mainline inclusion
from mainline-v5.13-rc1
commit 3b4c747c
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I42E7E
CVE: NA

---------------------------

Some I2C drivers like Designware and HiSilicon will print the
bus frequency mode information, so add a public one that everyone
can make use of.

Add the definition of the I2C Frequency Modes macro.
Tested-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NYicong Yang <yangyicong@hisilicon.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Reviewed-by: Sheng Feng < fengsheng5@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 07740c92
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I42E7E
CVE: NA

---------------------------

Some I2C controller drivers will only unregister the I2C
adapter in their .remove() callback, which can be done
by simply using a managed variant to add the I2C adapter.

So add the managed functions for adding the I2C adapter.
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NDmitry Osipenko <digetx@gmail.com>
Signed-off-by: NYicong Yang <yangyicong@hisilicon.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>
Conflicts:
	drivers/i2c/i2c-core-base.c
	include/linux/i2c.h
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Reviewed-by: Sheng Feng < fengsheng5@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

stable inclusion
from linux-4.19.198
commit 7c0bb53d48244b10782deea07d57e0a4c0fb4262

--------------------------------

[ Upstream commit b64210f2 ]

If an i2c client receives an interrupt during reboot or shutdown it may
be too late to service it by making an i2c transaction on the bus
because the i2c controller has already been shutdown. This can lead to
system hangs if the i2c controller tries to make a transfer that is
doomed to fail because the access to the i2c pins is already shut down,
or an iommu translation has been torn down so i2c controller register
access doesn't work.

Let's simply disable the irq if there isn't a shutdown callback for an
i2c client when there is an irq associated with the device. This will
make sure that irqs don't come in later than the time that we can handle
it. We don't do this if the i2c client device already has a shutdown
callback because presumably they're doing the right thing and quieting
the device so irqs don't come in after the shutdown callback returns.
Reported-by: Nkernel test robot <lkp@intel.com>
[swboyd@chromium.org: Dropped newline, added commit text, added
interrupt.h for robot build error]
Signed-off-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

commit e409a6a3 upstream.

In some configurations, recovery is optional. So, don't throw an error
when it is not used because e.g. pinctrl settings for recovery are not
provided. Reword the message and make it debug output.
Reported-by: NKlaus Kudielka <klaus.kudielka@gmail.com>
Tested-by: NKlaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>
Cc: stable@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

[ Upstream commit 21653a41 ]

Some ACPI i2c-devices _STA method (which is used to detect if the device
is present) use autodetection code which probes which device is present
over i2c. This requires the I2C ACPI OpRegion handler to be registered
before we enumerate i2c-clients under the i2c-adapter.

This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and
ThinkBook 15 IIL not getting an i2c-client instantiated and thus not
working.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1842039Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

commit cf8ce8b8 upstream.

The I2C specification states that tsu:sto for standard mode timing must
be at minimum 4us. Pictographically, this is:

SCL: ____/~~~~~~~~~
SDA: _________/~~~~
       ->|    |<- 4us minimum

We are currently waiting 2.5us between asserting SCL and SDA, which is
in violation of the standard. Adjust the timings to ensure that we meet
what is stipulated as the minimum timings to ensure that all devices
correctly interpret the STOP bus transition.

This is more important than trying to generate a square wave with even
duty cycle.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

commit cf676908846a06443fa5e6724ca3f5dd7460eca1 upstream.

I'm not sure what made gcc warn about this code now.  The 'ret' variable
does end up initialized in all cases, but it's definitely not obvious,
so the compiler is quite reasonable to warn about this.

So just add initialization to make it all much more obvious both to
compilers and to humans.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

commit 72bfcee1 upstream.

Multiple users have reported their Synaptics touchpad has stopped
working between v4.20.1 and v4.20.2 when using SMBus interface.

The culprit for this appeared to be commit c5eb1190 ("PCI / PM: Allow
runtime PM without callback functions") that fixed the runtime PM for
i2c-i801 SMBus adapter. Those Synaptics touchpad are using i2c-i801
for SMBus communication and testing showed they are able to get back
working by preventing the runtime suspend of adapter.

Normally when i2c-i801 SMBus adapter transmits with the client it resumes
before operation and autosuspends after.

However, if client requires SMBus Host Notify protocol, what those
Synaptics touchpads do, then the host adapter must not go to runtime
suspend since then it cannot process incoming SMBus Host Notify commands
the client may send.

Fix this by keeping I2C/SMBus adapter active in case client requires
Host Notify.
Reported-by: NKeijo Vaara <ferdasyn@rocketmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203297
Fixes: c5eb1190 ("PCI / PM: Allow runtime PM without callback functions")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: NKeijo Vaara <ferdasyn@rocketmail.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

commit 93b6604c5a669d84e45fe5129294875bf82eb1ff upstream.

A previous change allowed I2C client devices to discover new IRQs upon
reprobe by clearing the IRQ in i2c_device_remove. However, if an IRQ was
assigned in i2c_new_device, that information is lost.

For example, the touchscreen and trackpad devices on a Dell Inspiron laptop
are I2C devices whose IRQs are defined by ACPI extended IRQ types. The
client device structures are initialized during an ACPI walk. After
removing the i2c_hid device, modprobe fails.

This change caches the initial IRQ value in i2c_new_device and then resets
the client device IRQ to the initial value in i2c_device_remove.

Fixes: 6f108dd70d30 ("i2c: Clear client->irq in i2c_device_remove")
Signed-off-by: NJim Broadus <jbroadus@gmail.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
[wsa: this is an easy to backport fix for the regression. We will
refactor the code to handle irq assignments better in general.]
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

commit 6f108dd7 upstream.

The IRQ will be mapped in i2c_device_probe only if client->irq is zero and
i2c_device_remove does not clear this. When rebinding an I2C device,
whos IRQ provider has also been rebound this means that an IRQ mapping
will never be created, causing the I2C device to fail to acquire its
IRQ. Fix this issue by clearing client->irq in i2c_device_remove,
forcing i2c_device_probe to lookup the mapping again.
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

commit b9bb3fdf upstream.

irq_create_mapping calls irq_find_mapping internally and will use the
found mapping if one exists, so there is no need to manually call this
from i2c_smbus_host_notify_to_irq.
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

This function was renamed in commit 82fe39a6 ("i2c: refactor
function to release a DMA safe buffer") but this kernel doc wasn't
updated to point at the new function. Rename it.

Fixes: 82fe39a6 ("i2c: refactor function to release a DMA safe buffer")
Signed-off-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

a) rename to 'put' instead of 'release' to match 'get' when obtaining
   the buffer
b) change the argument order to have the buffer as first argument
c) add a new argument telling the function if the message was
   transferred. This allows the function to be used also in cases
   where setting up DMA failed, so the buffer needs to be freed without
   syncing to the message buffer.

Also convert the only user.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

There aren't any users left. Remove this callback from the 2.4 times.
Phew, finally, that took years to reach...
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

There are two drivers already using the SDA hold time setting.
It might be more in the future, thus, make I2C core to parse the setting
for us if provided by firmware.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: NLudovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Some adapters do not support a message length of 0. Add this as a quirk
so drivers don't have to open code it.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

If an i2c topology has instances of nested muxes, then a lockdep splat
is produced when when i2c_parent_lock_bus() is called.  Here is an
example:

  ============================================
  WARNING: possible recursive locking detected
  --------------------------------------------
  insmod/68159 is trying to acquire lock:
    (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux]

  but task is already holding lock:
    (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux]

  other info that might help us debug this:
    Possible unsafe locking scenario:

          CPU0
          ----
     lock(i2c_register_adapter#2);
     lock(i2c_register_adapter#2);

    *** DEADLOCK ***

    May be due to missing lock nesting notation

  1 lock held by insmod/68159:
    #0:  (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux]

  stack backtrace:
  CPU: 13 PID: 68159 Comm: insmod Tainted: G           O
  Call Trace:
    dump_stack+0x67/0x98
    __lock_acquire+0x162e/0x1780
    lock_acquire+0xba/0x200
    rt_mutex_lock+0x44/0x60
    i2c_parent_lock_bus+0x32/0x50 [i2c_mux]
    i2c_parent_lock_bus+0x3e/0x50 [i2c_mux]
    i2c_smbus_xfer+0xf0/0x700
    i2c_smbus_read_byte+0x42/0x70
    my2c_init+0xa2/0x1000 [my2c]
    do_one_initcall+0x51/0x192
    do_init_module+0x62/0x216
    load_module+0x20f9/0x2b50
    SYSC_init_module+0x19a/0x1c0
    SyS_init_module+0xe/0x10
    do_syscall_64+0x6c/0x1a0
    entry_SYSCALL_64_after_hwframe+0x42/0xb7
Reported-by: NJohn Sperbeck <jsperbeck@google.com>
Tested-by: NJohn Sperbeck <jsperbeck@google.com>
Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Deepa Dinamani <deepadinamani@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Chang <dpf@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Link: http://lkml.kernel.org/r/20180720083914.1950-3-peda@axentia.seSigned-off-by: NIngo Molnar <mingo@kernel.org>

When we initialize the pins, make sure it looks like STOP by dividing
the delay into halves. It shouldn't matter because SDA is expected to be
held low by a device, but for super-safety, let's do it.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

While refactoring the routine before, it occurred to me that this will
make the code much easier to understand.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Some IP cores have an internal 'bus free' logic which may be more
advanced than just checking if SDA is high. Add a separate callback to
get this status. Filling it is optional.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

After exiting the while loop, we checked if recovery was successful and
sent a STOP to the clients. Meanwhile however, we send a STOP after
every pulse, so it is not needed after the loop. If we move the check
for a free bus to the end of the while loop, we can shorten and simplify
the logic. It is still ensured that at least one STOP will be sent to
the wire even if SDA was not stuck low.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

For bus recovery, we either need to bail out early if we can read SDA or
we need to send STOP after every pulse. Otherwise recovery might be
misinterpreted as an unwanted write. So, require one of those SDA
handling functions to avoid this problem.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

I2C clients may misunderstand recovery pulses if they can't read SDA to
bail out early. In the worst case, as a write operation. To avoid that
and if we can write SDA, try to send STOP to avoid the
misinterpretation.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

Currently, of_i2c_register_devices() is responsible for retaining
info->of_node, but we're about to expose a function to parse I2C board
info without registering the I2C device.

We could possibly let this function retain ->of_node, but this approach
is prone to reference leak since people will have to remember to call
of_node_put() if something goes wrong between the OF node parsing and
the registration step.
Let's just retain the ->of_node in i2c_new_register() instead.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The only user of i2c_board_info->archdata is the OF parsing code and it
just pass a zero-initialized object which has the same effect as leaving
->archdata to NULL since the client object is allocated with kzalloc().

Get rid of this useless field.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The limitation of being able to check only for -EPROBE_DEFER from
dev_pm_domain_attach() has been removed. Hence let's respect all error
codes and bail out accordingly.
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The API docs describe i2c_transfer() as taking a pointer to an array
of i2c_msg containing at least 1 entry, but leaves it to the individual
drivers to sanity check the msgs and num parameters. Let's do this in
core code instead.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
[wsa: changed '<= 0' to '< 1']
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

No changes in refcount semantics -- key init is false; replace

static_key_slow_inc|dec   with   static_branch_inc|dec
static_key_false          with   static_branch_unlikely

Added a '_key' suffix to i2c_trace_msg, for better self
documentation.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Reviewed-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

According to the event i2c_result defined in include/trace/events/i2c.h,
the second parameter should be the number of messages instead of the
ended loop index. The value of ended loop index is the same as ret.
Signed-off-by: NAhbong Chang <cwahbong@google.com>
Reviewed-by: NTodd Poynor <toddpoynor@google.com>
Reviewed-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

After previous refactoring, there is only one user in the same file
left. Make the function static now.

[wsa: added 'int' to bare 'unsigned']
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Can be used during probe to double check that the probed device is
what is expected.

Loosely based on code from Adrian Fiergolski <adrian.fiergolski@cern.ch>.
Tested-by: NAdrian Fiergolski <adrian.fiergolski@cern.ch>
Reviewed-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NPeter Rosin <peda@axentia.se>

The buses should honor the firmware interface used to register the device,
but the I2C core reports a MODALIAS of the form i2c:<device> even for I2C
devices registered via OF.

This means that user-space will never get an OF stype uevent MODALIAS even
when the drivers modules contain aliases exported from both the I2C and OF
device ID tables. For example, an Atmel maXTouch Touchscreen registered by
a DT node with compatible "atmel,maxtouch" has the following module alias:

$ cat /sys/class/i2c-adapter/i2c-8/8-004b/modalias
i2c:maxtouch

So udev won't be able to auto-load a module for an OF-only device driver.
Many OF-only drivers duplicate the OF device ID table entries in an I2C ID
table only has a workaround for how the I2C core reports the module alias.

This patch changes the I2C core to report an OF related MODALIAS uevent if
the device was registered via OF. So for the previous example, after this
patch, the reported MODALIAS for the Atmel maXTouch will be the following:

$ cat /sys/class/i2c-adapter/i2c-8/8-004b/modalias
of:NtrackpadT<NULL>Catmel,maxtouch

NOTE: This patch may break out-of-tree drivers that were relying on this
      behavior, and only had an I2C device ID table even when the device
      was registered via OF. There are no remaining drivers in mainline
      that do this, but out-of-tree drivers have to be fixed and define
      a proper OF device ID table to have module auto-loading working.
Signed-off-by: NJavier Martinez Canillas <javierm@redhat.com>
Tested-by: NDmitry Mastykin <mastichi@gmail.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Reference count of device node was increased in of_i2c_register_device,
but without decreasing it in i2c_unregister_device. Then the added
device node will never be released. Fix this by adding the of_node_put.
Signed-off-by: NLixin Wang <alan.1.wang@nokia-sbell.com>
Tested-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

If we managed to get a client release SDA again, send a STOP afterwards
to make sure we have a consistent state on the bus again.
Tested-by: NPhil Reid <preid@electromag.com.au>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

If we have a function to control SDA, we should ensure that SDA is not
held down by us. So, release the GPIO in this case.
Tested-by: NPhil Reid <preid@electromag.com.au>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This will be needed when we want to create STOP conditions, too, later.
Create the needed fields and populate them for the GPIO case if the GPIO
is set to output.
Tested-by: NPhil Reid <preid@electromag.com.au>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Those two functions are very similar, the only differences are that one
needs the I2C_M_RD flag for its message while the other one needs the
buffer casted to drop the const. Introduce a generic helper which allows
to specify the flags (also needed later for DMA safe variants of these
calls) and let the casting be done in the inlining functions which are
now calling the new helper function.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

One helper checks if DMA is suitable and optionally creates a bounce
buffer, if not. The other function returns the bounce buffer and makes
sure the data is properly copied back to the message.
Reviewed-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The correct header to include for the gpiod interface is
<linux/gpio/consumer.h>.

Fixes: 3991c5c8 ("i2c: Switch to using gpiod interface for gpio bus recovery")
Signed-off-by: NPhil Reid <preid@electromag.com.au>
Reviewed-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Remove all reference to code related to using integer based ids for
scl/sda gpio for bus recovery. All in tree drivers are now using the
gpio descriptors to specific the required gpios.
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NPhil Reid <preid@electromag.com.au>
Reviewed-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>