diff --git a/drivers/staging/wlags49_h2/hcfdef.h b/drivers/staging/wlags49_h2/hcfdef.h index cb1966d8473fb27fa98b5c90336c9311d44dc2de..0261c7358c1c9715b89f6071b5d9355e4616a8ec 100644 --- a/drivers/staging/wlags49_h2/hcfdef.h +++ b/drivers/staging/wlags49_h2/hcfdef.h @@ -1,286 +1,249 @@ - -// vim:tw=110:ts=4: #ifndef HCFDEFC_H #define HCFDEFC_H 1 /************************************************************************************************* -* -* FILE : HCFDEF.H -* -* DATE : $Date: 2004/08/05 11:47:10 $ $Revision: 1.8 $ -* Original: 2004/05/28 14:05:35 Revision: 1.59 Tag: hcf7_t20040602_01 -* Original: 2004/05/13 15:31:45 Revision: 1.53 Tag: hcf7_t7_20040513_01 -* Original: 2004/04/15 09:24:42 Revision: 1.44 Tag: hcf7_t7_20040415_01 -* Original: 2004/04/13 14:22:45 Revision: 1.43 Tag: t7_20040413_01 -* Original: 2004/04/01 15:32:55 Revision: 1.40 Tag: t7_20040401_01 -* Original: 2004/03/10 15:39:28 Revision: 1.36 Tag: t20040310_01 -* Original: 2004/03/03 14:10:12 Revision: 1.34 Tag: t20040304_01 -* Original: 2004/03/02 09:27:12 Revision: 1.32 Tag: t20040302_03 -* Original: 2004/02/24 13:00:29 Revision: 1.29 Tag: t20040224_01 -* Original: 2004/02/18 17:13:57 Revision: 1.26 Tag: t20040219_01 -* -* AUTHOR : Nico Valster -* -* SPECIFICATION: ........... -* -* DESC : Definitions and Prototypes for HCF only -* -************************************************************************************************** -* -* -* SOFTWARE LICENSE -* -* This software is provided subject to the following terms and conditions, -* which you should read carefully before using the software. Using this -* software indicates your acceptance of these terms and conditions. If you do -* not agree with these terms and conditions, do not use the software. -* -* COPYRIGHT © 1994 - 1995 by AT&T. All Rights Reserved -* COPYRIGHT © 1996 - 2000 by Lucent Technologies. All Rights Reserved -* COPYRIGHT © 2001 - 2004 by Agere Systems Inc. All Rights Reserved -* All rights reserved. -* -* Redistribution and use in source or binary forms, with or without -* modifications, are permitted provided that the following conditions are met: -* -* . Redistributions of source code must retain the above copyright notice, this -* list of conditions and the following Disclaimer as comments in the code as -* well as in the documentation and/or other materials provided with the -* distribution. -* -* . Redistributions in binary form must reproduce the above copyright notice, -* this list of conditions and the following Disclaimer in the documentation -* and/or other materials provided with the distribution. -* -* . Neither the name of Agere Systems Inc. nor the names of the contributors -* may be used to endorse or promote products derived from this software -* without specific prior written permission. -* -* Disclaimer -* -* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, -* INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY -* USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN -* RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY -* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -* ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT -* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT -* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -* DAMAGE. -* -* -*************************************************************************************************/ + * + * FILE : HCFDEF.H + * + * DATE : $Date: 2004/08/05 11:47:10 $ $Revision: 1.8 $ + * Original: 2004/05/28 14:05:35 Revision: 1.59 Tag: hcf7_t20040602_01 + * Original: 2004/05/13 15:31:45 Revision: 1.53 Tag: hcf7_t7_20040513_01 + * Original: 2004/04/15 09:24:42 Revision: 1.44 Tag: hcf7_t7_20040415_01 + * Original: 2004/04/13 14:22:45 Revision: 1.43 Tag: t7_20040413_01 + * Original: 2004/04/01 15:32:55 Revision: 1.40 Tag: t7_20040401_01 + * Original: 2004/03/10 15:39:28 Revision: 1.36 Tag: t20040310_01 + * Original: 2004/03/03 14:10:12 Revision: 1.34 Tag: t20040304_01 + * Original: 2004/03/02 09:27:12 Revision: 1.32 Tag: t20040302_03 + * Original: 2004/02/24 13:00:29 Revision: 1.29 Tag: t20040224_01 + * Original: 2004/02/18 17:13:57 Revision: 1.26 Tag: t20040219_01 + * + * AUTHOR : Nico Valster + * + * SPECIFICATION: ........... + * + * DESC : Definitions and Prototypes for HCF only + * + ************************************************************************************************** + * + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * COPYRIGHT © 1994 - 1995 by AT&T. All Rights Reserved + * COPYRIGHT © 1996 - 2000 by Lucent Technologies. All Rights Reserved + * COPYRIGHT © 2001 - 2004 by Agere Systems Inc. All Rights Reserved + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * + *************************************************************************************************/ /************************************************************************************************/ /********************************* P R E F I X E S ********************************************/ /************************************************************************************************/ -//IFB_ Interface Block -//HCMD_ Hermes Command -//HFS_ Hermes (Transmit/Receive) Frame Structure -//HREG_ Hermes Register +//IFB_ Interface Block +//HCMD_ Hermes Command +//HFS_ Hermes (Transmit/Receive) Frame Structure +//HREG_ Hermes Register /*************************************************************************************************/ -#if 0 // -#define BIT0 0x0001 -#define BIT1 0x0002 -#define BIT2 0x0004 -#define BIT3 0x0008 -#define BIT4 0x0010 -#define BIT5 0x0020 -#define BIT6 0x0040 -#define BIT7 0x0080 -#define BIT8 0x0100 -#define BIT9 0x0200 -#define BIT10 0x0400 -#define BIT11 0x0800 -#define BIT12 0x1000 -#define BIT13 0x2000 -#define BIT14 0x4000 -#define BIT15 0x8000 -#define BIT16 0x00010000 -#define BIT17 0x00020000 -#define BIT18 0x00040000 -#define BIT19 0x00080000 -#define BIT20 0x00100000 -#define BIT21 0x00200000 -#define BIT22 0x00400000 -#define BIT23 0x00800000 -#define BIT24 0x01000000 -#define BIT25 0x02000000 -#define BIT26 0x04000000 -#define BIT27 0x08000000 -#define BIT28 0x10000000 -#define BIT29 0x20000000 -#define BIT30 0x40000000 -#define BIT31 0x80000000 -#endif // 0 - /************************************************************************************************/ /********************************* GENERAL EQUATES **********************************************/ /************************************************************************************************/ -#define HCF_MAGIC 0x7D37 // "}7" Handle validation +#define HCF_MAGIC 0x7D37 // "}7" Handle validation -#define PLUG_DATA_OFFSET 0x00000800 //needed by some test tool on top of H-II NDIS driver +#define PLUG_DATA_OFFSET 0x00000800 //needed by some test tool on top of H-II NDIS driver -#define INI_TICK_INI 0x00040000L +#define INI_TICK_INI 0x00040000L -#define IO_IN 0 //hcfio_in_string -#define IO_OUT 1 //hcfio_out_string +#define IO_IN 0 //hcfio_in_string +#define IO_OUT 1 //hcfio_out_string //DO_ASSERT, create an artificial FALSE to force an ASSERT without the nasty compiler warning -#define DO_ASSERT ( assert_ifbp->IFB_Magic != HCF_MAGIC && assert_ifbp->IFB_Magic == HCF_MAGIC ) -#define NT_ASSERT 0x0000 //, NEVER_TESTED -#define NEVER_TESTED MERGE_2( 0xEFFE, 0xFEEF ) -#define SE_ASSERT 0x5EFF /* Side Effect, HCFASSERT invokation which are only called for the - * side effect and which should never trigger */ -#define DHF_FILE_NAME_OFFSET 10000 //to distinguish DHF from HCF asserts by means of line number -#define MMD_FILE_NAME_OFFSET 20000 //to distinguish MMD from HCF asserts by means of line number +#define DO_ASSERT ( assert_ifbp->IFB_Magic != HCF_MAGIC && assert_ifbp->IFB_Magic == HCF_MAGIC ) +#define NT_ASSERT 0x0000 //, NEVER_TESTED +#define NEVER_TESTED MERGE_2( 0xEFFE, 0xFEEF ) +#define SE_ASSERT 0x5EFF /* Side Effect, HCFASSERT invokation which are only called for the + * side effect and which should never trigger */ +#define DHF_FILE_NAME_OFFSET 10000 //to distinguish DHF from HCF asserts by means of line number +#define MMD_FILE_NAME_OFFSET 20000 //to distinguish MMD from HCF asserts by means of line number // trace codes used to // 1: profile execution times via HCF_TRACE and HCF_TRACE_VALUE // 2: hierarchical flow information via HCFLOGENTRY / HCFLOGEXIT -//#define HCF_TRACE_CONNECT useless -//#define HCF_TRACE_DISCONNECT useless -#define HCF_TRACE_ACTION 0x0000 // 0x0001 -#define HCF_TRACE_CNTL 0x0001 // 0x0002 -#define HCF_TRACE_DMA_RX_GET 0x0002 // 0x0004 -#define HCF_TRACE_DMA_RX_PUT 0x0003 // 0x0008 -#define HCF_TRACE_DMA_TX_GET 0x0004 // 0x0010 -#define HCF_TRACE_DMA_TX_PUT 0x0005 // 0x0020 -#define HCF_TRACE_GET_INFO 0x0006 // 0x0040 -#define HCF_TRACE_PUT_INFO 0x0007 // 0x0080 -#define HCF_TRACE_RCV_MSG 0x0008 // 0x0100 -#define HCF_TRACE_SEND_MSG 0x0009 // 0x0200 -#define HCF_TRACE_SERVICE_NIC 0x000A // 0x0400 +//#define HCF_TRACE_CONNECT useless +//#define HCF_TRACE_DISCONNECT useless +#define HCF_TRACE_ACTION 0x0000 // 0x0001 +#define HCF_TRACE_CNTL 0x0001 // 0x0002 +#define HCF_TRACE_DMA_RX_GET 0x0002 // 0x0004 +#define HCF_TRACE_DMA_RX_PUT 0x0003 // 0x0008 +#define HCF_TRACE_DMA_TX_GET 0x0004 // 0x0010 +#define HCF_TRACE_DMA_TX_PUT 0x0005 // 0x0020 +#define HCF_TRACE_GET_INFO 0x0006 // 0x0040 +#define HCF_TRACE_PUT_INFO 0x0007 // 0x0080 +#define HCF_TRACE_RCV_MSG 0x0008 // 0x0100 +#define HCF_TRACE_SEND_MSG 0x0009 // 0x0200 +#define HCF_TRACE_SERVICE_NIC 0x000A // 0x0400 // #define HCF_TRACE_ 0x000C // 0x1000 // #define HCF_TRACE_ 0x000D // 0x2000 // #define HCF_TRACE_ 0x000E // 0x4000 // #define HCF_TRACE_ 0x000F // 0x8000 -// ============================================ HCF_TRACE_... codes below 0x0010 are asserted on re-entry -#define HCF_TRACE_ACTION_KLUDGE 0x0010 /* once you start introducing kludges there is no end to it - * this is an escape to do not assert on re-entrancy problem caused - * by HCF_ACT_INT_FORCE_ON used to get Microsofts NDIS drivers going - */ -#define HCF_TRACE_STRIO 0x0020 -#define HCF_TRACE_ALLOC 0X0021 -#define HCF_TRACE_DL 0X0023 -#define HCF_TRACE_ISR_INFO 0X0024 -#define HCF_TRACE_CALIBRATE 0x0026 - -#define HCF_TRACE_CMD_CPL 0x0040 -#define HCF_TRACE_CMD_EXE 0x0041 -#define HCF_TRACE_GET_FID 0x0042 -#define HCF_TRACE_GET_FRAG 0x0043 -#define HCF_TRACE_INIT 0x0044 -#define HCF_TRACE_PUT_FRAG 0x0045 -#define HCF_TRACE_SETUP_BAP 0x0046 - -#define HCF_TRACE_EXIT 0x8000 // Keil C warns "long constant truncated to int" - -//#define BAP_0 HREG_DATA_0 //Used by DMA controller to access NIC RAM -#define BAP_1 HREG_DATA_1 //Used by HCF to access NIC RAM +// ============================================ HCF_TRACE_... codes below 0x0010 are asserted on re-entry +#define HCF_TRACE_ACTION_KLUDGE 0x0010 /* once you start introducing kludges there is no end to it + * this is an escape to do not assert on re-entrancy problem caused + * by HCF_ACT_INT_FORCE_ON used to get Microsofts NDIS drivers going + */ +#define HCF_TRACE_STRIO 0x0020 +#define HCF_TRACE_ALLOC 0X0021 +#define HCF_TRACE_DL 0X0023 +#define HCF_TRACE_ISR_INFO 0X0024 +#define HCF_TRACE_CALIBRATE 0x0026 + +#define HCF_TRACE_CMD_CPL 0x0040 +#define HCF_TRACE_CMD_EXE 0x0041 +#define HCF_TRACE_GET_FID 0x0042 +#define HCF_TRACE_GET_FRAG 0x0043 +#define HCF_TRACE_INIT 0x0044 +#define HCF_TRACE_PUT_FRAG 0x0045 +#define HCF_TRACE_SETUP_BAP 0x0046 + +#define HCF_TRACE_EXIT 0x8000 // Keil C warns "long constant truncated to int" + +//#define BAP_0 HREG_DATA_0 //Used by DMA controller to access NIC RAM +#define BAP_1 HREG_DATA_1 //Used by HCF to access NIC RAM //************************* Hermes Receive/Transmit Frame Structures //HFS_STAT //see MMD.H for HFS_STAT_ERR -#define HFS_STAT_MSG_TYPE 0xE000 //Hermes reported Message Type -#define HFS_STAT_MIC_KEY_ID 0x1800 //MIC key used (if any) -#define HFS_STAT_1042 0x2000 //RFC1042 Encoded -#define HFS_STAT_TUNNEL 0x4000 //Bridge-Tunnel Encoded -#define HFS_STAT_WMP_MSG 0x6000 //WaveLAN-II Management Protocol Frame +#define HFS_STAT_MSG_TYPE 0xE000 //Hermes reported Message Type +#define HFS_STAT_MIC_KEY_ID 0x1800 //MIC key used (if any) +#define HFS_STAT_1042 0x2000 //RFC1042 Encoded +#define HFS_STAT_TUNNEL 0x4000 //Bridge-Tunnel Encoded +#define HFS_STAT_WMP_MSG 0x6000 //WaveLAN-II Management Protocol Frame #if (HCF_TYPE) & HCF_TYPE_WPA -#define HFS_STAT_MIC 0x0010 //Frame contains MIC //;? re-instate when F/W ready +#define HFS_STAT_MIC 0x0010 //Frame contains MIC //;? re-instate when F/W ready #endif //************************* Hermes Register Offsets and Command bits -#define HREG_IO_RANGE 0x80 //I/O Range used by Hermes +#define HREG_IO_RANGE 0x80 //I/O Range used by Hermes //************************* Command/Status -#define HREG_CMD 0x00 // -#define HCMD_CMD_CODE 0x3F -#define HREG_PARAM_0 0x02 // -#define HREG_PARAM_1 0x04 // -#define HREG_PARAM_2 0x06 // -#define HREG_STAT 0x08 // -#define HREG_STAT_CMD_CODE 0x003F // -#define HREG_STAT_DIAG_ERR 0x0100 -#define HREG_STAT_INQUIRE_ERR 0x0500 -#define HREG_STAT_CMD_RESULT 0x7F00 // -#define HREG_RESP_0 0x0A // -#define HREG_RESP_1 0x0C // -#define HREG_RESP_2 0x0E // +#define HREG_CMD 0x00 // +#define HCMD_CMD_CODE 0x3F +#define HREG_PARAM_0 0x02 // +#define HREG_PARAM_1 0x04 // +#define HREG_PARAM_2 0x06 // +#define HREG_STAT 0x08 // +#define HREG_STAT_CMD_CODE 0x003F // +#define HREG_STAT_DIAG_ERR 0x0100 +#define HREG_STAT_INQUIRE_ERR 0x0500 +#define HREG_STAT_CMD_RESULT 0x7F00 // +#define HREG_RESP_0 0x0A // +#define HREG_RESP_1 0x0C // +#define HREG_RESP_2 0x0E // //************************* FID Management -#define HREG_INFO_FID 0x10 // -#define HREG_RX_FID 0x20 // -#define HREG_ALLOC_FID 0x22 // -#define HREG_TX_COMPL_FID 0x24 // +#define HREG_INFO_FID 0x10 // +#define HREG_RX_FID 0x20 // +#define HREG_ALLOC_FID 0x22 // +#define HREG_TX_COMPL_FID 0x24 // //************************* BAP //20031030 HWi Inserted this again because the dongle code uses this (GPIF.C) -//#define HREG_SELECT_0 0x18 // -//#define HREG_OFFSET_0 0x1C // -//#define HREG_DATA_0 0x36 // +//#define HREG_SELECT_0 0x18 // +//#define HREG_OFFSET_0 0x1C // +//#define HREG_DATA_0 0x36 // -//#define HREG_OFFSET_BUSY 0x8000 // use HCMD_BUSY -#define HREG_OFFSET_ERR 0x4000 // -//rsrvd #define HREG_OFFSET_DATA_OFFSET 0x0FFF // +//#define HREG_OFFSET_BUSY 0x8000 // use HCMD_BUSY +#define HREG_OFFSET_ERR 0x4000 // +//rsrvd #define HREG_OFFSET_DATA_OFFSET 0x0FFF // -#define HREG_SELECT_1 0x1A // -#define HREG_OFFSET_1 0x1E // -#define HREG_DATA_1 0x38 // +#define HREG_SELECT_1 0x1A // +#define HREG_OFFSET_1 0x1E // +#define HREG_DATA_1 0x38 // //************************* Event -#define HREG_EV_STAT 0x30 // -#define HREG_INT_EN 0x32 // -#define HREG_EV_ACK 0x34 // +#define HREG_EV_STAT 0x30 // +#define HREG_INT_EN 0x32 // +#define HREG_EV_ACK 0x34 // -#define HREG_EV_TICK 0x8000 //Auxiliary Timer Tick -//#define HREG_EV_RES 0x4000 //H-I only: H/W error (Wait Time-out) -#define HREG_EV_INFO_DROP 0x2000 //WMAC did not have sufficient RAM to build Unsollicited Frame +#define HREG_EV_TICK 0x8000 //Auxiliary Timer Tick +//#define HREG_EV_RES 0x4000 //H-I only: H/W error (Wait Time-out) +#define HREG_EV_INFO_DROP 0x2000 //WMAC did not have sufficient RAM to build Unsollicited Frame #if (HCF_TYPE) & HCF_TYPE_HII5 -#define HREG_EV_ACK_REG_READY 0x0000 +#define HREG_EV_ACK_REG_READY 0x0000 #else -#define HREG_EV_ACK_REG_READY 0x1000 //Workaround Kludge bit for H-II (not H-II.5) +#define HREG_EV_ACK_REG_READY 0x1000 //Workaround Kludge bit for H-II (not H-II.5) #endif // HCF_TYPE_HII5 #if (HCF_SLEEP) & ( HCF_CDS | HCF_DDS ) -#define HREG_EV_SLEEP_REQ 0x0800 +#define HREG_EV_SLEEP_REQ 0x0800 #else -#define HREG_EV_SLEEP_REQ 0x0000 +#define HREG_EV_SLEEP_REQ 0x0000 #endif // HCF_CDS / HCF_DDS #if HCF_DMA -//#define HREG_EV_LPESC 0x0400 // firmware sets this bit and clears it, not for host usage. -#define HREG_EV_RDMAD 0x0200 // rx frame in host memory -#define HREG_EV_TDMAD 0x0100 // tx frame in host memory processed -//#define HREG_EV_RXDMA 0x0040 // firmware kicks off DMA engine (bit is not for host usage) -//#define HREG_EV_TXDMA 0x0020 // firmware kicks off DMA engine (bit is not for host usage) -#define HREG_EV_FW_DMA 0x0460 // firmware / DMA engine I/F (bits are not for host usage) +//#define HREG_EV_LPESC 0x0400 // firmware sets this bit and clears it, not for host usage. +#define HREG_EV_RDMAD 0x0200 // rx frame in host memory +#define HREG_EV_TDMAD 0x0100 // tx frame in host memory processed +//#define HREG_EV_RXDMA 0x0040 // firmware kicks off DMA engine (bit is not for host usage) +//#define HREG_EV_TXDMA 0x0020 // firmware kicks off DMA engine (bit is not for host usage) +#define HREG_EV_FW_DMA 0x0460 // firmware / DMA engine I/F (bits are not for host usage) #else -#define HREG_EV_FW_DMA 0x0000 +#define HREG_EV_FW_DMA 0x0000 #endif // HCF_DMA -#define HREG_EV_INFO 0x0080 // Asynchronous Information Frame -#define HREG_EV_CMD 0x0010 // Command completed, Status and Response available -#define HREG_EV_ALLOC 0x0008 // Asynchronous part of Allocation/Reclaim completed -#define HREG_EV_TX_EXC 0x0004 // Asynchronous Transmission unsuccessful completed -#define HREG_EV_TX 0x0002 // Asynchronous Transmission successful completed -#define HREG_EV_RX 0x0001 // Asynchronous Receive Frame - -#define HREG_EV_TX_EXT ( (HCF_EXT) & (HCF_EXT_INT_TX_EX | HCF_EXT_INT_TICK ) ) - /* HREG_EV_TX_EXT := 0x0000 or HREG_EV_TX_EXC and/or HREG_EV_TICK - * could be extended with HREG_EV_TX */ +#define HREG_EV_INFO 0x0080 // Asynchronous Information Frame +#define HREG_EV_CMD 0x0010 // Command completed, Status and Response available +#define HREG_EV_ALLOC 0x0008 // Asynchronous part of Allocation/Reclaim completed +#define HREG_EV_TX_EXC 0x0004 // Asynchronous Transmission unsuccessful completed +#define HREG_EV_TX 0x0002 // Asynchronous Transmission successful completed +#define HREG_EV_RX 0x0001 // Asynchronous Receive Frame + +#define HREG_EV_TX_EXT ( (HCF_EXT) & (HCF_EXT_INT_TX_EX | HCF_EXT_INT_TICK ) ) +/* HREG_EV_TX_EXT := 0x0000 or HREG_EV_TX_EXC and/or HREG_EV_TICK + * could be extended with HREG_EV_TX */ #if HCF_EXT_INT_TX_EX != HREG_EV_TX_EXC err: these values should match; #endif // HCF_EXT_INT_TX_EX / HREG_EV_TX_EXC @@ -290,97 +253,97 @@ err: these values should match; #endif // HCF_EXT_INT_TICK / HREG_EV_TICK //************************* Host Software -#define HREG_SW_0 0x28 // -#define HREG_SW_1 0x2A // -#define HREG_SW_2 0x2C // -//rsrvd #define HREG_SW_3 0x2E // +#define HREG_SW_0 0x28 // +#define HREG_SW_1 0x2A // +#define HREG_SW_2 0x2C // +//rsrvd #define HREG_SW_3 0x2E // //************************* Control and Auxiliary Port -#define HREG_IO 0x12 -#define HREG_IO_SRESET 0x0001 -#define HREG_IO_WAKEUP_ASYNC 0x0002 -#define HREG_IO_WOKEN_UP 0x0004 -#define HREG_CNTL 0x14 // -//#define HREG_CNTL_WAKEUP_SYNC 0x0001 -#define HREG_CNTL_AUX_ENA_STAT 0xC000 -#define HREG_CNTL_AUX_DIS_STAT 0x0000 -#define HREG_CNTL_AUX_ENA_CNTL 0x8000 -#define HREG_CNTL_AUX_DIS_CNTL 0x4000 -#define HREG_CNTL_AUX_DSD 0x2000 -#define HREG_CNTL_AUX_ENA (HREG_CNTL_AUX_ENA_CNTL | HREG_CNTL_AUX_DIS_CNTL ) -#define HREG_SPARE 0x16 // -#define HREG_AUX_PAGE 0x3A // -#define HREG_AUX_OFFSET 0x3C // -#define HREG_AUX_DATA 0x3E // +#define HREG_IO 0x12 +#define HREG_IO_SRESET 0x0001 +#define HREG_IO_WAKEUP_ASYNC 0x0002 +#define HREG_IO_WOKEN_UP 0x0004 +#define HREG_CNTL 0x14 // +//#define HREG_CNTL_WAKEUP_SYNC 0x0001 +#define HREG_CNTL_AUX_ENA_STAT 0xC000 +#define HREG_CNTL_AUX_DIS_STAT 0x0000 +#define HREG_CNTL_AUX_ENA_CNTL 0x8000 +#define HREG_CNTL_AUX_DIS_CNTL 0x4000 +#define HREG_CNTL_AUX_DSD 0x2000 +#define HREG_CNTL_AUX_ENA (HREG_CNTL_AUX_ENA_CNTL | HREG_CNTL_AUX_DIS_CNTL ) +#define HREG_SPARE 0x16 // +#define HREG_AUX_PAGE 0x3A // +#define HREG_AUX_OFFSET 0x3C // +#define HREG_AUX_DATA 0x3E // #if HCF_DMA //************************* DMA (bus mastering) - // Be careful to use these registers only at a genuine 32 bits NIC - // On 16 bits NICs, these addresses are mapped into the range 0x00 through 0x3F with all consequences - // thereof, e.g. HREG_DMA_CTRL register maps to HREG_CMD. -#define HREG_DMA_CTRL 0x0040 -#define HREG_TXDMA_PTR32 0x0044 -#define HREG_TXDMA_PRIO_PTR32 0x0048 -#define HREG_TXDMA_HIPRIO_PTR32 0x004C -#define HREG_RXDMA_PTR32 0x0050 -#define HREG_CARDDETECT_1 0x007C // contains 7D37 -#define HREG_CARDDETECT_2 0x007E // contains 7DE7 -#define HREG_FREETIMER 0x0058 -#define HREG_DMA_RX_CNT 0x0026 +// Be careful to use these registers only at a genuine 32 bits NIC +// On 16 bits NICs, these addresses are mapped into the range 0x00 through 0x3F with all consequences +// thereof, e.g. HREG_DMA_CTRL register maps to HREG_CMD. +#define HREG_DMA_CTRL 0x0040 +#define HREG_TXDMA_PTR32 0x0044 +#define HREG_TXDMA_PRIO_PTR32 0x0048 +#define HREG_TXDMA_HIPRIO_PTR32 0x004C +#define HREG_RXDMA_PTR32 0x0050 +#define HREG_CARDDETECT_1 0x007C // contains 7D37 +#define HREG_CARDDETECT_2 0x007E // contains 7DE7 +#define HREG_FREETIMER 0x0058 +#define HREG_DMA_RX_CNT 0x0026 /****************************************************************************** -* Defines for the bits in the DmaControl register (@40h) -******************************************************************************/ -#define HREG_DMA_CTRL_RXHWEN 0x80000000 // high word enable bit -#define HREG_DMA_CTRL_RXRESET 0x40000000 // tx dma init bit -#define HREG_DMA_CTRL_RXBAP1 BIT29 -#define HREG_DMA_CTRL_RX_STALLED BIT28 -#define HREG_DMA_CTRL_RXAUTOACK_DMADONE BIT27 // no host involvement req. for TDMADONE event -#define HREG_DMA_CTRL_RXAUTOACK_INFO BIT26 // no host involvement req. for alloc event -#define HREG_DMA_CTRL_RXAUTOACK_DMAEN 0x02000000 // no host involvement req. for TxDMAen event -#define HREG_DMA_CTRL_RXAUTOACK_RX 0x01000000 // no host involvement req. for tx event -#define HREG_DMA_CTRL_RX_BUSY BIT23 // read only bit -//#define HREG_DMA_CTRL_RX_RBUFCONT_PLAIN 0 // bits 21..20 -//#define HREG_DMA_CTRL_RX_MODE_PLAIN_DMA 0 // mode 0 -#define HREG_DMA_CTRL_RX_MODE_SINGLE_PACKET 0x00010000 // mode 1 -#define HREG_DMA_CTRL_RX_MODE_MULTI_PACKET 0x00020000 // mode 2 -//#define HREG_DMA_CTRL_RX_MODE_DISABLE (0x00020000|0x00010000) // disable tx dma engine -#define HREG_DMA_CTRL_TXHWEN 0x8000 // low word enable bit -#define HREG_DMA_CTRL_TXRESET 0x4000 // rx dma init bit -#define HREG_DMA_CTRL_TXBAP1 BIT13 -#define HREG_DMA_CTRL_TXAUTOACK_DMADONE BIT11 // no host involvement req. for RxDMADONE event -#define HREG_DMA_CTRL_TXAUTOACK_DMAEN 0x00000400 // no host involvement req. for RxDMAen event -#define HREG_DMA_CTRL_TXAUTOACK_DMAALLOC 0x00000200 // no host involvement req. for info event -#define HREG_DMA_CTRL_TXAUTOACK_TX 0x00000100 // no host involvement req. for rx event -#define HREG_DMA_CTRL_TX_BUSY BIT7 // read only bit -//#define HREG_DMA_CTRL_TX_TBUFCONT_PLAIN 0 // bits 6..5 -//#define HREG_DMA_CTRL_TX_MODE_PLAIN_DMA 0 // mode 0 -#define HREG_DMA_CTRL_TX_MODE_SINGLE_PACKET BIT0 // mode 1 -#define HREG_DMA_CTRL_TX_MODE_MULTI_PACKET 0x00000002 // mode 2 -//#define HREG_DMA_CTRL_TX_MODE_DISABLE (0x00000001|0x00000002) // disable tx dma engine + * Defines for the bits in the DmaControl register (@40h) + ******************************************************************************/ +#define HREG_DMA_CTRL_RXHWEN 0x80000000 // high word enable bit +#define HREG_DMA_CTRL_RXRESET 0x40000000 // tx dma init bit +#define HREG_DMA_CTRL_RXBAP1 BIT29 +#define HREG_DMA_CTRL_RX_STALLED BIT28 +#define HREG_DMA_CTRL_RXAUTOACK_DMADONE BIT27 // no host involvement req. for TDMADONE event +#define HREG_DMA_CTRL_RXAUTOACK_INFO BIT26 // no host involvement req. for alloc event +#define HREG_DMA_CTRL_RXAUTOACK_DMAEN 0x02000000 // no host involvement req. for TxDMAen event +#define HREG_DMA_CTRL_RXAUTOACK_RX 0x01000000 // no host involvement req. for tx event +#define HREG_DMA_CTRL_RX_BUSY BIT23 // read only bit +//#define HREG_DMA_CTRL_RX_RBUFCONT_PLAIN 0 // bits 21..20 +//#define HREG_DMA_CTRL_RX_MODE_PLAIN_DMA 0 // mode 0 +#define HREG_DMA_CTRL_RX_MODE_SINGLE_PACKET 0x00010000 // mode 1 +#define HREG_DMA_CTRL_RX_MODE_MULTI_PACKET 0x00020000 // mode 2 +//#define HREG_DMA_CTRL_RX_MODE_DISABLE (0x00020000|0x00010000) // disable tx dma engine +#define HREG_DMA_CTRL_TXHWEN 0x8000 // low word enable bit +#define HREG_DMA_CTRL_TXRESET 0x4000 // rx dma init bit +#define HREG_DMA_CTRL_TXBAP1 BIT13 +#define HREG_DMA_CTRL_TXAUTOACK_DMADONE BIT11 // no host involvement req. for RxDMADONE event +#define HREG_DMA_CTRL_TXAUTOACK_DMAEN 0x00000400 // no host involvement req. for RxDMAen event +#define HREG_DMA_CTRL_TXAUTOACK_DMAALLOC 0x00000200 // no host involvement req. for info event +#define HREG_DMA_CTRL_TXAUTOACK_TX 0x00000100 // no host involvement req. for rx event +#define HREG_DMA_CTRL_TX_BUSY BIT7 // read only bit +//#define HREG_DMA_CTRL_TX_TBUFCONT_PLAIN 0 // bits 6..5 +//#define HREG_DMA_CTRL_TX_MODE_PLAIN_DMA 0 // mode 0 +#define HREG_DMA_CTRL_TX_MODE_SINGLE_PACKET BIT0 // mode 1 +#define HREG_DMA_CTRL_TX_MODE_MULTI_PACKET 0x00000002 // mode 2 +//#define HREG_DMA_CTRL_TX_MODE_DISABLE (0x00000001|0x00000002) // disable tx dma engine //configuration DWORD to configure DMA for mode2 operation, using BAP0 as the DMA BAP. #define DMA_CTRLSTAT_GO (HREG_DMA_CTRL_RXHWEN | HREG_DMA_CTRL_RX_MODE_MULTI_PACKET | \ HREG_DMA_CTRL_RXAUTOACK_DMAEN | HREG_DMA_CTRL_RXAUTOACK_RX | \ HREG_DMA_CTRL_TXHWEN | /*;?HREG_DMA_CTRL_TX_TBUFCONT_PLAIN |*/ \ - HREG_DMA_CTRL_TX_MODE_MULTI_PACKET | HREG_DMA_CTRL_TXAUTOACK_DMAEN |\ + HREG_DMA_CTRL_TX_MODE_MULTI_PACKET | HREG_DMA_CTRL_TXAUTOACK_DMAEN | \ HREG_DMA_CTRL_TXAUTOACK_DMAALLOC) //configuration DWORD to reset both the Tx and Rx DMA engines #define DMA_CTRLSTAT_RESET (HREG_DMA_CTRL_RXHWEN | HREG_DMA_CTRL_RXRESET | HREG_DMA_CTRL_TXHWEN | HREG_DMA_CTRL_TXRESET) -//#define DESC_DMA_OWNED 0x80000000 // BIT31 -#define DESC_DMA_OWNED 0x8000 // BIT31 -#define DESC_SOP 0x8000 // BIT15 -#define DESC_EOP 0x4000 // BIT14 +//#define DESC_DMA_OWNED 0x80000000 // BIT31 +#define DESC_DMA_OWNED 0x8000 // BIT31 +#define DESC_SOP 0x8000 // BIT15 +#define DESC_EOP 0x4000 // BIT14 -#define DMA_RX 0 -#define DMA_TX 1 +#define DMA_RX 0 +#define DMA_TX 1 -// #define IFB_RxFirstDesc IFB_FirstDesc[DMA_RX] -// #define IFB_TxFirstDesc IFB_FirstDesc[DMA_TX] -// #define IFB_RxLastDesc IFB_LastDesc[DMA_RX] -// #define IFB_TxLastDesc IFB_LastDesc[DMA_TX] +// #define IFB_RxFirstDesc IFB_FirstDesc[DMA_RX] +// #define IFB_TxFirstDesc IFB_FirstDesc[DMA_TX] +// #define IFB_RxLastDesc IFB_LastDesc[DMA_RX] +// #define IFB_TxLastDesc IFB_LastDesc[DMA_TX] #endif // HCF_DMA // @@ -390,96 +353,96 @@ err: these values should match; // Hermes Command Codes and Qualifier bits -#define HCMD_BUSY 0x8000 // Busy bit, applicable for all commands -#define HCMD_INI 0x0000 // -#define HCMD_ENABLE HCF_CNTL_ENABLE // 0x0001 -#define HCMD_DISABLE HCF_CNTL_DISABLE // 0x0002 -#define HCMD_CONNECT HCF_CNTL_CONNECT // 0x0003 -#define HCMD_EXECUTE 0x0004 // -#define HCMD_DISCONNECT HCF_CNTL_DISCONNECT // 0x0005 -#define HCMD_SLEEP 0x0006 // -#define HCMD_CONTINUE HCF_CNTL_CONTINUE // 0x0007 -#define HCMD_RETRY 0x0100 // Retry bit -#define HCMD_ALLOC 0x000A // -#define HCMD_TX 0x000B // -#define HCMD_RECL 0x0100 // Reclaim bit, applicable for Tx and Inquire -#define HCMD_INQUIRE 0x0011 // -#define HCMD_ACCESS 0x0021 // -#define HCMD_ACCESS_WRITE 0x0100 // Write bit -#define HCMD_PROGRAM 0x0022 // -#define HCMD_READ_MIF 0x0030 -#define HCMD_WRITE_MIF 0x0031 -#define HCMD_THESEUS 0x0038 -#define HCMD_STARTPREAMBLE 0x0E00 // Start continuous preamble Tx -#define HCMD_STOP 0x0F00 // Stop Theseus test mode +#define HCMD_BUSY 0x8000 // Busy bit, applicable for all commands +#define HCMD_INI 0x0000 // +#define HCMD_ENABLE HCF_CNTL_ENABLE // 0x0001 +#define HCMD_DISABLE HCF_CNTL_DISABLE // 0x0002 +#define HCMD_CONNECT HCF_CNTL_CONNECT // 0x0003 +#define HCMD_EXECUTE 0x0004 // +#define HCMD_DISCONNECT HCF_CNTL_DISCONNECT // 0x0005 +#define HCMD_SLEEP 0x0006 // +#define HCMD_CONTINUE HCF_CNTL_CONTINUE // 0x0007 +#define HCMD_RETRY 0x0100 // Retry bit +#define HCMD_ALLOC 0x000A // +#define HCMD_TX 0x000B // +#define HCMD_RECL 0x0100 // Reclaim bit, applicable for Tx and Inquire +#define HCMD_INQUIRE 0x0011 // +#define HCMD_ACCESS 0x0021 // +#define HCMD_ACCESS_WRITE 0x0100 // Write bit +#define HCMD_PROGRAM 0x0022 // +#define HCMD_READ_MIF 0x0030 +#define HCMD_WRITE_MIF 0x0031 +#define HCMD_THESEUS 0x0038 +#define HCMD_STARTPREAMBLE 0x0E00 // Start continuous preamble Tx +#define HCMD_STOP 0x0F00 // Stop Theseus test mode //Configuration Management // -#define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM 1 // Default Bottom Compatibility for Primary Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_PRI_3_TOP 1 // Default Top Compatibility for Primary Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM 1 // Default Bottom Compatibility for Primary Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_PRI_3_TOP 1 // Default Top Compatibility for Primary Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM 1 // Default Bottom Compatibility for H/W - driver I/F -#define CFG_DRV_ACT_RANGES_HSI_4_TOP 1 // Default Top Compatibility for H/W - driver I/F +#define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM 1 // Default Bottom Compatibility for H/W - driver I/F +#define CFG_DRV_ACT_RANGES_HSI_4_TOP 1 // Default Top Compatibility for H/W - driver I/F -#define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM 1 // Default Bottom Compatibility for H/W - driver I/F -#define CFG_DRV_ACT_RANGES_HSI_5_TOP 1 // Default Top Compatibility for H/W - driver I/F +#define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM 1 // Default Bottom Compatibility for H/W - driver I/F +#define CFG_DRV_ACT_RANGES_HSI_5_TOP 1 // Default Top Compatibility for H/W - driver I/F #if (HCF_TYPE) & HCF_TYPE_WPA -#define CFG_DRV_ACT_RANGES_APF_1_BOTTOM 16 // Default Bottom Compatibility for AP Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_APF_1_TOP 16 // Default Top Compatibility for AP Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_APF_1_BOTTOM 16 // Default Bottom Compatibility for AP Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_APF_1_TOP 16 // Default Top Compatibility for AP Firmware - driver I/F #else //;? is this REALLY O.K. -#define CFG_DRV_ACT_RANGES_APF_1_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_APF_1_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_APF_1_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_APF_1_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F #endif // HCF_TYPE_WPA -#define CFG_DRV_ACT_RANGES_APF_2_BOTTOM 2 // Default Bottom Compatibility for AP Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_APF_2_TOP 2 // Default Top Compatibility for AP Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_APF_2_BOTTOM 2 // Default Bottom Compatibility for AP Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_APF_2_TOP 2 // Default Top Compatibility for AP Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_APF_3_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_APF_3_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_APF_3_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_APF_3_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_APF_4_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_APF_4_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_APF_4_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_APF_4_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F #if (HCF_TYPE) & HCF_TYPE_HII5 -#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM 6 // Default Bottom Compatibility for Station Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_STA_2_TOP 6 // Default Top Compatibility for Station Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM 6 // Default Bottom Compatibility for Station Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_STA_2_TOP 6 // Default Top Compatibility for Station Firmware - driver I/F #else // (HCF_TYPE) & HCF_TYPE_HII5 -#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_STA_2_TOP 2 // Default Top Compatibility for Station Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_STA_2_TOP 2 // Default Top Compatibility for Station Firmware - driver I/F #endif // (HCF_TYPE) & HCF_TYPE_HII5 -#define CFG_DRV_ACT_RANGES_STA_3_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_STA_3_TOP 1 // Default Top Compatibility for Station Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_STA_3_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_STA_3_TOP 1 // Default Top Compatibility for Station Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_STA_4_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F -#define CFG_DRV_ACT_RANGES_STA_4_TOP 1 // Default Top Compatibility for Station Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_STA_4_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F +#define CFG_DRV_ACT_RANGES_STA_4_TOP 1 // Default Top Compatibility for Station Firmware - driver I/F //--------------------------------------------------------------------------------------------------------------------- #if defined HCF_CFG_PRI_1_TOP || defined HCF_CFG_PRI_1_BOTTOM -err: PRI_1 not supported for H-I; // Compatibility for Primary Firmware - driver I/F +err: PRI_1 not supported for H-I; // Compatibility for Primary Firmware - driver I/F #endif // HCF_CFG_PRI_1_TOP / HCF_CFG_PRI_1_BOTTOM #if defined HCF_CFG_PRI_2_TOP || defined HCF_CFG_PRI_2_BOTTOM -err: PRI_2 not supported for H-I; // Compatibility for Primary Firmware - driver I/F +err: PRI_2 not supported for H-I; // Compatibility for Primary Firmware - driver I/F #endif // HCF_CFG_PRI_2_TOP / HCF_CFG_PRI_2_BOTTOM -#ifdef HCF_CFG_PRI_3_TOP // Top Compatibility for Primary Firmware - driver I/F -#if HCF_CFG_PRI_3_TOP == 0 || \ +#ifdef HCF_CFG_PRI_3_TOP // Top Compatibility for Primary Firmware - driver I/F +#if HCF_CFG_PRI_3_TOP == 0 || \ CFG_DRV_ACT_RANGES_PRI_3_BOTTOM <= HCF_CFG_PRI_3_TOP && HCF_CFG_PRI_3_TOP <= CFG_DRV_ACT_RANGES_PRI_3_TOP #undef CFG_DRV_ACT_RANGES_PRI_3_TOP -#define CFG_DRV_ACT_RANGES_PRI_3_TOP HCF_CFG_PRI_3_TOP +#define CFG_DRV_ACT_RANGES_PRI_3_TOP HCF_CFG_PRI_3_TOP #else err: ; #endif #endif // HCF_CFG_PRI_3_TOP -#ifdef HCF_CFG_PRI_3_BOTTOM // Bottom Compatibility for Primary Firmware - driver I/F +#ifdef HCF_CFG_PRI_3_BOTTOM // Bottom Compatibility for Primary Firmware - driver I/F #if CFG_DRV_ACT_RANGES_PRI_3_BOTTOM <= HCF_CFG_PRI_3_BOTTOM && HCF_CFG_PRI_3_BOTTOM <= CFG_DRV_ACT_RANGES_PRI_3_TOP #undef CFG_DRV_ACT_RANGES_PRI_3_BOTTOM -#define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM HCF_CFG_PRI_3_BOTTOM +#define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM HCF_CFG_PRI_3_BOTTOM #else err: ; #endif @@ -488,77 +451,77 @@ err: ; //--------------------------------------------------------------------------------------------------------------------- #if defined HCF_CFG_HSI_0_TOP || defined HCF_CFG_HSI_0_BOTTOM -err: HSI_0 not supported for H-I; // Compatibility for HSI I/F +err: HSI_0 not supported for H-I; // Compatibility for HSI I/F #endif // HCF_CFG_HSI_0_TOP / HCF_CFG_HSI_0_BOTTOM #if defined HCF_CFG_HSI_1_TOP || defined HCF_CFG_HSI_1_BOTTOM -err: HSI_1 not supported for H-I; // Compatibility for HSI I/F +err: HSI_1 not supported for H-I; // Compatibility for HSI I/F #endif // HCF_CFG_HSI_1_TOP / HCF_CFG_HSI_1_BOTTOM #if defined HCF_CFG_HSI_2_TOP || defined HCF_CFG_HSI_2_BOTTOM -err: HSI_2 not supported for H-I; // Compatibility for HSI I/F +err: HSI_2 not supported for H-I; // Compatibility for HSI I/F #endif // HCF_CFG_HSI_2_TOP / HCF_CFG_HSI_2_BOTTOM #if defined HCF_CFG_HSI_3_TOP || defined HCF_CFG_HSI_3_BOTTOM -err: HSI_3 not supported for H-I; // Compatibility for HSI I/F +err: HSI_3 not supported for H-I; // Compatibility for HSI I/F #endif // HCF_CFG_HSI_3_TOP / HCF_CFG_HSI_3_BOTTOM -#ifdef HCF_CFG_HSI_4_TOP // Top Compatibility for HSI I/F -#if HCF_CFG_HSI_4_TOP == 0 || \ +#ifdef HCF_CFG_HSI_4_TOP // Top Compatibility for HSI I/F +#if HCF_CFG_HSI_4_TOP == 0 || \ CFG_DRV_ACT_RANGES_HSI_4_BOTTOM <= CF_CFG_HSI_4_TOP && HCF_CFG_HSI_4_TOP <= CFG_DRV_ACT_RANGES_HSI_4_TOP #undef CFG_DRV_ACT_RANGES_HSI_4_TOP -#define CFG_DRV_ACT_RANGES_HSI_4_TOP HCF_CFG_HSI_4_TOP +#define CFG_DRV_ACT_RANGES_HSI_4_TOP HCF_CFG_HSI_4_TOP #else err: ; #endif #endif // HCF_CFG_HSI_4_TOP -#ifdef HCF_CFG_HSI_4_BOTTOM // Bottom Compatibility for HSI I/F +#ifdef HCF_CFG_HSI_4_BOTTOM // Bottom Compatibility for HSI I/F #if CFG_DRV_ACT_RANGES_HSI_4_BOTTOM <= HCF_CFG_HSI_4_BOTTOM && HCF_CFG_HSI_4_BOTTOM <= CFG_DRV_ACT_RANGES_HSI_4_TOP #undef CFG_DRV_ACT_RANGES_HSI_4_BOTTOM -#define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM HCF_CFG_HSI_4_BOTTOM +#define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM HCF_CFG_HSI_4_BOTTOM #else err: ; #endif #endif // HCF_CFG_HSI_4_BOTTOM -#ifdef HCF_CFG_HSI_5_TOP // Top Compatibility for HSI I/F -#if HCF_CFG_HSI_5_TOP == 0 || \ +#ifdef HCF_CFG_HSI_5_TOP // Top Compatibility for HSI I/F +#if HCF_CFG_HSI_5_TOP == 0 || \ CFG_DRV_ACT_RANGES_HSI_5_BOTTOM <= CF_CFG_HSI_5_TOP && HCF_CFG_HSI_5_TOP <= CFG_DRV_ACT_RANGES_HSI_5_TOP #undef CFG_DRV_ACT_RANGES_HSI_5_TOP -#define CFG_DRV_ACT_RANGES_HSI_5_TOP HCF_CFG_HSI_5_TOP +#define CFG_DRV_ACT_RANGES_HSI_5_TOP HCF_CFG_HSI_5_TOP #else err: ; #endif #endif // HCF_CFG_HSI_5_TOP -#ifdef HCF_CFG_HSI_5_BOTTOM // Bottom Compatibility for HSI I/F +#ifdef HCF_CFG_HSI_5_BOTTOM // Bottom Compatibility for HSI I/F #if CFG_DRV_ACT_RANGES_HSI_5_BOTTOM <= HCF_CFG_HSI_5_BOTTOM && HCF_CFG_HSI_5_BOTTOM <= CFG_DRV_ACT_RANGES_HSI_5_TOP #undef CFG_DRV_ACT_RANGES_HSI_5_BOTTOM -#define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM HCF_CFG_HSI_5_BOTTOM +#define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM HCF_CFG_HSI_5_BOTTOM #else err: ; #endif #endif // HCF_CFG_HSI_5_BOTTOM //--------------------------------------------------------------------------------------------------------------------- #if defined HCF_CFG_APF_1_TOP || defined HCF_CFG_APF_1_BOTTOM -err: APF_1 not supported for H-I; // Compatibility for AP Firmware - driver I/F +err: APF_1 not supported for H-I; // Compatibility for AP Firmware - driver I/F #endif // HCF_CFG_APF_1_TOP / HCF_CFG_APF_1_BOTTOM -#ifdef HCF_CFG_APF_2_TOP // Top Compatibility for AP Firmware - driver I/F -#if HCF_CFG_APF_2_TOP == 0 || \ +#ifdef HCF_CFG_APF_2_TOP // Top Compatibility for AP Firmware - driver I/F +#if HCF_CFG_APF_2_TOP == 0 || \ CFG_DRV_ACT_RANGES_APF_2_BOTTOM <= HCF_CFG_APF_2_TOP && HCF_CFG_APF_2_TOP <= CFG_DRV_ACT_RANGES_APF_2_TOP #undef CFG_DRV_ACT_RANGES_APF_2_TOP -#define CFG_DRV_ACT_RANGES_APF_2_TOP HCF_CFG_APF_2_TOP +#define CFG_DRV_ACT_RANGES_APF_2_TOP HCF_CFG_APF_2_TOP #else err: ; #endif #endif // HCF_CFG_APF_TOP -#ifdef HCF_CFG_APF_2_BOTTOM // Bottom Compatibility for AP Firmware - driver I/F +#ifdef HCF_CFG_APF_2_BOTTOM // Bottom Compatibility for AP Firmware - driver I/F #if CFG_DRV_ACT_RANGES_APF_2_BOTTOM <= HCF_CFG_APF_2_BOTTOM && HCF_CFG_APF_2_BOTTOM <= CFG_DRV_ACT_RANGES_APF_2_TOP #undef CFG_DRV_ACT_RANGES_APF_2_BOTTOM -#define CFG_DRV_ACT_RANGES_APF_2_BOTTOM HCF_CFG_APF_2_BOTTOM +#define CFG_DRV_ACT_RANGES_APF_2_BOTTOM HCF_CFG_APF_2_BOTTOM #else err: ; #endif @@ -566,23 +529,23 @@ err: ; //--------------------------------------------------------------------------------------------------------------------- #if defined HCF_CFG_STA_1_TOP || defined HCF_CFG_STA_1_BOTTOM -err: STA_1 not supported for H-I; // Compatibility for Station Firmware - driver I/F +err: STA_1 not supported for H-I; // Compatibility for Station Firmware - driver I/F #endif // HCF_CFG_STA_1_TOP / HCF_CFG_STA_1_BOTTOM -#ifdef HCF_CFG_STA_2_TOP // Top Compatibility for Station Firmware - driver I/F -#if HCF_CFG_STA_2_TOP == 0 || \ +#ifdef HCF_CFG_STA_2_TOP // Top Compatibility for Station Firmware - driver I/F +#if HCF_CFG_STA_2_TOP == 0 || \ CFG_DRV_ACT_RANGES_STA_2_BOTTOM <= HCF_CFG_STA_2_TOP && HCF_CFG_STA_2_TOP <= CFG_DRV_ACT_RANGES_STA_2_TOP #undef CFG_DRV_ACT_RANGES_STA_2_TOP -#define CFG_DRV_ACT_RANGES_STA_2_TOP HCF_CFG_STA_2_TOP +#define CFG_DRV_ACT_RANGES_STA_2_TOP HCF_CFG_STA_2_TOP #else err: ; #endif #endif // HCF_CFG_STA_TOP -#ifdef HCF_CFG_STA_2_BOTTOM // Bottom Compatibility for Station Firmware - driver I/F +#ifdef HCF_CFG_STA_2_BOTTOM // Bottom Compatibility for Station Firmware - driver I/F #if CFG_DRV_ACT_RANGES_STA_2_BOTTOM <= HCF_CFG_STA_2_BOTTOM && HCF_CFG_STA_2_BOTTOM <= CFG_DRV_ACT_RANGES_STA_2_TOP #undef CFG_DRV_ACT_RANGES_STA_2_BOTTOM -#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM HCF_CFG_STA_2_BOTTOM +#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM HCF_CFG_STA_2_BOTTOM #else err: ; #endif @@ -597,32 +560,32 @@ err: ; #if defined MSF_WAIT err: MSF should no longer supply this macro; #else -#define MSF_WAIT(x) \ - { PROT_CNT_INI \ - HCF_WAIT_WHILE( ( IPW( HREG_IO ) & HREG_IO_WOKEN_UP ) == 0 ); \ - HCFASSERT( prot_cnt, IPW( HREG_IO ) ) \ - } +#define MSF_WAIT(x) \ + { PROT_CNT_INI \ + HCF_WAIT_WHILE( ( IPW( HREG_IO ) & HREG_IO_WOKEN_UP ) == 0 ); \ + HCFASSERT( prot_cnt, IPW( HREG_IO ) ) \ + } #endif // MSF_WAIT #else -#define MSF_WAIT(x) /*NOP*/ +#define MSF_WAIT(x) /*NOP*/ #endif // HCF_SLEEP -#define LOF(x) (sizeof(x)/sizeof(hcf_16)-1) +#define LOF(x) (sizeof(x)/sizeof(hcf_16)-1) -#define MUL_BY_2( x ) ( (x) << 1 ) //used to multiply by 2 -#define DIV_BY_2( x ) ( (x) >> 1 ) //used to divide by 2 +#define MUL_BY_2( x ) ( (x) << 1 ) //used to multiply by 2 +#define DIV_BY_2( x ) ( (x) >> 1 ) //used to divide by 2 //resolve problems on for some 16 bits compilers to create 32 bit values -#define MERGE_2( hw, lw ) ( ( ((hcf_32)(hw)) << 16 ) | ((hcf_16)(lw)) ) +#define MERGE_2( hw, lw ) ( ( ((hcf_32)(hw)) << 16 ) | ((hcf_16)(lw)) ) #if ! defined HCF_STATIC -#define HCF_STATIC static -#endif // HCF_STATIC +#define HCF_STATIC static +#endif // HCF_STATIC #if ( (HCF_TYPE) & HCF_TYPE_HII5 ) == 0 -#define DAWA_ACK( mask) { \ - OPW( HREG_EV_ACK, mask | HREG_EV_ACK_REG_READY ); \ - OPW( HREG_EV_ACK, (mask & ~HREG_EV_ALLOC) | HREG_EV_ACK_REG_READY ); } +#define DAWA_ACK( mask) { \ + OPW( HREG_EV_ACK, mask | HREG_EV_ACK_REG_READY ); \ + OPW( HREG_EV_ACK, (mask & ~HREG_EV_ALLOC) | HREG_EV_ACK_REG_READY ); } #define DAWA_ZERO_FID(reg) OPW( reg, 0 ); #else #define DAWA_ACK( mask) OPW( HREG_EV_ACK, mask ); @@ -630,20 +593,20 @@ err: MSF should no longer supply this macro; #endif // HCF_TYPE_HII5 #if (HCF_TYPE) & HCF_TYPE_WPA -#define CALC_RX_MIC( p, len ) calc_mic_rx_frag( ifbp, p, len ) -#define CALC_TX_MIC( p, len ) calc_mic_tx_frag( ifbp, p, len ) +#define CALC_RX_MIC( p, len ) calc_mic_rx_frag( ifbp, p, len ) +#define CALC_TX_MIC( p, len ) calc_mic_tx_frag( ifbp, p, len ) #define IF_SSN(x) x #define IF_NOT_SSN(x) #else -#define CALC_RX_MIC( p, len ) -#define CALC_TX_MIC( p, len ) +#define CALC_RX_MIC( p, len ) +#define CALC_TX_MIC( p, len ) #define MIC_RX_RTN( mic, dw ) #define MIC_TX_RTN( mic, dw ) #define IF_SSN(x) #define IF_NOT_SSN(x) x #endif // HCF_TYPE_WPA -#if HCF_TALLIES & HCF_TALLIES_HCF //HCF tally support +#if HCF_TALLIES & HCF_TALLIES_HCF //HCF tally support #define IF_TALLY(x) x #else #define IF_TALLY(x) @@ -651,23 +614,23 @@ err: MSF should no longer supply this macro; #if HCF_DMA -#define IF_DMA(x) x +#define IF_DMA(x) x #define IF_NOT_DMA(x) -#define IF_USE_DMA(x) if ( ifbp->IFB_CntlOpt & USE_DMA ) x -#define IF_NOT_USE_DMA(x) if ( !(ifbp->IFB_CntlOpt & USE_DMA) ) x +#define IF_USE_DMA(x) if ( ifbp->IFB_CntlOpt & USE_DMA ) x +#define IF_NOT_USE_DMA(x) if ( !(ifbp->IFB_CntlOpt & USE_DMA) ) x #else #define IF_DMA(x) -#define IF_NOT_DMA(x) x +#define IF_NOT_DMA(x) x #define IF_USE_DMA(x) -#define IF_NOT_USE_DMA(x) x +#define IF_NOT_USE_DMA(x) x #endif // HCF_DMA #define IPW(x) ((hcf_16)IN_PORT_WORD( ifbp->IFB_IOBase + (x) ) ) #define OPW(x, y) OUT_PORT_WORD( ifbp->IFB_IOBase + (x), y ) - /* make sure the implementation of HCF_WAIT_WHILE is such that there may be multiple HCF_WAIT_WHILE calls - * in a row and that when one fails all subsequent fail immediately without reinitialization of prot_cnt - */ +/* make sure the implementation of HCF_WAIT_WHILE is such that there may be multiple HCF_WAIT_WHILE calls + * in a row and that when one fails all subsequent fail immediately without reinitialization of prot_cnt + */ #if HCF_PROT_TIME == 0 #define PROT_CNT_INI #define IF_PROT_TIME(x) @@ -677,8 +640,8 @@ err: MSF should no longer supply this macro; #define HCF_WAIT_WHILE( x ) while ( x ) /*NOP*/; #endif // HCF_YIELD #else -#define PROT_CNT_INI hcf_32 prot_cnt = ifbp->IFB_TickIni; -#define IF_PROT_TIME(x) x +#define PROT_CNT_INI hcf_32 prot_cnt = ifbp->IFB_TickIni; +#define IF_PROT_TIME(x) x #if defined HCF_YIELD #define HCF_WAIT_WHILE( x ) while ( prot_cnt && (x) && (HCF_YIELD) ) prot_cnt--; #else @@ -697,7 +660,7 @@ err: you used an invalid bitmask; #endif // HCF_EX_INT #if 0 //get compiler going -#if HCF_EX_INT_TICK != HREG_EV_TICK +#if HCF_EX_INT_TICK != HREG_EV_TICK ;? out dated checking err: someone redefined these macros while the implemenation assumes they are equal; #endif @@ -724,36 +687,36 @@ err: someone redefined these macros while the implemenation assumes they are equ #define HCFASSERT(x,q) {if (!(x)) {mdd_assert( ifbp, __LINE__ , q );}} #define MMDASSERT(x,q) {if (!(x)) {mdd_assert( assert_ifbp, __LINE__ + FILE_NAME_OFFSET, q );}} -#define HCFLOGENTRY( where, what ) \ -{if ( (ifbp->IFB_AssertWhere = where) <= 15 ) { \ - HCF_ENTRY( ifbp ); \ - HCFASSERT( (ifbp->IFB_AssertTrace & 1<<((where)&0xF)) == 0, ifbp->IFB_AssertTrace ); \ - ifbp->IFB_AssertTrace |= 1<<((where)&0xF); \ - } \ -HCFTRACE(ifbp, where ) \ -HCFTRACEVALUE(ifbp, what ) \ -} - -#define HCFLOGEXIT( where ) \ -{if ( (ifbp->IFB_AssertWhere = where) <= 15 ) { \ - HCF_EXIT( ifbp ); \ - ifbp->IFB_AssertTrace &= ~(1<<((where)&0xF)); \ - } \ -HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \ -} +#define HCFLOGENTRY( where, what ) \ + {if ( (ifbp->IFB_AssertWhere = where) <= 15 ) { \ + HCF_ENTRY( ifbp ); \ + HCFASSERT( (ifbp->IFB_AssertTrace & 1<<((where)&0xF)) == 0, ifbp->IFB_AssertTrace ); \ + ifbp->IFB_AssertTrace |= 1<<((where)&0xF); \ + } \ + HCFTRACE(ifbp, where ) \ + HCFTRACEVALUE(ifbp, what ) \ + } + +#define HCFLOGEXIT( where ) \ + {if ( (ifbp->IFB_AssertWhere = where) <= 15 ) { \ + HCF_EXIT( ifbp ); \ + ifbp->IFB_AssertTrace &= ~(1<<((where)&0xF)); \ + } \ + HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \ + } #else // HCF_ASSERT #define HCFASSERT( x, q ) #define MMDASSERT( x, q ) -#define HCFLOGENTRY( where, what ) {HCF_ENTRY( ifbp );} -#define HCFLOGEXIT( where ) {HCF_EXIT( ifbp );} +#define HCFLOGENTRY( where, what ) {HCF_ENTRY( ifbp );} +#define HCFLOGEXIT( where ) {HCF_EXIT( ifbp );} #endif // HCF_ASSERT #if HCF_INT_ON /* ;? HCFASSERT_INT * #if (HCF_SLEEP) & HCF_DDS * #define HCFASSERT_INT HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFF && ifbp->IFB_IntOffCnt != 0xFFFE, \ - * ifbp->IFB_IntOffCnt ) + * ifbp->IFB_IntOffCnt ) * #else */ #define HCFASSERT_INT HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFF, ifbp->IFB_IntOffCnt ) @@ -764,8 +727,8 @@ HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \ #if defined HCF_TRACE -#define HCFTRACE(ifbp, where ) {OPW( HREG_SW_1, where );} -//#define HCFTRACE(ifbp, where ) {HCFASSERT( DO_ASSERT, where );} +#define HCFTRACE(ifbp, where ) {OPW( HREG_SW_1, where );} +//#define HCFTRACE(ifbp, where ) {HCFASSERT( DO_ASSERT, where );} #define HCFTRACEVALUE(ifbp, what ) {OPW( HREG_SW_2, what );} //#define HCFTRACEVALUE(ifbp, what ) {HCFASSERT( DO_ASSERT, what );} #else @@ -775,7 +738,7 @@ HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \ #if HCF_BIG_ENDIAN -#define BE_PAR(x) ,x +#define BE_PAR(x) ,x #else #define BE_PAR(x) #endif // HCF_BIG_ENDIAN @@ -789,13 +752,13 @@ HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \ /************************************************************************************************/ #if HCF_ASSERT -extern IFBP BASED assert_ifbp; //to make asserts easily work under MMD and DHF -EXTERN_C void mdd_assert (IFBP ifbp, unsigned int line_number, hcf_32 q ); +extern IFBP BASED assert_ifbp; //to make asserts easily work under MMD and DHF +EXTERN_C void mdd_assert (IFBP ifbp, unsigned int line_number, hcf_32 q ); #endif //HCF_ASSERT -#if ! ( (HCF_IO) & HCF_IO_32BITS ) // defined 16 bits only +#if ! ( (HCF_IO) & HCF_IO_32BITS ) // defined 16 bits only #undef OUT_PORT_STRING_32 #undef IN_PORT_STRING_32 #endif // HCF_IO -#endif //HCFDEFC_H +#endif //HCFDEFC_H