- 18 5月, 2018 2 次提交
-
-
由 Alim Akhtar 提交于
In the right behavior, setting the bit to '0' indicates clear and '1' indicates no change. If host controller handles this the other way, UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR can be used. [mkp: typo] Signed-off-by: NSeungwon Jeon <essuuj@gmail.com> Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Reviewed-by: N"Asutosh Das (asd)" <asutoshd@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Kees Cook 提交于
On the quest to remove all VLAs from the kernel[1] this moves buffers off the stack. In the second instance, this collapses two separately allocated buffers into a single buffer, since they are used consecutively, which saves 256 bytes (QUERY_DESC_MAX_SIZE + 1) of stack space. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by: NKees Cook <keescook@chromium.org> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 22 3月, 2018 2 次提交
-
-
由 Adrian Hunter 提交于
UFS host controllers may support an autonomous power management feature called the Auto-Hibernate Idle Timer. The timer is set to the number of microseconds of idle time before the UFS host controller will autonomously put the link into Hibernate state. That will save power at the expense of increased latency. Any access to the host controller interface registers will automatically put the link out of Hibernate state. So once configured, the feature is transparent to the driver. Expose the Auto-Hibernate Idle Timer value via SysFS to allow users to choose between power efficiency or lower latency. Set a default value of 150 ms. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NStanislav Nijnikov <stanislav.nijnikov@wdc.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Stanislav Nijnikov 提交于
Read from these files will return the integer value of the chosen power management level now. Separate entries were added to show the target UFS device and UIC link states. The description of the possible power managements levels was added to the ABI file. The on-write behaviour of these entries wasn't changed. [mkp: typo] Signed-off-by: NStanislav Nijnikov <stanislav.nijnikov@wdc.com> Acked-by: NAdrian Hunter <adrian.hunter@intel.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 02 3月, 2018 1 次提交
-
-
由 Bart Van Assche 提交于
Avoid that the kernel-doc tool complains about mismatches between kernel-doc headers and function definitions. Avoid that errors like the following are reported when building the UFS driver with W=1: drivers/scsi/ufs/tc-dwc-g210-pci.c:60: error: Cannot parse struct or union! drivers/scsi/ufs/tc-dwc-g210-pltfrm.c:26: warning: cannot understand function prototype: 'struct ufs_hba_variant_ops tc_dwc_g210_20bit_pltfm_hba_vops = ' Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 16 2月, 2018 10 次提交
-
-
由 Stanislav Nijnikov 提交于
This patch introduces a sysfs group entry for the UFS attributes. The group adds "attributes" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The attributes are shown as hexadecimal numbers. The full information about the attributes could be found at UFS specifications 2.1. Signed-off-by: NStanislav Nijnikov <stanislav.nijnikov@wdc.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Stanislav Nijnikov 提交于
This patch introduces a sysfs group entry for the UFS flags. The group adds "flags" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The flags are shown as boolean value ("true" or "false"). The full information about the UFS flags could be found at UFS specifications 2.1. Signed-off-by: NStanislav Nijnikov <stanislav.nijnikov@wdc.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Stanislav Nijnikov 提交于
This patch introduces a sysfs group entry for the UFS unit descriptor parameters. The group adds "unit_descriptor" folder under the corresponding SCSI device sysfs entry (/sys/class/scsi_device/*/device/). The parameters are shown as hexadecimal numbers. The full information about the parameters could be found at UFS specifications 2.1. Signed-off-by: NStanislav Nijnikov <stanislav.nijnikov@wdc.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Stanislav Nijnikov 提交于
This patch introduces a sysfs group entry for the UFS string descriptors. The group adds "string_descriptors" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The folder will contain 5 files that will show string values defined by the UFS spec: a manufacturer name, a product name, an OEM id, a serial number and a product revision. The full information about the string descriptors could be found at UFS specifications 2.1. Signed-off-by: NStanislav Nijnikov <stanislav.nijnikov@wdc.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Stanislav Nijnikov 提交于
This patch introduces a sysfs group entry for the UFS power descriptor parameters. The group adds "power_descriptor" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown as hexadecimal numbers. The full information about the parameters could be found at UFS specifications 2.1. Signed-off-by: NStanislav Nijnikov <stanislav.nijnikov@wdc.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Stanislav Nijnikov 提交于
This patch introduces a sysfs group entry for the UFS health descriptor parameters. The group adds "health_descriptor" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown as hexadecimal numbers. The full information about the parameters could be found at UFS specifications 2.1. Signed-off-by: NStanislav Nijnikov <stanislav.nijnikov@wdc.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Stanislav Nijnikov 提交于
This patch introduces a sysfs group entry for the UFS geometry descriptor parameters. The group adds "geometry_descriptor" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown as hexadecimal numbers. The full information about the parameters could be found at UFS specifications 2.1. Signed-off-by: NStanislav Nijnikov <stanislav.nijnikov@wdc.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Stanislav Nijnikov 提交于
This patch introduces a sysfs group entry for the UFS interconnect descriptor parameters. The group adds "interconnect_descriptor" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown as hexadecimal numbers. The full information about the parameters could be found at UFS specifications 2.1. Signed-off-by: NStanislav Nijnikov <stanislav.nijnikov@wdc.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Stanislav Nijnikov 提交于
This patch introduces a sysfs group entry for the UFS device descriptor parameters. The group adds "device_descriptor" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown as hexadecimal numbers. The full information about the parameters could be found at UFS specifications 2.1. Signed-off-by: NStanislav Nijnikov <stanislav.nijnikov@wdc.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Stanislav Nijnikov 提交于
This patch introduces attribute group to show existing sysfs entries. Signed-off-by: NStanislav Nijnikov <stanislav.nijnikov@wdc.com> Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 31 1月, 2018 1 次提交
-
-
由 Sujit Reddy Thumma 提交于
WRITE_SAME command is not supported by UFS. Enable a quirk for the upper level drivers to not send WRITE SAME command. [mkp: botched patch, applied by hand] Signed-off-by: NSujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NAsutosh Das <asutoshd@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 05 12月, 2017 1 次提交
-
-
由 kwmad.kim@samsung.com 提交于
These would be used in the future in some specific drivers. Signed-off-by: NKiwoong Kim <kwmad.kim@samsung.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 22 11月, 2017 1 次提交
-
-
由 Gustavo A. R. Silva 提交于
_vreg_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _vreg_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: aa497613 ("ufs: Add regulator enable support") Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 02 11月, 2017 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org> Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 23 10月, 2017 2 次提交
-
-
由 Vivek Gautam 提交于
Refactor ufs_qcom_power_up_sequence() to get rid of ugly exported phy APIs and use the phy_init() and phy_power_on() to do the phy initialization. Signed-off-by: NVivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Vivek Gautam 提交于
Set the phy mode based on the UFS HS PA mode. This lets the controller let phy know the mode in which the PHY Adapter is running and set the phy rates accordingly. Signed-off-by: NVivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
- 12 10月, 2017 4 次提交
-
-
由 Alim Akhtar 提交于
Since we have converted all the user of UFS_BIT() macro with the actual bit position, let remove unused UFS_BIT()macro. Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com> Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Alim Akhtar 提交于
HOST_ERROR_INDICATOR and DEVICE_ERROR_INDICATOR are not used anywhere. Also as per JESD223C specification, bit[7:4] are reserved. Lets remove these #defines. Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com> Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Alim Akhtar 提交于
Use actual bit position instead of UFS_BIT() macro. This patch also changes bit-17 to meaningful #define. This change is as per discussion here [1] [1] -> https://lkml.org/lkml/2017/8/28/786Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com> Cc: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Alim Akhtar 提交于
Currently UFS HCI uses UFS_BIT() macro to get various bit position for the hardware registers status bits. Which makes code longer instead of shorter. This macro does not improve code readability as well. Lets re-write these macro definition with the actual bit position. Suggested-by: NBart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com> Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 28 9月, 2017 4 次提交
-
-
由 kehuanlin 提交于
Since the command type of UTRD in UFS 2.1 specification is the same with UFS 2.0. And it assumes the future UFS specification will follow the same definition. Signed-off-by: Nkehuanlin <kehuanlin@pinecone.net> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Huanlin Ke 提交于
Several configurable fields of the Device Descriptor and the Unit Descriptors determine the Boot LUN status. The bBootEnable field and the bBootLunEn attribute is set to zero by default, so the Boot LUN is disabled by default. At which point the scsi device add for Boot LUN will fail, but we can continue to use the ufs device in fact. This failure shouldn't abort the device boot. Signed-off-by: NHuanlin Ke <kehuanlin@pinecone.net> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Zang Leigang 提交于
Signed-off-by: NZang Leigang <zangleigang@hisilicon.com> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Zang Leigang 提交于
Signed-off-by: NZang Leigang <zangleigang@hisilicon.com> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 16 9月, 2017 1 次提交
-
-
由 Colin Ian King 提交于
Don't populate const arrays on the stack, instead make them static. Makes the object code smaller by over 740 bytes. Before: text data bss dec hex filename 3840 208 0 4048 fd0 drivers/scsi/ufs/tc-dwc-g210.o After: text data bss dec hex filename 2679 624 0 3303 ce7 drivers/scsi/ufs/tc-dwc-g210.o Signed-off-by: NColin Ian King <colin.king@canonical.com> Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 25 8月, 2017 1 次提交
-
-
由 Zang Leigang 提交于
Signed-off-by: NZang Leigang <zangleigang@hisilicon.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 02 7月, 2017 1 次提交
-
-
由 Zang Leigang 提交于
Forget a condition: eh_work scheduled but do not start to work. Signed-off-by: NZang Leigang <zangleigang@hisilicon.com> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 13 6月, 2017 3 次提交
-
-
由 Adrian Hunter 提交于
Add PCI id and variant ops for Intel CNL UFS host controller. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Adrian Hunter 提交于
Put PM functions under correct config options and use standard PM macros to set callbacks. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Szymon Mielczarek 提交于
Move the initialization of clocks list head to ufshcd_alloc_host() so that every driver doesn't have to do it. Remove checks for the list head being NULL because that is not possible. Signed-off-by: NSzymon Mielczarek <szymonx.mielczarek@intel.com> Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 19 5月, 2017 1 次提交
-
-
由 Michał Potomski 提交于
When reloading module these two attributes aren't cleaned up properly and they persist causing warnings when trying to load module again. Additionally they are not recreated properly due to that. Signed-off-by: NMichał Potomski <michalx.potomski@intel.com> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 27 4月, 2017 2 次提交
-
-
由 Tomohiro Kusumi 提交于
It could be just cmp 0xe instead of >>1 and cmp 0x7, with readable code. Signed-off-by: NTomohiro Kusumi <tkusumi@tuxera.com> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Tomohiro Kusumi 提交于
MASK_EE_STATUS added by 66ec6d59 was unused, but it seems to have been defined to do this. Signed-off-by: NTomohiro Kusumi <tkusumi@tuxera.com> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 30 3月, 2017 2 次提交
-
-
由 Szymon Mielczarek 提交于
This reverts commit 61e07359. The patch introduced redundant query retries as we already had such mechanism provided with _retry functions. Both ufshcd_read_desc and ufshcd_read_unit_desc_param functions call ufshcd_query_descriptor_retry wrapper. Signed-off-by: NSzymon Mielczarek <szymonx.mielczarek@intel.com> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Tomohiro Kusumi 提交于
Not much reason to use ARRAY_SIZE() when we know it's for a C string. Signed-off-by: NTomohiro Kusumi <tkusumi@tuxera.com> Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-