From fc8f2a7608d855b911e35a33e771e6358c705c43 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Mon, 6 Sep 2010 23:27:09 +0800 Subject: [PATCH] USB: otg: twl4030: fix phy initialization(v1) Commit 461c317705eca5cac09a360f488715927fd0a927(into 2.6.36-v3) is put forward to power down phy if no usb cable is connected, but does introduce the two issues below: 1), phy is not into work state if usb cable is connected with PC during poweron, so musb device mode is not usable in such case, follows the reasons: -twl4030_phy_resume is not called, so regulators are not enabled i2c access are not enabled usb mode not configurated 2), The kernel warings[1] of regulators 'unbalanced disables' is caused if poweron without usb cable connected with PC or b-device. This patch fixes the two issues above: -power down phy only if no usb cable is connected with PC and b-device -do phy initialization(via __twl4030_phy_resume) if usb cable is connected with PC(vbus event) or another b-device(ID event) in twl4030_usb_probe. This patch also doesn't put VUSB3V1 LDO into active mode in twl4030_usb_ldo_init until VBUS/ID change detected, so we can save more power consumption than before. This patch is verified OK on Beagle board either connected with usb cable or not when poweron. [1]. warnings of 'unbalanced disables' of regulators. [root@OMAP3EVM /]# dmesg ------------[ cut here ]------------ WARNING: at drivers/regulator/core.c:1357 _regulator_disable+0x38/0x128() unbalanced disables for VUSB1V8 Modules linked in: Backtrace: [] (dump_backtrace+0x0/0x110) from [] (dump_stack+0x18/0x1c) r7:c78179d8 r6:c01ed6b8 r5:c0410822 r4:0000054d [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x54/0x6c) [] (warn_slowpath_common+0x0/0x6c) from [] (warn_slowpath_fmt+0x38/0x40) r9:00000000 r8:00000000 r7:c78e6608 r6:00000000 r5:fffffffb r4:c78e6c00 [] (warn_slowpath_fmt+0x0/0x40) from [] (_regulator_disable+0x38/0x128) r3:c0410e53 r2:c0410ad5 [] (_regulator_disable+0x0/0x128) from [] (regulator_disable+0x24/0x38) r7:c78e6608 r6:00000000 r5:c78e6c40 r4:c78e6c00 [] (regulator_disable+0x0/0x38) from [] (twl4030_phy_power+0x15c/0x17c) r5:c78595c0 r4:00000000 [] (twl4030_phy_power+0x0/0x17c) from [] (twl4030_phy_suspend+0x20/0x2c) r6:00000000 r5:c78595c0 r4:c78595c0 [] (twl4030_phy_suspend+0x0/0x2c) from [] (twl4030_usb_irq+0x11c/0x16c) r5:c78595c0 r4:00000040 [] (twl4030_usb_irq+0x0/0x16c) from [] (twl4030_usb_probe+0x2c4/0x32c) r6:00000000 r5:00000000 r4:c78595c0 [] (twl4030_usb_probe+0x0/0x32c) from [] (platform_drv_probe+0x20/0x24) r7:00000000 r6:c047d49c r5:c78e6608 r4:c047d49c [] (platform_drv_probe+0x0/0x24) from [] (driver_probe_device+0xd0/0x190) [] (driver_probe_device+0x0/0x190) from [] (__device_attach+0x44/0x48) r7:00000000 r6:c78e6608 r5:c78e6608 r4:c047d49c [] (__device_attach+0x0/0x48) from [] (bus_for_each_drv+0x50/0x90) r5:c0214390 r4:00000000 [] (bus_for_each_drv+0x0/0x90) from [] (device_attach+0x70/0x94) r6:c78e663c r5:c78e6608 r4:c78e6608 [] (device_attach+0x0/0x94) from [] (bus_probe_device+0x2c/0x48) r7:00000000 r6:00000002 r5:c78e6608 r4:c78e6600 [] (bus_probe_device+0x0/0x48) from [] (device_add+0x340/0x4b4) [] (device_add+0x0/0x4b4) from [] (platform_device_add+0x110/0x16c) [] (platform_device_add+0x0/0x16c) from [] (add_numbered_child+0xd8/0x118) r7:00000000 r6:c045f15c r5:c78e6600 r4:00000000 [] (add_numbered_child+0x0/0x118) from [] (twl_probe+0x3a4/0x72c) [] (twl_probe+0x0/0x72c) from [] (i2c_device_probe+0x7c/0xa4) [] (i2c_device_probe+0x0/0xa4) from [] (driver_probe_device+0xd0/0x190) r5:c7856e20 r4:c047c860 [] (driver_probe_device+0x0/0x190) from [] (__device_attach+0x44/0x48) r7:c7856e04 r6:c7856e20 r5:c7856e20 r4:c047c860 [] (__device_attach+0x0/0x48) from [] (bus_for_each_drv+0x50/0x90) r5:c0214390 r4:00000000 [] (bus_for_each_drv+0x0/0x90) from [] (device_attach+0x70/0x94) r6:c7856e54 r5:c7856e20 r4:c7856e20 [] (device_attach+0x0/0x94) from [] (bus_probe_device+0x2c/0x48) r7:c7856e04 r6:c78fd048 r5:c7856e20 r4:c7856e20 [] (bus_probe_device+0x0/0x48) from [] (device_add+0x340/0x4b4) [] (device_add+0x0/0x4b4) from [] (device_register+0x1c/0x20) [] (device_register+0x0/0x20) from [] (i2c_new_device+0xec/0x150) r5:c7856e00 r4:c7856e20 [] (i2c_new_device+0x0/0x150) from [] (i2c_register_adapter+0xa0/0x1c4) r7:00000000 r6:c78fd078 r5:c78fd048 r4:c781d5c0 [] (i2c_register_adapter+0x0/0x1c4) from [] (i2c_add_numbered_adapter+0x9c/0xb4) r7:00000a28 r6:c04600a8 r5:c78fd048 r4:00000000 [] (i2c_add_numbered_adapter+0x0/0xb4) from [] (omap_i2c_probe+0x324/0x3e8) r5:00000000 r4:c78fd000 [] (omap_i2c_probe+0x0/0x3e8) from [] (platform_drv_probe+0x20/0x24) [] (platform_drv_probe+0x0/0x24) from [] (driver_probe_device+0xd0/0x190) [] (driver_probe_device+0x0/0x190) from [] (__driver_attach+0x68/0x8c) r7:c78b2140 r6:c047e214 r5:c04600e4 r4:c04600b0 [] (__driver_attach+0x0/0x8c) from [] (bus_for_each_dev+0x50/0x84) r7:c78b2140 r6:c047e214 r5:c0214304 r4:00000000 [] (bus_for_each_dev+0x0/0x84) from [] (driver_attach+0x20/0x28) r6:c047e214 r5:c047e214 r4:c00270d0 [] (driver_attach+0x0/0x28) from [] (bus_add_driver+0xa8/0x228) [] (bus_add_driver+0x0/0x228) from [] (driver_register+0xb0/0x13c) [] (driver_register+0x0/0x13c) from [] (platform_driver_register+0x4c/0x60) r9:00000000 r8:c001f688 r7:00000013 r6:c005b6fc r5:c00083dc r4:c00270d0 [] (platform_driver_register+0x0/0x60) from [] (omap_i2c_init_driver+0x14/0x1c) [] (omap_i2c_init_driver+0x0/0x1c) from [] (do_one_initcall+0xd0/0x1a4) [] (do_one_initcall+0x0/0x1a4) from [] (kernel_init+0x9c/0x154) [] (kernel_init+0x0/0x154) from [] (do_exit+0x0/0x688) r5:c00083dc r4:00000000 ---[ end trace 1b75b31a2719ed1d ]--- Signed-off-by: Ming Lei Cc: David Brownell Cc: Felipe Balbi Cc: Anand Gadiyar Cc: Mike Frysinger Cc: Sergei Shtylyov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/twl4030-usb.c | 78 +++++++++++++++++++++++------------ 1 file changed, 51 insertions(+), 27 deletions(-) diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 05aaac1c3861..0bc97698af15 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -347,11 +347,20 @@ static void twl4030_i2c_access(struct twl4030_usb *twl, int on) } } -static void twl4030_phy_power(struct twl4030_usb *twl, int on) +static void __twl4030_phy_power(struct twl4030_usb *twl, int on) { - u8 pwr; + u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); + + if (on) + pwr &= ~PHY_PWR_PHYPWD; + else + pwr |= PHY_PWR_PHYPWD; - pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); +} + +static void twl4030_phy_power(struct twl4030_usb *twl, int on) +{ if (on) { regulator_enable(twl->usb3v1); regulator_enable(twl->usb1v8); @@ -365,15 +374,13 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); regulator_enable(twl->usb1v5); - pwr &= ~PHY_PWR_PHYPWD; - WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); + __twl4030_phy_power(twl, 1); twl4030_usb_write(twl, PHY_CLK_CTRL, twl4030_usb_read(twl, PHY_CLK_CTRL) | (PHY_CLK_CTRL_CLOCKGATING_EN | PHY_CLK_CTRL_CLK32K_EN)); - } else { - pwr |= PHY_PWR_PHYPWD; - WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); + } else { + __twl4030_phy_power(twl, 0); regulator_disable(twl->usb1v5); regulator_disable(twl->usb1v8); regulator_disable(twl->usb3v1); @@ -387,19 +394,25 @@ static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off) twl4030_phy_power(twl, 0); twl->asleep = 1; + dev_dbg(twl->dev, "%s\n", __func__); } -static void twl4030_phy_resume(struct twl4030_usb *twl) +static void __twl4030_phy_resume(struct twl4030_usb *twl) { - if (!twl->asleep) - return; - twl4030_phy_power(twl, 1); twl4030_i2c_access(twl, 1); twl4030_usb_set_mode(twl, twl->usb_mode); if (twl->usb_mode == T2_USB_MODE_ULPI) twl4030_i2c_access(twl, 0); +} + +static void twl4030_phy_resume(struct twl4030_usb *twl) +{ + if (!twl->asleep) + return; + __twl4030_phy_resume(twl); twl->asleep = 0; + dev_dbg(twl->dev, "%s\n", __func__); } static int twl4030_usb_ldo_init(struct twl4030_usb *twl) @@ -408,8 +421,8 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl) twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY); twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY); - /* put VUSB3V1 LDO in active state */ - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); + /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/ + /*twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/ /* input to VUSB3V1 LDO is from VBAT, not VBUS */ twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); @@ -502,6 +515,26 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) return IRQ_HANDLED; } +static void twl4030_usb_phy_init(struct twl4030_usb *twl) +{ + int status; + + status = twl4030_usb_linkstat(twl); + if (status >= 0) { + if (status == USB_EVENT_NONE) { + __twl4030_phy_power(twl, 0); + twl->asleep = 1; + } else { + __twl4030_phy_resume(twl); + twl->asleep = 0; + } + + blocking_notifier_call_chain(&twl->otg.notifier, status, + twl->otg.gadget); + } + sysfs_notify(&twl->dev->kobj, NULL, "vbus"); +} + static int twl4030_set_suspend(struct otg_transceiver *x, int suspend) { struct twl4030_usb *twl = xceiv_to_twl(x); @@ -550,7 +583,6 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) struct twl4030_usb_data *pdata = pdev->dev.platform_data; struct twl4030_usb *twl; int status, err; - u8 pwr; if (!pdata) { dev_dbg(&pdev->dev, "platform_data not available\n"); @@ -569,10 +601,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) twl->otg.set_peripheral = twl4030_set_peripheral; twl->otg.set_suspend = twl4030_set_suspend; twl->usb_mode = pdata->usb_mode; - - pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); - - twl->asleep = (pwr & PHY_PWR_PHYPWD); + twl->asleep = 1; /* init spinlock for workqueue */ spin_lock_init(&twl->lock); @@ -610,15 +639,10 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) return status; } - /* The IRQ handler just handles changes from the previous states - * of the ID and VBUS pins ... in probe() we must initialize that - * previous state. The easy way: fake an IRQ. - * - * REVISIT: a real IRQ might have happened already, if PREEMPT is - * enabled. Else the IRQ may not yet be configured or enabled, - * because of scheduling delays. + /* Power down phy or make it work according to + * current link state. */ - twl4030_usb_irq(twl->irq, twl); + twl4030_usb_phy_init(twl); dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); return 0; -- GitLab