The debugfs dentries are only used for CONFIG_BLK_DEBUG_FS, so make them
conditional on that instead of CONFIG_DEBUG_FS.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

We don't always have easy access to the dentry of a file or directory we
created in debugfs. Add a helper which allows us to get a dentry we
previously created.

The motivation for this change is a problem with blktrace and the blk-mq
debugfs entries introduced in 07e4fead ("blk-mq: create debugfs
directory tree"). Namely, in some cases, the directory that blktrace
needs to create may already exist, but in other cases, it may not. We
_could_ rely on a bunch of implied knowledge to decide whether to create
the directory or not, but it's much cleaner on our end to just look it
up.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

Warnings of the following form occur because scsi reuses a devt number
while the block layer still has it referenced as the name of the bdi
[1]:

 WARNING: CPU: 1 PID: 93 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80
 sysfs: cannot create duplicate filename '/devices/virtual/bdi/8:192'
 [..]
 Call Trace:
  dump_stack+0x86/0xc3
  __warn+0xcb/0xf0
  warn_slowpath_fmt+0x5f/0x80
  ? kernfs_path_from_node+0x4f/0x60
  sysfs_warn_dup+0x62/0x80
  sysfs_create_dir_ns+0x77/0x90
  kobject_add_internal+0xb2/0x350
  kobject_add+0x75/0xd0
  device_add+0x15a/0x650
  device_create_groups_vargs+0xe0/0xf0
  device_create_vargs+0x1c/0x20
  bdi_register+0x90/0x240
  ? lockdep_init_map+0x57/0x200
  bdi_register_owner+0x36/0x60
  device_add_disk+0x1bb/0x4e0
  ? __pm_runtime_use_autosuspend+0x5c/0x70
  sd_probe_async+0x10d/0x1c0
  async_run_entry_fn+0x39/0x170

This is a brute-force fix to pass the devt release information from
sd_probe() to the locations where we register the bdi,
device_add_disk(), and unregister the bdi, blk_cleanup_queue().

Thanks to Omar for the quick reproducer script [2]. This patch survives
where an unmodified kernel fails in a few seconds.

[1]: https://marc.info/?l=linux-scsi&m=147116857810716&w=4
[2]: http://marc.info/?l=linux-block&m=148554717109098&w=2

Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Reported-by: NOmar Sandoval <osandov@osandov.com>
Tested-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

blk_get_backing_dev_info() is now a simple dereference. Remove that
function and simplify some code around that.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currenly blk_get_backing_dev_info() is not safe to be called when the
block device is not open as bdev->bd_disk is NULL in that case. However
inode_to_bdi() uses this function and may be call called from flusher
worker or other writeback related functions without bdev being open
which leads to crashes such as:

[113031.075540] Unable to handle kernel paging request for data at address 0x00000000
[113031.075614] Faulting instruction address: 0xc0000000003692e0
0:mon> t
[c0000000fb65f900] c00000000036cb6c writeback_sb_inodes+0x30c/0x590
[c0000000fb65fa10] c00000000036ced4 __writeback_inodes_wb+0xe4/0x150
[c0000000fb65fa70] c00000000036d33c wb_writeback+0x30c/0x450
[c0000000fb65fb40] c00000000036e198 wb_workfn+0x268/0x580
[c0000000fb65fc50] c0000000000f3470 process_one_work+0x1e0/0x590
[c0000000fb65fce0] c0000000000f38c8 worker_thread+0xa8/0x660
[c0000000fb65fd80] c0000000000fc4b0 kthread+0x110/0x130
[c0000000fb65fe30] c0000000000098f0 ret_from_kernel_thread+0x5c/0x6c
Signed-off-by: NJens Axboe <axboe@fb.com>

Instead of storing backing_dev_info inside struct request_queue,
allocate it dynamically, reference count it, and free it when the last
reference is dropped. Currently only request_queue holds the reference
but in the following patch we add other users referencing
backing_dev_info.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

We will want to have struct backing_dev_info allocated separately from
struct request_queue. As the first step add pointer to backing_dev_info
to request_queue and convert all users touching it. No functional
changes in this patch.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, block device inodes stay around after corresponding gendisk
hash died until memory reclaim finds them and frees them. Since we will
make block device inode pin the bdi, we want to free the block device
inode as soon as the device goes away so that bdi does not stay around
unnecessarily. Furthermore we need to avoid issues when new device with
the same major,minor pair gets created since reusing the bdi structure
would be rather difficult in this case.

Unhashing block device inode on gendisk destruction nicely deals with
these problems. Once last block device inode reference is dropped (which
may be directly in del_gendisk()), the inode gets evicted. Furthermore if
the major,minor pair gets reallocated, we are guaranteed to get new
block device inode even if old block device inode is not yet evicted and
thus we avoid issues with possible reuse of bdi.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

To prepare for dynamically adding new nbd devices to the system switch
from using an array for the nbd devices and instead use an idr.  This
copies what loop does for keeping track of its devices.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Since we are in the memory reclaim path we need our recv work to be on a
workqueue that has WQ_MEM_RECLAIM set so we can avoid deadlocks.  Also
set WQ_HIGHPRI since we are in the completion path for IO.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Replace the two debugfs_create_file() loops by a call to the new
debugfs_create_files() function. Add an empty element at the end
of the two attribute arrays such that the array size does not have
to be passed to debugfs_create_files().
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Allow users to interrupt show operations instead of making a user
space process unkillable if ownership of q->sysfs_lock cannot be
obtained.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Avoid that sparse reports the following complaints:

block/elevator.c:541:29: warning: incorrect type in assignment (different base types)
block/elevator.c:541:29:    expected bool [unsigned] [usertype] next_sorted
block/elevator.c:541:29:    got restricted req_flags_t

block/blk-mq-debugfs.c:92:54: warning: cast from restricted req_flags_t
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This patch avoids that sparse complains about lock imbalances.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Since we removed cmd_type, we now have a hole in the struct. Move
the internal_tag member to the same cacheline as tag, since we
use them at the same time.

This doesn't fix the hole, just moves it elsewhere.
Signed-off-by: NJens Axboe <axboe@fb.com>

Instead of keeping two levels of indirection for requests types, fold it
all into the operations.  The little caveat here is that previously
cmd_type only applied to struct request, while the request and bio op
fields were set to plain REQ_OP_READ/WRITE even for passthrough
operations.

Instead this patch adds new REQ_OP_* for SCSI passthrough and driver
private requests, althought it has to add two for each so that we
can communicate the data in/out nature of the request.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently the legacy ide driver defines several request types of it's own,
which is in the way of removing that field entirely.

Instead add a type field to struct ide_request and use that to distinguish
the different types of IDE-internal requests.

It's a bit of a mess, but so is the surrounding code..
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJens Axboe <axboe@fb.com>

This can be used to check for fs vs non-fs requests and basically
removes all knowledge of BLOCK_PC specific from the block layer,
as well as preparing for removing the cmd_type field in struct request.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

This is where we do the rest of the request handling, which will
become much simpler soon, too.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Disconnects don't use block layer requests these days, so all handling
of private requests is dead code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

This driver will never see non-fs requests, and doesn't do anything
else in the prep_fn.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

This driver will never see non-fs requests, and doesn't do anything
else in the prep_fn.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

The block layer won't send requests the driver isn't asking for,
so remove this check.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

->done can only be called for fs requests, so no need to check again here.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

The SCSI passthrough idea was a a bad idea to start with (guess who came
up with it?), and has been removed from the virtio 1.O spec, and is not
enabled by defauly by any host I know of.  Add a separate config option
for it so that we don't need to enable it for most setups.  That way
any bugs related to it (like the one recently fixed for vmapped stacks)
do not affect other users, and the size of the virtblk_req structure
also shrinks significantly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

We can simply use blk_mq_rq_from_pdu to get back at the request at
I/O completion time.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

We only need this code to support scsi, ide, cciss and virtio.  And at
least for virtio it's a deprecated feature to start with.

This should shrink the kernel size for embedded device that only use,
say eMMC a bit.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

This way there is no need to drag in a dependency on the
BLOCK_PC code, which is going to become optional.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

The NVMe SCSI emulation doesn't use BLOCK_PC requests, so BLK_MAX_CDB
doesn't have a meaning for it.  Instead opencode the value of 16
and refactor the code a bit so that related checks are next to each
other and we only need to use the value in one place.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Since we moved the cdb parts and define out of the block proper,
we need to include scsi/scsi_request.h for the nvme scsi layer.

Fixes: 82ed4db4 ("block: split scsi_request out of struct request")
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NJens Axboe <axboe@fb.com>

These days we have the proper flags set since request allocation time.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

And require all drivers that want to support BLOCK_PC to allocate it
as the first thing of their private data.  To support this the legacy
IDE and BSG code is switched to set cmd_size on their queues to let
the block layer allocate the additional space.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Simply the boilerplate code needed for bsg nodes a bit.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Rely on the new block layer functionality to allocate additional driver
specific data behind struct request instead of implementing it in SCSI
itѕelf.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Instead do an internal export of __scsi_init_queue for the transport
classes that export BSG nodes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

There is no need for GFP_DMA allocations of the scsi_cmnd structures
themselves, all that might be DMAed to or from is the actual payload,
or the sense buffers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently blk-mq always allocates the sense buffer using normal GFP_KERNEL
allocation.  Refactor the cmd pool code to split the cmd and sense allocation
and share the code to allocate the sense buffers as well as the sense buffer
slab caches between the legacy and blk-mq path.

Note that this switches to lazy allocation of the sense slab caches - the
slab caches (not the actual allocations) won't be destroy until the scsi
module is unloaded instead of keeping track of hosts using them.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

When using the slab allocator we already decide at cache creation time if
an allocation comes from a GFP_DMA pool using the SLAB_CACHE_DMA flag,
and there is no point passing the kmalloc-family only GFP_DMA flag to
kmem_cache_alloc.  Drop all the infrastructure for doing so.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Switch to scsi_execute_req_flags() instead of using the block interface
directly.  This will set REQ_QUIET and REQ_PREEMPT, but this is okay as
we're evaluating the errors anyway and should be able to send the command
even if the device is quiesced.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@fb.com>