From f6d6daaf9b5260f1769ed040caca53e1c087ca8b Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 26 Nov 2013 14:50:27 +0100 Subject: [PATCH] mfd: sec: Add PM ops and make it a wake up source Add PM suspend/resume ops to the sec MFD core driver and make it a wake up source. This allows proper waking from suspend to RAM and also fixes broken interrupts after resuming: [ 42.705703] sec_pmic 7-0066: Failed to read IRQ status: -5 Interrupts stop working after first resume initiated by them (e.g. by RTC Alarm interrupt) because interrupt registers were not cleared properly. When device is woken up from suspend by RTC Alarm, an interrupt occurs before resuming I2C bus controller. The interrupt is handled by regmap_irq_thread which tries to read RTC registers. This read fails (I2C is still suspended) and RTC Alarm interrupt is disabled. Disable the S5M8767 interrupts during suspend (disable_irq()) and enable them during resume so the device will be still woken up but the interrupt won't happen before resuming I2C bus. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kyungmin Park Signed-off-by: Lee Jones --- drivers/mfd/sec-core.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index b31824c33e15..cca0f990d287 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -323,6 +323,8 @@ static int sec_pmic_probe(struct i2c_client *i2c, if (ret) goto err; + device_init_wakeup(sec_pmic->dev, sec_pmic->wakeup); + return ret; err: @@ -341,6 +343,43 @@ static int sec_pmic_remove(struct i2c_client *i2c) return 0; } +static int sec_pmic_suspend(struct device *dev) +{ + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c); + + if (device_may_wakeup(dev)) { + enable_irq_wake(sec_pmic->irq); + /* + * PMIC IRQ must be disabled during suspend for RTC alarm + * to work properly. + * When device is woken up from suspend by RTC Alarm, an + * interrupt occurs before resuming I2C bus controller. + * The interrupt is handled by regmap_irq_thread which tries + * to read RTC registers. This read fails (I2C is still + * suspended) and RTC Alarm interrupt is disabled. + */ + disable_irq(sec_pmic->irq); + } + + return 0; +} + +static int sec_pmic_resume(struct device *dev) +{ + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c); + + if (device_may_wakeup(dev)) { + disable_irq_wake(sec_pmic->irq); + enable_irq(sec_pmic->irq); + } + + return 0; +} + +static SIMPLE_DEV_PM_OPS(sec_pmic_pm_ops, sec_pmic_suspend, sec_pmic_resume); + static const struct i2c_device_id sec_pmic_id[] = { { "sec_pmic", 0 }, { } @@ -351,6 +390,7 @@ static struct i2c_driver sec_pmic_driver = { .driver = { .name = "sec_pmic", .owner = THIS_MODULE, + .pm = &sec_pmic_pm_ops, .of_match_table = of_match_ptr(sec_dt_match), }, .probe = sec_pmic_probe, -- GitLab