->rlock 3 [<ffffffff8110b5af>] bdi_lock_two+0x46/0x4b &(&wb->list_lock)->rlock 6 [<ffffffff8115b189>] inode_wb_list_del+0x5f/0x86 &(&wb->list_lock)->rlock 2061 [<ffffffff8115af97>] __mark_inode_dirty+0x173/0x1cf &(&wb->list_lock)->rlock 2629 [<ffffffff8115a8e9>] writeback_sb_inodes+0x123/0x16f hughd@google.com: fix recursive lock when bdi_lock_two() is called with new the same as old akpm@linux-foundation.org: cleanup bdev_inode_switch_bdi() comment Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
-
- 27 5月, 2011 1 次提交
-
-
由 Christoph Hellwig 提交于
Move the lock order description after all the includes, remove several fairly outdated and/or incorrect comments, move Andrea's copyright/changelog to the top where it belongs, remove the pointless filename in the top of the file comment, and remove to useless macros. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 25 5月, 2011 3 次提交
-
-
由 Ying Han 提交于
Change each shrinker's API by consolidating the existing parameters into shrink_control struct. This will simplify any further features added w/o touching each file of shrinker. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: fix warning] [kosaki.motohiro@jp.fujitsu.com: fix up new shrinker API] [akpm@linux-foundation.org: fix xfs warning] [akpm@linux-foundation.org: update gfs2] Signed-off-by: NYing Han <yinghan@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Acked-by: NPavel Emelyanov <xemul@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Acked-by: NRik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Straightforward conversion of i_mmap_lock to a mutex. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NHugh Dickins <hughd@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Hugh says: "The only significant loser, I think, would be page reclaim (when concurrent with truncation): could spin for a long time waiting for the i_mmap_mutex it expects would soon be dropped? " Counter points: - cpu contention makes the spin stop (need_resched()) - zap pages should be freeing pages at a higher rate than reclaim ever can I think the simplification of the truncate code is definitely worth it. Effectively reverts: 2aa15890 ("mm: prevent concurrent unmap_mapping_range() on the same inode") and takes out the code that caused its problem. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 5月, 2011 1 次提交
-
-
由 Heiko Carstens 提交于
Fixes this build error on s390 and probably other archs as well: fs/inode.c: In function 'new_inode': fs/inode.c:894:2: error: implicit declaration of function 'spin_lock_prefetch' Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> [ Happens on architectures that don't define their own prefetch functions in <asm/processor.h>, and instead rely on the default ones in <linux/prefetch.h> - Linus] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 4月, 2011 1 次提交
-
-
由 Jens Axboe 提交于
With the ->sync_page() hook gone, we have a few users that add their own static address_space_operations without any functions defined. fs/inode.c already has an empty_aops that it uses for init purposes. Lets export that and use it in the places where an otherwise empty aops was defined. Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 28 3月, 2011 1 次提交
-
-
由 Randy Dunlap 提交于
Fix inode.c kernel-doc fatal error: 2 comment sections have the same name: Error(fs/inode.c:1171): duplicate section name 'Note' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-