diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 60b44285250d3b3e9e580f9d71e51239df3b1c76..4fa11af3d378ef281e43717490c012263b901122 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -20,6 +20,7 @@ Required properties:
 	"allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23
 	"allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
 	"allwinner,sun4i-a10-ahb-clk" - for the AHB clock
+	"allwinner,sun5i-a13-ahb-clk" - for the AHB clock on A13
 	"allwinner,sun9i-a80-ahb-clk" - for the AHB bus clocks on A80
 	"allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10
 	"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
@@ -66,6 +67,8 @@ Required properties:
 	"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
 	"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
 	"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
+	"allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
+	"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
 
 Required properties for all clocks:
 - reg : shall be the control register address for the clock.
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index 3a5292e3fcf8086f6418c8dceae6c59aab79b082..058f273d6154745d0fc4173677ee533cbd04a243 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -9,6 +9,7 @@ obj-y += clk-mod0.o
 obj-y += clk-sun8i-mbus.o
 obj-y += clk-sun9i-core.o
 obj-y += clk-sun9i-mmc.o
+obj-y += clk-usb.o
 
 obj-$(CONFIG_MFD_SUN6I_PRCM) += \
 	clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 379324eb5486e1b332d19fcf66fc8d7a0c4aff15..7e1e2bd189b6a6f6f3c0047d6b3f4d6b5899c3c6 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -481,6 +481,45 @@ static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate,
 	*n = DIV_ROUND_UP(div, (*k+1)) - 1;
 }
 
+/**
+ * sun5i_a13_get_ahb_factors() - calculates m, p factors for AHB
+ * AHB rate is calculated as follows
+ * rate = parent_rate >> p
+ */
+
+static void sun5i_a13_get_ahb_factors(u32 *freq, u32 parent_rate,
+				       u8 *n, u8 *k, u8 *m, u8 *p)
+{
+	u32 div;
+
+	/* divide only */
+	if (parent_rate < *freq)
+		*freq = parent_rate;
+
+	/*
+	 * user manual says valid speed is 8k ~ 276M, but tests show it
+	 * can work at speeds up to 300M, just after reparenting to pll6
+	 */
+	if (*freq < 8000)
+		*freq = 8000;
+	if (*freq > 300000000)
+		*freq = 300000000;
+
+	div = order_base_2(DIV_ROUND_UP(parent_rate, *freq));
+
+	/* p = 0 ~ 3 */
+	if (div > 3)
+		div = 3;
+
+	*freq = parent_rate >> div;
+
+	/* we were called to round the frequency, we can now return */
+	if (p == NULL)
+		return;
+
+	*p = div;
+}
+
 /**
  * sun4i_get_apb1_factors() - calculates m, p factors for APB1
  * APB1 rate is calculated as follows
@@ -616,6 +655,11 @@ static struct clk_factors_config sun6i_a31_pll6_config = {
 	.n_start = 1,
 };
 
+static struct clk_factors_config sun5i_a13_ahb_config = {
+	.pshift = 4,
+	.pwidth = 2,
+};
+
 static struct clk_factors_config sun4i_apb1_config = {
 	.mshift = 0,
 	.mwidth = 5,
@@ -676,6 +720,13 @@ static const struct factors_data sun6i_a31_pll6_data __initconst = {
 	.name = "pll6x2",
 };
 
+static const struct factors_data sun5i_a13_ahb_data __initconst = {
+	.mux = 6,
+	.muxmask = BIT(1) | BIT(0),
+	.table = &sun5i_a13_ahb_config,
+	.getter = sun5i_a13_get_ahb_factors,
+};
+
 static const struct factors_data sun4i_apb1_data __initconst = {
 	.mux = 24,
 	.muxmask = BIT(1) | BIT(0),
@@ -837,59 +888,6 @@ static void __init sunxi_divider_clk_setup(struct device_node *node,
 
 
 
-/**
- * sunxi_gates_reset... - reset bits in leaf gate clk registers handling
- */
-
-struct gates_reset_data {
-	void __iomem			*reg;
-	spinlock_t			*lock;
-	struct reset_controller_dev	rcdev;
-};
-
-static int sunxi_gates_reset_assert(struct reset_controller_dev *rcdev,
-			      unsigned long id)
-{
-	struct gates_reset_data *data = container_of(rcdev,
-						     struct gates_reset_data,
-						     rcdev);
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(data->lock, flags);
-
-	reg = readl(data->reg);
-	writel(reg & ~BIT(id), data->reg);
-
-	spin_unlock_irqrestore(data->lock, flags);
-
-	return 0;
-}
-
-static int sunxi_gates_reset_deassert(struct reset_controller_dev *rcdev,
-				unsigned long id)
-{
-	struct gates_reset_data *data = container_of(rcdev,
-						     struct gates_reset_data,
-						     rcdev);
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(data->lock, flags);
-
-	reg = readl(data->reg);
-	writel(reg | BIT(id), data->reg);
-
-	spin_unlock_irqrestore(data->lock, flags);
-
-	return 0;
-}
-
-static struct reset_control_ops sunxi_gates_reset_ops = {
-	.assert		= sunxi_gates_reset_assert,
-	.deassert	= sunxi_gates_reset_deassert,
-};
-
 /**
  * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks
  */
@@ -898,7 +896,6 @@ static struct reset_control_ops sunxi_gates_reset_ops = {
 
 struct gates_data {
 	DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE);
-	u32 reset_mask;
 };
 
 static const struct gates_data sun4i_axi_gates_data __initconst = {
@@ -997,26 +994,10 @@ static const struct gates_data sun8i_a23_apb2_gates_data __initconst = {
 	.mask = {0x1F0007},
 };
 
-static const struct gates_data sun4i_a10_usb_gates_data __initconst = {
-	.mask = {0x1C0},
-	.reset_mask = 0x07,
-};
-
-static const struct gates_data sun5i_a13_usb_gates_data __initconst = {
-	.mask = {0x140},
-	.reset_mask = 0x03,
-};
-
-static const struct gates_data sun6i_a31_usb_gates_data __initconst = {
-	.mask = { BIT(18) | BIT(17) | BIT(16) | BIT(10) | BIT(9) | BIT(8) },
-	.reset_mask = BIT(2) | BIT(1) | BIT(0),
-};
-
 static void __init sunxi_gates_clk_setup(struct device_node *node,
 					 struct gates_data *data)
 {
 	struct clk_onecell_data *clk_data;
-	struct gates_reset_data *reset_data;
 	const char *clk_parent;
 	const char *clk_name;
 	void __iomem *reg;
@@ -1057,21 +1038,6 @@ static void __init sunxi_gates_clk_setup(struct device_node *node,
 	clk_data->clk_num = i;
 
 	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-
-	/* Register a reset controler for gates with reset bits */
-	if (data->reset_mask == 0)
-		return;
-
-	reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL);
-	if (!reset_data)
-		return;
-
-	reset_data->reg = reg;
-	reset_data->lock = &clk_lock;
-	reset_data->rcdev.nr_resets = __fls(data->reset_mask) + 1;
-	reset_data->rcdev.ops = &sunxi_gates_reset_ops;
-	reset_data->rcdev.of_node = node;
-	reset_controller_register(&reset_data->rcdev);
 }
 
 
@@ -1080,13 +1046,20 @@ static void __init sunxi_gates_clk_setup(struct device_node *node,
  * sunxi_divs_clk_setup() helper data
  */
 
-#define SUNXI_DIVS_MAX_QTY	2
+#define SUNXI_DIVS_MAX_QTY	4
 #define SUNXI_DIVISOR_WIDTH	2
 
 struct divs_data {
 	const struct factors_data *factors; /* data for the factor clock */
-	int ndivs; /* number of children */
+	int ndivs; /* number of outputs */
+	/*
+	 * List of outputs. Refer to the diagram for sunxi_divs_clk_setup():
+	 * self or base factor clock refers to the output from the pll
+	 * itself. The remaining refer to fixed or configurable divider
+	 * outputs.
+	 */
 	struct {
+		u8 self; /* is it the base factor clock? (only one) */
 		u8 fixed; /* is it a fixed divisor? if not... */
 		struct clk_div_table *table; /* is it a table based divisor? */
 		u8 shift; /* otherwise it's a normal divisor with this shift */
@@ -1109,23 +1082,27 @@ static const struct divs_data pll5_divs_data __initconst = {
 	.div = {
 		{ .shift = 0, .pow = 0, }, /* M, DDR */
 		{ .shift = 16, .pow = 1, }, /* P, other */
+		/* No output for the base factor clock */
 	}
 };
 
 static const struct divs_data pll6_divs_data __initconst = {
 	.factors = &sun4i_pll6_data,
-	.ndivs = 2,
+	.ndivs = 4,
 	.div = {
 		{ .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */
 		{ .fixed = 2 }, /* P, other */
+		{ .self = 1 }, /* base factor clock, 2x */
+		{ .fixed = 4 }, /* pll6 / 4, used as ahb input */
 	}
 };
 
 static const struct divs_data sun6i_a31_pll6_divs_data __initconst = {
 	.factors = &sun6i_a31_pll6_data,
-	.ndivs = 1,
+	.ndivs = 2,
 	.div = {
 		{ .fixed = 2 }, /* normal output */
+		{ .self = 1 }, /* base factor clock, 2x */
 	}
 };
 
@@ -1156,6 +1133,10 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
 	int ndivs = SUNXI_DIVS_MAX_QTY, i = 0;
 	int flags, clkflags;
 
+	/* if number of children known, use it */
+	if (data->ndivs)
+		ndivs = data->ndivs;
+
 	/* Set up factor clock that we will be dividing */
 	pclk = sunxi_factors_clk_setup(node, data->factors);
 	parent = __clk_get_name(pclk);
@@ -1166,7 +1147,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
 	if (!clk_data)
 		return;
 
-	clks = kzalloc((SUNXI_DIVS_MAX_QTY+1) * sizeof(*clks), GFP_KERNEL);
+	clks = kcalloc(ndivs, sizeof(*clks), GFP_KERNEL);
 	if (!clks)
 		goto free_clkdata;
 
@@ -1176,15 +1157,17 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
 	 * our RAM clock! */
 	clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT;
 
-	/* if number of children known, use it */
-	if (data->ndivs)
-		ndivs = data->ndivs;
-
 	for (i = 0; i < ndivs; i++) {
 		if (of_property_read_string_index(node, "clock-output-names",
 						  i, &clk_name) != 0)
 			break;
 
+		/* If this is the base factor clock, only update clks */
+		if (data->div[i].self) {
+			clk_data->clks[i] = pclk;
+			continue;
+		}
+
 		gate_hw = NULL;
 		rate_hw = NULL;
 		rate_ops = NULL;
@@ -1243,9 +1226,6 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
 		clk_register_clkdev(clks[i], clk_name, NULL);
 	}
 
-	/* The last clock available on the getter is the parent */
-	clks[i++] = pclk;
-
 	/* Adjust to the real max */
 	clk_data->clk_num = i;
 
@@ -1269,6 +1249,7 @@ static const struct of_device_id clk_factors_match[] __initconst = {
 	{.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
 	{.compatible = "allwinner,sun8i-a23-pll1-clk", .data = &sun8i_a23_pll1_data,},
 	{.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,},
+	{.compatible = "allwinner,sun5i-a13-ahb-clk", .data = &sun5i_a13_ahb_data,},
 	{.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,},
 	{.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,},
 	{}
@@ -1324,9 +1305,6 @@ static const struct of_device_id clk_gates_match[] __initconst = {
 	{.compatible = "allwinner,sun9i-a80-apb1-gates-clk", .data = &sun9i_a80_apb1_gates_data,},
 	{.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,},
 	{.compatible = "allwinner,sun8i-a23-apb2-gates-clk", .data = &sun8i_a23_apb2_gates_data,},
-	{.compatible = "allwinner,sun4i-a10-usb-clk", .data = &sun4i_a10_usb_gates_data,},
-	{.compatible = "allwinner,sun5i-a13-usb-clk", .data = &sun5i_a13_usb_gates_data,},
-	{.compatible = "allwinner,sun6i-a31-usb-clk", .data = &sun6i_a31_usb_gates_data,},
 	{}
 };
 
@@ -1348,15 +1326,15 @@ static void __init sunxi_init_clocks(const char *clocks[], int nclocks)
 {
 	unsigned int i;
 
+	/* Register divided output clocks */
+	of_sunxi_table_clock_setup(clk_divs_match, sunxi_divs_clk_setup);
+
 	/* Register factor clocks */
 	of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup);
 
 	/* Register divider clocks */
 	of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup);
 
-	/* Register divided output clocks */
-	of_sunxi_table_clock_setup(clk_divs_match, sunxi_divs_clk_setup);
-
 	/* Register mux clocks */
 	of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup);
 
@@ -1385,6 +1363,7 @@ static void __init sun4i_a10_init_clocks(struct device_node *node)
 CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sun4i_a10_init_clocks);
 
 static const char *sun5i_critical_clocks[] __initdata = {
+	"cpu",
 	"pll5_ddr",
 	"ahb_sdram",
 };
diff --git a/drivers/clk/sunxi/clk-usb.c b/drivers/clk/sunxi/clk-usb.c
new file mode 100644
index 0000000000000000000000000000000000000000..a86ed2f8d7af85faa09c0363a3d288b2af228fab
--- /dev/null
+++ b/drivers/clk/sunxi/clk-usb.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2013-2015 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+
+
+/**
+ * sunxi_usb_reset... - reset bits in usb clk registers handling
+ */
+
+struct usb_reset_data {
+	void __iomem			*reg;
+	spinlock_t			*lock;
+	struct clk			*clk;
+	struct reset_controller_dev	rcdev;
+};
+
+static int sunxi_usb_reset_assert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct usb_reset_data *data = container_of(rcdev,
+						   struct usb_reset_data,
+						   rcdev);
+	unsigned long flags;
+	u32 reg;
+
+	clk_prepare_enable(data->clk);
+	spin_lock_irqsave(data->lock, flags);
+
+	reg = readl(data->reg);
+	writel(reg & ~BIT(id), data->reg);
+
+	spin_unlock_irqrestore(data->lock, flags);
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static int sunxi_usb_reset_deassert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct usb_reset_data *data = container_of(rcdev,
+						     struct usb_reset_data,
+						     rcdev);
+	unsigned long flags;
+	u32 reg;
+
+	clk_prepare_enable(data->clk);
+	spin_lock_irqsave(data->lock, flags);
+
+	reg = readl(data->reg);
+	writel(reg | BIT(id), data->reg);
+
+	spin_unlock_irqrestore(data->lock, flags);
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static struct reset_control_ops sunxi_usb_reset_ops = {
+	.assert		= sunxi_usb_reset_assert,
+	.deassert	= sunxi_usb_reset_deassert,
+};
+
+/**
+ * sunxi_usb_clk_setup() - Setup function for usb gate clocks
+ */
+
+#define SUNXI_USB_MAX_SIZE 32
+
+struct usb_clk_data {
+	u32 clk_mask;
+	u32 reset_mask;
+	bool reset_needs_clk;
+};
+
+static void __init sunxi_usb_clk_setup(struct device_node *node,
+				       const struct usb_clk_data *data,
+				       spinlock_t *lock)
+{
+	struct clk_onecell_data *clk_data;
+	struct usb_reset_data *reset_data;
+	const char *clk_parent;
+	const char *clk_name;
+	void __iomem *reg;
+	int qty;
+	int i = 0;
+	int j = 0;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg))
+		return;
+
+	clk_parent = of_clk_get_parent_name(node, 0);
+	if (!clk_parent)
+		return;
+
+	/* Worst-case size approximation and memory allocation */
+	qty = find_last_bit((unsigned long *)&data->clk_mask,
+			    SUNXI_USB_MAX_SIZE);
+
+	clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->clks = kzalloc((qty+1) * sizeof(struct clk *), GFP_KERNEL);
+	if (!clk_data->clks) {
+		kfree(clk_data);
+		return;
+	}
+
+	for_each_set_bit(i, (unsigned long *)&data->clk_mask,
+			 SUNXI_USB_MAX_SIZE) {
+		of_property_read_string_index(node, "clock-output-names",
+					      j, &clk_name);
+		clk_data->clks[i] = clk_register_gate(NULL, clk_name,
+						      clk_parent, 0,
+						      reg, i, 0, lock);
+		WARN_ON(IS_ERR(clk_data->clks[i]));
+
+		j++;
+	}
+
+	/* Adjust to the real max */
+	clk_data->clk_num = i;
+
+	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	/* Register a reset controller for usb with reset bits */
+	if (data->reset_mask == 0)
+		return;
+
+	reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL);
+	if (!reset_data)
+		return;
+
+	if (data->reset_needs_clk) {
+		reset_data->clk = of_clk_get(node, 0);
+		if (IS_ERR(reset_data->clk)) {
+			pr_err("Could not get clock for reset controls\n");
+			kfree(reset_data);
+			return;
+		}
+	}
+
+	reset_data->reg = reg;
+	reset_data->lock = lock;
+	reset_data->rcdev.nr_resets = __fls(data->reset_mask) + 1;
+	reset_data->rcdev.ops = &sunxi_usb_reset_ops;
+	reset_data->rcdev.of_node = node;
+	reset_controller_register(&reset_data->rcdev);
+}
+
+static const struct usb_clk_data sun4i_a10_usb_clk_data __initconst = {
+	.clk_mask = BIT(8) | BIT(7) | BIT(6),
+	.reset_mask = BIT(2) | BIT(1) | BIT(0),
+};
+
+static DEFINE_SPINLOCK(sun4i_a10_usb_lock);
+
+static void __init sun4i_a10_usb_setup(struct device_node *node)
+{
+	sunxi_usb_clk_setup(node, &sun4i_a10_usb_clk_data, &sun4i_a10_usb_lock);
+}
+CLK_OF_DECLARE(sun4i_a10_usb, "allwinner,sun4i-a10-usb-clk", sun4i_a10_usb_setup);
+
+static const struct usb_clk_data sun5i_a13_usb_clk_data __initconst = {
+	.clk_mask = BIT(8) | BIT(6),
+	.reset_mask = BIT(1) | BIT(0),
+};
+
+static void __init sun5i_a13_usb_setup(struct device_node *node)
+{
+	sunxi_usb_clk_setup(node, &sun5i_a13_usb_clk_data, &sun4i_a10_usb_lock);
+}
+CLK_OF_DECLARE(sun5i_a13_usb, "allwinner,sun5i-a13-usb-clk", sun5i_a13_usb_setup);
+
+static const struct usb_clk_data sun6i_a31_usb_clk_data __initconst = {
+	.clk_mask = BIT(18) | BIT(17) | BIT(16) | BIT(10) | BIT(9) | BIT(8),
+	.reset_mask = BIT(2) | BIT(1) | BIT(0),
+};
+
+static void __init sun6i_a31_usb_setup(struct device_node *node)
+{
+	sunxi_usb_clk_setup(node, &sun6i_a31_usb_clk_data, &sun4i_a10_usb_lock);
+}
+CLK_OF_DECLARE(sun6i_a31_usb, "allwinner,sun6i-a31-usb-clk", sun6i_a31_usb_setup);
+
+static const struct usb_clk_data sun9i_a80_usb_mod_data __initconst = {
+	.clk_mask = BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1),
+	.reset_mask = BIT(19) | BIT(18) | BIT(17),
+	.reset_needs_clk = 1,
+};
+
+static DEFINE_SPINLOCK(a80_usb_mod_lock);
+
+static void __init sun9i_a80_usb_mod_setup(struct device_node *node)
+{
+	sunxi_usb_clk_setup(node, &sun9i_a80_usb_mod_data, &a80_usb_mod_lock);
+}
+CLK_OF_DECLARE(sun9i_a80_usb_mod, "allwinner,sun9i-a80-usb-mod-clk", sun9i_a80_usb_mod_setup);
+
+static const struct usb_clk_data sun9i_a80_usb_phy_data __initconst = {
+	.clk_mask = BIT(10) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1),
+	.reset_mask = BIT(21) | BIT(20) | BIT(19) | BIT(18) | BIT(17),
+	.reset_needs_clk = 1,
+};
+
+static DEFINE_SPINLOCK(a80_usb_phy_lock);
+
+static void __init sun9i_a80_usb_phy_setup(struct device_node *node)
+{
+	sunxi_usb_clk_setup(node, &sun9i_a80_usb_phy_data, &a80_usb_phy_lock);
+}
+CLK_OF_DECLARE(sun9i_a80_usb_phy, "allwinner,sun9i-a80-usb-phy-clk", sun9i_a80_usb_phy_setup);