The use of current_norm can be dropped. The g_std ioctl was already
implemented, so current_norm didn't do anything useful anyway.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Replace g_chip_ident by g_chip_info. Note that the IR support is implemented
as a subdev, so this part no longer needs to be handled as a 'bridge' chip.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This ioctl is defined as IOW, so pass the argument by value instead of by
reference. I could have chosen to add const instead, but this is 1) easier
to handle in drivers and 2) consistent with the s_std subdev operation.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This ioctl is defined as IOW, so pass the argument as const.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NAlexey Klimov <klimov.linux@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This ioctl is defined as IOW, so pass the argument as const.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This kind of memcpy() is error-prone. Its replacement with a struct
assignment is prefered because it's type-safe and much easier to read.
Found by coccinelle. Hand patched and reviewed.
Tested by compilation only.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier struct_name;
struct struct_name to;
struct struct_name from;
expression E;
@@
-memcpy(&(to), &(from), E);
+to = from;
// </smpl>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NEzequiel Garcia <elezegarcia@gmail.com>
Reviewed-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch provide only analog support.
The device is based on AF9013 demodulator, XC3028 tuner
and CX23885 chipset; subsystem id: 1461:d939
Signed-off-by: NOleh Kravchenko <oleg@kaa.org.ua>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Convert drivers using wall clock time (CLOCK_REALTIME) to timestamp from the
monotonic timer (CLOCK_MONOTONIC).
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Adds audio support for input YPbPr, AV and S-Video on Mygica X8507 card.

Remains to be done: IR, FM and ISDBT
Signed-off-by: NAlfredo J. Delaiti <alfredodelaiti@netscape.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Write-only ioctls should have a const argument in the ioctl op.
Do this conversion for vidioc_s_audio.
Adding const for write-only ioctls was decided during the 2012 Media Workshop.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Rename all PCI drivers with their own directory under
drivers/media/video into drivers/media/pci and update the
building system.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Get the HVR-1255 analog support working for all supported inputs.  This
includes introduction of a new board profile for an OEM variant which
doesn't have all the same inputs as the retail version of the board.

Validated with the following boards:

HVR-1255 (0070:2259)

Thanks to Steven Toth and Hauppauge for	loaning	me various boards to
regression test	with.

Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: NDevin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The analog support in the cx23885 driver was completely broken for the
HVR-1250.  Add the necessary code.

Note that this only implements analog for the composite and s-video
inputs. The tuner input continues to be non-functional due to a lack of
analog support in the mt2131 driver.

Validated with the following boards:

HVR-1250 (0070:7911)

Thanks to Steven Toth and Hauppauge for	loaning	me various boards to
regression test	with.

Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: NDevin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The error handling in the original code wasn't complete so static
checkers complained about a potential NULL deference.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We can pass a NO_SIGNAL video decoder state back to applications
if it's available.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The card names are being truncated in the video4linux sys class name file.
Prior to this patch they were shown as:
cx23885[0] mpeg (Hauppauge WinT
cx23885[0] video (Hauppauge WinT
cx23885[0] vbi (Hauppauge WinT

After this patch they are shown as:
Hauppauge WinTV-HVR1850 (video)
Hauppauge WinTV-HVR1850 (mpeg)
Hauppauge WinTV-HVR1850 (vbi)
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

First in a series of patches that adds support to the cx23885 driver
for CX23888 analog video handling. Raw and MPEG video support is
being added for the HVR1850 driver in the patch, and the following
series of patches.

Some basic cx23885 driver cleanup. Partly to add HVR1850 support
and partly to allow -417.c V4L2 calls to be routed through thr
driver core and handled in a single place.

Make a number of core driver functions available to the -417.c
driver to streamline the driver.

Add the analog tuner ops definition so we can reach/tune the
hardware when we need to. Added the tff field so 888 based cards
(which have a weird field ordering issue) can be accomodated
and worked around in the driver.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Since the conversion to subdev in Oct 2010 the audio controls have
not functioned correctly in the cx23885 driver. Passing values of
0-3f did not translate into meaningfull register writes. I've
converted the cx23885 driver to match the cx25840 volume control
definition and now audio is working reliably again.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch supports card Mygica X8507 (analog part)

This controller is a copy of driver card Mygica X8506

This patch depends on patch cx23885-alsa

To do: FM, ISDB-t, remote control, audio for composite1, S-Video and
video component.
Signed-off-by: NAlfredo J. Delaiti <alfredodelaiti@netscape.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Safety reasons. We shouldn't be trying to reconfigure a risc
processor instruction queue unless it's stopped.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Previous driver over-reported errors and stopped the video fifo
(causing video to stop) if 1) A risc error occured 2) The risc processor
detected that it has missing lines in the video frame 3) The risc fifo
is about to overflow.

The previous driver reported all three of these cases as risc errors
when this is technically not correct. So, the function was cleaned up.

1. Ensure that risc opcode related errors are correctly shown as such,
   and not overly reported for non-risc-opcode cases.
2. Ensure that line sync and overflow errors are not reported as opcode errors.
3. Ensure that only the risc-op-code case can stop the fifo and dump channel
   / risc processor information.

The net result is that if video becomes unstable, cable disconnect, this will
not trigger a stop of the video firmware (due to missing lines errors).
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

1. Removed the verbose 'dump channel state to console', very noisy in
   weak signal conditions.
2. No need for the video buffer timeout to stop the risc engine here.
   Clearer and easier to maintain if start_video_dma() is the single
   place that this is done.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Unused function removed.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Inform applications that multiple audio inputs are available on
non-tv inputs.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Ensure audio is established at driver start.
Ensure the correct defaults are established for the audio path if
the cards struct has nothing defined.
Allow the caller to select one of the two baseband input paths.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add code to program the flatiron internal i2c ADC and pass the
appropriate audio mux enums to the cx25840 driver.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Coding style and printk's are cleaned up in subsequent patches
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

vidioc_g_tuner should not do any memset for the parameters. Core
already does that. In particular, V4L2 core now does some handling
for the tuner type, and the tuner-core module relies on that.

So, doing any memset there is a very bad idea.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMijhail Moreyra <mijhail.moreyra@gmail.com>
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMijhail Moreyra <mijhail.moreyra@gmail.com>
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

All the modified drivers didn't have any version increment since
Jan, 1 2011. Several of them didn't have any version increment
for a long time, even having new features and important bug fixes
happening.

As we're now filling the QUERYCAP version with the current Kernel
Release, we don't need to maintain a per-driver version control
anymore. So, let's just use the default.

In order to preserve the Kernel module version history, a
KERNEL_VERSION() macro were added to all modified drivers, and
the extraver number were incremented.

I opted to preserve the per-driver version control to a few
pwc, pvrusb2, s2255, s5p-fimc and sh_vou.

A few drivers are still using the legacy way to handle ioctl's.
So, we can't do such change on them, otherwise, they'll break.
Those are: uvc, et61x251 and sn9c102.

The rationale is that the per-driver version control seems to be
actively maintained on those.

Yet, I think that the better for them would be to just use the
default version numbering, instead of doing that by themselves.

While here, removed a few uneeded include linux/version.h
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>