提交 f860ee26 编写于 作者: N Nick Kossifidis 提交者: John W. Linville

ath5k: Update phy calibration functions

 * Enable I/Q calibration each time we have correction results (we
   were only enabling calibration during reset). If we don't we commit
   the same results each time calibration routine is called.
 * Add some documentation and a TODO on nf calibration
 * Return -EAGAIN on noise floor timeout/failure

Changes-licensed-under: ISC
Signed-off-by: NNick Kossifidis <mickflemm@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 cc6323c7
...@@ -2052,6 +2052,8 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) ...@@ -2052,6 +2052,8 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
* http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL \ * http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL \
* &p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7245893.PN.&OS=PN/7 * &p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7245893.PN.&OS=PN/7
* *
* XXX: Since during noise floor calibration antennas are detached according to
* the patent, we should stop tx queues here.
*/ */
int int
ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
...@@ -2061,7 +2063,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) ...@@ -2061,7 +2063,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
s32 noise_floor; s32 noise_floor;
/* /*
* Enable noise floor calibration and wait until completion * Enable noise floor calibration
*/ */
AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
AR5K_PHY_AGCCTL_NF); AR5K_PHY_AGCCTL_NF);
...@@ -2071,7 +2073,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) ...@@ -2071,7 +2073,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
if (ret) { if (ret) {
ATH5K_ERR(ah->ah_sc, ATH5K_ERR(ah->ah_sc,
"noise floor calibration timeout (%uMHz)\n", freq); "noise floor calibration timeout (%uMHz)\n", freq);
return ret; return -EAGAIN;
} }
/* Wait until the noise floor is calibrated and read the value */ /* Wait until the noise floor is calibrated and read the value */
...@@ -2093,7 +2095,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) ...@@ -2093,7 +2095,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
if (noise_floor > AR5K_TUNE_NOISE_FLOOR) { if (noise_floor > AR5K_TUNE_NOISE_FLOOR) {
ATH5K_ERR(ah->ah_sc, ATH5K_ERR(ah->ah_sc,
"noise floor calibration failed (%uMHz)\n", freq); "noise floor calibration failed (%uMHz)\n", freq);
return -EIO; return -EAGAIN;
} }
ah->ah_noise_floor = noise_floor; ah->ah_noise_floor = noise_floor;
...@@ -2206,38 +2208,66 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, ...@@ -2206,38 +2208,66 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
} }
/* /*
* Perform a PHY calibration on RF5111/5112 * Perform a PHY calibration on RF5111/5112 and newer chips
*/ */
static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah,
struct ieee80211_channel *channel) struct ieee80211_channel *channel)
{ {
u32 i_pwr, q_pwr; u32 i_pwr, q_pwr;
s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd; s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd;
int i;
ATH5K_TRACE(ah->ah_sc); ATH5K_TRACE(ah->ah_sc);
if (!ah->ah_calibration || if (!ah->ah_calibration ||
ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN)
goto done; goto done;
ah->ah_calibration = false; /* Calibration has finished, get the results and re-run */
for (i = 0; i <= 10; i++) {
iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR);
i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I);
q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q);
}
iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR);
i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I);
q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q);
i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7; i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7;
q_coffd = q_pwr >> 6; q_coffd = q_pwr >> 7;
/* No correction */
if (i_coffd == 0 || q_coffd == 0) if (i_coffd == 0 || q_coffd == 0)
goto done; goto done;
i_coff = ((-iq_corr) / i_coffd) & 0x3f; i_coff = ((-iq_corr) / i_coffd) & 0x3f;
q_coff = (((s32)i_pwr / q_coffd) - 64) & 0x1f;
/* Commit new IQ value */ /* Boundary check */
if (i_coff > 31)
i_coff = 31;
if (i_coff < -32)
i_coff = -32;
q_coff = (((s32)i_pwr / q_coffd) - 128) & 0x1f;
/* Boundary check */
if (q_coff > 15)
q_coff = 15;
if (q_coff < -16)
q_coff = -16;
/* Commit new I/Q value */
AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE | AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE |
((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S)); ((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S));
/* Re-enable calibration -if we don't we'll commit
* the same values again and again */
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_RUN);
done: done:
/* TODO: Separate noise floor calibration from I/Q calibration
* since noise floor calibration interrupts rx path while I/Q
* calibration doesn't. We don't need to run noise floor calibration
* as often as I/Q calibration.*/
ath5k_hw_noise_floor_calibration(ah, channel->center_freq); ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
/* Request RF gain */ /* Request RF gain */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册