diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 1c1b27c97e5cee3aa26138a1d5c6ebf8ba5f85c0..3778b238356b5fd864a493046a7a10a6fac549ee 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -203,6 +203,12 @@ struct drm_i915_display_funcs {
 	int (*get_display_clock_speed)(struct drm_device *dev);
 	int (*get_fifo_size)(struct drm_device *dev, int plane);
 	void (*update_wm)(struct drm_device *dev);
+	int (*crtc_mode_set)(struct drm_crtc *crtc,
+			     struct drm_display_mode *mode,
+			     struct drm_display_mode *adjusted_mode,
+			     int x, int y,
+			     struct drm_framebuffer *old_fb);
+
 	/* clock updates for mode set */
 	/* cursor updates */
 	/* render clock increase/decrease */
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a47e5ee5dcaaa2641d5f4a93883fa345996cb326..b62136764a2bb333f33c0b0021fb72fe8d518c2e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4516,11 +4516,659 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
 	return dev_priv->lvds_use_ssc && i915_panel_use_ssc;
 }
 
-static int intel_crtc_mode_set(struct drm_crtc *crtc,
-			       struct drm_display_mode *mode,
-			       struct drm_display_mode *adjusted_mode,
-			       int x, int y,
-			       struct drm_framebuffer *old_fb)
+static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
+			      struct drm_display_mode *mode,
+			      struct drm_display_mode *adjusted_mode,
+			      int x, int y,
+			      struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	u32 fp_reg, dpll_reg;
+	int refclk, num_connectors = 0;
+	intel_clock_t clock, reduced_clock;
+	u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf;
+	bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
+	bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+	struct intel_encoder *has_edp_encoder = NULL;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
+	const intel_limit_t *limit;
+	int ret;
+	struct fdi_m_n m_n = {0};
+	u32 reg, temp;
+	u32 lvds_sync = 0;
+	int target_clock;
+
+	drm_vblank_pre_modeset(dev, pipe);
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+		if (encoder->base.crtc != crtc)
+			continue;
+
+		switch (encoder->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_SDVO:
+		case INTEL_OUTPUT_HDMI:
+			is_sdvo = true;
+			if (encoder->needs_tv_clock)
+				is_tv = true;
+			break;
+		case INTEL_OUTPUT_DVO:
+			is_dvo = true;
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			is_tv = true;
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			is_crt = true;
+			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			is_dp = true;
+			break;
+		case INTEL_OUTPUT_EDP:
+			has_edp_encoder = encoder;
+			break;
+		}
+
+		num_connectors++;
+	}
+
+	if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
+		refclk = dev_priv->lvds_ssc_freq * 1000;
+		DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
+			      refclk / 1000);
+	} else if (!IS_GEN2(dev)) {
+		refclk = 96000;
+		if (HAS_PCH_SPLIT(dev) &&
+		    (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)))
+			refclk = 120000; /* 120Mhz refclk */
+	} else {
+		refclk = 48000;
+	}
+
+	/*
+	 * Returns a set of divisors for the desired target clock with the given
+	 * refclk, or FALSE.  The returned values represent the clock equation:
+	 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+	 */
+	limit = intel_limit(crtc, refclk);
+	ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock);
+	if (!ok) {
+		DRM_ERROR("Couldn't find PLL settings for mode!\n");
+		drm_vblank_post_modeset(dev, pipe);
+		return -EINVAL;
+	}
+
+	/* Ensure that the cursor is valid for the new mode before changing... */
+	intel_crtc_update_cursor(crtc, true);
+
+	if (is_lvds && dev_priv->lvds_downclock_avail) {
+		has_reduced_clock = limit->find_pll(limit, crtc,
+						    dev_priv->lvds_downclock,
+						    refclk,
+						    &reduced_clock);
+		if (has_reduced_clock && (clock.p != reduced_clock.p)) {
+			/*
+			 * If the different P is found, it means that we can't
+			 * switch the display clock by using the FP0/FP1.
+			 * In such case we will disable the LVDS downclock
+			 * feature.
+			 */
+			DRM_DEBUG_KMS("Different P is found for "
+				      "LVDS clock/downclock\n");
+			has_reduced_clock = 0;
+		}
+	}
+	/* SDVO TV has fixed PLL values depend on its clock range,
+	   this mirrors vbios setting. */
+	if (is_sdvo && is_tv) {
+		if (adjusted_mode->clock >= 100000
+		    && adjusted_mode->clock < 140500) {
+			clock.p1 = 2;
+			clock.p2 = 10;
+			clock.n = 3;
+			clock.m1 = 16;
+			clock.m2 = 8;
+		} else if (adjusted_mode->clock >= 140500
+			   && adjusted_mode->clock <= 200000) {
+			clock.p1 = 1;
+			clock.p2 = 10;
+			clock.n = 6;
+			clock.m1 = 12;
+			clock.m2 = 8;
+		}
+	}
+
+	/* FDI link */
+	if (HAS_PCH_SPLIT(dev)) {
+		int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+		int lane = 0, link_bw, bpp;
+		/* CPU eDP doesn't require FDI link, so just set DP M/N
+		   according to current link config */
+		if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+			target_clock = mode->clock;
+			intel_edp_link_config(has_edp_encoder,
+					      &lane, &link_bw);
+		} else {
+			/* [e]DP over FDI requires target mode clock
+			   instead of link clock */
+			if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
+				target_clock = mode->clock;
+			else
+				target_clock = adjusted_mode->clock;
+
+			/* FDI is a binary signal running at ~2.7GHz, encoding
+			 * each output octet as 10 bits. The actual frequency
+			 * is stored as a divider into a 100MHz clock, and the
+			 * mode pixel clock is stored in units of 1KHz.
+			 * Hence the bw of each lane in terms of the mode signal
+			 * is:
+			 */
+			link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
+		}
+
+		/* determine panel color depth */
+		temp = I915_READ(PIPECONF(pipe));
+		temp &= ~PIPE_BPC_MASK;
+		if (is_lvds) {
+			/* the BPC will be 6 if it is 18-bit LVDS panel */
+			if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
+				temp |= PIPE_8BPC;
+			else
+				temp |= PIPE_6BPC;
+		} else if (has_edp_encoder) {
+			switch (dev_priv->edp.bpp/3) {
+			case 8:
+				temp |= PIPE_8BPC;
+				break;
+			case 10:
+				temp |= PIPE_10BPC;
+				break;
+			case 6:
+				temp |= PIPE_6BPC;
+				break;
+			case 12:
+				temp |= PIPE_12BPC;
+				break;
+			}
+		} else
+			temp |= PIPE_8BPC;
+		I915_WRITE(PIPECONF(pipe), temp);
+
+		switch (temp & PIPE_BPC_MASK) {
+		case PIPE_8BPC:
+			bpp = 24;
+			break;
+		case PIPE_10BPC:
+			bpp = 30;
+			break;
+		case PIPE_6BPC:
+			bpp = 18;
+			break;
+		case PIPE_12BPC:
+			bpp = 36;
+			break;
+		default:
+			DRM_ERROR("unknown pipe bpc value\n");
+			bpp = 24;
+		}
+
+		if (!lane) {
+			/*
+			 * Account for spread spectrum to avoid
+			 * oversubscribing the link. Max center spread
+			 * is 2.5%; use 5% for safety's sake.
+			 */
+			u32 bps = target_clock * bpp * 21 / 20;
+			lane = bps / (link_bw * 8) + 1;
+		}
+
+		intel_crtc->fdi_lanes = lane;
+
+		if (pixel_multiplier > 1)
+			link_bw *= pixel_multiplier;
+		ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
+	}
+
+	/* Ironlake: try to setup display ref clock before DPLL
+	 * enabling. This is only under driver's control after
+	 * PCH B stepping, previous chipset stepping should be
+	 * ignoring this setting.
+	 */
+	if (HAS_PCH_SPLIT(dev)) {
+		temp = I915_READ(PCH_DREF_CONTROL);
+		/* Always enable nonspread source */
+		temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+		temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+		temp &= ~DREF_SSC_SOURCE_MASK;
+		temp |= DREF_SSC_SOURCE_ENABLE;
+		I915_WRITE(PCH_DREF_CONTROL, temp);
+
+		POSTING_READ(PCH_DREF_CONTROL);
+		udelay(200);
+
+		if (has_edp_encoder) {
+			if (intel_panel_use_ssc(dev_priv)) {
+				temp |= DREF_SSC1_ENABLE;
+				I915_WRITE(PCH_DREF_CONTROL, temp);
+
+				POSTING_READ(PCH_DREF_CONTROL);
+				udelay(200);
+			}
+			temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+
+			/* Enable CPU source on CPU attached eDP */
+			if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+				if (intel_panel_use_ssc(dev_priv))
+					temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+				else
+					temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+			} else {
+				/* Enable SSC on PCH eDP if needed */
+				if (intel_panel_use_ssc(dev_priv)) {
+					DRM_ERROR("enabling SSC on PCH\n");
+					temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
+				}
+			}
+			I915_WRITE(PCH_DREF_CONTROL, temp);
+			POSTING_READ(PCH_DREF_CONTROL);
+			udelay(200);
+		}
+	}
+
+	if (IS_PINEVIEW(dev)) {
+		fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
+		if (has_reduced_clock)
+			fp2 = (1 << reduced_clock.n) << 16 |
+				reduced_clock.m1 << 8 | reduced_clock.m2;
+	} else {
+		fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+		if (has_reduced_clock)
+			fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
+				reduced_clock.m2;
+	}
+
+	/* Enable autotuning of the PLL clock (if permissible) */
+	if (HAS_PCH_SPLIT(dev)) {
+		int factor = 21;
+
+		if (is_lvds) {
+			if ((intel_panel_use_ssc(dev_priv) &&
+			     dev_priv->lvds_ssc_freq == 100) ||
+			    (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
+				factor = 25;
+		} else if (is_sdvo && is_tv)
+			factor = 20;
+
+		if (clock.m1 < factor * clock.n)
+			fp |= FP_CB_TUNE;
+	}
+
+	dpll = 0;
+	if (!HAS_PCH_SPLIT(dev))
+		dpll = DPLL_VGA_MODE_DIS;
+
+	if (!IS_GEN2(dev)) {
+		if (is_lvds)
+			dpll |= DPLLB_MODE_LVDS;
+		else
+			dpll |= DPLLB_MODE_DAC_SERIAL;
+		if (is_sdvo) {
+			int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+			if (pixel_multiplier > 1) {
+				if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+					dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+				else if (HAS_PCH_SPLIT(dev))
+					dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
+			}
+			dpll |= DPLL_DVO_HIGH_SPEED;
+		}
+		if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
+			dpll |= DPLL_DVO_HIGH_SPEED;
+
+		/* compute bitmask from p1 value */
+		if (IS_PINEVIEW(dev))
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
+		else {
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+			/* also FPA1 */
+			if (HAS_PCH_SPLIT(dev))
+				dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+			if (IS_G4X(dev) && has_reduced_clock)
+				dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+		}
+		switch (clock.p2) {
+		case 5:
+			dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+			break;
+		case 7:
+			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+			break;
+		case 10:
+			dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+			break;
+		case 14:
+			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+			break;
+		}
+		if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev))
+			dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
+	} else {
+		if (is_lvds) {
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+		} else {
+			if (clock.p1 == 2)
+				dpll |= PLL_P1_DIVIDE_BY_TWO;
+			else
+				dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+			if (clock.p2 == 4)
+				dpll |= PLL_P2_DIVIDE_BY_4;
+		}
+	}
+
+	if (is_sdvo && is_tv)
+		dpll |= PLL_REF_INPUT_TVCLKINBC;
+	else if (is_tv)
+		/* XXX: just matching BIOS for now */
+		/*	dpll |= PLL_REF_INPUT_TVCLKINBC; */
+		dpll |= 3;
+	else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+	else
+		dpll |= PLL_REF_INPUT_DREFCLK;
+
+	/* setup pipeconf */
+	pipeconf = I915_READ(PIPECONF(pipe));
+
+	/* Set up the display plane register */
+	dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+	/* Ironlake's plane is forced to pipe, bit 24 is to
+	   enable color space conversion */
+	if (!HAS_PCH_SPLIT(dev)) {
+		if (pipe == 0)
+			dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
+		else
+			dspcntr |= DISPPLANE_SEL_PIPE_B;
+	}
+
+	if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
+		/* Enable pixel doubling when the dot clock is > 90% of the (display)
+		 * core speed.
+		 *
+		 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
+		 * pipe == 0 check?
+		 */
+		if (mode->clock >
+		    dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
+			pipeconf |= PIPECONF_DOUBLE_WIDE;
+		else
+			pipeconf &= ~PIPECONF_DOUBLE_WIDE;
+	}
+
+	if (!HAS_PCH_SPLIT(dev))
+		dpll |= DPLL_VCO_ENABLE;
+
+	DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+	drm_mode_debug_printmodeline(mode);
+
+	/* assign to Ironlake registers */
+	if (HAS_PCH_SPLIT(dev)) {
+		fp_reg = PCH_FP0(pipe);
+		dpll_reg = PCH_DPLL(pipe);
+	} else {
+		fp_reg = FP0(pipe);
+		dpll_reg = DPLL(pipe);
+	}
+
+	/* PCH eDP needs FDI, but CPU eDP does not */
+	if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+		I915_WRITE(fp_reg, fp);
+		I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
+
+		POSTING_READ(dpll_reg);
+		udelay(150);
+	}
+
+	/* enable transcoder DPLL */
+	if (HAS_PCH_CPT(dev)) {
+		temp = I915_READ(PCH_DPLL_SEL);
+		switch (pipe) {
+		case 0:
+			temp |= TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL;
+			break;
+		case 1:
+			temp |=	TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL;
+			break;
+		case 2:
+			/* FIXME: manage transcoder PLLs? */
+			temp |= TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL;
+			break;
+		default:
+			BUG();
+		}
+		I915_WRITE(PCH_DPLL_SEL, temp);
+
+		POSTING_READ(PCH_DPLL_SEL);
+		udelay(150);
+	}
+
+	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
+	 * This is an exception to the general rule that mode_set doesn't turn
+	 * things on.
+	 */
+	if (is_lvds) {
+		reg = LVDS;
+		if (HAS_PCH_SPLIT(dev))
+			reg = PCH_LVDS;
+
+		temp = I915_READ(reg);
+		temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+		if (pipe == 1) {
+			if (HAS_PCH_CPT(dev))
+				temp |= PORT_TRANS_B_SEL_CPT;
+			else
+				temp |= LVDS_PIPEB_SELECT;
+		} else {
+			if (HAS_PCH_CPT(dev))
+				temp &= ~PORT_TRANS_SEL_MASK;
+			else
+				temp &= ~LVDS_PIPEB_SELECT;
+		}
+		/* set the corresponsding LVDS_BORDER bit */
+		temp |= dev_priv->lvds_border_bits;
+		/* Set the B0-B3 data pairs corresponding to whether we're going to
+		 * set the DPLLs for dual-channel mode or not.
+		 */
+		if (clock.p2 == 7)
+			temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+		else
+			temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+		/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+		 * appropriately here, but we need to look more thoroughly into how
+		 * panels behave in the two modes.
+		 */
+		/* set the dithering flag on non-PCH LVDS as needed */
+		if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
+			if (dev_priv->lvds_dither)
+				temp |= LVDS_ENABLE_DITHER;
+			else
+				temp &= ~LVDS_ENABLE_DITHER;
+		}
+		if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+			lvds_sync |= LVDS_HSYNC_POLARITY;
+		if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+			lvds_sync |= LVDS_VSYNC_POLARITY;
+		if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
+		    != lvds_sync) {
+			char flags[2] = "-+";
+			DRM_INFO("Changing LVDS panel from "
+				 "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
+				 flags[!(temp & LVDS_HSYNC_POLARITY)],
+				 flags[!(temp & LVDS_VSYNC_POLARITY)],
+				 flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
+				 flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
+			temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+			temp |= lvds_sync;
+		}
+		I915_WRITE(reg, temp);
+	}
+
+	/* set the dithering flag and clear for anything other than a panel. */
+	if (HAS_PCH_SPLIT(dev)) {
+		pipeconf &= ~PIPECONF_DITHER_EN;
+		pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
+		if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) {
+			pipeconf |= PIPECONF_DITHER_EN;
+			pipeconf |= PIPECONF_DITHER_TYPE_ST1;
+		}
+	}
+
+	if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+		intel_dp_set_m_n(crtc, mode, adjusted_mode);
+	} else if (HAS_PCH_SPLIT(dev)) {
+		/* For non-DP output, clear any trans DP clock recovery setting.*/
+		I915_WRITE(TRANSDATA_M1(pipe), 0);
+		I915_WRITE(TRANSDATA_N1(pipe), 0);
+		I915_WRITE(TRANSDPLINK_M1(pipe), 0);
+		I915_WRITE(TRANSDPLINK_N1(pipe), 0);
+	}
+
+	if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+		I915_WRITE(dpll_reg, dpll);
+
+		/* Wait for the clocks to stabilize. */
+		POSTING_READ(dpll_reg);
+		udelay(150);
+
+		if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
+			temp = 0;
+			if (is_sdvo) {
+				temp = intel_mode_get_pixel_multiplier(adjusted_mode);
+				if (temp > 1)
+					temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+				else
+					temp = 0;
+			}
+			I915_WRITE(DPLL_MD(pipe), temp);
+		} else {
+			/* The pixel multiplier can only be updated once the
+			 * DPLL is enabled and the clocks are stable.
+			 *
+			 * So write it again.
+			 */
+			I915_WRITE(dpll_reg, dpll);
+		}
+	}
+
+	intel_crtc->lowfreq_avail = false;
+	if (is_lvds && has_reduced_clock && i915_powersave) {
+		I915_WRITE(fp_reg + 4, fp2);
+		intel_crtc->lowfreq_avail = true;
+		if (HAS_PIPE_CXSR(dev)) {
+			DRM_DEBUG_KMS("enabling CxSR downclocking\n");
+			pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
+		}
+	} else {
+		I915_WRITE(fp_reg + 4, fp);
+		if (HAS_PIPE_CXSR(dev)) {
+			DRM_DEBUG_KMS("disabling CxSR downclocking\n");
+			pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+		}
+	}
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
+		/* the chip adds 2 halflines automatically */
+		adjusted_mode->crtc_vdisplay -= 1;
+		adjusted_mode->crtc_vtotal -= 1;
+		adjusted_mode->crtc_vblank_start -= 1;
+		adjusted_mode->crtc_vblank_end -= 1;
+		adjusted_mode->crtc_vsync_end -= 1;
+		adjusted_mode->crtc_vsync_start -= 1;
+	} else
+		pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */
+
+	I915_WRITE(HTOTAL(pipe),
+		   (adjusted_mode->crtc_hdisplay - 1) |
+		   ((adjusted_mode->crtc_htotal - 1) << 16));
+	I915_WRITE(HBLANK(pipe),
+		   (adjusted_mode->crtc_hblank_start - 1) |
+		   ((adjusted_mode->crtc_hblank_end - 1) << 16));
+	I915_WRITE(HSYNC(pipe),
+		   (adjusted_mode->crtc_hsync_start - 1) |
+		   ((adjusted_mode->crtc_hsync_end - 1) << 16));
+
+	I915_WRITE(VTOTAL(pipe),
+		   (adjusted_mode->crtc_vdisplay - 1) |
+		   ((adjusted_mode->crtc_vtotal - 1) << 16));
+	I915_WRITE(VBLANK(pipe),
+		   (adjusted_mode->crtc_vblank_start - 1) |
+		   ((adjusted_mode->crtc_vblank_end - 1) << 16));
+	I915_WRITE(VSYNC(pipe),
+		   (adjusted_mode->crtc_vsync_start - 1) |
+		   ((adjusted_mode->crtc_vsync_end - 1) << 16));
+
+	/* pipesrc and dspsize control the size that is scaled from,
+	 * which should always be the user's requested size.
+	 */
+	if (!HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(DSPSIZE(plane),
+			   ((mode->vdisplay - 1) << 16) |
+			   (mode->hdisplay - 1));
+		I915_WRITE(DSPPOS(plane), 0);
+	}
+	I915_WRITE(PIPESRC(pipe),
+		   ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
+		I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
+		I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
+		I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
+
+		if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+			ironlake_set_pll_edp(crtc, adjusted_mode->clock);
+		}
+	}
+
+	I915_WRITE(PIPECONF(pipe), pipeconf);
+	POSTING_READ(PIPECONF(pipe));
+	if (!HAS_PCH_SPLIT(dev))
+		intel_enable_pipe(dev_priv, pipe, false);
+
+	intel_wait_for_vblank(dev, pipe);
+
+	if (IS_GEN5(dev)) {
+		/* enable address swizzle for tiling buffer */
+		temp = I915_READ(DISP_ARB_CTL);
+		I915_WRITE(DISP_ARB_CTL, temp | DISP_TILE_SURFACE_SWIZZLING);
+	}
+
+	I915_WRITE(DSPCNTR(plane), dspcntr);
+	POSTING_READ(DSPCNTR(plane));
+
+	ret = intel_pipe_set_base(crtc, x, y, old_fb);
+
+	intel_update_watermarks(dev);
+
+	drm_vblank_post_modeset(dev, pipe);
+
+	return ret;
+}
+
+static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode,
+				  int x, int y,
+				  struct drm_framebuffer *old_fb)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5164,6 +5812,22 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	return ret;
 }
 
+static int intel_crtc_mode_set(struct drm_crtc *crtc,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode,
+			       int x, int y,
+			       struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
+					      x, y, old_fb);
+
+	return ret;
+}
+
 /** Loads the palette/gamma unit for the CRTC with the prepared values */
 void intel_crtc_load_lut(struct drm_crtc *crtc)
 {
@@ -7329,10 +7993,13 @@ static void intel_init_display(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	/* We always want a DPMS function */
-	if (HAS_PCH_SPLIT(dev))
+	if (HAS_PCH_SPLIT(dev)) {
 		dev_priv->display.dpms = ironlake_crtc_dpms;
-	else
+		dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
+	} else {
 		dev_priv->display.dpms = i9xx_crtc_dpms;
+		dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
+	}
 
 	if (I915_HAS_FBC(dev)) {
 		if (HAS_PCH_SPLIT(dev)) {