diff --git a/drivers/scsi/qla4xxx/Kconfig b/drivers/scsi/qla4xxx/Kconfig index 69cbff3f57cf3abb49a4a289b662348ff9409c6d..2c33ce6eac1ee57ed2fbcf26832fa25835502340 100644 --- a/drivers/scsi/qla4xxx/Kconfig +++ b/drivers/scsi/qla4xxx/Kconfig @@ -1,7 +1,7 @@ config SCSI_QLA_ISCSI - tristate "QLogic ISP4XXX host adapter family support" - depends on PCI && SCSI && NET + tristate "QLogic ISP4XXX and ISP82XX host adapter family support" + depends on PCI && SCSI select SCSI_ISCSI_ATTRS ---help--- - This driver supports the QLogic 40xx (ISP4XXX) iSCSI host - adapter family. + This driver supports the QLogic 40xx (ISP4XXX) and 8022 (ISP82XX) + iSCSI host adapter family. diff --git a/drivers/scsi/qla4xxx/Makefile b/drivers/scsi/qla4xxx/Makefile index 86ea37baa0fcc10c268795f2888d39cd0db71996..0339ff03a535b7facb7674ca810d5e321bb40db9 100644 --- a/drivers/scsi/qla4xxx/Makefile +++ b/drivers/scsi/qla4xxx/Makefile @@ -1,5 +1,5 @@ qla4xxx-y := ql4_os.o ql4_init.o ql4_mbx.o ql4_iocb.o ql4_isr.o \ - ql4_nvram.o ql4_dbg.o + ql4_nx.o ql4_nvram.o ql4_dbg.o obj-$(CONFIG_SCSI_QLA_ISCSI) += qla4xxx.o diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 3e1c990f5e208b3034d44342bf1923261d83e0e9..a79da8dd206455dc35b92e84e62893c262d18a5c 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -33,6 +33,8 @@ #include #include +#include "ql4_dbg.h" +#include "ql4_nx.h" #ifndef PCI_DEVICE_ID_QLOGIC_ISP4010 #define PCI_DEVICE_ID_QLOGIC_ISP4010 0x4010 @@ -46,6 +48,10 @@ #define PCI_DEVICE_ID_QLOGIC_ISP4032 0x4032 #endif +#ifndef PCI_DEVICE_ID_QLOGIC_ISP8022 +#define PCI_DEVICE_ID_QLOGIC_ISP8022 0x8022 +#endif + #define QLA_SUCCESS 0 #define QLA_ERROR 1 @@ -85,15 +91,22 @@ #define BIT_30 0x40000000 #define BIT_31 0x80000000 +/** + * Macros to help code, maintain, etc. + **/ +#define ql4_printk(level, ha, format, arg...) \ + dev_printk(level , &((ha)->pdev->dev) , format , ## arg) + + /* * Host adapter default definitions ***********************************/ #define MAX_HBAS 16 #define MAX_BUSES 1 -#define MAX_TARGETS (MAX_PRST_DEV_DB_ENTRIES + MAX_DEV_DB_ENTRIES) +#define MAX_TARGETS MAX_DEV_DB_ENTRIES #define MAX_LUNS 0xffff #define MAX_AEN_ENTRIES 256 /* should be > EXT_DEF_MAX_AEN_QUEUE */ -#define MAX_DDB_ENTRIES (MAX_PRST_DEV_DB_ENTRIES + MAX_DEV_DB_ENTRIES) +#define MAX_DDB_ENTRIES MAX_DEV_DB_ENTRIES #define MAX_PDU_ENTRIES 32 #define INVALID_ENTRY 0xFFFF #define MAX_CMDS_TO_RISC 1024 @@ -134,7 +147,7 @@ #define SOFT_RESET_TOV 30 #define RESET_INTR_TOV 3 #define SEMAPHORE_TOV 10 -#define ADAPTER_INIT_TOV 120 +#define ADAPTER_INIT_TOV 30 #define ADAPTER_RESET_TOV 180 #define EXTEND_CMD_TOV 60 #define WAIT_CMD_TOV 30 @@ -184,8 +197,6 @@ struct srb { uint16_t iocb_tov; uint16_t iocb_cnt; /* Number of used iocbs */ uint16_t cc_stat; - u_long r_start; /* Time we recieve a cmd from OS */ - u_long u_start; /* Time when we handed the cmd to F/W */ /* Used for extended sense / status continuation */ uint8_t *req_sense_ptr; @@ -221,7 +232,6 @@ struct ddb_entry { unsigned long dev_scan_wait_to_start_relogin; unsigned long dev_scan_wait_to_complete_relogin; - uint16_t os_target_id; /* Target ID */ uint16_t fw_ddb_index; /* DDB firmware index */ uint16_t options; uint32_t fw_ddb_device_state; /* F/W Device State -- see ql4_fw.h */ @@ -285,6 +295,67 @@ struct ddb_entry { #include "ql4_fw.h" #include "ql4_nvram.h" +struct ql82xx_hw_data { + /* Offsets for flash/nvram access (set to ~0 if not used). */ + uint32_t flash_conf_off; + uint32_t flash_data_off; + + uint32_t fdt_wrt_disable; + uint32_t fdt_erase_cmd; + uint32_t fdt_block_size; + uint32_t fdt_unprotect_sec_cmd; + uint32_t fdt_protect_sec_cmd; + + uint32_t flt_region_flt; + uint32_t flt_region_fdt; + uint32_t flt_region_boot; + uint32_t flt_region_bootload; + uint32_t flt_region_fw; + uint32_t reserved; +}; + +struct qla4_8xxx_legacy_intr_set { + uint32_t int_vec_bit; + uint32_t tgt_status_reg; + uint32_t tgt_mask_reg; + uint32_t pci_int_reg; +}; + +/* MSI-X Support */ + +#define QLA_MSIX_DEFAULT 0x00 +#define QLA_MSIX_RSP_Q 0x01 + +#define QLA_MSIX_ENTRIES 2 +#define QLA_MIDX_DEFAULT 0 +#define QLA_MIDX_RSP_Q 1 + +struct ql4_msix_entry { + int have_irq; + uint16_t msix_vector; + uint16_t msix_entry; +}; + +/* + * ISP Operations + */ +struct isp_operations { + int (*iospace_config) (struct scsi_qla_host *ha); + void (*pci_config) (struct scsi_qla_host *); + void (*disable_intrs) (struct scsi_qla_host *); + void (*enable_intrs) (struct scsi_qla_host *); + int (*start_firmware) (struct scsi_qla_host *); + irqreturn_t (*intr_handler) (int , void *); + void (*interrupt_service_routine) (struct scsi_qla_host *, uint32_t); + int (*reset_chip) (struct scsi_qla_host *); + int (*reset_firmware) (struct scsi_qla_host *); + void (*queue_iocb) (struct scsi_qla_host *); + void (*complete_iocb) (struct scsi_qla_host *); + uint16_t (*rd_shdw_req_q_out) (struct scsi_qla_host *); + uint16_t (*rd_shdw_rsp_q_in) (struct scsi_qla_host *); + int (*get_sys_info) (struct scsi_qla_host *); +}; + /* * Linux Host Adapter structure */ @@ -296,28 +367,39 @@ struct scsi_qla_host { #define AF_INIT_DONE 1 /* 0x00000002 */ #define AF_MBOX_COMMAND 2 /* 0x00000004 */ #define AF_MBOX_COMMAND_DONE 3 /* 0x00000008 */ +#define AF_DPC_SCHEDULED 5 /* 0x00000020 */ #define AF_INTERRUPTS_ON 6 /* 0x00000040 */ #define AF_GET_CRASH_RECORD 7 /* 0x00000080 */ #define AF_LINK_UP 8 /* 0x00000100 */ #define AF_IRQ_ATTACHED 10 /* 0x00000400 */ #define AF_DISABLE_ACB_COMPLETE 11 /* 0x00000800 */ +#define AF_HBA_GOING_AWAY 12 /* 0x00001000 */ +#define AF_INTx_ENABLED 15 /* 0x00008000 */ +#define AF_MSI_ENABLED 16 /* 0x00010000 */ +#define AF_MSIX_ENABLED 17 /* 0x00020000 */ +#define AF_MBOX_COMMAND_NOPOLL 18 /* 0x00040000 */ + unsigned long dpc_flags; #define DPC_RESET_HA 1 /* 0x00000002 */ #define DPC_RETRY_RESET_HA 2 /* 0x00000004 */ #define DPC_RELOGIN_DEVICE 3 /* 0x00000008 */ -#define DPC_RESET_HA_DESTROY_DDB_LIST 4 /* 0x00000010 */ +#define DPC_RESET_HA_FW_CONTEXT 4 /* 0x00000010 */ #define DPC_RESET_HA_INTR 5 /* 0x00000020 */ #define DPC_ISNS_RESTART 7 /* 0x00000080 */ #define DPC_AEN 9 /* 0x00000200 */ #define DPC_GET_DHCP_IP_ADDR 15 /* 0x00008000 */ #define DPC_LINK_CHANGED 18 /* 0x00040000 */ +#define DPC_RESET_ACTIVE 20 /* 0x00040000 */ +#define DPC_HA_UNRECOVERABLE 21 /* 0x00080000 ISP-82xx only*/ +#define DPC_HA_NEED_QUIESCENT 22 /* 0x00100000 ISP-82xx only*/ + struct Scsi_Host *host; /* pointer to host data */ uint32_t tot_ddbs; - uint16_t iocb_cnt; + uint16_t iocb_cnt; /* SRB cache. */ #define SRB_MIN_REQ 128 @@ -332,14 +414,13 @@ struct scsi_qla_host { #define MIN_IOBASE_LEN 0x100 uint16_t req_q_count; - uint8_t rsvd1[2]; unsigned long host_no; /* NVRAM registers */ struct eeprom_data *nvram; spinlock_t hardware_lock ____cacheline_aligned; - uint32_t eeprom_cmd_data; + uint32_t eeprom_cmd_data; /* Counters for general statistics */ uint64_t isr_count; @@ -375,7 +456,6 @@ struct scsi_qla_host { uint8_t alias[32]; uint8_t name_string[256]; uint8_t heartbeat_interval; - uint8_t rsvd; /* --- From FlashSysInfo --- */ uint8_t my_mac[MAC_ADDR_LEN]; @@ -469,6 +549,40 @@ struct scsi_qla_host { struct in6_addr ipv6_addr0; struct in6_addr ipv6_addr1; struct in6_addr ipv6_default_router_addr; + + /* qla82xx specific fields */ + struct device_reg_82xx __iomem *qla4_8xxx_reg; /* Base I/O address */ + unsigned long nx_pcibase; /* Base I/O address */ + uint8_t *nx_db_rd_ptr; /* Doorbell read pointer */ + unsigned long nx_db_wr_ptr; /* Door bell write pointer */ + unsigned long first_page_group_start; + unsigned long first_page_group_end; + + uint32_t crb_win; + uint32_t curr_window; + uint32_t ddr_mn_window; + unsigned long mn_win_crb; + unsigned long ms_win_crb; + int qdr_sn_window; + rwlock_t hw_lock; + uint16_t func_num; + int link_width; + + struct qla4_8xxx_legacy_intr_set nx_legacy_intr; + u32 nx_crb_mask; + + uint8_t revision_id; + uint32_t fw_heartbeat_counter; + + struct isp_operations *isp_ops; + struct ql82xx_hw_data hw; + + struct ql4_msix_entry msix_entries[QLA_MSIX_ENTRIES]; + + uint32_t nx_dev_init_timeout; + uint32_t nx_reset_timeout; + + struct completion mbx_intr_comp; }; static inline int is_ipv4_enabled(struct scsi_qla_host *ha) @@ -496,6 +610,11 @@ static inline int is_qla4032(struct scsi_qla_host *ha) return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP4032; } +static inline int is_qla8022(struct scsi_qla_host *ha) +{ + return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8022; +} + static inline int adapter_up(struct scsi_qla_host *ha) { return (test_bit(AF_ONLINE, &ha->flags) != 0) && diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index 855226e086652c54475c4fad24d0edf1a07c2eff..c94c9ddfb3a61a2ddbbedf6f931d0ec5058662a0 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -11,7 +11,7 @@ #define MAX_PRST_DEV_DB_ENTRIES 64 #define MIN_DISC_DEV_DB_ENTRY MAX_PRST_DEV_DB_ENTRIES -#define MAX_DEV_DB_ENTRIES 512 +#define MAX_DEV_DB_ENTRIES 512 /************************************************************************* * @@ -37,6 +37,33 @@ struct host_mem_cfg_regs { __le32 rsrvd1[31]; /* 0x84-0xFF */ }; +/* + * ISP 82xx I/O Register Set structure definitions. + */ +struct device_reg_82xx { + __le32 req_q_out; /* 0x0000 (R): Request Queue out-Pointer. */ + __le32 reserve1[63]; /* Request Queue out-Pointer. (64 * 4) */ + __le32 rsp_q_in; /* 0x0100 (R/W): Response Queue In-Pointer. */ + __le32 reserve2[63]; /* Response Queue In-Pointer. */ + __le32 rsp_q_out; /* 0x0200 (R/W): Response Queue Out-Pointer. */ + __le32 reserve3[63]; /* Response Queue Out-Pointer. */ + + __le32 mailbox_in[8]; /* 0x0300 (R/W): Mail box In registers */ + __le32 reserve4[24]; + __le32 hint; /* 0x0380 (R/W): Host interrupt register */ +#define HINT_MBX_INT_PENDING BIT_0 + __le32 reserve5[31]; + __le32 mailbox_out[8]; /* 0x0400 (R): Mail box Out registers */ + __le32 reserve6[56]; + + __le32 host_status; /* Offset 0x500 (R): host status */ +#define HSRX_RISC_MB_INT BIT_0 /* RISC to Host Mailbox interrupt */ +#define HSRX_RISC_IOCB_INT BIT_1 /* RISC to Host IOCB interrupt */ + + __le32 host_int; /* Offset 0x0504 (R/W): Interrupt status. */ +#define ISRX_82XX_RISC_INT BIT_0 /* RISC interrupt. */ +}; + /* remote register set (access via PCI memory read/write) */ struct isp_reg { #define MBOX_REG_COUNT 8 @@ -206,6 +233,79 @@ union external_hw_config_reg { uint32_t Asuint32_t; }; +/* 82XX Support start */ +/* 82xx Default FLT Addresses */ +#define FA_FLASH_LAYOUT_ADDR_82 0xFC400 +#define FA_FLASH_DESCR_ADDR_82 0xFC000 +#define FA_BOOT_LOAD_ADDR_82 0x04000 +#define FA_BOOT_CODE_ADDR_82 0x20000 +#define FA_RISC_CODE_ADDR_82 0x40000 +#define FA_GOLD_RISC_CODE_ADDR_82 0x80000 + +/* Flash Description Table */ +struct qla_fdt_layout { + uint8_t sig[4]; + uint16_t version; + uint16_t len; + uint16_t checksum; + uint8_t unused1[2]; + uint8_t model[16]; + uint16_t man_id; + uint16_t id; + uint8_t flags; + uint8_t erase_cmd; + uint8_t alt_erase_cmd; + uint8_t wrt_enable_cmd; + uint8_t wrt_enable_bits; + uint8_t wrt_sts_reg_cmd; + uint8_t unprotect_sec_cmd; + uint8_t read_man_id_cmd; + uint32_t block_size; + uint32_t alt_block_size; + uint32_t flash_size; + uint32_t wrt_enable_data; + uint8_t read_id_addr_len; + uint8_t wrt_disable_bits; + uint8_t read_dev_id_len; + uint8_t chip_erase_cmd; + uint16_t read_timeout; + uint8_t protect_sec_cmd; + uint8_t unused2[65]; +}; + +/* Flash Layout Table */ + +struct qla_flt_location { + uint8_t sig[4]; + uint16_t start_lo; + uint16_t start_hi; + uint8_t version; + uint8_t unused[5]; + uint16_t checksum; +}; + +struct qla_flt_header { + uint16_t version; + uint16_t length; + uint16_t checksum; + uint16_t unused; +}; + +/* 82xx FLT Regions */ +#define FLT_REG_FDT 0x1a +#define FLT_REG_FLT 0x1c +#define FLT_REG_BOOTLOAD_82 0x72 +#define FLT_REG_FW_82 0x74 +#define FLT_REG_GOLD_FW_82 0x75 +#define FLT_REG_BOOT_CODE_82 0x78 + +struct qla_flt_region { + uint32_t code; + uint32_t size; + uint32_t start; + uint32_t end; +}; + /************************************************************************* * * Mailbox Commands Structures and Definitions @@ -215,6 +315,10 @@ union external_hw_config_reg { /* Mailbox command definitions */ #define MBOX_CMD_ABOUT_FW 0x0009 #define MBOX_CMD_PING 0x000B +#define MBOX_CMD_ENABLE_INTRS 0x0010 +#define INTR_DISABLE 0 +#define INTR_ENABLE 1 +#define MBOX_CMD_STOP_FW 0x0014 #define MBOX_CMD_ABORT_TASK 0x0015 #define MBOX_CMD_LUN_RESET 0x0016 #define MBOX_CMD_TARGET_WARM_RESET 0x0017 @@ -243,6 +347,7 @@ union external_hw_config_reg { #define DDB_DS_LOGIN_IN_PROCESS 0x07 #define MBOX_CMD_GET_FW_STATE 0x0069 #define MBOX_CMD_GET_INIT_FW_CTRL_BLOCK_DEFAULTS 0x006A +#define MBOX_CMD_GET_SYS_INFO 0x0078 #define MBOX_CMD_RESTORE_FACTORY_DEFAULTS 0x0087 #define MBOX_CMD_SET_ACB 0x0088 #define MBOX_CMD_GET_ACB 0x0089 @@ -318,6 +423,15 @@ union external_hw_config_reg { #define MBOX_ASTS_IPSEC_SYSTEM_FATAL_ERROR 0x8022 #define MBOX_ASTS_SUBNET_STATE_CHANGE 0x8027 +/* ACB State Defines */ +#define ACB_STATE_UNCONFIGURED 0x00 +#define ACB_STATE_INVALID 0x01 +#define ACB_STATE_ACQUIRING 0x02 +#define ACB_STATE_TENTATIVE 0x03 +#define ACB_STATE_DEPRICATED 0x04 +#define ACB_STATE_VALID 0x05 +#define ACB_STATE_DISABLING 0x06 + /*************************************************************************/ /* Host Adapter Initialization Control Block (from host) */ @@ -558,6 +672,20 @@ struct flash_sys_info { uint32_t reserved1[39]; /* 170-1ff */ }; /* 200 */ +struct mbx_sys_info { + uint8_t board_id_str[16]; /* Keep board ID string first */ + /* in this structure for GUI. */ + uint16_t board_id; /* board ID code */ + uint16_t phys_port_cnt; /* number of physical network ports */ + uint16_t port_num; /* network port for this PCI function */ + /* (port 0 is first port) */ + uint8_t mac_addr[6]; /* MAC address for this PCI function */ + uint32_t iscsi_pci_func_cnt; /* number of iSCSI PCI functions */ + uint32_t pci_func; /* this PCI function */ + unsigned char serial_number[16]; /* serial number string */ + uint8_t reserved[16]; +}; + struct crash_record { uint16_t fw_major_version; /* 00 - 01 */ uint16_t fw_minor_version; /* 02 - 03 */ @@ -814,4 +942,13 @@ struct passthru_status { uint8_t res4[16]; /* 30-3F */ }; +/* + * ISP queue - response queue entry definition. + */ +struct response { + uint8_t data[60]; + uint32_t signature; +#define RESPONSE_PROCESSED 0xDEADDEAD /* Signature */ +}; + #endif /* _QLA4X_FW_H */ diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h index c4636f6cb3cbcb68b2ab584604df6b3c9e6cf2aa..c9cd5d6db98240b809be2f26a6d69a797fa8048f 100644 --- a/drivers/scsi/qla4xxx/ql4_glbl.h +++ b/drivers/scsi/qla4xxx/ql4_glbl.h @@ -10,31 +10,32 @@ struct iscsi_cls_conn; -void qla4xxx_hw_reset(struct scsi_qla_host *ha); +int qla4xxx_hw_reset(struct scsi_qla_host *ha); int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a); int qla4xxx_send_tgts(struct scsi_qla_host *ha, char *ip, uint16_t port); -int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb); -int qla4xxx_initialize_adapter(struct scsi_qla_host * ha, +int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb *srb); +int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, uint8_t renew_ddb_list); int qla4xxx_soft_reset(struct scsi_qla_host *ha); irqreturn_t qla4xxx_intr_handler(int irq, void *dev_id); -void qla4xxx_free_ddb_list(struct scsi_qla_host * ha); -void qla4xxx_process_aen(struct scsi_qla_host * ha, uint8_t process_aen); +void qla4xxx_free_ddb_list(struct scsi_qla_host *ha); +void qla4xxx_free_ddb(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry); +void qla4xxx_process_aen(struct scsi_qla_host *ha, uint8_t process_aen); -int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha); -int qla4xxx_relogin_device(struct scsi_qla_host * ha, - struct ddb_entry * ddb_entry); +int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host *ha); +int qla4xxx_relogin_device(struct scsi_qla_host *ha, + struct ddb_entry *ddb_entry); int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb); -int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry, +int qla4xxx_reset_lun(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry, int lun); -int qla4xxx_reset_target(struct scsi_qla_host * ha, - struct ddb_entry * ddb_entry); -int qla4xxx_get_flash(struct scsi_qla_host * ha, dma_addr_t dma_addr, +int qla4xxx_reset_target(struct scsi_qla_host *ha, + struct ddb_entry *ddb_entry); +int qla4xxx_get_flash(struct scsi_qla_host *ha, dma_addr_t dma_addr, uint32_t offset, uint32_t len); -int qla4xxx_get_firmware_status(struct scsi_qla_host * ha); -int qla4xxx_get_firmware_state(struct scsi_qla_host * ha); -int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha); +int qla4xxx_get_firmware_status(struct scsi_qla_host *ha); +int qla4xxx_get_firmware_state(struct scsi_qla_host *ha); +int qla4xxx_initialize_fw_cb(struct scsi_qla_host *ha); /* FIXME: Goodness! this really wants a small struct to hold the * parameters. On x86 the args will get passed on the stack! */ @@ -54,20 +55,20 @@ int qla4xxx_set_ddb_entry(struct scsi_qla_host * ha, uint16_t fw_ddb_index, void qla4xxx_mark_device_missing(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry); -u16 rd_nvram_word(struct scsi_qla_host * ha, int offset); -void qla4xxx_get_crash_record(struct scsi_qla_host * ha); +u16 rd_nvram_word(struct scsi_qla_host *ha, int offset); +void qla4xxx_get_crash_record(struct scsi_qla_host *ha); struct ddb_entry *qla4xxx_alloc_sess(struct scsi_qla_host *ha); int qla4xxx_add_sess(struct ddb_entry *); void qla4xxx_destroy_sess(struct ddb_entry *ddb_entry); -int qla4xxx_is_nvram_configuration_valid(struct scsi_qla_host * ha); +int qla4xxx_is_nvram_configuration_valid(struct scsi_qla_host *ha); int qla4xxx_get_fw_version(struct scsi_qla_host * ha); -void qla4xxx_interrupt_service_routine(struct scsi_qla_host * ha, +void qla4xxx_interrupt_service_routine(struct scsi_qla_host *ha, uint32_t intr_status); -int qla4xxx_init_rings(struct scsi_qla_host * ha); -struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, - uint32_t index); +int qla4xxx_init_rings(struct scsi_qla_host *ha); void qla4xxx_srb_compl(struct kref *ref); -int qla4xxx_reinitialize_ddb_list(struct scsi_qla_host * ha); +struct srb *qla4xxx_del_from_active_array(struct scsi_qla_host *ha, + uint32_t index); +int qla4xxx_reinitialize_ddb_list(struct scsi_qla_host *ha); int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, uint32_t state, uint32_t conn_error); void qla4xxx_dump_buffer(void *b, uint32_t size); @@ -75,8 +76,65 @@ int qla4xxx_send_marker_iocb(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry, int lun, uint16_t mrkr_mod); int qla4_is_relogin_allowed(struct scsi_qla_host *ha, uint32_t conn_err); +int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, + uint8_t outCount, uint32_t *mbx_cmd, uint32_t *mbx_sts); + +void qla4xxx_queue_iocb(struct scsi_qla_host *ha); +void qla4xxx_complete_iocb(struct scsi_qla_host *ha); +int qla4xxx_get_sys_info(struct scsi_qla_host *ha); +int qla4xxx_iospace_config(struct scsi_qla_host *ha); +void qla4xxx_pci_config(struct scsi_qla_host *ha); +int qla4xxx_start_firmware(struct scsi_qla_host *ha); +irqreturn_t qla4xxx_intr_handler(int irq, void *dev_id); +uint16_t qla4xxx_rd_shdw_req_q_out(struct scsi_qla_host *ha); +uint16_t qla4xxx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha); +int qla4xxx_request_irqs(struct scsi_qla_host *ha); +void qla4xxx_free_irqs(struct scsi_qla_host *ha); +void qla4xxx_process_response_queue(struct scsi_qla_host *ha); +void qla4xxx_wake_dpc(struct scsi_qla_host *ha); +void qla4xxx_get_conn_event_log(struct scsi_qla_host *ha); + +void qla4_8xxx_pci_config(struct scsi_qla_host *); +int qla4_8xxx_iospace_config(struct scsi_qla_host *ha); +int qla4_8xxx_load_risc(struct scsi_qla_host *); +irqreturn_t qla4_8xxx_intr_handler(int irq, void *dev_id); +void qla4_8xxx_queue_iocb(struct scsi_qla_host *ha); +void qla4_8xxx_complete_iocb(struct scsi_qla_host *ha); + +int qla4_8xxx_crb_win_lock(struct scsi_qla_host *); +void qla4_8xxx_crb_win_unlock(struct scsi_qla_host *); +int qla4_8xxx_pci_get_crb_addr_2M(struct scsi_qla_host *, ulong *); +void qla4_8xxx_wr_32(struct scsi_qla_host *, ulong, u32); +int qla4_8xxx_rd_32(struct scsi_qla_host *, ulong); +int qla4_8xxx_pci_mem_read_2M(struct scsi_qla_host *, u64, void *, int); +int qla4_8xxx_pci_mem_write_2M(struct scsi_qla_host *ha, u64, void *, int); +int qla4_8xxx_isp_reset(struct scsi_qla_host *ha); +void qla4_8xxx_interrupt_service_routine(struct scsi_qla_host *ha, + uint32_t intr_status); +uint16_t qla4_8xxx_rd_shdw_req_q_out(struct scsi_qla_host *ha); +uint16_t qla4_8xxx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha); +int qla4_8xxx_get_sys_info(struct scsi_qla_host *ha); +void qla4_8xxx_watchdog(struct scsi_qla_host *ha); +int qla4_8xxx_stop_firmware(struct scsi_qla_host *ha); +int qla4_8xxx_get_flash_info(struct scsi_qla_host *ha); +void qla4_8xxx_enable_intrs(struct scsi_qla_host *ha); +void qla4_8xxx_disable_intrs(struct scsi_qla_host *ha); +int qla4_8xxx_enable_msix(struct scsi_qla_host *ha); +void qla4_8xxx_disable_msix(struct scsi_qla_host *ha); +irqreturn_t qla4_8xxx_msi_handler(int irq, void *dev_id); +irqreturn_t qla4_8xxx_default_intr_handler(int irq, void *dev_id); +irqreturn_t qla4_8xxx_msix_rsp_q(int irq, void *dev_id); +void qla4xxx_mark_all_devices_missing(struct scsi_qla_host *ha); +void qla4xxx_dead_adapter_cleanup(struct scsi_qla_host *ha); +int qla4_8xxx_idc_lock(struct scsi_qla_host *ha); +void qla4_8xxx_idc_unlock(struct scsi_qla_host *ha); +int qla4_8xxx_device_state_handler(struct scsi_qla_host *ha); +void qla4_8xxx_need_qsnt_handler(struct scsi_qla_host *ha); +void qla4_8xxx_clear_drv_active(struct scsi_qla_host *ha); + extern int ql4xextended_error_logging; extern int ql4xdiscoverywait; extern int ql4xdontresethba; -extern int ql4_mod_unload; +extern int ql4xenablemsix; + #endif /* _QLA4x_GBL_H */ diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 4a332c32d71e082887ee3dc0f5d56859549f2b9d..539546df03767b32a01285c238bca190c226117b 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -11,8 +11,8 @@ #include "ql4_dbg.h" #include "ql4_inline.h" -static struct ddb_entry * qla4xxx_alloc_ddb(struct scsi_qla_host *ha, - uint32_t fw_ddb_index); +static struct ddb_entry *qla4xxx_alloc_ddb(struct scsi_qla_host *ha, + uint32_t fw_ddb_index); static void ql4xxx_set_mac_number(struct scsi_qla_host *ha) { @@ -51,8 +51,8 @@ static void ql4xxx_set_mac_number(struct scsi_qla_host *ha) * This routine deallocates and unlinks the specified ddb_entry from the * adapter's **/ -static void qla4xxx_free_ddb(struct scsi_qla_host *ha, - struct ddb_entry *ddb_entry) +void qla4xxx_free_ddb(struct scsi_qla_host *ha, + struct ddb_entry *ddb_entry) { /* Remove device entry from list */ list_del_init(&ddb_entry->list); @@ -85,6 +85,25 @@ void qla4xxx_free_ddb_list(struct scsi_qla_host *ha) } } +/** + * qla4xxx_init_response_q_entries() - Initializes response queue entries. + * @ha: HA context + * + * Beginning of request ring has initialization control block already built + * by nvram config routine. + **/ +static void qla4xxx_init_response_q_entries(struct scsi_qla_host *ha) +{ + uint16_t cnt; + struct response *pkt; + + pkt = (struct response *)ha->response_ptr; + for (cnt = 0; cnt < RESPONSE_QUEUE_DEPTH; cnt++) { + pkt->signature = RESPONSE_PROCESSED; + pkt++; + } +} + /** * qla4xxx_init_rings - initialize hw queues * @ha: pointer to host adapter structure. @@ -109,19 +128,31 @@ int qla4xxx_init_rings(struct scsi_qla_host *ha) ha->response_out = 0; ha->response_ptr = &ha->response_ring[ha->response_out]; - /* - * Initialize DMA Shadow registers. The firmware is really supposed to - * take care of this, but on some uniprocessor systems, the shadow - * registers aren't cleared-- causing the interrupt_handler to think - * there are responses to be processed when there aren't. - */ - ha->shadow_regs->req_q_out = __constant_cpu_to_le32(0); - ha->shadow_regs->rsp_q_in = __constant_cpu_to_le32(0); - wmb(); + if (is_qla8022(ha)) { + writel(0, + (unsigned long __iomem *)&ha->qla4_8xxx_reg->req_q_out); + writel(0, + (unsigned long __iomem *)&ha->qla4_8xxx_reg->rsp_q_in); + writel(0, + (unsigned long __iomem *)&ha->qla4_8xxx_reg->rsp_q_out); + } else { + /* + * Initialize DMA Shadow registers. The firmware is really + * supposed to take care of this, but on some uniprocessor + * systems, the shadow registers aren't cleared-- causing + * the interrupt_handler to think there are responses to be + * processed when there aren't. + */ + ha->shadow_regs->req_q_out = __constant_cpu_to_le32(0); + ha->shadow_regs->rsp_q_in = __constant_cpu_to_le32(0); + wmb(); - writel(0, &ha->reg->req_q_in); - writel(0, &ha->reg->rsp_q_out); - readl(&ha->reg->rsp_q_out); + writel(0, &ha->reg->req_q_in); + writel(0, &ha->reg->rsp_q_out); + readl(&ha->reg->rsp_q_out); + } + + qla4xxx_init_response_q_entries(ha); spin_unlock_irqrestore(&ha->hardware_lock, flags); @@ -129,11 +160,11 @@ int qla4xxx_init_rings(struct scsi_qla_host *ha) } /** - * qla4xxx_validate_mac_address - validate adapter MAC address(es) + * qla4xxx_get_sys_info - validate adapter MAC address(es) * @ha: pointer to host adapter structure. * **/ -static int qla4xxx_validate_mac_address(struct scsi_qla_host *ha) +int qla4xxx_get_sys_info(struct scsi_qla_host *ha) { struct flash_sys_info *sys_info; dma_addr_t sys_info_dma; @@ -145,7 +176,7 @@ static int qla4xxx_validate_mac_address(struct scsi_qla_host *ha) DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n", ha->host_no, __func__)); - goto exit_validate_mac_no_free; + goto exit_get_sys_info_no_free; } memset(sys_info, 0, sizeof(*sys_info)); @@ -155,7 +186,7 @@ static int qla4xxx_validate_mac_address(struct scsi_qla_host *ha) DEBUG2(printk("scsi%ld: %s: get_flash FLASH_OFFSET_SYS_INFO " "failed\n", ha->host_no, __func__)); - goto exit_validate_mac; + goto exit_get_sys_info; } /* Save M.A.C. address & serial_number */ @@ -168,11 +199,11 @@ static int qla4xxx_validate_mac_address(struct scsi_qla_host *ha) status = QLA_SUCCESS; - exit_validate_mac: +exit_get_sys_info: dma_free_coherent(&ha->pdev->dev, sizeof(*sys_info), sys_info, sys_info_dma); - exit_validate_mac_no_free: +exit_get_sys_info_no_free: return status; } @@ -584,21 +615,19 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha, min(sizeof(ddb_entry->link_local_ipv6_addr), sizeof(fw_ddb_entry->link_local_ipv6_addr))); - DEBUG2(dev_info(&ha->pdev->dev, "%s: DDB[%d] osIdx = %d " - "State %04x ConnErr %08x IP %pI6 " + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: DDB[%d] State %04x" + " ConnErr %08x IP %pI6 " ":%04d \"%s\"\n", __func__, fw_ddb_index, - ddb_entry->os_target_id, ddb_entry->fw_ddb_device_state, conn_err, fw_ddb_entry->ip_addr, le16_to_cpu(fw_ddb_entry->port), fw_ddb_entry->iscsi_name)); } else - DEBUG2(dev_info(&ha->pdev->dev, "%s: DDB[%d] osIdx = %d " - "State %04x ConnErr %08x IP %pI4 " + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: DDB[%d] State %04x" + " ConnErr %08x IP %pI4 " ":%04d \"%s\"\n", __func__, fw_ddb_index, - ddb_entry->os_target_id, ddb_entry->fw_ddb_device_state, conn_err, fw_ddb_entry->ip_addr, le16_to_cpu(fw_ddb_entry->port), @@ -984,7 +1013,7 @@ static int qla4xxx_initialize_ddb_list(struct scsi_qla_host *ha) } /** - * qla4xxx_update_ddb_list - update the driver ddb list + * qla4xxx_reinitialize_ddb_list - update the driver ddb list * @ha: pointer to host adapter structure. * * This routine obtains device information from the F/W database after @@ -1028,7 +1057,7 @@ int qla4xxx_relogin_device(struct scsi_qla_host *ha, (uint16_t)RELOGIN_TOV); atomic_set(&ddb_entry->relogin_timer, relogin_timer); - DEBUG2(printk("scsi%ld: Relogin index [%d]. TOV=%d\n", ha->host_no, + DEBUG2(printk("scsi%ld: Relogin ddb [%d]. TOV=%d\n", ha->host_no, ddb_entry->fw_ddb_index, relogin_timer)); qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index, 0); @@ -1085,7 +1114,16 @@ static int qla4xxx_config_nvram(struct scsi_qla_host *ha) return QLA_SUCCESS; } -static void qla4x00_pci_config(struct scsi_qla_host *ha) +/** + * qla4_8xxx_pci_config() - Setup ISP82xx PCI configuration registers. + * @ha: HA context + */ +void qla4_8xxx_pci_config(struct scsi_qla_host *ha) +{ + pci_set_master(ha->pdev); +} + +void qla4xxx_pci_config(struct scsi_qla_host *ha) { uint16_t w; int status; @@ -1216,7 +1254,7 @@ int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a) * This routine performs the necessary steps to start the firmware for * the QLA4010 adapter. **/ -static int qla4xxx_start_firmware(struct scsi_qla_host *ha) +int qla4xxx_start_firmware(struct scsi_qla_host *ha) { unsigned long flags = 0; uint32_t mbox_status; @@ -1295,7 +1333,8 @@ static int qla4xxx_start_firmware(struct scsi_qla_host *ha) if (soft_reset) { DEBUG(printk("scsi%ld: %s: Issue Soft Reset\n", ha->host_no, __func__)); - status = qla4xxx_soft_reset(ha); + status = qla4xxx_soft_reset(ha); /* NOTE: acquires drvr + * lock again, but ok */ if (status == QLA_ERROR) { DEBUG(printk("scsi%d: %s: Soft Reset failed!\n", ha->host_no, __func__)); @@ -1316,7 +1355,6 @@ static int qla4xxx_start_firmware(struct scsi_qla_host *ha) ql4xxx_unlock_drvr(ha); if (status == QLA_SUCCESS) { - qla4xxx_get_fw_version(ha); if (test_and_clear_bit(AF_GET_CRASH_RECORD, &ha->flags)) qla4xxx_get_crash_record(ha); } else { @@ -1343,18 +1381,21 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int status = QLA_ERROR; int8_t ip_address[IP_ADDR_LEN] = {0} ; - clear_bit(AF_ONLINE, &ha->flags); ha->eeprom_cmd_data = 0; - qla4x00_pci_config(ha); + ql4_printk(KERN_INFO, ha, "Configuring PCI space...\n"); + ha->isp_ops->pci_config(ha); - qla4xxx_disable_intrs(ha); + ha->isp_ops->disable_intrs(ha); /* Initialize the Host adapter request/response queues and firmware */ - if (qla4xxx_start_firmware(ha) == QLA_ERROR) + if (ha->isp_ops->start_firmware(ha) == QLA_ERROR) + goto exit_init_hba; + + if (qla4xxx_get_fw_version(ha) == QLA_ERROR) goto exit_init_hba; - if (qla4xxx_validate_mac_address(ha) == QLA_ERROR) + if (ha->isp_ops->get_sys_info(ha) == QLA_ERROR) goto exit_init_hba; if (qla4xxx_init_local_data(ha) == QLA_ERROR) @@ -1407,6 +1448,8 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, exit_init_online: set_bit(AF_ONLINE, &ha->flags); exit_init_hba: + DEBUG2(printk("scsi%ld: initialize adapter: %s\n", ha->host_no, + status == QLA_ERROR ? "FAILED" : "SUCCEDED")); return status; } @@ -1558,9 +1601,20 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, atomic_set(&ddb_entry->relogin_timer, 0); atomic_set(&ddb_entry->retry_relogin_timer, ddb_entry->default_time2wait + 4); + DEBUG(printk("scsi%ld: %s: ddb[%d] " + "initiate relogin after %d seconds\n", + ha->host_no, __func__, + ddb_entry->fw_ddb_index, + ddb_entry->default_time2wait + 4)); + } else { + DEBUG(printk("scsi%ld: %s: ddb[%d] " + "relogin not initiated, state = %d, " + "ddb_entry->flags = 0x%lx\n", + ha->host_no, __func__, + ddb_entry->fw_ddb_index, + ddb_entry->fw_ddb_device_state, + ddb_entry->flags)); } } - return QLA_SUCCESS; } - diff --git a/drivers/scsi/qla4xxx/ql4_inline.h b/drivers/scsi/qla4xxx/ql4_inline.h index 6375eb017dd3c115f9fd21d59747359a4edb9ab4..9471ac75500092cd4a47fb81e3674a7a7983d2b2 100644 --- a/drivers/scsi/qla4xxx/ql4_inline.h +++ b/drivers/scsi/qla4xxx/ql4_inline.h @@ -29,7 +29,7 @@ qla4xxx_lookup_ddb_by_fw_index(struct scsi_qla_host *ha, uint32_t fw_ddb_index) ddb_entry = ha->fw_ddb_index_map[fw_ddb_index]; } - DEBUG3(printk("scsi%d: %s: index [%d], ddb_entry = %p\n", + DEBUG3(printk("scsi%d: %s: ddb [%d], ddb_entry = %p\n", ha->host_no, __func__, fw_ddb_index, ddb_entry)); return ddb_entry; diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c index e66f3f263f49b78443e5aa7c272d64377377d6c3..f89973deac5ba6735d71a59bc57bc26649689838 100644 --- a/drivers/scsi/qla4xxx/ql4_iocb.c +++ b/drivers/scsi/qla4xxx/ql4_iocb.c @@ -108,8 +108,7 @@ int qla4xxx_send_marker_iocb(struct scsi_qla_host *ha, wmb(); /* Tell ISP it's got a new I/O request */ - writel(ha->request_in, &ha->reg->req_q_in); - readl(&ha->reg->req_q_in); + ha->isp_ops->queue_iocb(ha); exit_send_marker: spin_unlock_irqrestore(&ha->hardware_lock, flags); @@ -193,6 +192,72 @@ static void qla4xxx_build_scsi_iocbs(struct srb *srb, } } +/** + * qla4_8xxx_queue_iocb - Tell ISP it's got new request(s) + * @ha: pointer to host adapter structure. + * + * This routine notifies the ISP that one or more new request + * queue entries have been placed on the request queue. + **/ +void qla4_8xxx_queue_iocb(struct scsi_qla_host *ha) +{ + uint32_t dbval = 0; + unsigned long wtime; + + dbval = 0x14 | (ha->func_num << 5); + dbval = dbval | (0 << 8) | (ha->request_in << 16); + writel(dbval, (unsigned long __iomem *)ha->nx_db_wr_ptr); + wmb(); + + wtime = jiffies + (2 * HZ); + while (readl((void __iomem *)ha->nx_db_rd_ptr) != dbval && + !time_after_eq(jiffies, wtime)) { + writel(dbval, (unsigned long __iomem *)ha->nx_db_wr_ptr); + wmb(); + } +} + +/** + * qla4_8xxx_complete_iocb - Tell ISP we're done with response(s) + * @ha: pointer to host adapter structure. + * + * This routine notifies the ISP that one or more response/completion + * queue entries have been processed by the driver. + * This also clears the interrupt. + **/ +void qla4_8xxx_complete_iocb(struct scsi_qla_host *ha) +{ + writel(ha->response_out, &ha->qla4_8xxx_reg->rsp_q_out); + readl(&ha->qla4_8xxx_reg->rsp_q_out); +} + +/** + * qla4xxx_queue_iocb - Tell ISP it's got new request(s) + * @ha: pointer to host adapter structure. + * + * This routine is notifies the ISP that one or more new request + * queue entries have been placed on the request queue. + **/ +void qla4xxx_queue_iocb(struct scsi_qla_host *ha) +{ + writel(ha->request_in, &ha->reg->req_q_in); + readl(&ha->reg->req_q_in); +} + +/** + * qla4xxx_complete_iocb - Tell ISP we're done with response(s) + * @ha: pointer to host adapter structure. + * + * This routine is notifies the ISP that one or more response/completion + * queue entries have been processed by the driver. + * This also clears the interrupt. + **/ +void qla4xxx_complete_iocb(struct scsi_qla_host *ha) +{ + writel(ha->response_out, &ha->reg->rsp_q_out); + readl(&ha->reg->rsp_q_out); +} + /** * qla4xxx_send_command_to_isp - issues command to HBA * @ha: pointer to host adapter structure. @@ -310,9 +375,7 @@ int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb) srb->iocb_cnt = req_cnt; ha->req_q_count -= req_cnt; - /* Debug print statements */ - writel(ha->request_in, &ha->reg->req_q_in); - readl(&ha->reg->req_q_in); + ha->isp_ops->queue_iocb(ha); spin_unlock_irqrestore(&ha->hardware_lock, flags); return QLA_SUCCESS; diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index 596c3031483c34f362fb979e613647711363bcf1..68d7942bf2e369b55b0eb20a2b2e6eb0cdb6b39e 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -118,7 +118,6 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha, srb = qla4xxx_del_from_active_array(ha, le32_to_cpu(sts_entry->handle)); if (!srb) { - /* FIXMEdg: Don't we need to reset ISP in this case??? */ DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Status Entry invalid " "handle 0x%x, sp=%p. This cmd may have already " "been completed.\n", ha->host_no, __func__, @@ -293,6 +292,10 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha, case SCS_DEVICE_LOGGED_OUT: case SCS_DEVICE_UNAVAILABLE: + DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%d: SCS_DEVICE " + "state: 0x%x\n", ha->host_no, + cmd->device->channel, cmd->device->id, + cmd->device->lun, sts_entry->completionStatus)); /* * Mark device missing so that we won't continue to * send I/O to this device. We should get a ddb @@ -339,16 +342,14 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha, * This routine process response queue completions in interrupt context. * Hardware_lock locked upon entry **/ -static void qla4xxx_process_response_queue(struct scsi_qla_host * ha) +void qla4xxx_process_response_queue(struct scsi_qla_host *ha) { uint32_t count = 0; struct srb *srb = NULL; struct status_entry *sts_entry; /* Process all responses from response queue */ - while ((ha->response_in = - (uint16_t)le32_to_cpu(ha->shadow_regs->rsp_q_in)) != - ha->response_out) { + while ((ha->response_ptr->signature != RESPONSE_PROCESSED)) { sts_entry = (struct status_entry *) ha->response_ptr; count++; @@ -413,14 +414,14 @@ static void qla4xxx_process_response_queue(struct scsi_qla_host * ha) sts_entry->hdr.entryType)); goto exit_prq_error; } + ((struct response *)sts_entry)->signature = RESPONSE_PROCESSED; + wmb(); } /* - * Done with responses, update the ISP For QLA4010, this also clears - * the interrupt. + * Tell ISP we're done with response(s). This also clears the interrupt. */ - writel(ha->response_out, &ha->reg->rsp_q_out); - readl(&ha->reg->rsp_q_out); + ha->isp_ops->complete_iocb(ha); return; @@ -430,9 +431,7 @@ static void qla4xxx_process_response_queue(struct scsi_qla_host * ha) sts_entry->completionStatus)); exit_prq_error: - writel(ha->response_out, &ha->reg->rsp_q_out); - readl(&ha->reg->rsp_q_out); - + ha->isp_ops->complete_iocb(ha); set_bit(DPC_RESET_HA, &ha->dpc_flags); } @@ -448,7 +447,7 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, uint32_t mbox_status) { int i; - uint32_t mbox_stat2, mbox_stat3; + uint32_t mbox_sts[MBOX_AEN_REG_COUNT]; if ((mbox_status == MBOX_STS_BUSY) || (mbox_status == MBOX_STS_INTERMEDIATE_COMPLETION) || @@ -460,27 +459,37 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, * Copy all mailbox registers to a temporary * location and set mailbox command done flag */ - for (i = 1; i < ha->mbox_status_count; i++) - ha->mbox_status[i] = - readl(&ha->reg->mailbox[i]); + for (i = 0; i < ha->mbox_status_count; i++) + ha->mbox_status[i] = is_qla8022(ha) + ? readl(&ha->qla4_8xxx_reg->mailbox_out[i]) + : readl(&ha->reg->mailbox[i]); set_bit(AF_MBOX_COMMAND_DONE, &ha->flags); + + if (test_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags)) + complete(&ha->mbx_intr_comp); } } else if (mbox_status >> 12 == MBOX_ASYNC_EVENT_STATUS) { + for (i = 0; i < MBOX_AEN_REG_COUNT; i++) + mbox_sts[i] = is_qla8022(ha) + ? readl(&ha->qla4_8xxx_reg->mailbox_out[i]) + : readl(&ha->reg->mailbox[i]); + /* Immediately process the AENs that don't require much work. * Only queue the database_changed AENs */ if (ha->aen_log.count < MAX_AEN_ENTRIES) { for (i = 0; i < MBOX_AEN_REG_COUNT; i++) ha->aen_log.entry[ha->aen_log.count].mbox_sts[i] = - readl(&ha->reg->mailbox[i]); + mbox_sts[i]; ha->aen_log.count++; } switch (mbox_status) { case MBOX_ASTS_SYSTEM_ERROR: /* Log Mailbox registers */ + ql4_printk(KERN_INFO, ha, "%s: System Err\n", __func__); if (ql4xdontresethba) { - DEBUG2(printk("%s:Dont Reset HBA\n", - __func__)); + DEBUG2(printk("scsi%ld: %s:Don't Reset HBA\n", + ha->host_no, __func__)); } else { set_bit(AF_GET_CRASH_RECORD, &ha->flags); set_bit(DPC_RESET_HA, &ha->dpc_flags); @@ -502,18 +511,15 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, if (test_bit(AF_INIT_DONE, &ha->flags)) set_bit(DPC_LINK_CHANGED, &ha->dpc_flags); - DEBUG2(printk(KERN_INFO "scsi%ld: AEN %04x Adapter" - " LINK UP\n", ha->host_no, - mbox_status)); + ql4_printk(KERN_INFO, ha, "%s: LINK UP\n", __func__); break; case MBOX_ASTS_LINK_DOWN: clear_bit(AF_LINK_UP, &ha->flags); - set_bit(DPC_LINK_CHANGED, &ha->dpc_flags); + if (test_bit(AF_INIT_DONE, &ha->flags)) + set_bit(DPC_LINK_CHANGED, &ha->dpc_flags); - DEBUG2(printk(KERN_INFO "scsi%ld: AEN %04x Adapter" - " LINK DOWN\n", ha->host_no, - mbox_status)); + ql4_printk(KERN_INFO, ha, "%s: LINK DOWN\n", __func__); break; case MBOX_ASTS_HEARTBEAT: @@ -539,12 +545,17 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, break; case MBOX_ASTS_IP_ADDR_STATE_CHANGED: - mbox_stat2 = readl(&ha->reg->mailbox[2]); - mbox_stat3 = readl(&ha->reg->mailbox[3]); - - if ((mbox_stat3 == 5) && (mbox_stat2 == 3)) + printk("scsi%ld: AEN %04x, mbox_sts[2]=%04x, " + "mbox_sts[3]=%04x\n", ha->host_no, mbox_sts[0], + mbox_sts[2], mbox_sts[3]); + + /* mbox_sts[2] = Old ACB state + * mbox_sts[3] = new ACB state */ + if ((mbox_sts[3] == ACB_STATE_VALID) && + (mbox_sts[2] == ACB_STATE_TENTATIVE)) set_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags); - else if ((mbox_stat3 == 2) && (mbox_stat2 == 5)) + else if ((mbox_sts[3] == ACB_STATE_ACQUIRING) && + (mbox_sts[2] == ACB_STATE_VALID)) set_bit(DPC_RESET_HA, &ha->dpc_flags); break; @@ -553,9 +564,8 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, /* No action */ DEBUG2(printk(KERN_INFO "scsi%ld: AEN %04x, " "mbox_sts[1]=%04x, mbox_sts[2]=%04x\n", - ha->host_no, mbox_status, - readl(&ha->reg->mailbox[1]), - readl(&ha->reg->mailbox[2]))); + ha->host_no, mbox_sts[0], + mbox_sts[1], mbox_sts[2])); break; case MBOX_ASTS_SELF_TEST_FAILED: @@ -563,10 +573,8 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, /* No action */ DEBUG2(printk("scsi%ld: AEN %04x, mbox_sts[1]=%04x, " "mbox_sts[2]=%04x, mbox_sts[3]=%04x\n", - ha->host_no, mbox_status, - readl(&ha->reg->mailbox[1]), - readl(&ha->reg->mailbox[2]), - readl(&ha->reg->mailbox[3]))); + ha->host_no, mbox_sts[0], mbox_sts[1], + mbox_sts[2], mbox_sts[3])); break; case MBOX_ASTS_DATABASE_CHANGED: @@ -577,21 +585,17 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, /* decrement available counter */ ha->aen_q_count--; - for (i = 1; i < MBOX_AEN_REG_COUNT; i++) + for (i = 0; i < MBOX_AEN_REG_COUNT; i++) ha->aen_q[ha->aen_in].mbox_sts[i] = - readl(&ha->reg->mailbox[i]); - - ha->aen_q[ha->aen_in].mbox_sts[0] = mbox_status; + mbox_sts[i]; /* print debug message */ DEBUG2(printk("scsi%ld: AEN[%d] %04x queued" - " mb1:0x%x mb2:0x%x mb3:0x%x mb4:0x%x\n", - ha->host_no, ha->aen_in, - mbox_status, - ha->aen_q[ha->aen_in].mbox_sts[1], - ha->aen_q[ha->aen_in].mbox_sts[2], - ha->aen_q[ha->aen_in].mbox_sts[3], - ha->aen_q[ha->aen_in]. mbox_sts[4])); + " mb1:0x%x mb2:0x%x mb3:0x%x mb4:0x%x\n", + ha->host_no, ha->aen_in, mbox_sts[0], + mbox_sts[1], mbox_sts[2], mbox_sts[3], + mbox_sts[4])); + /* advance pointer */ ha->aen_in++; if (ha->aen_in == MAX_AEN_ENTRIES) @@ -603,18 +607,16 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, DEBUG2(printk("scsi%ld: %s: aen %04x, queue " "overflowed! AEN LOST!!\n", ha->host_no, __func__, - mbox_status)); + mbox_sts[0])); DEBUG2(printk("scsi%ld: DUMP AEN QUEUE\n", ha->host_no)); for (i = 0; i < MAX_AEN_ENTRIES; i++) { DEBUG2(printk("AEN[%d] %04x %04x %04x " - "%04x\n", i, - ha->aen_q[i].mbox_sts[0], - ha->aen_q[i].mbox_sts[1], - ha->aen_q[i].mbox_sts[2], - ha->aen_q[i].mbox_sts[3])); + "%04x\n", i, mbox_sts[0], + mbox_sts[1], mbox_sts[2], + mbox_sts[3])); } } break; @@ -622,7 +624,7 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, default: DEBUG2(printk(KERN_WARNING "scsi%ld: AEN %04x UNKNOWN\n", - ha->host_no, mbox_status)); + ha->host_no, mbox_sts[0])); break; } } else { @@ -633,6 +635,30 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, } } +/** + * qla4_8xxx_interrupt_service_routine - isr + * @ha: pointer to host adapter structure. + * + * This is the main interrupt service routine. + * hardware_lock locked upon entry. runs in interrupt context. + **/ +void qla4_8xxx_interrupt_service_routine(struct scsi_qla_host *ha, + uint32_t intr_status) +{ + /* Process response queue interrupt. */ + if (intr_status & HSRX_RISC_IOCB_INT) + qla4xxx_process_response_queue(ha); + + /* Process mailbox/asynch event interrupt.*/ + if (intr_status & HSRX_RISC_MB_INT) + qla4xxx_isr_decode_mailbox(ha, + readl(&ha->qla4_8xxx_reg->mailbox_out[0])); + + /* clear the interrupt */ + writel(0, &ha->qla4_8xxx_reg->host_int); + readl(&ha->qla4_8xxx_reg->host_int); +} + /** * qla4xxx_interrupt_service_routine - isr * @ha: pointer to host adapter structure. @@ -659,6 +685,28 @@ void qla4xxx_interrupt_service_routine(struct scsi_qla_host * ha, } } +/** + * qla4_8xxx_spurious_interrupt - processes spurious interrupt + * @ha: pointer to host adapter structure. + * @reqs_count: . + * + **/ +static void qla4_8xxx_spurious_interrupt(struct scsi_qla_host *ha, + uint8_t reqs_count) +{ + if (reqs_count) + return; + + DEBUG2(ql4_printk(KERN_INFO, ha, "Spurious Interrupt\n")); + if (is_qla8022(ha)) { + writel(0, &ha->qla4_8xxx_reg->host_int); + if (test_bit(AF_INTx_ENABLED, &ha->flags)) + qla4_8xxx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, + 0xfbff); + } + ha->spurious_int_count++; +} + /** * qla4xxx_intr_handler - hardware interrupt handler. * @irq: Unused @@ -689,15 +737,14 @@ irqreturn_t qla4xxx_intr_handler(int irq, void *dev_id) /* * Read interrupt status */ - if (le32_to_cpu(ha->shadow_regs->rsp_q_in) != + if (ha->isp_ops->rd_shdw_rsp_q_in(ha) != ha->response_out) intr_status = CSR_SCSI_COMPLETION_INTR; else intr_status = readl(&ha->reg->ctrl_status); if ((intr_status & - (CSR_SCSI_RESET_INTR|CSR_FATAL_ERROR|INTR_PENDING)) == - 0) { + (CSR_SCSI_RESET_INTR|CSR_FATAL_ERROR|INTR_PENDING)) == 0) { if (reqs_count == 0) ha->spurious_int_count++; break; @@ -739,22 +786,159 @@ irqreturn_t qla4xxx_intr_handler(int irq, void *dev_id) &ha->reg->ctrl_status); readl(&ha->reg->ctrl_status); - if (!ql4_mod_unload) + if (!test_bit(AF_HBA_GOING_AWAY, &ha->flags)) set_bit(DPC_RESET_HA_INTR, &ha->dpc_flags); break; } else if (intr_status & INTR_PENDING) { - qla4xxx_interrupt_service_routine(ha, intr_status); + ha->isp_ops->interrupt_service_routine(ha, intr_status); ha->total_io_count++; if (++reqs_count == MAX_REQS_SERVICED_PER_INTR) break; + } + } + + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + return IRQ_HANDLED; +} + +/** + * qla4_8xxx_intr_handler - hardware interrupt handler. + * @irq: Unused + * @dev_id: Pointer to host adapter structure + **/ +irqreturn_t qla4_8xxx_intr_handler(int irq, void *dev_id) +{ + struct scsi_qla_host *ha = dev_id; + uint32_t intr_status; + uint32_t status; + unsigned long flags = 0; + uint8_t reqs_count = 0; + + ha->isr_count++; + status = qla4_8xxx_rd_32(ha, ISR_INT_VECTOR); + if (!(status & ha->nx_legacy_intr.int_vec_bit)) + return IRQ_NONE; + + status = qla4_8xxx_rd_32(ha, ISR_INT_STATE_REG); + if (!ISR_IS_LEGACY_INTR_TRIGGERED(status)) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s legacy Int not triggered\n", __func__)); + return IRQ_NONE; + } + + /* clear the interrupt */ + qla4_8xxx_wr_32(ha, ha->nx_legacy_intr.tgt_status_reg, 0xffffffff); + + /* read twice to ensure write is flushed */ + qla4_8xxx_rd_32(ha, ISR_INT_VECTOR); + qla4_8xxx_rd_32(ha, ISR_INT_VECTOR); + + spin_lock_irqsave(&ha->hardware_lock, flags); + while (1) { + if (!(readl(&ha->qla4_8xxx_reg->host_int) & + ISRX_82XX_RISC_INT)) { + qla4_8xxx_spurious_interrupt(ha, reqs_count); + break; + } + intr_status = readl(&ha->qla4_8xxx_reg->host_status); + if ((intr_status & + (HSRX_RISC_MB_INT | HSRX_RISC_IOCB_INT)) == 0) { + qla4_8xxx_spurious_interrupt(ha, reqs_count); + break; + } + + ha->isp_ops->interrupt_service_routine(ha, intr_status); + + /* Enable Interrupt */ + qla4_8xxx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, 0xfbff); - intr_status = 0; + if (++reqs_count == MAX_REQS_SERVICED_PER_INTR) + break; + } + + spin_unlock_irqrestore(&ha->hardware_lock, flags); + return IRQ_HANDLED; +} + +irqreturn_t +qla4_8xxx_msi_handler(int irq, void *dev_id) +{ + struct scsi_qla_host *ha; + + ha = (struct scsi_qla_host *) dev_id; + if (!ha) { + DEBUG2(printk(KERN_INFO + "qla4xxx: MSIX: Interrupt with NULL host ptr\n")); + return IRQ_NONE; + } + + ha->isr_count++; + /* clear the interrupt */ + qla4_8xxx_wr_32(ha, ha->nx_legacy_intr.tgt_status_reg, 0xffffffff); + + /* read twice to ensure write is flushed */ + qla4_8xxx_rd_32(ha, ISR_INT_VECTOR); + qla4_8xxx_rd_32(ha, ISR_INT_VECTOR); + + return qla4_8xxx_default_intr_handler(irq, dev_id); +} + +/** + * qla4_8xxx_default_intr_handler - hardware interrupt handler. + * @irq: Unused + * @dev_id: Pointer to host adapter structure + * + * This interrupt handler is called directly for MSI-X, and + * called indirectly for MSI. + **/ +irqreturn_t +qla4_8xxx_default_intr_handler(int irq, void *dev_id) +{ + struct scsi_qla_host *ha = dev_id; + unsigned long flags; + uint32_t intr_status; + uint8_t reqs_count = 0; + + spin_lock_irqsave(&ha->hardware_lock, flags); + while (1) { + if (!(readl(&ha->qla4_8xxx_reg->host_int) & + ISRX_82XX_RISC_INT)) { + qla4_8xxx_spurious_interrupt(ha, reqs_count); + break; + } + + intr_status = readl(&ha->qla4_8xxx_reg->host_status); + if ((intr_status & + (HSRX_RISC_MB_INT | HSRX_RISC_IOCB_INT)) == 0) { + qla4_8xxx_spurious_interrupt(ha, reqs_count); + break; } + + ha->isp_ops->interrupt_service_routine(ha, intr_status); + + if (++reqs_count == MAX_REQS_SERVICED_PER_INTR) + break; } + ha->isr_count++; spin_unlock_irqrestore(&ha->hardware_lock, flags); + return IRQ_HANDLED; +} +irqreturn_t +qla4_8xxx_msix_rsp_q(int irq, void *dev_id) +{ + struct scsi_qla_host *ha = dev_id; + unsigned long flags; + + spin_lock_irqsave(&ha->hardware_lock, flags); + qla4xxx_process_response_queue(ha); + writel(0, &ha->qla4_8xxx_reg->host_int); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + ha->isr_count++; return IRQ_HANDLED; } @@ -825,7 +1009,7 @@ void qla4xxx_process_aen(struct scsi_qla_host * ha, uint8_t process_aen) ((ddb_entry->default_time2wait + 4) * HZ); - DEBUG2(printk("scsi%ld: ddb index [%d] initate" + DEBUG2(printk("scsi%ld: ddb [%d] initate" " RELOGIN after %d seconds\n", ha->host_no, ddb_entry->fw_ddb_index, @@ -847,3 +1031,81 @@ void qla4xxx_process_aen(struct scsi_qla_host * ha, uint8_t process_aen) spin_unlock_irqrestore(&ha->hardware_lock, flags); } +int qla4xxx_request_irqs(struct scsi_qla_host *ha) +{ + int ret; + + if (!is_qla8022(ha)) + goto try_intx; + + if (ql4xenablemsix == 2) + goto try_msi; + + if (ql4xenablemsix == 0 || ql4xenablemsix != 1) + goto try_intx; + + /* Trying MSI-X */ + ret = qla4_8xxx_enable_msix(ha); + if (!ret) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "MSI-X: Enabled (0x%X).\n", ha->revision_id)); + goto irq_attached; + } + + ql4_printk(KERN_WARNING, ha, + "MSI-X: Falling back-to MSI mode -- %d.\n", ret); + +try_msi: + /* Trying MSI */ + ret = pci_enable_msi(ha->pdev); + if (!ret) { + ret = request_irq(ha->pdev->irq, qla4_8xxx_msi_handler, + IRQF_DISABLED|IRQF_SHARED, DRIVER_NAME, ha); + if (!ret) { + DEBUG2(ql4_printk(KERN_INFO, ha, "MSI: Enabled.\n")); + set_bit(AF_MSI_ENABLED, &ha->flags); + goto irq_attached; + } else { + ql4_printk(KERN_WARNING, ha, + "MSI: Failed to reserve interrupt %d " + "already in use.\n", ha->pdev->irq); + pci_disable_msi(ha->pdev); + } + } + ql4_printk(KERN_WARNING, ha, + "MSI: Falling back-to INTx mode -- %d.\n", ret); + +try_intx: + /* Trying INTx */ + ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler, + IRQF_DISABLED|IRQF_SHARED, DRIVER_NAME, ha); + if (!ret) { + DEBUG2(ql4_printk(KERN_INFO, ha, "INTx: Enabled.\n")); + set_bit(AF_INTx_ENABLED, &ha->flags); + goto irq_attached; + + } else { + ql4_printk(KERN_WARNING, ha, + "INTx: Failed to reserve interrupt %d already in" + " use.\n", ha->pdev->irq); + return ret; + } + +irq_attached: + set_bit(AF_IRQ_ATTACHED, &ha->flags); + ha->host->irq = ha->pdev->irq; + ql4_printk(KERN_INFO, ha, "%s: irq %d attached\n", + __func__, ha->pdev->irq); + return ret; +} + +void qla4xxx_free_irqs(struct scsi_qla_host *ha) +{ + if (test_bit(AF_MSIX_ENABLED, &ha->flags)) + qla4_8xxx_disable_msix(ha); + else if (test_and_clear_bit(AF_MSI_ENABLED, &ha->flags)) { + free_irq(ha->pdev->irq, ha); + pci_disable_msi(ha->pdev); + } else if (test_and_clear_bit(AF_INTx_ENABLED, &ha->flags)) + free_irq(ha->pdev->irq, ha); +} diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index 54db6cbbd9423f8b92c0387064890b471017e0db..0d3a65268419aecf9dd8cffee2da6297a4ac8d28 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -19,13 +19,13 @@ * @mbx_cmd: data pointer for mailbox in registers. * @mbx_sts: data pointer for mailbox out registers. * - * This routine sssue mailbox commands and waits for completion. + * This routine isssue mailbox commands and waits for completion. * If outCount is 0, this routine completes successfully WITHOUT waiting * for the mailbox command to complete. **/ -static int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, - uint8_t outCount, uint32_t *mbx_cmd, - uint32_t *mbx_sts) +int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, + uint8_t outCount, uint32_t *mbx_cmd, + uint32_t *mbx_sts) { int status = QLA_ERROR; uint8_t i; @@ -59,32 +59,66 @@ static int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, } /* To prevent overwriting mailbox registers for a command that has - * not yet been serviced, check to see if a previously issued - * mailbox command is interrupting. + * not yet been serviced, check to see if an active command + * (AEN, IOCB, etc.) is interrupting, then service it. * ----------------------------------------------------------------- */ spin_lock_irqsave(&ha->hardware_lock, flags); - intr_status = readl(&ha->reg->ctrl_status); - if (intr_status & CSR_SCSI_PROCESSOR_INTR) { - /* Service existing interrupt */ - qla4xxx_interrupt_service_routine(ha, intr_status); - clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags); + + if (is_qla8022(ha)) { + intr_status = readl(&ha->qla4_8xxx_reg->host_int); + if (intr_status & ISRX_82XX_RISC_INT) { + /* Service existing interrupt */ + DEBUG2(printk("scsi%ld: %s: " + "servicing existing interrupt\n", + ha->host_no, __func__)); + intr_status = readl(&ha->qla4_8xxx_reg->host_status); + ha->isp_ops->interrupt_service_routine(ha, intr_status); + clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags); + if (test_bit(AF_INTERRUPTS_ON, &ha->flags) && + test_bit(AF_INTx_ENABLED, &ha->flags)) + qla4_8xxx_wr_32(ha, + ha->nx_legacy_intr.tgt_mask_reg, + 0xfbff); + } + } else { + intr_status = readl(&ha->reg->ctrl_status); + if (intr_status & CSR_SCSI_PROCESSOR_INTR) { + /* Service existing interrupt */ + ha->isp_ops->interrupt_service_routine(ha, intr_status); + clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags); + } } - /* Send the mailbox command to the firmware */ ha->mbox_status_count = outCount; for (i = 0; i < outCount; i++) ha->mbox_status[i] = 0; - /* Load all mailbox registers, except mailbox 0. */ - for (i = 1; i < inCount; i++) - writel(mbx_cmd[i], &ha->reg->mailbox[i]); + if (is_qla8022(ha)) { + /* Load all mailbox registers, except mailbox 0. */ + DEBUG5( + printk("scsi%ld: %s: Cmd ", ha->host_no, __func__); + for (i = 0; i < inCount; i++) + printk("mb%d=%04x ", i, mbx_cmd[i]); + printk("\n")); + + for (i = 1; i < inCount; i++) + writel(mbx_cmd[i], &ha->qla4_8xxx_reg->mailbox_in[i]); + writel(mbx_cmd[0], &ha->qla4_8xxx_reg->mailbox_in[0]); + readl(&ha->qla4_8xxx_reg->mailbox_in[0]); + writel(HINT_MBX_INT_PENDING, &ha->qla4_8xxx_reg->hint); + } else { + /* Load all mailbox registers, except mailbox 0. */ + for (i = 1; i < inCount; i++) + writel(mbx_cmd[i], &ha->reg->mailbox[i]); + + /* Wakeup firmware */ + writel(mbx_cmd[0], &ha->reg->mailbox[0]); + readl(&ha->reg->mailbox[0]); + writel(set_rmask(CSR_INTR_RISC), &ha->reg->ctrl_status); + readl(&ha->reg->ctrl_status); + } - /* Wakeup firmware */ - writel(mbx_cmd[0], &ha->reg->mailbox[0]); - readl(&ha->reg->mailbox[0]); - writel(set_rmask(CSR_INTR_RISC), &ha->reg->ctrl_status); - readl(&ha->reg->ctrl_status); spin_unlock_irqrestore(&ha->hardware_lock, flags); /* Wait for completion */ @@ -98,26 +132,66 @@ static int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, status = QLA_SUCCESS; goto mbox_exit; } - /* Wait for command to complete */ - wait_count = jiffies + MBOX_TOV * HZ; - while (test_bit(AF_MBOX_COMMAND_DONE, &ha->flags) == 0) { - if (time_after_eq(jiffies, wait_count)) - break; - spin_lock_irqsave(&ha->hardware_lock, flags); - intr_status = readl(&ha->reg->ctrl_status); - if (intr_status & INTR_PENDING) { + /* + * Wait for completion: Poll or completion queue + */ + if (test_bit(AF_IRQ_ATTACHED, &ha->flags) && + test_bit(AF_INTERRUPTS_ON, &ha->flags) && + test_bit(AF_ONLINE, &ha->flags) && + !test_bit(AF_HBA_GOING_AWAY, &ha->flags)) { + /* Do not poll for completion. Use completion queue */ + set_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags); + wait_for_completion_timeout(&ha->mbx_intr_comp, MBOX_TOV * HZ); + clear_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags); + } else { + /* Poll for command to complete */ + wait_count = jiffies + MBOX_TOV * HZ; + while (test_bit(AF_MBOX_COMMAND_DONE, &ha->flags) == 0) { + if (time_after_eq(jiffies, wait_count)) + break; /* * Service the interrupt. * The ISR will save the mailbox status registers * to a temporary storage location in the adapter * structure. */ - ha->mbox_status_count = outCount; - qla4xxx_interrupt_service_routine(ha, intr_status); + + spin_lock_irqsave(&ha->hardware_lock, flags); + if (is_qla8022(ha)) { + intr_status = + readl(&ha->qla4_8xxx_reg->host_int); + if (intr_status & ISRX_82XX_RISC_INT) { + ha->mbox_status_count = outCount; + intr_status = + readl(&ha->qla4_8xxx_reg->host_status); + ha->isp_ops->interrupt_service_routine( + ha, intr_status); + if (test_bit(AF_INTERRUPTS_ON, + &ha->flags) && + test_bit(AF_INTx_ENABLED, + &ha->flags)) + qla4_8xxx_wr_32(ha, + ha->nx_legacy_intr.tgt_mask_reg, + 0xfbff); + } + } else { + intr_status = readl(&ha->reg->ctrl_status); + if (intr_status & INTR_PENDING) { + /* + * Service the interrupt. + * The ISR will save the mailbox status + * registers to a temporary storage + * location in the adapter structure. + */ + ha->mbox_status_count = outCount; + ha->isp_ops->interrupt_service_routine( + ha, intr_status); + } + } + spin_unlock_irqrestore(&ha->hardware_lock, flags); + msleep(10); } - spin_unlock_irqrestore(&ha->hardware_lock, flags); - msleep(10); } /* Check for mailbox timeout. */ @@ -172,7 +246,7 @@ static int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, return status; } -uint8_t +static uint8_t qla4xxx_set_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd, uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma) { @@ -196,7 +270,7 @@ qla4xxx_set_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd, return QLA_SUCCESS; } -uint8_t +static uint8_t qla4xxx_get_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd, uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma) { @@ -218,7 +292,7 @@ qla4xxx_get_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd, return QLA_SUCCESS; } -void +static void qla4xxx_update_local_ip(struct scsi_qla_host *ha, struct addr_ctrl_blk *init_fw_cb) { @@ -256,7 +330,7 @@ qla4xxx_update_local_ip(struct scsi_qla_host *ha, } } -uint8_t +static uint8_t qla4xxx_update_local_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd, uint32_t *mbox_sts, @@ -445,7 +519,7 @@ int qla4xxx_get_firmware_state(struct scsi_qla_host * ha) DEBUG2(printk("scsi%ld: %s firmware_state=0x%x\n", ha->host_no, __func__, ha->firmware_state);) - return QLA_SUCCESS; + return QLA_SUCCESS; } /** @@ -470,6 +544,10 @@ int qla4xxx_get_firmware_status(struct scsi_qla_host * ha) mbox_sts[0])); return QLA_ERROR; } + + ql4_printk(KERN_INFO, ha, "%ld firmare IOCBs available (%d).\n", + ha->host_no, mbox_cmd[2]); + return QLA_SUCCESS; } @@ -500,7 +578,7 @@ int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha, /* Make sure the device index is valid */ if (fw_ddb_index >= MAX_DDB_ENTRIES) { - DEBUG2(printk("scsi%ld: %s: index [%d] out of range.\n", + DEBUG2(printk("scsi%ld: %s: ddb [%d] out of range.\n", ha->host_no, __func__, fw_ddb_index)); goto exit_get_fwddb; } @@ -521,7 +599,7 @@ int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha, goto exit_get_fwddb; } if (fw_ddb_index != mbox_sts[1]) { - DEBUG2(printk("scsi%ld: %s: index mismatch [%d] != [%d].\n", + DEBUG2(printk("scsi%ld: %s: ddb mismatch [%d] != [%d].\n", ha->host_no, __func__, fw_ddb_index, mbox_sts[1])); goto exit_get_fwddb; @@ -590,6 +668,7 @@ int qla4xxx_set_ddb_entry(struct scsi_qla_host * ha, uint16_t fw_ddb_index, { uint32_t mbox_cmd[MBOX_REG_COUNT]; uint32_t mbox_sts[MBOX_REG_COUNT]; + int status; /* Do not wait for completion. The firmware will send us an * ASTS_DATABASE_CHANGED (0x8014) to notify us of the login status. @@ -603,7 +682,12 @@ int qla4xxx_set_ddb_entry(struct scsi_qla_host * ha, uint16_t fw_ddb_index, mbox_cmd[3] = MSDW(fw_ddb_entry_dma); mbox_cmd[4] = sizeof(struct dev_db_entry); - return qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]); + status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], + &mbox_sts[0]); + DEBUG2(printk("scsi%ld: %s: status=%d mbx0=0x%x mbx4=0x%x\n", + ha->host_no, __func__, status, mbox_sts[0], mbox_sts[4]);) + + return status; } /** @@ -817,8 +901,8 @@ int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb) /** * qla4xxx_reset_lun - issues LUN Reset * @ha: Pointer to host adapter structure. - * @db_entry: Pointer to device database entry - * @un_entry: Pointer to lun entry structure + * @ddb_entry: Pointer to device database entry + * @lun: lun number * * This routine performs a LUN RESET on the specified target/lun. * The caller must ensure that the ddb_entry and lun_entry pointers @@ -832,7 +916,7 @@ int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry, int status = QLA_SUCCESS; DEBUG2(printk("scsi%ld:%d:%d: lun reset issued\n", ha->host_no, - ddb_entry->os_target_id, lun)); + ddb_entry->fw_ddb_index, lun)); /* * Send lun reset command to ISP, so that the ISP will return all @@ -872,7 +956,7 @@ int qla4xxx_reset_target(struct scsi_qla_host *ha, int status = QLA_SUCCESS; DEBUG2(printk("scsi%ld:%d: target reset issued\n", ha->host_no, - ddb_entry->os_target_id)); + ddb_entry->fw_ddb_index)); /* * Send target reset command to ISP, so that the ISP will return all diff --git a/drivers/scsi/qla4xxx/ql4_nvram.c b/drivers/scsi/qla4xxx/ql4_nvram.c index 7fe0482ecf034023ae3a82b14e88c6784f433266..f0d0fbf88aa239e320f45f84a853a7b1b414fe37 100644 --- a/drivers/scsi/qla4xxx/ql4_nvram.c +++ b/drivers/scsi/qla4xxx/ql4_nvram.c @@ -149,7 +149,7 @@ static int eeprom_readword(int eepromAddr, u16 * value, /* Hardware_lock must be set before calling */ u16 rd_nvram_word(struct scsi_qla_host * ha, int offset) { - u16 val; + u16 val = 0; /* NOTE: NVRAM uses half-word addresses */ eeprom_readword(offset, &val, ha); diff --git a/drivers/scsi/qla4xxx/ql4_nvram.h b/drivers/scsi/qla4xxx/ql4_nvram.h index b47b4fc59d834e1492adf5642b005764cb9f95fc..7a8fc66a760dfbbcf840a536e02871415a3f0826 100644 --- a/drivers/scsi/qla4xxx/ql4_nvram.h +++ b/drivers/scsi/qla4xxx/ql4_nvram.h @@ -8,9 +8,9 @@ #ifndef _QL4XNVRM_H_ #define _QL4XNVRM_H_ -/* +/** * AM29LV Flash definitions - */ + **/ #define FM93C56A_SIZE_8 0x100 #define FM93C56A_SIZE_16 0x80 #define FM93C66A_SIZE_8 0x200 @@ -19,7 +19,7 @@ #define FM93C56A_START 0x1 -// Commands +/* Commands */ #define FM93C56A_READ 0x2 #define FM93C56A_WEN 0x0 #define FM93C56A_WRITE 0x1 @@ -62,9 +62,9 @@ #define AUBURN_EEPROM_CLK_RISE 0x1 #define AUBURN_EEPROM_CLK_FALL 0x0 -/* */ +/**/ /* EEPROM format */ -/* */ +/**/ struct bios_params { uint16_t SpinUpDelay:1; uint16_t BIOSDisable:1; diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c new file mode 100644 index 0000000000000000000000000000000000000000..3e119ae78397312850849e5e8496cb75f9bc144d --- /dev/null +++ b/drivers/scsi/qla4xxx/ql4_nx.c @@ -0,0 +1,2321 @@ +/* + * QLogic iSCSI HBA Driver + * Copyright (c) 2003-2009 QLogic Corporation + * + * See LICENSE.qla4xxx for copyright and licensing details. + */ +#include +#include +#include "ql4_def.h" +#include "ql4_glbl.h" + +#define MASK(n) DMA_BIT_MASK(n) +#define MN_WIN(addr) (((addr & 0x1fc0000) >> 1) | ((addr >> 25) & 0x3ff)) +#define OCM_WIN(addr) (((addr & 0x1ff0000) >> 1) | ((addr >> 25) & 0x3ff)) +#define MS_WIN(addr) (addr & 0x0ffc0000) +#define QLA82XX_PCI_MN_2M (0) +#define QLA82XX_PCI_MS_2M (0x80000) +#define QLA82XX_PCI_OCM0_2M (0xc0000) +#define VALID_OCM_ADDR(addr) (((addr) & 0x3f800) != 0x3f800) +#define GET_MEM_OFFS_2M(addr) (addr & MASK(18)) + +/* CRB window related */ +#define CRB_BLK(off) ((off >> 20) & 0x3f) +#define CRB_SUBBLK(off) ((off >> 16) & 0xf) +#define CRB_WINDOW_2M (0x130060) +#define CRB_HI(off) ((qla4_8xxx_crb_hub_agt[CRB_BLK(off)] << 20) | \ + ((off) & 0xf0000)) +#define QLA82XX_PCI_CAMQM_2M_END (0x04800800UL) +#define QLA82XX_PCI_CAMQM_2M_BASE (0x000ff800UL) +#define CRB_INDIRECT_2M (0x1e0000UL) + +static inline void __iomem * +qla4_8xxx_pci_base_offsetfset(struct scsi_qla_host *ha, unsigned long off) +{ + if ((off < ha->first_page_group_end) && + (off >= ha->first_page_group_start)) + return (void __iomem *)(ha->nx_pcibase + off); + + return NULL; +} + +#define MAX_CRB_XFORM 60 +static unsigned long crb_addr_xform[MAX_CRB_XFORM]; +static int qla4_8xxx_crb_table_initialized; + +#define qla4_8xxx_crb_addr_transform(name) \ + (crb_addr_xform[QLA82XX_HW_PX_MAP_CRB_##name] = \ + QLA82XX_HW_CRB_HUB_AGT_ADR_##name << 20) +static void +qla4_8xxx_crb_addr_transform_setup(void) +{ + qla4_8xxx_crb_addr_transform(XDMA); + qla4_8xxx_crb_addr_transform(TIMR); + qla4_8xxx_crb_addr_transform(SRE); + qla4_8xxx_crb_addr_transform(SQN3); + qla4_8xxx_crb_addr_transform(SQN2); + qla4_8xxx_crb_addr_transform(SQN1); + qla4_8xxx_crb_addr_transform(SQN0); + qla4_8xxx_crb_addr_transform(SQS3); + qla4_8xxx_crb_addr_transform(SQS2); + qla4_8xxx_crb_addr_transform(SQS1); + qla4_8xxx_crb_addr_transform(SQS0); + qla4_8xxx_crb_addr_transform(RPMX7); + qla4_8xxx_crb_addr_transform(RPMX6); + qla4_8xxx_crb_addr_transform(RPMX5); + qla4_8xxx_crb_addr_transform(RPMX4); + qla4_8xxx_crb_addr_transform(RPMX3); + qla4_8xxx_crb_addr_transform(RPMX2); + qla4_8xxx_crb_addr_transform(RPMX1); + qla4_8xxx_crb_addr_transform(RPMX0); + qla4_8xxx_crb_addr_transform(ROMUSB); + qla4_8xxx_crb_addr_transform(SN); + qla4_8xxx_crb_addr_transform(QMN); + qla4_8xxx_crb_addr_transform(QMS); + qla4_8xxx_crb_addr_transform(PGNI); + qla4_8xxx_crb_addr_transform(PGND); + qla4_8xxx_crb_addr_transform(PGN3); + qla4_8xxx_crb_addr_transform(PGN2); + qla4_8xxx_crb_addr_transform(PGN1); + qla4_8xxx_crb_addr_transform(PGN0); + qla4_8xxx_crb_addr_transform(PGSI); + qla4_8xxx_crb_addr_transform(PGSD); + qla4_8xxx_crb_addr_transform(PGS3); + qla4_8xxx_crb_addr_transform(PGS2); + qla4_8xxx_crb_addr_transform(PGS1); + qla4_8xxx_crb_addr_transform(PGS0); + qla4_8xxx_crb_addr_transform(PS); + qla4_8xxx_crb_addr_transform(PH); + qla4_8xxx_crb_addr_transform(NIU); + qla4_8xxx_crb_addr_transform(I2Q); + qla4_8xxx_crb_addr_transform(EG); + qla4_8xxx_crb_addr_transform(MN); + qla4_8xxx_crb_addr_transform(MS); + qla4_8xxx_crb_addr_transform(CAS2); + qla4_8xxx_crb_addr_transform(CAS1); + qla4_8xxx_crb_addr_transform(CAS0); + qla4_8xxx_crb_addr_transform(CAM); + qla4_8xxx_crb_addr_transform(C2C1); + qla4_8xxx_crb_addr_transform(C2C0); + qla4_8xxx_crb_addr_transform(SMB); + qla4_8xxx_crb_addr_transform(OCM0); + qla4_8xxx_crb_addr_transform(I2C0); + + qla4_8xxx_crb_table_initialized = 1; +} + +static struct crb_128M_2M_block_map crb_128M_2M_map[64] = { + {{{0, 0, 0, 0} } }, /* 0: PCI */ + {{{1, 0x0100000, 0x0102000, 0x120000}, /* 1: PCIE */ + {1, 0x0110000, 0x0120000, 0x130000}, + {1, 0x0120000, 0x0122000, 0x124000}, + {1, 0x0130000, 0x0132000, 0x126000}, + {1, 0x0140000, 0x0142000, 0x128000}, + {1, 0x0150000, 0x0152000, 0x12a000}, + {1, 0x0160000, 0x0170000, 0x110000}, + {1, 0x0170000, 0x0172000, 0x12e000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {1, 0x01e0000, 0x01e0800, 0x122000}, + {0, 0x0000000, 0x0000000, 0x000000} } }, + {{{1, 0x0200000, 0x0210000, 0x180000} } },/* 2: MN */ + {{{0, 0, 0, 0} } }, /* 3: */ + {{{1, 0x0400000, 0x0401000, 0x169000} } },/* 4: P2NR1 */ + {{{1, 0x0500000, 0x0510000, 0x140000} } },/* 5: SRE */ + {{{1, 0x0600000, 0x0610000, 0x1c0000} } },/* 6: NIU */ + {{{1, 0x0700000, 0x0704000, 0x1b8000} } },/* 7: QM */ + {{{1, 0x0800000, 0x0802000, 0x170000}, /* 8: SQM0 */ + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {1, 0x08f0000, 0x08f2000, 0x172000} } }, + {{{1, 0x0900000, 0x0902000, 0x174000}, /* 9: SQM1*/ + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {1, 0x09f0000, 0x09f2000, 0x176000} } }, + {{{0, 0x0a00000, 0x0a02000, 0x178000}, /* 10: SQM2*/ + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {1, 0x0af0000, 0x0af2000, 0x17a000} } }, + {{{0, 0x0b00000, 0x0b02000, 0x17c000}, /* 11: SQM3*/ + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {1, 0x0bf0000, 0x0bf2000, 0x17e000} } }, + {{{1, 0x0c00000, 0x0c04000, 0x1d4000} } },/* 12: I2Q */ + {{{1, 0x0d00000, 0x0d04000, 0x1a4000} } },/* 13: TMR */ + {{{1, 0x0e00000, 0x0e04000, 0x1a0000} } },/* 14: ROMUSB */ + {{{1, 0x0f00000, 0x0f01000, 0x164000} } },/* 15: PEG4 */ + {{{0, 0x1000000, 0x1004000, 0x1a8000} } },/* 16: XDMA */ + {{{1, 0x1100000, 0x1101000, 0x160000} } },/* 17: PEG0 */ + {{{1, 0x1200000, 0x1201000, 0x161000} } },/* 18: PEG1 */ + {{{1, 0x1300000, 0x1301000, 0x162000} } },/* 19: PEG2 */ + {{{1, 0x1400000, 0x1401000, 0x163000} } },/* 20: PEG3 */ + {{{1, 0x1500000, 0x1501000, 0x165000} } },/* 21: P2ND */ + {{{1, 0x1600000, 0x1601000, 0x166000} } },/* 22: P2NI */ + {{{0, 0, 0, 0} } }, /* 23: */ + {{{0, 0, 0, 0} } }, /* 24: */ + {{{0, 0, 0, 0} } }, /* 25: */ + {{{0, 0, 0, 0} } }, /* 26: */ + {{{0, 0, 0, 0} } }, /* 27: */ + {{{0, 0, 0, 0} } }, /* 28: */ + {{{1, 0x1d00000, 0x1d10000, 0x190000} } },/* 29: MS */ + {{{1, 0x1e00000, 0x1e01000, 0x16a000} } },/* 30: P2NR2 */ + {{{1, 0x1f00000, 0x1f10000, 0x150000} } },/* 31: EPG */ + {{{0} } }, /* 32: PCI */ + {{{1, 0x2100000, 0x2102000, 0x120000}, /* 33: PCIE */ + {1, 0x2110000, 0x2120000, 0x130000}, + {1, 0x2120000, 0x2122000, 0x124000}, + {1, 0x2130000, 0x2132000, 0x126000}, + {1, 0x2140000, 0x2142000, 0x128000}, + {1, 0x2150000, 0x2152000, 0x12a000}, + {1, 0x2160000, 0x2170000, 0x110000}, + {1, 0x2170000, 0x2172000, 0x12e000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000} } }, + {{{1, 0x2200000, 0x2204000, 0x1b0000} } },/* 34: CAM */ + {{{0} } }, /* 35: */ + {{{0} } }, /* 36: */ + {{{0} } }, /* 37: */ + {{{0} } }, /* 38: */ + {{{0} } }, /* 39: */ + {{{1, 0x2800000, 0x2804000, 0x1a4000} } },/* 40: TMR */ + {{{1, 0x2900000, 0x2901000, 0x16b000} } },/* 41: P2NR3 */ + {{{1, 0x2a00000, 0x2a00400, 0x1ac400} } },/* 42: RPMX1 */ + {{{1, 0x2b00000, 0x2b00400, 0x1ac800} } },/* 43: RPMX2 */ + {{{1, 0x2c00000, 0x2c00400, 0x1acc00} } },/* 44: RPMX3 */ + {{{1, 0x2d00000, 0x2d00400, 0x1ad000} } },/* 45: RPMX4 */ + {{{1, 0x2e00000, 0x2e00400, 0x1ad400} } },/* 46: RPMX5 */ + {{{1, 0x2f00000, 0x2f00400, 0x1ad800} } },/* 47: RPMX6 */ + {{{1, 0x3000000, 0x3000400, 0x1adc00} } },/* 48: RPMX7 */ + {{{0, 0x3100000, 0x3104000, 0x1a8000} } },/* 49: XDMA */ + {{{1, 0x3200000, 0x3204000, 0x1d4000} } },/* 50: I2Q */ + {{{1, 0x3300000, 0x3304000, 0x1a0000} } },/* 51: ROMUSB */ + {{{0} } }, /* 52: */ + {{{1, 0x3500000, 0x3500400, 0x1ac000} } },/* 53: RPMX0 */ + {{{1, 0x3600000, 0x3600400, 0x1ae000} } },/* 54: RPMX8 */ + {{{1, 0x3700000, 0x3700400, 0x1ae400} } },/* 55: RPMX9 */ + {{{1, 0x3800000, 0x3804000, 0x1d0000} } },/* 56: OCM0 */ + {{{1, 0x3900000, 0x3904000, 0x1b4000} } },/* 57: CRYPTO */ + {{{1, 0x3a00000, 0x3a04000, 0x1d8000} } },/* 58: SMB */ + {{{0} } }, /* 59: I2C0 */ + {{{0} } }, /* 60: I2C1 */ + {{{1, 0x3d00000, 0x3d04000, 0x1dc000} } },/* 61: LPC */ + {{{1, 0x3e00000, 0x3e01000, 0x167000} } },/* 62: P2NC */ + {{{1, 0x3f00000, 0x3f01000, 0x168000} } } /* 63: P2NR0 */ +}; + +/* + * top 12 bits of crb internal address (hub, agent) + */ +static unsigned qla4_8xxx_crb_hub_agt[64] = { + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_PS, + QLA82XX_HW_CRB_HUB_AGT_ADR_MN, + QLA82XX_HW_CRB_HUB_AGT_ADR_MS, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_SRE, + QLA82XX_HW_CRB_HUB_AGT_ADR_NIU, + QLA82XX_HW_CRB_HUB_AGT_ADR_QMN, + QLA82XX_HW_CRB_HUB_AGT_ADR_SQN0, + QLA82XX_HW_CRB_HUB_AGT_ADR_SQN1, + QLA82XX_HW_CRB_HUB_AGT_ADR_SQN2, + QLA82XX_HW_CRB_HUB_AGT_ADR_SQN3, + QLA82XX_HW_CRB_HUB_AGT_ADR_I2Q, + QLA82XX_HW_CRB_HUB_AGT_ADR_TIMR, + QLA82XX_HW_CRB_HUB_AGT_ADR_ROMUSB, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGN4, + QLA82XX_HW_CRB_HUB_AGT_ADR_XDMA, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGN0, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGN1, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGN2, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGN3, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGND, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGNI, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGS0, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGS1, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGS2, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGS3, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGSI, + QLA82XX_HW_CRB_HUB_AGT_ADR_SN, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_EG, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_PS, + QLA82XX_HW_CRB_HUB_AGT_ADR_CAM, + 0, + 0, + 0, + 0, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_TIMR, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX1, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX2, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX3, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX4, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX5, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX6, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX7, + QLA82XX_HW_CRB_HUB_AGT_ADR_XDMA, + QLA82XX_HW_CRB_HUB_AGT_ADR_I2Q, + QLA82XX_HW_CRB_HUB_AGT_ADR_ROMUSB, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX0, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX8, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX9, + QLA82XX_HW_CRB_HUB_AGT_ADR_OCM0, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_SMB, + QLA82XX_HW_CRB_HUB_AGT_ADR_I2C0, + QLA82XX_HW_CRB_HUB_AGT_ADR_I2C1, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGNC, + 0, +}; + +/* Device states */ +static char *qdev_state[] = { + "Unknown", + "Cold", + "Initializing", + "Ready", + "Need Reset", + "Need Quiescent", + "Failed", + "Quiescent", +}; + +/* + * In: 'off' is offset from CRB space in 128M pci map + * Out: 'off' is 2M pci map addr + * side effect: lock crb window + */ +static void +qla4_8xxx_pci_set_crbwindow_2M(struct scsi_qla_host *ha, ulong *off) +{ + u32 win_read; + + ha->crb_win = CRB_HI(*off); + writel(ha->crb_win, + (void __iomem *)(CRB_WINDOW_2M + ha->nx_pcibase)); + + /* Read back value to make sure write has gone through before trying + * to use it. */ + win_read = readl((void __iomem *)(CRB_WINDOW_2M + ha->nx_pcibase)); + if (win_read != ha->crb_win) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: Written crbwin (0x%x) != Read crbwin (0x%x)," + " off=0x%lx\n", __func__, ha->crb_win, win_read, *off)); + } + *off = (*off & MASK(16)) + CRB_INDIRECT_2M + ha->nx_pcibase; +} + +void +qla4_8xxx_wr_32(struct scsi_qla_host *ha, ulong off, u32 data) +{ + unsigned long flags = 0; + int rv; + + rv = qla4_8xxx_pci_get_crb_addr_2M(ha, &off); + + BUG_ON(rv == -1); + + if (rv == 1) { + write_lock_irqsave(&ha->hw_lock, flags); + qla4_8xxx_crb_win_lock(ha); + qla4_8xxx_pci_set_crbwindow_2M(ha, &off); + } + + writel(data, (void __iomem *)off); + + if (rv == 1) { + qla4_8xxx_crb_win_unlock(ha); + write_unlock_irqrestore(&ha->hw_lock, flags); + } +} + +int +qla4_8xxx_rd_32(struct scsi_qla_host *ha, ulong off) +{ + unsigned long flags = 0; + int rv; + u32 data; + + rv = qla4_8xxx_pci_get_crb_addr_2M(ha, &off); + + BUG_ON(rv == -1); + + if (rv == 1) { + write_lock_irqsave(&ha->hw_lock, flags); + qla4_8xxx_crb_win_lock(ha); + qla4_8xxx_pci_set_crbwindow_2M(ha, &off); + } + data = readl((void __iomem *)off); + + if (rv == 1) { + qla4_8xxx_crb_win_unlock(ha); + write_unlock_irqrestore(&ha->hw_lock, flags); + } + return data; +} + +#define CRB_WIN_LOCK_TIMEOUT 100000000 + +int qla4_8xxx_crb_win_lock(struct scsi_qla_host *ha) +{ + int i; + int done = 0, timeout = 0; + + while (!done) { + /* acquire semaphore3 from PCI HW block */ + done = qla4_8xxx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM7_LOCK)); + if (done == 1) + break; + if (timeout >= CRB_WIN_LOCK_TIMEOUT) + return -1; + + timeout++; + + /* Yield CPU */ + if (!in_interrupt()) + schedule(); + else { + for (i = 0; i < 20; i++) + cpu_relax(); /*This a nop instr on i386*/ + } + } + qla4_8xxx_wr_32(ha, QLA82XX_CRB_WIN_LOCK_ID, ha->func_num); + return 0; +} + +void qla4_8xxx_crb_win_unlock(struct scsi_qla_host *ha) +{ + qla4_8xxx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM7_UNLOCK)); +} + +#define IDC_LOCK_TIMEOUT 100000000 + +/** + * qla4_8xxx_idc_lock - hw_lock + * @ha: pointer to adapter structure + * + * General purpose lock used to synchronize access to + * CRB_DEV_STATE, CRB_DEV_REF_COUNT, etc. + **/ +int qla4_8xxx_idc_lock(struct scsi_qla_host *ha) +{ + int i; + int done = 0, timeout = 0; + + while (!done) { + /* acquire semaphore5 from PCI HW block */ + done = qla4_8xxx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM5_LOCK)); + if (done == 1) + break; + if (timeout >= IDC_LOCK_TIMEOUT) + return -1; + + timeout++; + + /* Yield CPU */ + if (!in_interrupt()) + schedule(); + else { + for (i = 0; i < 20; i++) + cpu_relax(); /*This a nop instr on i386*/ + } + } + return 0; +} + +void qla4_8xxx_idc_unlock(struct scsi_qla_host *ha) +{ + qla4_8xxx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM5_UNLOCK)); +} + +int +qla4_8xxx_pci_get_crb_addr_2M(struct scsi_qla_host *ha, ulong *off) +{ + struct crb_128M_2M_sub_block_map *m; + + if (*off >= QLA82XX_CRB_MAX) + return -1; + + if (*off >= QLA82XX_PCI_CAMQM && (*off < QLA82XX_PCI_CAMQM_2M_END)) { + *off = (*off - QLA82XX_PCI_CAMQM) + + QLA82XX_PCI_CAMQM_2M_BASE + ha->nx_pcibase; + return 0; + } + + if (*off < QLA82XX_PCI_CRBSPACE) + return -1; + + *off -= QLA82XX_PCI_CRBSPACE; + /* + * Try direct map + */ + + m = &crb_128M_2M_map[CRB_BLK(*off)].sub_block[CRB_SUBBLK(*off)]; + + if (m->valid && (m->start_128M <= *off) && (m->end_128M > *off)) { + *off = *off + m->start_2M - m->start_128M + ha->nx_pcibase; + return 0; + } + + /* + * Not in direct map, use crb window + */ + return 1; +} + +/* PCI Windowing for DDR regions. */ +#define QLA82XX_ADDR_IN_RANGE(addr, low, high) \ + (((addr) <= (high)) && ((addr) >= (low))) + +/* +* check memory access boundary. +* used by test agent. support ddr access only for now +*/ +static unsigned long +qla4_8xxx_pci_mem_bound_check(struct scsi_qla_host *ha, + unsigned long long addr, int size) +{ + if (!QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_DDR_NET, + QLA82XX_ADDR_DDR_NET_MAX) || + !QLA82XX_ADDR_IN_RANGE(addr + size - 1, + QLA82XX_ADDR_DDR_NET, QLA82XX_ADDR_DDR_NET_MAX) || + ((size != 1) && (size != 2) && (size != 4) && (size != 8))) { + return 0; + } + return 1; +} + +static int qla4_8xxx_pci_set_window_warning_count; + +static unsigned long +qla4_8xxx_pci_set_window(struct scsi_qla_host *ha, unsigned long long addr) +{ + int window; + u32 win_read; + + if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_DDR_NET, + QLA82XX_ADDR_DDR_NET_MAX)) { + /* DDR network side */ + window = MN_WIN(addr); + ha->ddr_mn_window = window; + qla4_8xxx_wr_32(ha, ha->mn_win_crb | + QLA82XX_PCI_CRBSPACE, window); + win_read = qla4_8xxx_rd_32(ha, ha->mn_win_crb | + QLA82XX_PCI_CRBSPACE); + if ((win_read << 17) != window) { + ql4_printk(KERN_WARNING, ha, + "%s: Written MNwin (0x%x) != Read MNwin (0x%x)\n", + __func__, window, win_read); + } + addr = GET_MEM_OFFS_2M(addr) + QLA82XX_PCI_DDR_NET; + } else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_OCM0, + QLA82XX_ADDR_OCM0_MAX)) { + unsigned int temp1; + /* if bits 19:18&17:11 are on */ + if ((addr & 0x00ff800) == 0xff800) { + printk("%s: QM access not handled.\n", __func__); + addr = -1UL; + } + + window = OCM_WIN(addr); + ha->ddr_mn_window = window; + qla4_8xxx_wr_32(ha, ha->mn_win_crb | + QLA82XX_PCI_CRBSPACE, window); + win_read = qla4_8xxx_rd_32(ha, ha->mn_win_crb | + QLA82XX_PCI_CRBSPACE); + temp1 = ((window & 0x1FF) << 7) | + ((window & 0x0FFFE0000) >> 17); + if (win_read != temp1) { + printk("%s: Written OCMwin (0x%x) != Read" + " OCMwin (0x%x)\n", __func__, temp1, win_read); + } + addr = GET_MEM_OFFS_2M(addr) + QLA82XX_PCI_OCM0_2M; + + } else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_QDR_NET, + QLA82XX_P3_ADDR_QDR_NET_MAX)) { + /* QDR network side */ + window = MS_WIN(addr); + ha->qdr_sn_window = window; + qla4_8xxx_wr_32(ha, ha->ms_win_crb | + QLA82XX_PCI_CRBSPACE, window); + win_read = qla4_8xxx_rd_32(ha, + ha->ms_win_crb | QLA82XX_PCI_CRBSPACE); + if (win_read != window) { + printk("%s: Written MSwin (0x%x) != Read " + "MSwin (0x%x)\n", __func__, window, win_read); + } + addr = GET_MEM_OFFS_2M(addr) + QLA82XX_PCI_QDR_NET; + + } else { + /* + * peg gdb frequently accesses memory that doesn't exist, + * this limits the chit chat so debugging isn't slowed down. + */ + if ((qla4_8xxx_pci_set_window_warning_count++ < 8) || + (qla4_8xxx_pci_set_window_warning_count%64 == 0)) { + printk("%s: Warning:%s Unknown address range!\n", + __func__, DRIVER_NAME); + } + addr = -1UL; + } + return addr; +} + +/* check if address is in the same windows as the previous access */ +static int qla4_8xxx_pci_is_same_window(struct scsi_qla_host *ha, + unsigned long long addr) +{ + int window; + unsigned long long qdr_max; + + qdr_max = QLA82XX_P3_ADDR_QDR_NET_MAX; + + if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_DDR_NET, + QLA82XX_ADDR_DDR_NET_MAX)) { + /* DDR network side */ + BUG(); /* MN access can not come here */ + } else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_OCM0, + QLA82XX_ADDR_OCM0_MAX)) { + return 1; + } else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_OCM1, + QLA82XX_ADDR_OCM1_MAX)) { + return 1; + } else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_QDR_NET, + qdr_max)) { + /* QDR network side */ + window = ((addr - QLA82XX_ADDR_QDR_NET) >> 22) & 0x3f; + if (ha->qdr_sn_window == window) + return 1; + } + + return 0; +} + +static int qla4_8xxx_pci_mem_read_direct(struct scsi_qla_host *ha, + u64 off, void *data, int size) +{ + unsigned long flags; + void __iomem *addr; + int ret = 0; + u64 start; + void __iomem *mem_ptr = NULL; + unsigned long mem_base; + unsigned long mem_page; + + write_lock_irqsave(&ha->hw_lock, flags); + + /* + * If attempting to access unknown address or straddle hw windows, + * do not access. + */ + start = qla4_8xxx_pci_set_window(ha, off); + if ((start == -1UL) || + (qla4_8xxx_pci_is_same_window(ha, off + size - 1) == 0)) { + write_unlock_irqrestore(&ha->hw_lock, flags); + printk(KERN_ERR"%s out of bound pci memory access. " + "offset is 0x%llx\n", DRIVER_NAME, off); + return -1; + } + + addr = qla4_8xxx_pci_base_offsetfset(ha, start); + if (!addr) { + write_unlock_irqrestore(&ha->hw_lock, flags); + mem_base = pci_resource_start(ha->pdev, 0); + mem_page = start & PAGE_MASK; + /* Map two pages whenever user tries to access addresses in two + consecutive pages. + */ + if (mem_page != ((start + size - 1) & PAGE_MASK)) + mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE * 2); + else + mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE); + + if (mem_ptr == NULL) { + *(u8 *)data = 0; + return -1; + } + addr = mem_ptr; + addr += start & (PAGE_SIZE - 1); + write_lock_irqsave(&ha->hw_lock, flags); + } + + switch (size) { + case 1: + *(u8 *)data = readb(addr); + break; + case 2: + *(u16 *)data = readw(addr); + break; + case 4: + *(u32 *)data = readl(addr); + break; + case 8: + *(u64 *)data = readq(addr); + break; + default: + ret = -1; + break; + } + write_unlock_irqrestore(&ha->hw_lock, flags); + + if (mem_ptr) + iounmap(mem_ptr); + return ret; +} + +static int +qla4_8xxx_pci_mem_write_direct(struct scsi_qla_host *ha, u64 off, + void *data, int size) +{ + unsigned long flags; + void __iomem *addr; + int ret = 0; + u64 start; + void __iomem *mem_ptr = NULL; + unsigned long mem_base; + unsigned long mem_page; + + write_lock_irqsave(&ha->hw_lock, flags); + + /* + * If attempting to access unknown address or straddle hw windows, + * do not access. + */ + start = qla4_8xxx_pci_set_window(ha, off); + if ((start == -1UL) || + (qla4_8xxx_pci_is_same_window(ha, off + size - 1) == 0)) { + write_unlock_irqrestore(&ha->hw_lock, flags); + printk(KERN_ERR"%s out of bound pci memory access. " + "offset is 0x%llx\n", DRIVER_NAME, off); + return -1; + } + + addr = qla4_8xxx_pci_base_offsetfset(ha, start); + if (!addr) { + write_unlock_irqrestore(&ha->hw_lock, flags); + mem_base = pci_resource_start(ha->pdev, 0); + mem_page = start & PAGE_MASK; + /* Map two pages whenever user tries to access addresses in two + consecutive pages. + */ + if (mem_page != ((start + size - 1) & PAGE_MASK)) + mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE*2); + else + mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE); + if (mem_ptr == NULL) + return -1; + + addr = mem_ptr; + addr += start & (PAGE_SIZE - 1); + write_lock_irqsave(&ha->hw_lock, flags); + } + + switch (size) { + case 1: + writeb(*(u8 *)data, addr); + break; + case 2: + writew(*(u16 *)data, addr); + break; + case 4: + writel(*(u32 *)data, addr); + break; + case 8: + writeq(*(u64 *)data, addr); + break; + default: + ret = -1; + break; + } + write_unlock_irqrestore(&ha->hw_lock, flags); + if (mem_ptr) + iounmap(mem_ptr); + return ret; +} + +#define MTU_FUDGE_FACTOR 100 + +static unsigned long +qla4_8xxx_decode_crb_addr(unsigned long addr) +{ + int i; + unsigned long base_addr, offset, pci_base; + + if (!qla4_8xxx_crb_table_initialized) + qla4_8xxx_crb_addr_transform_setup(); + + pci_base = ADDR_ERROR; + base_addr = addr & 0xfff00000; + offset = addr & 0x000fffff; + + for (i = 0; i < MAX_CRB_XFORM; i++) { + if (crb_addr_xform[i] == base_addr) { + pci_base = i << 20; + break; + } + } + if (pci_base == ADDR_ERROR) + return pci_base; + else + return pci_base + offset; +} + +static long rom_max_timeout = 100; +static long qla4_8xxx_rom_lock_timeout = 100; + +static int +qla4_8xxx_rom_lock(struct scsi_qla_host *ha) +{ + int i; + int done = 0, timeout = 0; + + while (!done) { + /* acquire semaphore2 from PCI HW block */ + + done = qla4_8xxx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_LOCK)); + if (done == 1) + break; + if (timeout >= qla4_8xxx_rom_lock_timeout) + return -1; + + timeout++; + + /* Yield CPU */ + if (!in_interrupt()) + schedule(); + else { + for (i = 0; i < 20; i++) + cpu_relax(); /*This a nop instr on i386*/ + } + } + qla4_8xxx_wr_32(ha, QLA82XX_ROM_LOCK_ID, ROM_LOCK_DRIVER); + return 0; +} + +static void +qla4_8xxx_rom_unlock(struct scsi_qla_host *ha) +{ + qla4_8xxx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK)); +} + +static int +qla4_8xxx_wait_rom_done(struct scsi_qla_host *ha) +{ + long timeout = 0; + long done = 0 ; + + while (done == 0) { + done = qla4_8xxx_rd_32(ha, QLA82XX_ROMUSB_GLB_STATUS); + done &= 2; + timeout++; + if (timeout >= rom_max_timeout) { + printk("%s: Timeout reached waiting for rom done", + DRIVER_NAME); + return -1; + } + } + return 0; +} + +static int +qla4_8xxx_do_rom_fast_read(struct scsi_qla_host *ha, int addr, int *valp) +{ + qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_ROM_ADDRESS, addr); + qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); + qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 3); + qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, 0xb); + if (qla4_8xxx_wait_rom_done(ha)) { + printk("%s: Error waiting for rom done\n", DRIVER_NAME); + return -1; + } + /* reset abyte_cnt and dummy_byte_cnt */ + qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); + udelay(10); + qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 0); + + *valp = qla4_8xxx_rd_32(ha, QLA82XX_ROMUSB_ROM_RDATA); + return 0; +} + +static int +qla4_8xxx_rom_fast_read(struct scsi_qla_host *ha, int addr, int *valp) +{ + int ret, loops = 0; + + while ((qla4_8xxx_rom_lock(ha) != 0) && (loops < 50000)) { + udelay(100); + loops++; + } + if (loops >= 50000) { + printk("%s: qla4_8xxx_rom_lock failed\n", DRIVER_NAME); + return -1; + } + ret = qla4_8xxx_do_rom_fast_read(ha, addr, valp); + qla4_8xxx_rom_unlock(ha); + return ret; +} + +/** + * This routine does CRB initialize sequence + * to put the ISP into operational state + **/ +static int +qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose) +{ + int addr, val; + int i ; + struct crb_addr_pair *buf; + unsigned long off; + unsigned offset, n; + + struct crb_addr_pair { + long addr; + long data; + }; + + /* Halt all the indiviual PEGs and other blocks of the ISP */ + qla4_8xxx_rom_lock(ha); + if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) + /* don't reset CAM block on reset */ + qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff); + else + qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xffffffff); + + qla4_8xxx_rom_unlock(ha); + + /* Read the signature value from the flash. + * Offset 0: Contain signature (0xcafecafe) + * Offset 4: Offset and number of addr/value pairs + * that present in CRB initialize sequence + */ + if (qla4_8xxx_rom_fast_read(ha, 0, &n) != 0 || n != 0xcafecafeUL || + qla4_8xxx_rom_fast_read(ha, 4, &n) != 0) { + ql4_printk(KERN_WARNING, ha, + "[ERROR] Reading crb_init area: n: %08x\n", n); + return -1; + } + + /* Offset in flash = lower 16 bits + * Number of enteries = upper 16 bits + */ + offset = n & 0xffffU; + n = (n >> 16) & 0xffffU; + + /* number of addr/value pair should not exceed 1024 enteries */ + if (n >= 1024) { + ql4_printk(KERN_WARNING, ha, + "%s: %s:n=0x%x [ERROR] Card flash not initialized.\n", + DRIVER_NAME, __func__, n); + return -1; + } + + ql4_printk(KERN_INFO, ha, + "%s: %d CRB init values found in ROM.\n", DRIVER_NAME, n); + + buf = kmalloc(n * sizeof(struct crb_addr_pair), GFP_KERNEL); + if (buf == NULL) { + ql4_printk(KERN_WARNING, ha, + "%s: [ERROR] Unable to malloc memory.\n", DRIVER_NAME); + return -1; + } + + for (i = 0; i < n; i++) { + if (qla4_8xxx_rom_fast_read(ha, 8*i + 4*offset, &val) != 0 || + qla4_8xxx_rom_fast_read(ha, 8*i + 4*offset + 4, &addr) != + 0) { + kfree(buf); + return -1; + } + + buf[i].addr = addr; + buf[i].data = val; + } + + for (i = 0; i < n; i++) { + /* Translate internal CRB initialization + * address to PCI bus address + */ + off = qla4_8xxx_decode_crb_addr((unsigned long)buf[i].addr) + + QLA82XX_PCI_CRBSPACE; + /* Not all CRB addr/value pair to be written, + * some of them are skipped + */ + + /* skip if LS bit is set*/ + if (off & 0x1) { + DEBUG2(ql4_printk(KERN_WARNING, ha, + "Skip CRB init replay for offset = 0x%lx\n", off)); + continue; + } + + /* skipping cold reboot MAGIC */ + if (off == QLA82XX_CAM_RAM(0x1fc)) + continue; + + /* do not reset PCI */ + if (off == (ROMUSB_GLB + 0xbc)) + continue; + + /* skip core clock, so that firmware can increase the clock */ + if (off == (ROMUSB_GLB + 0xc8)) + continue; + + /* skip the function enable register */ + if (off == QLA82XX_PCIE_REG(PCIE_SETUP_FUNCTION)) + continue; + + if (off == QLA82XX_PCIE_REG(PCIE_SETUP_FUNCTION2)) + continue; + + if ((off & 0x0ff00000) == QLA82XX_CRB_SMB) + continue; + + if ((off & 0x0ff00000) == QLA82XX_CRB_DDR_NET) + continue; + + if (off == ADDR_ERROR) { + ql4_printk(KERN_WARNING, ha, + "%s: [ERROR] Unknown addr: 0x%08lx\n", + DRIVER_NAME, buf[i].addr); + continue; + } + + qla4_8xxx_wr_32(ha, off, buf[i].data); + + /* ISP requires much bigger delay to settle down, + * else crb_window returns 0xffffffff + */ + if (off == QLA82XX_ROMUSB_GLB_SW_RESET) + msleep(1000); + + /* ISP requires millisec delay between + * successive CRB register updation + */ + msleep(1); + } + + kfree(buf); + + /* Resetting the data and instruction cache */ + qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_D+0xec, 0x1e); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_D+0x4c, 8); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_I+0x4c, 8); + + /* Clear all protocol processing engines */ + qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_0+0x8, 0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_0+0xc, 0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_1+0x8, 0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_1+0xc, 0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_2+0x8, 0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_2+0xc, 0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_3+0x8, 0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_3+0xc, 0); + + return 0; +} + +static int qla4_8xxx_check_for_bad_spd(struct scsi_qla_host *ha) +{ + u32 val = 0; + val = qla4_8xxx_rd_32(ha, BOOT_LOADER_DIMM_STATUS) ; + val &= QLA82XX_BOOT_LOADER_MN_ISSUE; + if (val & QLA82XX_PEG_TUNE_MN_SPD_ZEROED) { + printk("Memory DIMM SPD not programmed. Assumed valid.\n"); + return 1; + } else if (val) { + printk("Memory DIMM type incorrect. Info:%08X.\n", val); + return 2; + } + return 0; +} + +static int +qla4_8xxx_load_from_flash(struct scsi_qla_host *ha, uint32_t image_start) +{ + int i; + long size = 0; + long flashaddr, memaddr; + u64 data; + u32 high, low; + + flashaddr = memaddr = ha->hw.flt_region_bootload; + size = (image_start - flashaddr)/8; + + DEBUG2(printk("scsi%ld: %s: bootldr=0x%lx, fw_image=0x%x\n", + ha->host_no, __func__, flashaddr, image_start)); + + for (i = 0; i < size; i++) { + if ((qla4_8xxx_rom_fast_read(ha, flashaddr, (int *)&low)) || + (qla4_8xxx_rom_fast_read(ha, flashaddr + 4, + (int *)&high))) { + return -1; + } + data = ((u64)high << 32) | low ; + qla4_8xxx_pci_mem_write_2M(ha, memaddr, &data, 8); + flashaddr += 8; + memaddr += 8; + + if (i%0x1000 == 0) + msleep(1); + + } + + udelay(100); + + read_lock(&ha->hw_lock); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x18, 0x1020); + qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0x80001e); + read_unlock(&ha->hw_lock); + + return 0; +} + +static int qla4_8xxx_load_fw(struct scsi_qla_host *ha, uint32_t image_start) +{ + u32 rst; + + qla4_8xxx_wr_32(ha, CRB_CMDPEG_STATE, 0); + if (qla4_8xxx_pinit_from_rom(ha, 0) != QLA_SUCCESS) { + printk(KERN_WARNING "%s: Error during CRB Initialization\n", + __func__); + return QLA_ERROR; + } + + udelay(500); + + /* at this point, QM is in reset. This could be a problem if there are + * incoming d* transition queue messages. QM/PCIE could wedge. + * To get around this, QM is brought out of reset. + */ + + rst = qla4_8xxx_rd_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET); + /* unreset qm */ + rst &= ~(1 << 28); + qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, rst); + + if (qla4_8xxx_load_from_flash(ha, image_start)) { + printk("%s: Error trying to load fw from flash!\n", __func__); + return QLA_ERROR; + } + + return QLA_SUCCESS; +} + +int +qla4_8xxx_pci_mem_read_2M(struct scsi_qla_host *ha, + u64 off, void *data, int size) +{ + int i, j = 0, k, start, end, loop, sz[2], off0[2]; + int shift_amount; + uint32_t temp; + uint64_t off8, val, mem_crb, word[2] = {0, 0}; + + /* + * If not MN, go check for MS or invalid. + */ + + if (off >= QLA82XX_ADDR_QDR_NET && off <= QLA82XX_P3_ADDR_QDR_NET_MAX) + mem_crb = QLA82XX_CRB_QDR_NET; + else { + mem_crb = QLA82XX_CRB_DDR_NET; + if (qla4_8xxx_pci_mem_bound_check(ha, off, size) == 0) + return qla4_8xxx_pci_mem_read_direct(ha, + off, data, size); + } + + + off8 = off & 0xfffffff0; + off0[0] = off & 0xf; + sz[0] = (size < (16 - off0[0])) ? size : (16 - off0[0]); + shift_amount = 4; + + loop = ((off0[0] + size - 1) >> shift_amount) + 1; + off0[1] = 0; + sz[1] = size - sz[0]; + + for (i = 0; i < loop; i++) { + temp = off8 + (i << shift_amount); + qla4_8xxx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_LO, temp); + temp = 0; + qla4_8xxx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_HI, temp); + temp = MIU_TA_CTL_ENABLE; + qla4_8xxx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); + temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE; + qla4_8xxx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); + + for (j = 0; j < MAX_CTL_CHECK; j++) { + temp = qla4_8xxx_rd_32(ha, mem_crb + MIU_TEST_AGT_CTRL); + if ((temp & MIU_TA_CTL_BUSY) == 0) + break; + } + + if (j >= MAX_CTL_CHECK) { + if (printk_ratelimit()) + ql4_printk(KERN_ERR, ha, + "failed to read through agent\n"); + break; + } + + start = off0[i] >> 2; + end = (off0[i] + sz[i] - 1) >> 2; + for (k = start; k <= end; k++) { + temp = qla4_8xxx_rd_32(ha, + mem_crb + MIU_TEST_AGT_RDDATA(k)); + word[i] |= ((uint64_t)temp << (32 * (k & 1))); + } + } + + if (j >= MAX_CTL_CHECK) + return -1; + + if ((off0[0] & 7) == 0) { + val = word[0]; + } else { + val = ((word[0] >> (off0[0] * 8)) & (~(~0ULL << (sz[0] * 8)))) | + ((word[1] & (~(~0ULL << (sz[1] * 8)))) << (sz[0] * 8)); + } + + switch (size) { + case 1: + *(uint8_t *)data = val; + break; + case 2: + *(uint16_t *)data = val; + break; + case 4: + *(uint32_t *)data = val; + break; + case 8: + *(uint64_t *)data = val; + break; + } + return 0; +} + +int +qla4_8xxx_pci_mem_write_2M(struct scsi_qla_host *ha, + u64 off, void *data, int size) +{ + int i, j, ret = 0, loop, sz[2], off0; + int scale, shift_amount, startword; + uint32_t temp; + uint64_t off8, mem_crb, tmpw, word[2] = {0, 0}; + + /* + * If not MN, go check for MS or invalid. + */ + if (off >= QLA82XX_ADDR_QDR_NET && off <= QLA82XX_P3_ADDR_QDR_NET_MAX) + mem_crb = QLA82XX_CRB_QDR_NET; + else { + mem_crb = QLA82XX_CRB_DDR_NET; + if (qla4_8xxx_pci_mem_bound_check(ha, off, size) == 0) + return qla4_8xxx_pci_mem_write_direct(ha, + off, data, size); + } + + off0 = off & 0x7; + sz[0] = (size < (8 - off0)) ? size : (8 - off0); + sz[1] = size - sz[0]; + + off8 = off & 0xfffffff0; + loop = (((off & 0xf) + size - 1) >> 4) + 1; + shift_amount = 4; + scale = 2; + startword = (off & 0xf)/8; + + for (i = 0; i < loop; i++) { + if (qla4_8xxx_pci_mem_read_2M(ha, off8 + + (i << shift_amount), &word[i * scale], 8)) + return -1; + } + + switch (size) { + case 1: + tmpw = *((uint8_t *)data); + break; + case 2: + tmpw = *((uint16_t *)data); + break; + case 4: + tmpw = *((uint32_t *)data); + break; + case 8: + default: + tmpw = *((uint64_t *)data); + break; + } + + if (sz[0] == 8) + word[startword] = tmpw; + else { + word[startword] &= + ~((~(~0ULL << (sz[0] * 8))) << (off0 * 8)); + word[startword] |= tmpw << (off0 * 8); + } + + if (sz[1] != 0) { + word[startword+1] &= ~(~0ULL << (sz[1] * 8)); + word[startword+1] |= tmpw >> (sz[0] * 8); + } + + for (i = 0; i < loop; i++) { + temp = off8 + (i << shift_amount); + qla4_8xxx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_LO, temp); + temp = 0; + qla4_8xxx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_HI, temp); + temp = word[i * scale] & 0xffffffff; + qla4_8xxx_wr_32(ha, mem_crb+MIU_TEST_AGT_WRDATA_LO, temp); + temp = (word[i * scale] >> 32) & 0xffffffff; + qla4_8xxx_wr_32(ha, mem_crb+MIU_TEST_AGT_WRDATA_HI, temp); + temp = word[i*scale + 1] & 0xffffffff; + qla4_8xxx_wr_32(ha, mem_crb + MIU_TEST_AGT_WRDATA_UPPER_LO, + temp); + temp = (word[i*scale + 1] >> 32) & 0xffffffff; + qla4_8xxx_wr_32(ha, mem_crb + MIU_TEST_AGT_WRDATA_UPPER_HI, + temp); + + temp = MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE; + qla4_8xxx_wr_32(ha, mem_crb+MIU_TEST_AGT_CTRL, temp); + temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE; + qla4_8xxx_wr_32(ha, mem_crb+MIU_TEST_AGT_CTRL, temp); + + for (j = 0; j < MAX_CTL_CHECK; j++) { + temp = qla4_8xxx_rd_32(ha, mem_crb + MIU_TEST_AGT_CTRL); + if ((temp & MIU_TA_CTL_BUSY) == 0) + break; + } + + if (j >= MAX_CTL_CHECK) { + if (printk_ratelimit()) + ql4_printk(KERN_ERR, ha, + "failed to write through agent\n"); + ret = -1; + break; + } + } + + return ret; +} + +static int qla4_8xxx_cmdpeg_ready(struct scsi_qla_host *ha, int pegtune_val) +{ + u32 val = 0; + int retries = 60; + + if (!pegtune_val) { + do { + val = qla4_8xxx_rd_32(ha, CRB_CMDPEG_STATE); + if ((val == PHAN_INITIALIZE_COMPLETE) || + (val == PHAN_INITIALIZE_ACK)) + return 0; + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(500); + + } while (--retries); + + qla4_8xxx_check_for_bad_spd(ha); + + if (!retries) { + pegtune_val = qla4_8xxx_rd_32(ha, + QLA82XX_ROMUSB_GLB_PEGTUNE_DONE); + printk(KERN_WARNING "%s: init failed, " + "pegtune_val = %x\n", __func__, pegtune_val); + return -1; + } + } + return 0; +} + +static int qla4_8xxx_rcvpeg_ready(struct scsi_qla_host *ha) +{ + uint32_t state = 0; + int loops = 0; + + /* Window 1 call */ + read_lock(&ha->hw_lock); + state = qla4_8xxx_rd_32(ha, CRB_RCVPEG_STATE); + read_unlock(&ha->hw_lock); + + while ((state != PHAN_PEG_RCV_INITIALIZED) && (loops < 30000)) { + udelay(100); + /* Window 1 call */ + read_lock(&ha->hw_lock); + state = qla4_8xxx_rd_32(ha, CRB_RCVPEG_STATE); + read_unlock(&ha->hw_lock); + + loops++; + } + + if (loops >= 30000) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "Receive Peg initialization not complete: 0x%x.\n", state)); + return QLA_ERROR; + } + + return QLA_SUCCESS; +} + +static inline void +qla4_8xxx_set_drv_active(struct scsi_qla_host *ha) +{ + uint32_t drv_active; + + drv_active = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); + drv_active |= (1 << (ha->func_num * 4)); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_ACTIVE, drv_active); +} + +void +qla4_8xxx_clear_drv_active(struct scsi_qla_host *ha) +{ + uint32_t drv_active; + + drv_active = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); + drv_active &= ~(1 << (ha->func_num * 4)); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_ACTIVE, drv_active); +} + +static inline int +qla4_8xxx_need_reset(struct scsi_qla_host *ha) +{ + uint32_t drv_state; + int rval; + + drv_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE); + rval = drv_state & (1 << (ha->func_num * 4)); + return rval; +} + +static inline void +qla4_8xxx_set_rst_ready(struct scsi_qla_host *ha) +{ + uint32_t drv_state; + + drv_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE); + drv_state |= (1 << (ha->func_num * 4)); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, drv_state); +} + +static inline void +qla4_8xxx_clear_rst_ready(struct scsi_qla_host *ha) +{ + uint32_t drv_state; + + drv_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE); + drv_state &= ~(1 << (ha->func_num * 4)); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, drv_state); +} + +static inline void +qla4_8xxx_set_qsnt_ready(struct scsi_qla_host *ha) +{ + uint32_t qsnt_state; + + qsnt_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE); + qsnt_state |= (2 << (ha->func_num * 4)); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, qsnt_state); +} + + +static int +qla4_8xxx_start_firmware(struct scsi_qla_host *ha, uint32_t image_start) +{ + int pcie_cap; + uint16_t lnk; + + /* scrub dma mask expansion register */ + qla4_8xxx_wr_32(ha, CRB_DMA_SHIFT, 0x55555555); + + /* Overwrite stale initialization register values */ + qla4_8xxx_wr_32(ha, CRB_CMDPEG_STATE, 0); + qla4_8xxx_wr_32(ha, CRB_RCVPEG_STATE, 0); + qla4_8xxx_wr_32(ha, QLA82XX_PEG_HALT_STATUS1, 0); + qla4_8xxx_wr_32(ha, QLA82XX_PEG_HALT_STATUS2, 0); + + if (qla4_8xxx_load_fw(ha, image_start) != QLA_SUCCESS) { + printk("%s: Error trying to start fw!\n", __func__); + return QLA_ERROR; + } + + /* Handshake with the card before we register the devices. */ + if (qla4_8xxx_cmdpeg_ready(ha, 0) != QLA_SUCCESS) { + printk("%s: Error during card handshake!\n", __func__); + return QLA_ERROR; + } + + /* Negotiated Link width */ + pcie_cap = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP); + pci_read_config_word(ha->pdev, pcie_cap + PCI_EXP_LNKSTA, &lnk); + ha->link_width = (lnk >> 4) & 0x3f; + + /* Synchronize with Receive peg */ + return qla4_8xxx_rcvpeg_ready(ha); +} + +static int +qla4_8xxx_try_start_fw(struct scsi_qla_host *ha) +{ + int rval = QLA_ERROR; + + /* + * FW Load priority: + * 1) Operational firmware residing in flash. + * 2) Fail + */ + + ql4_printk(KERN_INFO, ha, + "FW: Retrieving flash offsets from FLT/FDT ...\n"); + rval = qla4_8xxx_get_flash_info(ha); + if (rval != QLA_SUCCESS) + return rval; + + ql4_printk(KERN_INFO, ha, + "FW: Attempting to load firmware from flash...\n"); + rval = qla4_8xxx_start_firmware(ha, ha->hw.flt_region_fw); + if (rval == QLA_SUCCESS) + return rval; + + ql4_printk(KERN_ERR, ha, "FW: Load firmware from flash FAILED...\n"); + + return rval; +} + +/** + * qla4_8xxx_device_bootstrap - Initialize device, set DEV_READY, start fw + * @ha: pointer to adapter structure + * + * Note: IDC lock must be held upon entry + **/ +static int +qla4_8xxx_device_bootstrap(struct scsi_qla_host *ha) +{ + int rval, i, timeout; + uint32_t old_count, count; + + if (qla4_8xxx_need_reset(ha)) + goto dev_initialize; + + old_count = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER); + + for (i = 0; i < 10; i++) { + timeout = msleep_interruptible(200); + if (timeout) { + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, + QLA82XX_DEV_FAILED); + return QLA_ERROR; + } + + count = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER); + if (count != old_count) + goto dev_ready; + } + +dev_initialize: + /* set to DEV_INITIALIZING */ + ql4_printk(KERN_INFO, ha, "HW State: INITIALIZING\n"); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_INITIALIZING); + + /* Driver that sets device state to initializating sets IDC version */ + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_IDC_VERSION, QLA82XX_IDC_VERSION); + + qla4_8xxx_idc_unlock(ha); + rval = qla4_8xxx_try_start_fw(ha); + qla4_8xxx_idc_lock(ha); + + if (rval != QLA_SUCCESS) { + ql4_printk(KERN_INFO, ha, "HW State: FAILED\n"); + qla4_8xxx_clear_drv_active(ha); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_FAILED); + return rval; + } + +dev_ready: + ql4_printk(KERN_INFO, ha, "HW State: READY\n"); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_READY); + + return QLA_SUCCESS; +} + +/** + * qla4_8xxx_need_reset_handler - Code to start reset sequence + * @ha: pointer to adapter structure + * + * Note: IDC lock must be held upon entry + **/ +static void +qla4_8xxx_need_reset_handler(struct scsi_qla_host *ha) +{ + uint32_t dev_state, drv_state, drv_active; + unsigned long reset_timeout; + + ql4_printk(KERN_INFO, ha, + "Performing ISP error recovery\n"); + + if (test_and_clear_bit(AF_ONLINE, &ha->flags)) { + qla4_8xxx_idc_unlock(ha); + ha->isp_ops->disable_intrs(ha); + qla4_8xxx_idc_lock(ha); + } + + qla4_8xxx_set_rst_ready(ha); + + /* wait for 10 seconds for reset ack from all functions */ + reset_timeout = jiffies + (ha->nx_reset_timeout * HZ); + + drv_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE); + drv_active = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); + + ql4_printk(KERN_INFO, ha, + "%s(%ld): drv_state = 0x%x, drv_active = 0x%x\n", + __func__, ha->host_no, drv_state, drv_active); + + while (drv_state != drv_active) { + if (time_after_eq(jiffies, reset_timeout)) { + printk("%s: RESET TIMEOUT!\n", DRIVER_NAME); + break; + } + + qla4_8xxx_idc_unlock(ha); + msleep(1000); + qla4_8xxx_idc_lock(ha); + + drv_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE); + drv_active = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); + } + + dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); + ql4_printk(KERN_INFO, ha, "3:Device state is 0x%x = %s\n", dev_state, + dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown"); + + /* Force to DEV_COLD unless someone else is starting a reset */ + if (dev_state != QLA82XX_DEV_INITIALIZING) { + ql4_printk(KERN_INFO, ha, "HW State: COLD/RE-INIT\n"); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_COLD); + } +} + +/** + * qla4_8xxx_need_qsnt_handler - Code to start qsnt + * @ha: pointer to adapter structure + **/ +void +qla4_8xxx_need_qsnt_handler(struct scsi_qla_host *ha) +{ + qla4_8xxx_idc_lock(ha); + qla4_8xxx_set_qsnt_ready(ha); + qla4_8xxx_idc_unlock(ha); +} + +/** + * qla4_8xxx_device_state_handler - Adapter state machine + * @ha: pointer to host adapter structure. + * + * Note: IDC lock must be UNLOCKED upon entry + **/ +int qla4_8xxx_device_state_handler(struct scsi_qla_host *ha) +{ + uint32_t dev_state; + int rval = QLA_SUCCESS; + unsigned long dev_init_timeout; + + if (!test_bit(AF_INIT_DONE, &ha->flags)) + qla4_8xxx_set_drv_active(ha); + + dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); + ql4_printk(KERN_INFO, ha, "1:Device state is 0x%x = %s\n", dev_state, + dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown"); + + /* wait for 30 seconds for device to go ready */ + dev_init_timeout = jiffies + (ha->nx_dev_init_timeout * HZ); + + while (1) { + qla4_8xxx_idc_lock(ha); + + if (time_after_eq(jiffies, dev_init_timeout)) { + ql4_printk(KERN_WARNING, ha, "Device init failed!\n"); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, + QLA82XX_DEV_FAILED); + } + + dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); + ql4_printk(KERN_INFO, ha, + "2:Device state is 0x%x = %s\n", dev_state, + dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown"); + + /* NOTE: Make sure idc unlocked upon exit of switch statement */ + switch (dev_state) { + case QLA82XX_DEV_READY: + qla4_8xxx_idc_unlock(ha); + goto exit; + case QLA82XX_DEV_COLD: + rval = qla4_8xxx_device_bootstrap(ha); + qla4_8xxx_idc_unlock(ha); + goto exit; + case QLA82XX_DEV_INITIALIZING: + qla4_8xxx_idc_unlock(ha); + msleep(1000); + break; + case QLA82XX_DEV_NEED_RESET: + if (!ql4xdontresethba) { + qla4_8xxx_need_reset_handler(ha); + /* Update timeout value after need + * reset handler */ + dev_init_timeout = jiffies + + (ha->nx_dev_init_timeout * HZ); + } + qla4_8xxx_idc_unlock(ha); + break; + case QLA82XX_DEV_NEED_QUIESCENT: + qla4_8xxx_idc_unlock(ha); + /* idc locked/unlocked in handler */ + qla4_8xxx_need_qsnt_handler(ha); + qla4_8xxx_idc_lock(ha); + /* fall thru needs idc_locked */ + case QLA82XX_DEV_QUIESCENT: + qla4_8xxx_idc_unlock(ha); + msleep(1000); + break; + case QLA82XX_DEV_FAILED: + qla4_8xxx_idc_unlock(ha); + qla4xxx_dead_adapter_cleanup(ha); + rval = QLA_ERROR; + goto exit; + default: + qla4_8xxx_idc_unlock(ha); + qla4xxx_dead_adapter_cleanup(ha); + rval = QLA_ERROR; + goto exit; + } + } +exit: + return rval; +} + +int qla4_8xxx_load_risc(struct scsi_qla_host *ha) +{ + int retval; + retval = qla4_8xxx_device_state_handler(ha); + + if (retval == QLA_SUCCESS && + !test_bit(AF_INIT_DONE, &ha->flags)) { + retval = qla4xxx_request_irqs(ha); + if (retval != QLA_SUCCESS) { + ql4_printk(KERN_WARNING, ha, + "Failed to reserve interrupt %d already in use.\n", + ha->pdev->irq); + } else { + set_bit(AF_IRQ_ATTACHED, &ha->flags); + ha->host->irq = ha->pdev->irq; + ql4_printk(KERN_INFO, ha, "%s: irq %d attached\n", + __func__, ha->pdev->irq); + } + } + return retval; +} + +/*****************************************************************************/ +/* Flash Manipulation Routines */ +/*****************************************************************************/ + +#define OPTROM_BURST_SIZE 0x1000 +#define OPTROM_BURST_DWORDS (OPTROM_BURST_SIZE / 4) + +#define FARX_DATA_FLAG BIT_31 +#define FARX_ACCESS_FLASH_CONF 0x7FFD0000 +#define FARX_ACCESS_FLASH_DATA 0x7FF00000 + +static inline uint32_t +flash_conf_addr(struct ql82xx_hw_data *hw, uint32_t faddr) +{ + return hw->flash_conf_off | faddr; +} + +static inline uint32_t +flash_data_addr(struct ql82xx_hw_data *hw, uint32_t faddr) +{ + return hw->flash_data_off | faddr; +} + +static uint32_t * +qla4_8xxx_read_flash_data(struct scsi_qla_host *ha, uint32_t *dwptr, + uint32_t faddr, uint32_t length) +{ + uint32_t i; + uint32_t val; + int loops = 0; + while ((qla4_8xxx_rom_lock(ha) != 0) && (loops < 50000)) { + udelay(100); + cond_resched(); + loops++; + } + if (loops >= 50000) { + ql4_printk(KERN_WARNING, ha, "ROM lock failed\n"); + return dwptr; + } + + /* Dword reads to flash. */ + for (i = 0; i < length/4; i++, faddr += 4) { + if (qla4_8xxx_do_rom_fast_read(ha, faddr, &val)) { + ql4_printk(KERN_WARNING, ha, + "Do ROM fast read failed\n"); + goto done_read; + } + dwptr[i] = __constant_cpu_to_le32(val); + } + +done_read: + qla4_8xxx_rom_unlock(ha); + return dwptr; +} + +/** + * Address and length are byte address + **/ +static uint8_t * +qla4_8xxx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + qla4_8xxx_read_flash_data(ha, (uint32_t *)buf, offset, length); + return buf; +} + +static int +qla4_8xxx_find_flt_start(struct scsi_qla_host *ha, uint32_t *start) +{ + const char *loc, *locations[] = { "DEF", "PCI" }; + + /* + * FLT-location structure resides after the last PCI region. + */ + + /* Begin with sane defaults. */ + loc = locations[0]; + *start = FA_FLASH_LAYOUT_ADDR_82; + + DEBUG2(ql4_printk(KERN_INFO, ha, "FLTL[%s] = 0x%x.\n", loc, *start)); + return QLA_SUCCESS; +} + +static void +qla4_8xxx_get_flt_info(struct scsi_qla_host *ha, uint32_t flt_addr) +{ + const char *loc, *locations[] = { "DEF", "FLT" }; + uint16_t *wptr; + uint16_t cnt, chksum; + uint32_t start; + struct qla_flt_header *flt; + struct qla_flt_region *region; + struct ql82xx_hw_data *hw = &ha->hw; + + hw->flt_region_flt = flt_addr; + wptr = (uint16_t *)ha->request_ring; + flt = (struct qla_flt_header *)ha->request_ring; + region = (struct qla_flt_region *)&flt[1]; + qla4_8xxx_read_optrom_data(ha, (uint8_t *)ha->request_ring, + flt_addr << 2, OPTROM_BURST_SIZE); + if (*wptr == __constant_cpu_to_le16(0xffff)) + goto no_flash_data; + if (flt->version != __constant_cpu_to_le16(1)) { + DEBUG2(ql4_printk(KERN_INFO, ha, "Unsupported FLT detected: " + "version=0x%x length=0x%x checksum=0x%x.\n", + le16_to_cpu(flt->version), le16_to_cpu(flt->length), + le16_to_cpu(flt->checksum))); + goto no_flash_data; + } + + cnt = (sizeof(struct qla_flt_header) + le16_to_cpu(flt->length)) >> 1; + for (chksum = 0; cnt; cnt--) + chksum += le16_to_cpu(*wptr++); + if (chksum) { + DEBUG2(ql4_printk(KERN_INFO, ha, "Inconsistent FLT detected: " + "version=0x%x length=0x%x checksum=0x%x.\n", + le16_to_cpu(flt->version), le16_to_cpu(flt->length), + chksum)); + goto no_flash_data; + } + + loc = locations[1]; + cnt = le16_to_cpu(flt->length) / sizeof(struct qla_flt_region); + for ( ; cnt; cnt--, region++) { + /* Store addresses as DWORD offsets. */ + start = le32_to_cpu(region->start) >> 2; + + DEBUG3(ql4_printk(KERN_DEBUG, ha, "FLT[%02x]: start=0x%x " + "end=0x%x size=0x%x.\n", le32_to_cpu(region->code), start, + le32_to_cpu(region->end) >> 2, le32_to_cpu(region->size))); + + switch (le32_to_cpu(region->code) & 0xff) { + case FLT_REG_FDT: + hw->flt_region_fdt = start; + break; + case FLT_REG_BOOT_CODE_82: + hw->flt_region_boot = start; + break; + case FLT_REG_FW_82: + hw->flt_region_fw = start; + break; + case FLT_REG_BOOTLOAD_82: + hw->flt_region_bootload = start; + break; + } + } + goto done; + +no_flash_data: + /* Use hardcoded defaults. */ + loc = locations[0]; + + hw->flt_region_fdt = FA_FLASH_DESCR_ADDR_82; + hw->flt_region_boot = FA_BOOT_CODE_ADDR_82; + hw->flt_region_bootload = FA_BOOT_LOAD_ADDR_82; + hw->flt_region_fw = FA_RISC_CODE_ADDR_82; +done: + DEBUG2(ql4_printk(KERN_INFO, ha, "FLT[%s]: flt=0x%x fdt=0x%x " + "boot=0x%x bootload=0x%x fw=0x%x\n", loc, hw->flt_region_flt, + hw->flt_region_fdt, hw->flt_region_boot, hw->flt_region_bootload, + hw->flt_region_fw)); +} + +static void +qla4_8xxx_get_fdt_info(struct scsi_qla_host *ha) +{ +#define FLASH_BLK_SIZE_4K 0x1000 +#define FLASH_BLK_SIZE_32K 0x8000 +#define FLASH_BLK_SIZE_64K 0x10000 + const char *loc, *locations[] = { "MID", "FDT" }; + uint16_t cnt, chksum; + uint16_t *wptr; + struct qla_fdt_layout *fdt; + uint16_t mid, fid; + struct ql82xx_hw_data *hw = &ha->hw; + + hw->flash_conf_off = FARX_ACCESS_FLASH_CONF; + hw->flash_data_off = FARX_ACCESS_FLASH_DATA; + + wptr = (uint16_t *)ha->request_ring; + fdt = (struct qla_fdt_layout *)ha->request_ring; + qla4_8xxx_read_optrom_data(ha, (uint8_t *)ha->request_ring, + hw->flt_region_fdt << 2, OPTROM_BURST_SIZE); + + if (*wptr == __constant_cpu_to_le16(0xffff)) + goto no_flash_data; + + if (fdt->sig[0] != 'Q' || fdt->sig[1] != 'L' || fdt->sig[2] != 'I' || + fdt->sig[3] != 'D') + goto no_flash_data; + + for (cnt = 0, chksum = 0; cnt < sizeof(struct qla_fdt_layout) >> 1; + cnt++) + chksum += le16_to_cpu(*wptr++); + + if (chksum) { + DEBUG2(ql4_printk(KERN_INFO, ha, "Inconsistent FDT detected: " + "checksum=0x%x id=%c version=0x%x.\n", chksum, fdt->sig[0], + le16_to_cpu(fdt->version))); + goto no_flash_data; + } + + loc = locations[1]; + mid = le16_to_cpu(fdt->man_id); + fid = le16_to_cpu(fdt->id); + hw->fdt_wrt_disable = fdt->wrt_disable_bits; + hw->fdt_erase_cmd = flash_conf_addr(hw, 0x0300 | fdt->erase_cmd); + hw->fdt_block_size = le32_to_cpu(fdt->block_size); + + if (fdt->unprotect_sec_cmd) { + hw->fdt_unprotect_sec_cmd = flash_conf_addr(hw, 0x0300 | + fdt->unprotect_sec_cmd); + hw->fdt_protect_sec_cmd = fdt->protect_sec_cmd ? + flash_conf_addr(hw, 0x0300 | fdt->protect_sec_cmd) : + flash_conf_addr(hw, 0x0336); + } + goto done; + +no_flash_data: + loc = locations[0]; + hw->fdt_block_size = FLASH_BLK_SIZE_64K; +done: + DEBUG2(ql4_printk(KERN_INFO, ha, "FDT[%s]: (0x%x/0x%x) erase=0x%x " + "pro=%x upro=%x wrtd=0x%x blk=0x%x.\n", loc, mid, fid, + hw->fdt_erase_cmd, hw->fdt_protect_sec_cmd, + hw->fdt_unprotect_sec_cmd, hw->fdt_wrt_disable, + hw->fdt_block_size)); +} + +static void +qla4_8xxx_get_idc_param(struct scsi_qla_host *ha) +{ +#define QLA82XX_IDC_PARAM_ADDR 0x003e885c + uint32_t *wptr; + + if (!is_qla8022(ha)) + return; + wptr = (uint32_t *)ha->request_ring; + qla4_8xxx_read_optrom_data(ha, (uint8_t *)ha->request_ring, + QLA82XX_IDC_PARAM_ADDR , 8); + + if (*wptr == __constant_cpu_to_le32(0xffffffff)) { + ha->nx_dev_init_timeout = ROM_DEV_INIT_TIMEOUT; + ha->nx_reset_timeout = ROM_DRV_RESET_ACK_TIMEOUT; + } else { + ha->nx_dev_init_timeout = le32_to_cpu(*wptr++); + ha->nx_reset_timeout = le32_to_cpu(*wptr); + } + + DEBUG2(ql4_printk(KERN_DEBUG, ha, + "ha->nx_dev_init_timeout = %d\n", ha->nx_dev_init_timeout)); + DEBUG2(ql4_printk(KERN_DEBUG, ha, + "ha->nx_reset_timeout = %d\n", ha->nx_reset_timeout)); + return; +} + +int +qla4_8xxx_get_flash_info(struct scsi_qla_host *ha) +{ + int ret; + uint32_t flt_addr; + + ret = qla4_8xxx_find_flt_start(ha, &flt_addr); + if (ret != QLA_SUCCESS) + return ret; + + qla4_8xxx_get_flt_info(ha, flt_addr); + qla4_8xxx_get_fdt_info(ha); + qla4_8xxx_get_idc_param(ha); + + return QLA_SUCCESS; +} + +/** + * qla4_8xxx_stop_firmware - stops firmware on specified adapter instance + * @ha: pointer to host adapter structure. + * + * Remarks: + * For iSCSI, throws away all I/O and AENs into bit bucket, so they will + * not be available after successful return. Driver must cleanup potential + * outstanding I/O's after calling this funcion. + **/ +int +qla4_8xxx_stop_firmware(struct scsi_qla_host *ha) +{ + int status; + uint32_t mbox_cmd[MBOX_REG_COUNT]; + uint32_t mbox_sts[MBOX_REG_COUNT]; + + memset(&mbox_cmd, 0, sizeof(mbox_cmd)); + memset(&mbox_sts, 0, sizeof(mbox_sts)); + + mbox_cmd[0] = MBOX_CMD_STOP_FW; + status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, + &mbox_cmd[0], &mbox_sts[0]); + + DEBUG2(printk("scsi%ld: %s: status = %d\n", ha->host_no, + __func__, status)); + return status; +} + +/** + * qla4_8xxx_isp_reset - Resets ISP and aborts all outstanding commands. + * @ha: pointer to host adapter structure. + **/ +int +qla4_8xxx_isp_reset(struct scsi_qla_host *ha) +{ + int rval; + uint32_t dev_state; + + qla4_8xxx_idc_lock(ha); + dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); + + if (dev_state == QLA82XX_DEV_READY) { + ql4_printk(KERN_INFO, ha, "HW State: NEED RESET\n"); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, + QLA82XX_DEV_NEED_RESET); + } else + ql4_printk(KERN_INFO, ha, "HW State: DEVICE INITIALIZING\n"); + + qla4_8xxx_idc_unlock(ha); + + rval = qla4_8xxx_device_state_handler(ha); + + qla4_8xxx_idc_lock(ha); + qla4_8xxx_clear_rst_ready(ha); + qla4_8xxx_idc_unlock(ha); + + return rval; +} + +/** + * qla4_8xxx_get_sys_info - get adapter MAC address(es) and serial number + * @ha: pointer to host adapter structure. + * + **/ +int qla4_8xxx_get_sys_info(struct scsi_qla_host *ha) +{ + uint32_t mbox_cmd[MBOX_REG_COUNT]; + uint32_t mbox_sts[MBOX_REG_COUNT]; + struct mbx_sys_info *sys_info; + dma_addr_t sys_info_dma; + int status = QLA_ERROR; + + sys_info = dma_alloc_coherent(&ha->pdev->dev, sizeof(*sys_info), + &sys_info_dma, GFP_KERNEL); + if (sys_info == NULL) { + DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n", + ha->host_no, __func__)); + return status; + } + + memset(sys_info, 0, sizeof(*sys_info)); + memset(&mbox_cmd, 0, sizeof(mbox_cmd)); + memset(&mbox_sts, 0, sizeof(mbox_sts)); + + mbox_cmd[0] = MBOX_CMD_GET_SYS_INFO; + mbox_cmd[1] = LSDW(sys_info_dma); + mbox_cmd[2] = MSDW(sys_info_dma); + mbox_cmd[4] = sizeof(*sys_info); + + if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 6, &mbox_cmd[0], + &mbox_sts[0]) != QLA_SUCCESS) { + DEBUG2(printk("scsi%ld: %s: GET_SYS_INFO failed\n", + ha->host_no, __func__)); + goto exit_validate_mac82; + } + + if (mbox_sts[4] < sizeof(*sys_info)) { + DEBUG2(printk("scsi%ld: %s: GET_SYS_INFO data receive" + " error (%x)\n", ha->host_no, __func__, mbox_sts[4])); + goto exit_validate_mac82; + + } + + /* Save M.A.C. address & serial_number */ + memcpy(ha->my_mac, &sys_info->mac_addr[0], + min(sizeof(ha->my_mac), sizeof(sys_info->mac_addr))); + memcpy(ha->serial_number, &sys_info->serial_number, + min(sizeof(ha->serial_number), sizeof(sys_info->serial_number))); + + DEBUG2(printk("scsi%ld: %s: " + "mac %02x:%02x:%02x:%02x:%02x:%02x " + "serial %s\n", ha->host_no, __func__, + ha->my_mac[0], ha->my_mac[1], ha->my_mac[2], + ha->my_mac[3], ha->my_mac[4], ha->my_mac[5], + ha->serial_number)); + + status = QLA_SUCCESS; + +exit_validate_mac82: + dma_free_coherent(&ha->pdev->dev, sizeof(*sys_info), sys_info, + sys_info_dma); + return status; +} + +/* Interrupt handling helpers. */ + +static int +qla4_8xxx_mbx_intr_enable(struct scsi_qla_host *ha) +{ + uint32_t mbox_cmd[MBOX_REG_COUNT]; + uint32_t mbox_sts[MBOX_REG_COUNT]; + + DEBUG2(ql4_printk(KERN_INFO, ha, "%s\n", __func__)); + + memset(&mbox_cmd, 0, sizeof(mbox_cmd)); + memset(&mbox_sts, 0, sizeof(mbox_sts)); + mbox_cmd[0] = MBOX_CMD_ENABLE_INTRS; + mbox_cmd[1] = INTR_ENABLE; + if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], + &mbox_sts[0]) != QLA_SUCCESS) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: MBOX_CMD_ENABLE_INTRS failed (0x%04x)\n", + __func__, mbox_sts[0])); + return QLA_ERROR; + } + return QLA_SUCCESS; +} + +static int +qla4_8xxx_mbx_intr_disable(struct scsi_qla_host *ha) +{ + uint32_t mbox_cmd[MBOX_REG_COUNT]; + uint32_t mbox_sts[MBOX_REG_COUNT]; + + DEBUG2(ql4_printk(KERN_INFO, ha, "%s\n", __func__)); + + memset(&mbox_cmd, 0, sizeof(mbox_cmd)); + memset(&mbox_sts, 0, sizeof(mbox_sts)); + mbox_cmd[0] = MBOX_CMD_ENABLE_INTRS; + mbox_cmd[1] = INTR_DISABLE; + if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], + &mbox_sts[0]) != QLA_SUCCESS) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: MBOX_CMD_ENABLE_INTRS failed (0x%04x)\n", + __func__, mbox_sts[0])); + return QLA_ERROR; + } + + return QLA_SUCCESS; +} + +void +qla4_8xxx_enable_intrs(struct scsi_qla_host *ha) +{ + qla4_8xxx_mbx_intr_enable(ha); + + spin_lock_irq(&ha->hardware_lock); + /* BIT 10 - reset */ + qla4_8xxx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, 0xfbff); + spin_unlock_irq(&ha->hardware_lock); + set_bit(AF_INTERRUPTS_ON, &ha->flags); +} + +void +qla4_8xxx_disable_intrs(struct scsi_qla_host *ha) +{ + if (test_bit(AF_INTERRUPTS_ON, &ha->flags)) + qla4_8xxx_mbx_intr_disable(ha); + + spin_lock_irq(&ha->hardware_lock); + /* BIT 10 - set */ + qla4_8xxx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, 0x0400); + spin_unlock_irq(&ha->hardware_lock); + clear_bit(AF_INTERRUPTS_ON, &ha->flags); +} + +struct ql4_init_msix_entry { + uint16_t entry; + uint16_t index; + const char *name; + irq_handler_t handler; +}; + +static struct ql4_init_msix_entry qla4_8xxx_msix_entries[QLA_MSIX_ENTRIES] = { + { QLA_MSIX_DEFAULT, QLA_MIDX_DEFAULT, + "qla4xxx (default)", + (irq_handler_t)qla4_8xxx_default_intr_handler }, + { QLA_MSIX_RSP_Q, QLA_MIDX_RSP_Q, + "qla4xxx (rsp_q)", (irq_handler_t)qla4_8xxx_msix_rsp_q }, +}; + +void +qla4_8xxx_disable_msix(struct scsi_qla_host *ha) +{ + int i; + struct ql4_msix_entry *qentry; + + for (i = 0; i < QLA_MSIX_ENTRIES; i++) { + qentry = &ha->msix_entries[qla4_8xxx_msix_entries[i].index]; + if (qentry->have_irq) { + free_irq(qentry->msix_vector, ha); + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: %s\n", + __func__, qla4_8xxx_msix_entries[i].name)); + } + } + pci_disable_msix(ha->pdev); + clear_bit(AF_MSIX_ENABLED, &ha->flags); +} + +int +qla4_8xxx_enable_msix(struct scsi_qla_host *ha) +{ + int i, ret; + struct msix_entry entries[QLA_MSIX_ENTRIES]; + struct ql4_msix_entry *qentry; + + for (i = 0; i < QLA_MSIX_ENTRIES; i++) + entries[i].entry = qla4_8xxx_msix_entries[i].entry; + + ret = pci_enable_msix(ha->pdev, entries, ARRAY_SIZE(entries)); + if (ret) { + ql4_printk(KERN_WARNING, ha, + "MSI-X: Failed to enable support -- %d/%d\n", + QLA_MSIX_ENTRIES, ret); + goto msix_out; + } + set_bit(AF_MSIX_ENABLED, &ha->flags); + + for (i = 0; i < QLA_MSIX_ENTRIES; i++) { + qentry = &ha->msix_entries[qla4_8xxx_msix_entries[i].index]; + qentry->msix_vector = entries[i].vector; + qentry->msix_entry = entries[i].entry; + qentry->have_irq = 0; + ret = request_irq(qentry->msix_vector, + qla4_8xxx_msix_entries[i].handler, 0, + qla4_8xxx_msix_entries[i].name, ha); + if (ret) { + ql4_printk(KERN_WARNING, ha, + "MSI-X: Unable to register handler -- %x/%d.\n", + qla4_8xxx_msix_entries[i].index, ret); + qla4_8xxx_disable_msix(ha); + goto msix_out; + } + qentry->have_irq = 1; + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: %s\n", + __func__, qla4_8xxx_msix_entries[i].name)); + } +msix_out: + return ret; +} diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h new file mode 100644 index 0000000000000000000000000000000000000000..931ad3f1e918c12b1289839d8ea9a8d556658475 --- /dev/null +++ b/drivers/scsi/qla4xxx/ql4_nx.h @@ -0,0 +1,779 @@ +/* + * QLogic Fibre Channel HBA Driver + * Copyright (c) 2003-2008 QLogic Corporation + * + * See LICENSE.qla2xxx for copyright and licensing details. + */ +#ifndef __QLA_NX_H +#define __QLA_NX_H + +/* + * Following are the states of the Phantom. Phantom will set them and + * Host will read to check if the fields are correct. +*/ +#define PHAN_INITIALIZE_FAILED 0xffff +#define PHAN_INITIALIZE_COMPLETE 0xff01 + +/* Host writes the following to notify that it has done the init-handshake */ +#define PHAN_INITIALIZE_ACK 0xf00f +#define PHAN_PEG_RCV_INITIALIZED 0xff01 + +/*CRB_RELATED*/ +#define QLA82XX_CRB_BASE QLA82XX_CAM_RAM(0x200) +#define QLA82XX_REG(X) (QLA82XX_CRB_BASE+(X)) + +#define CRB_CMDPEG_STATE QLA82XX_REG(0x50) +#define CRB_RCVPEG_STATE QLA82XX_REG(0x13c) +#define BOOT_LOADER_DIMM_STATUS QLA82XX_REG(0x54) +#define CRB_DMA_SHIFT QLA82XX_REG(0xcc) + +#define QLA82XX_HW_H0_CH_HUB_ADR 0x05 +#define QLA82XX_HW_H1_CH_HUB_ADR 0x0E +#define QLA82XX_HW_H2_CH_HUB_ADR 0x03 +#define QLA82XX_HW_H3_CH_HUB_ADR 0x01 +#define QLA82XX_HW_H4_CH_HUB_ADR 0x06 +#define QLA82XX_HW_H5_CH_HUB_ADR 0x07 +#define QLA82XX_HW_H6_CH_HUB_ADR 0x08 + +/* Hub 0 */ +#define QLA82XX_HW_MN_CRB_AGT_ADR 0x15 +#define QLA82XX_HW_MS_CRB_AGT_ADR 0x25 + +/* Hub 1 */ +#define QLA82XX_HW_PS_CRB_AGT_ADR 0x73 +#define QLA82XX_HW_QMS_CRB_AGT_ADR 0x00 +#define QLA82XX_HW_RPMX3_CRB_AGT_ADR 0x0b +#define QLA82XX_HW_SQGS0_CRB_AGT_ADR 0x01 +#define QLA82XX_HW_SQGS1_CRB_AGT_ADR 0x02 +#define QLA82XX_HW_SQGS2_CRB_AGT_ADR 0x03 +#define QLA82XX_HW_SQGS3_CRB_AGT_ADR 0x04 +#define QLA82XX_HW_C2C0_CRB_AGT_ADR 0x58 +#define QLA82XX_HW_C2C1_CRB_AGT_ADR 0x59 +#define QLA82XX_HW_C2C2_CRB_AGT_ADR 0x5a +#define QLA82XX_HW_RPMX2_CRB_AGT_ADR 0x0a +#define QLA82XX_HW_RPMX4_CRB_AGT_ADR 0x0c +#define QLA82XX_HW_RPMX7_CRB_AGT_ADR 0x0f +#define QLA82XX_HW_RPMX9_CRB_AGT_ADR 0x12 +#define QLA82XX_HW_SMB_CRB_AGT_ADR 0x18 + +/* Hub 2 */ +#define QLA82XX_HW_NIU_CRB_AGT_ADR 0x31 +#define QLA82XX_HW_I2C0_CRB_AGT_ADR 0x19 +#define QLA82XX_HW_I2C1_CRB_AGT_ADR 0x29 + +#define QLA82XX_HW_SN_CRB_AGT_ADR 0x10 +#define QLA82XX_HW_I2Q_CRB_AGT_ADR 0x20 +#define QLA82XX_HW_LPC_CRB_AGT_ADR 0x22 +#define QLA82XX_HW_ROMUSB_CRB_AGT_ADR 0x21 +#define QLA82XX_HW_QM_CRB_AGT_ADR 0x66 +#define QLA82XX_HW_SQG0_CRB_AGT_ADR 0x60 +#define QLA82XX_HW_SQG1_CRB_AGT_ADR 0x61 +#define QLA82XX_HW_SQG2_CRB_AGT_ADR 0x62 +#define QLA82XX_HW_SQG3_CRB_AGT_ADR 0x63 +#define QLA82XX_HW_RPMX1_CRB_AGT_ADR 0x09 +#define QLA82XX_HW_RPMX5_CRB_AGT_ADR 0x0d +#define QLA82XX_HW_RPMX6_CRB_AGT_ADR 0x0e +#define QLA82XX_HW_RPMX8_CRB_AGT_ADR 0x11 + +/* Hub 3 */ +#define QLA82XX_HW_PH_CRB_AGT_ADR 0x1A +#define QLA82XX_HW_SRE_CRB_AGT_ADR 0x50 +#define QLA82XX_HW_EG_CRB_AGT_ADR 0x51 +#define QLA82XX_HW_RPMX0_CRB_AGT_ADR 0x08 + +/* Hub 4 */ +#define QLA82XX_HW_PEGN0_CRB_AGT_ADR 0x40 +#define QLA82XX_HW_PEGN1_CRB_AGT_ADR 0x41 +#define QLA82XX_HW_PEGN2_CRB_AGT_ADR 0x42 +#define QLA82XX_HW_PEGN3_CRB_AGT_ADR 0x43 +#define QLA82XX_HW_PEGNI_CRB_AGT_ADR 0x44 +#define QLA82XX_HW_PEGND_CRB_AGT_ADR 0x45 +#define QLA82XX_HW_PEGNC_CRB_AGT_ADR 0x46 +#define QLA82XX_HW_PEGR0_CRB_AGT_ADR 0x47 +#define QLA82XX_HW_PEGR1_CRB_AGT_ADR 0x48 +#define QLA82XX_HW_PEGR2_CRB_AGT_ADR 0x49 +#define QLA82XX_HW_PEGR3_CRB_AGT_ADR 0x4a +#define QLA82XX_HW_PEGN4_CRB_AGT_ADR 0x4b + +/* Hub 5 */ +#define QLA82XX_HW_PEGS0_CRB_AGT_ADR 0x40 +#define QLA82XX_HW_PEGS1_CRB_AGT_ADR 0x41 +#define QLA82XX_HW_PEGS2_CRB_AGT_ADR 0x42 +#define QLA82XX_HW_PEGS3_CRB_AGT_ADR 0x43 + +#define QLA82XX_HW_PEGSI_CRB_AGT_ADR 0x44 +#define QLA82XX_HW_PEGSD_CRB_AGT_ADR 0x45 +#define QLA82XX_HW_PEGSC_CRB_AGT_ADR 0x46 + +/* Hub 6 */ +#define QLA82XX_HW_CAS0_CRB_AGT_ADR 0x46 +#define QLA82XX_HW_CAS1_CRB_AGT_ADR 0x47 +#define QLA82XX_HW_CAS2_CRB_AGT_ADR 0x48 +#define QLA82XX_HW_CAS3_CRB_AGT_ADR 0x49 +#define QLA82XX_HW_NCM_CRB_AGT_ADR 0x16 +#define QLA82XX_HW_TMR_CRB_AGT_ADR 0x17 +#define QLA82XX_HW_XDMA_CRB_AGT_ADR 0x05 +#define QLA82XX_HW_OCM0_CRB_AGT_ADR 0x06 +#define QLA82XX_HW_OCM1_CRB_AGT_ADR 0x07 + +/* This field defines PCI/X adr [25:20] of agents on the CRB */ +/* */ +#define QLA82XX_HW_PX_MAP_CRB_PH 0 +#define QLA82XX_HW_PX_MAP_CRB_PS 1 +#define QLA82XX_HW_PX_MAP_CRB_MN 2 +#define QLA82XX_HW_PX_MAP_CRB_MS 3 +#define QLA82XX_HW_PX_MAP_CRB_SRE 5 +#define QLA82XX_HW_PX_MAP_CRB_NIU 6 +#define QLA82XX_HW_PX_MAP_CRB_QMN 7 +#define QLA82XX_HW_PX_MAP_CRB_SQN0 8 +#define QLA82XX_HW_PX_MAP_CRB_SQN1 9 +#define QLA82XX_HW_PX_MAP_CRB_SQN2 10 +#define QLA82XX_HW_PX_MAP_CRB_SQN3 11 +#define QLA82XX_HW_PX_MAP_CRB_QMS 12 +#define QLA82XX_HW_PX_MAP_CRB_SQS0 13 +#define QLA82XX_HW_PX_MAP_CRB_SQS1 14 +#define QLA82XX_HW_PX_MAP_CRB_SQS2 15 +#define QLA82XX_HW_PX_MAP_CRB_SQS3 16 +#define QLA82XX_HW_PX_MAP_CRB_PGN0 17 +#define QLA82XX_HW_PX_MAP_CRB_PGN1 18 +#define QLA82XX_HW_PX_MAP_CRB_PGN2 19 +#define QLA82XX_HW_PX_MAP_CRB_PGN3 20 +#define QLA82XX_HW_PX_MAP_CRB_PGN4 QLA82XX_HW_PX_MAP_CRB_SQS2 +#define QLA82XX_HW_PX_MAP_CRB_PGND 21 +#define QLA82XX_HW_PX_MAP_CRB_PGNI 22 +#define QLA82XX_HW_PX_MAP_CRB_PGS0 23 +#define QLA82XX_HW_PX_MAP_CRB_PGS1 24 +#define QLA82XX_HW_PX_MAP_CRB_PGS2 25 +#define QLA82XX_HW_PX_MAP_CRB_PGS3 26 +#define QLA82XX_HW_PX_MAP_CRB_PGSD 27 +#define QLA82XX_HW_PX_MAP_CRB_PGSI 28 +#define QLA82XX_HW_PX_MAP_CRB_SN 29 +#define QLA82XX_HW_PX_MAP_CRB_EG 31 +#define QLA82XX_HW_PX_MAP_CRB_PH2 32 +#define QLA82XX_HW_PX_MAP_CRB_PS2 33 +#define QLA82XX_HW_PX_MAP_CRB_CAM 34 +#define QLA82XX_HW_PX_MAP_CRB_CAS0 35 +#define QLA82XX_HW_PX_MAP_CRB_CAS1 36 +#define QLA82XX_HW_PX_MAP_CRB_CAS2 37 +#define QLA82XX_HW_PX_MAP_CRB_C2C0 38 +#define QLA82XX_HW_PX_MAP_CRB_C2C1 39 +#define QLA82XX_HW_PX_MAP_CRB_TIMR 40 +#define QLA82XX_HW_PX_MAP_CRB_RPMX1 42 +#define QLA82XX_HW_PX_MAP_CRB_RPMX2 43 +#define QLA82XX_HW_PX_MAP_CRB_RPMX3 44 +#define QLA82XX_HW_PX_MAP_CRB_RPMX4 45 +#define QLA82XX_HW_PX_MAP_CRB_RPMX5 46 +#define QLA82XX_HW_PX_MAP_CRB_RPMX6 47 +#define QLA82XX_HW_PX_MAP_CRB_RPMX7 48 +#define QLA82XX_HW_PX_MAP_CRB_XDMA 49 +#define QLA82XX_HW_PX_MAP_CRB_I2Q 50 +#define QLA82XX_HW_PX_MAP_CRB_ROMUSB 51 +#define QLA82XX_HW_PX_MAP_CRB_CAS3 52 +#define QLA82XX_HW_PX_MAP_CRB_RPMX0 53 +#define QLA82XX_HW_PX_MAP_CRB_RPMX8 54 +#define QLA82XX_HW_PX_MAP_CRB_RPMX9 55 +#define QLA82XX_HW_PX_MAP_CRB_OCM0 56 +#define QLA82XX_HW_PX_MAP_CRB_OCM1 57 +#define QLA82XX_HW_PX_MAP_CRB_SMB 58 +#define QLA82XX_HW_PX_MAP_CRB_I2C0 59 +#define QLA82XX_HW_PX_MAP_CRB_I2C1 60 +#define QLA82XX_HW_PX_MAP_CRB_LPC 61 +#define QLA82XX_HW_PX_MAP_CRB_PGNC 62 +#define QLA82XX_HW_PX_MAP_CRB_PGR0 63 +#define QLA82XX_HW_PX_MAP_CRB_PGR1 4 +#define QLA82XX_HW_PX_MAP_CRB_PGR2 30 +#define QLA82XX_HW_PX_MAP_CRB_PGR3 41 + +/* This field defines CRB adr [31:20] of the agents */ +/* */ + +#define QLA82XX_HW_CRB_HUB_AGT_ADR_MN ((QLA82XX_HW_H0_CH_HUB_ADR << 7) | \ + QLA82XX_HW_MN_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PH ((QLA82XX_HW_H0_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PH_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_MS ((QLA82XX_HW_H0_CH_HUB_ADR << 7) | \ + QLA82XX_HW_MS_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PS ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PS_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SS ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SS_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX3 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX3_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_QMS ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_QMS_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQS0 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQGS0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQS1 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQGS1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQS2 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQGS2_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQS3 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQGS3_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_C2C0 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_C2C0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_C2C1 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_C2C1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX2 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX2_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX4 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX4_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX7 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX7_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX9 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX9_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SMB ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SMB_CRB_AGT_ADR) + +#define QLA82XX_HW_CRB_HUB_AGT_ADR_NIU ((QLA82XX_HW_H2_CH_HUB_ADR << 7) | \ + QLA82XX_HW_NIU_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_I2C0 ((QLA82XX_HW_H2_CH_HUB_ADR << 7) | \ + QLA82XX_HW_I2C0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_I2C1 ((QLA82XX_HW_H2_CH_HUB_ADR << 7) | \ + QLA82XX_HW_I2C1_CRB_AGT_ADR) + +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SRE ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SRE_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_EG ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_EG_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX0 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_QMN ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_QM_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQN0 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQG0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQN1 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQG1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQN2 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQG2_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQN3 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQG3_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX1 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX5 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX5_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX6 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX6_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX8 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX8_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_CAS0 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_CAS0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_CAS1 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_CAS1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_CAS2 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_CAS2_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_CAS3 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_CAS3_CRB_AGT_ADR) + +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGNI ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGNI_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGND ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGND_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGN0 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGN0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGN1 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGN1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGN2 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGN2_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGN3 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGN3_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGN4 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGN4_CRB_AGT_ADR) + +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGNC ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGNC_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGR0 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGR0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGR1 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGR1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGR2 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGR2_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGR3 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGR3_CRB_AGT_ADR) + +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGSI ((QLA82XX_HW_H5_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGSI_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGSD ((QLA82XX_HW_H5_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGSD_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGS0 ((QLA82XX_HW_H5_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGS0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGS1 ((QLA82XX_HW_H5_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGS1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGS2 ((QLA82XX_HW_H5_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGS2_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGS3 ((QLA82XX_HW_H5_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGS3_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGSC ((QLA82XX_HW_H5_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGSC_CRB_AGT_ADR) + +#define QLA82XX_HW_CRB_HUB_AGT_ADR_CAM ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_NCM_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_TIMR ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_TMR_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_XDMA ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_XDMA_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SN ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SN_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_I2Q ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_I2Q_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_ROMUSB ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_ROMUSB_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_OCM0 ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_OCM0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_OCM1 ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_OCM1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_LPC ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_LPC_CRB_AGT_ADR) + +#define ROMUSB_GLB (QLA82XX_CRB_ROMUSB + 0x00000) +#define QLA82XX_ROMUSB_GLB_PEGTUNE_DONE (ROMUSB_GLB + 0x005c) +#define QLA82XX_ROMUSB_GLB_STATUS (ROMUSB_GLB + 0x0004) +#define QLA82XX_ROMUSB_GLB_SW_RESET (ROMUSB_GLB + 0x0008) +#define QLA82XX_ROMUSB_ROM_ADDRESS (ROMUSB_ROM + 0x0008) +#define QLA82XX_ROMUSB_ROM_WDATA (ROMUSB_ROM + 0x000c) +#define QLA82XX_ROMUSB_ROM_ABYTE_CNT (ROMUSB_ROM + 0x0010) +#define QLA82XX_ROMUSB_ROM_DUMMY_BYTE_CNT (ROMUSB_ROM + 0x0014) +#define QLA82XX_ROMUSB_ROM_RDATA (ROMUSB_ROM + 0x0018) + +#define ROMUSB_ROM (QLA82XX_CRB_ROMUSB + 0x10000) +#define QLA82XX_ROMUSB_ROM_INSTR_OPCODE (ROMUSB_ROM + 0x0004) +#define QLA82XX_ROMUSB_GLB_CAS_RST (ROMUSB_GLB + 0x0038) + +/* Lock IDs for ROM lock */ +#define ROM_LOCK_DRIVER 0x0d417340 + +#define QLA82XX_PCI_CRB_WINDOWSIZE 0x00100000 /* all are 1MB windows */ +#define QLA82XX_PCI_CRB_WINDOW(A) (QLA82XX_PCI_CRBSPACE + \ + (A)*QLA82XX_PCI_CRB_WINDOWSIZE) + +#define QLA82XX_CRB_C2C_0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_C2C0) +#define QLA82XX_CRB_C2C_1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_C2C1) +#define QLA82XX_CRB_C2C_2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_C2C2) +#define QLA82XX_CRB_CAM \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_CAM) +#define QLA82XX_CRB_CASPER \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_CAS) +#define QLA82XX_CRB_CASPER_0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_CAS0) +#define QLA82XX_CRB_CASPER_1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_CAS1) +#define QLA82XX_CRB_CASPER_2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_CAS2) +#define QLA82XX_CRB_DDR_MD \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_MS) +#define QLA82XX_CRB_DDR_NET \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_MN) +#define QLA82XX_CRB_EPG \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_EG) +#define QLA82XX_CRB_I2Q \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_I2Q) +#define QLA82XX_CRB_NIU \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_NIU) +/* HACK upon HACK upon HACK (for PCIE builds) */ +#define QLA82XX_CRB_PCIX_HOST \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PH) +#define QLA82XX_CRB_PCIX_HOST2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PH2) +#define QLA82XX_CRB_PCIX_MD \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PS) +#define QLA82XX_CRB_PCIE QLA82XX_CRB_PCIX_MD +/* window 1 pcie slot */ +#define QLA82XX_CRB_PCIE2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PS2) + +#define QLA82XX_CRB_PEG_MD_0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGS0) +#define QLA82XX_CRB_PEG_MD_1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGS1) +#define QLA82XX_CRB_PEG_MD_2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGS2) +#define QLA82XX_CRB_PEG_MD_3 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGS3) +#define QLA82XX_CRB_PEG_MD_3 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGS3) +#define QLA82XX_CRB_PEG_MD_D \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGSD) +#define QLA82XX_CRB_PEG_MD_I \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGSI) +#define QLA82XX_CRB_PEG_NET_0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGN0) +#define QLA82XX_CRB_PEG_NET_1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGN1) +#define QLA82XX_CRB_PEG_NET_2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGN2) +#define QLA82XX_CRB_PEG_NET_3 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGN3) +#define QLA82XX_CRB_PEG_NET_4 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGN4) +#define QLA82XX_CRB_PEG_NET_D \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGND) +#define QLA82XX_CRB_PEG_NET_I \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGNI) +#define QLA82XX_CRB_PQM_MD \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_QMS) +#define QLA82XX_CRB_PQM_NET \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_QMN) +#define QLA82XX_CRB_QDR_MD \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SS) +#define QLA82XX_CRB_QDR_NET \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SN) +#define QLA82XX_CRB_ROMUSB \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_ROMUSB) +#define QLA82XX_CRB_RPMX_0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX0) +#define QLA82XX_CRB_RPMX_1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX1) +#define QLA82XX_CRB_RPMX_2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX2) +#define QLA82XX_CRB_RPMX_3 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX3) +#define QLA82XX_CRB_RPMX_4 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX4) +#define QLA82XX_CRB_RPMX_5 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX5) +#define QLA82XX_CRB_RPMX_6 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX6) +#define QLA82XX_CRB_RPMX_7 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX7) +#define QLA82XX_CRB_SQM_MD_0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQS0) +#define QLA82XX_CRB_SQM_MD_1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQS1) +#define QLA82XX_CRB_SQM_MD_2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQS2) +#define QLA82XX_CRB_SQM_MD_3 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQS3) +#define QLA82XX_CRB_SQM_NET_0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQN0) +#define QLA82XX_CRB_SQM_NET_1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQN1) +#define QLA82XX_CRB_SQM_NET_2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQN2) +#define QLA82XX_CRB_SQM_NET_3 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQN3) +#define QLA82XX_CRB_SRE \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SRE) +#define QLA82XX_CRB_TIMER \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_TIMR) +#define QLA82XX_CRB_XDMA \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_XDMA) +#define QLA82XX_CRB_I2C0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_I2C0) +#define QLA82XX_CRB_I2C1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_I2C1) +#define QLA82XX_CRB_OCM0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_OCM0) +#define QLA82XX_CRB_SMB \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SMB) + +#define QLA82XX_CRB_MAX QLA82XX_PCI_CRB_WINDOW(64) + +/* + * ====================== BASE ADDRESSES ON-CHIP ====================== + * Base addresses of major components on-chip. + * ====================== BASE ADDRESSES ON-CHIP ====================== + */ +#define QLA82XX_ADDR_DDR_NET (0x0000000000000000ULL) +#define QLA82XX_ADDR_DDR_NET_MAX (0x000000000fffffffULL) + +/* Imbus address bit used to indicate a host address. This bit is + * eliminated by the pcie bar and bar select before presentation + * over pcie. */ +/* host memory via IMBUS */ +#define QLA82XX_P2_ADDR_PCIE (0x0000000800000000ULL) +#define QLA82XX_P3_ADDR_PCIE (0x0000008000000000ULL) +#define QLA82XX_ADDR_PCIE_MAX (0x0000000FFFFFFFFFULL) +#define QLA82XX_ADDR_OCM0 (0x0000000200000000ULL) +#define QLA82XX_ADDR_OCM0_MAX (0x00000002000fffffULL) +#define QLA82XX_ADDR_OCM1 (0x0000000200400000ULL) +#define QLA82XX_ADDR_OCM1_MAX (0x00000002004fffffULL) +#define QLA82XX_ADDR_QDR_NET (0x0000000300000000ULL) + +#define QLA82XX_P2_ADDR_QDR_NET_MAX (0x00000003001fffffULL) +#define QLA82XX_P3_ADDR_QDR_NET_MAX (0x0000000303ffffffULL) + +#define QLA82XX_PCI_CRBSPACE (unsigned long)0x06000000 +#define QLA82XX_PCI_DIRECT_CRB (unsigned long)0x04400000 +#define QLA82XX_PCI_CAMQM (unsigned long)0x04800000 +#define QLA82XX_PCI_CAMQM_MAX (unsigned long)0x04ffffff +#define QLA82XX_PCI_DDR_NET (unsigned long)0x00000000 +#define QLA82XX_PCI_QDR_NET (unsigned long)0x04000000 +#define QLA82XX_PCI_QDR_NET_MAX (unsigned long)0x043fffff + +/* + * Register offsets for MN + */ +#define MIU_CONTROL (0x000) +#define MIU_TAG (0x004) +#define MIU_TEST_AGT_CTRL (0x090) +#define MIU_TEST_AGT_ADDR_LO (0x094) +#define MIU_TEST_AGT_ADDR_HI (0x098) +#define MIU_TEST_AGT_WRDATA_LO (0x0a0) +#define MIU_TEST_AGT_WRDATA_HI (0x0a4) +#define MIU_TEST_AGT_WRDATA(i) (0x0a0+(4*(i))) +#define MIU_TEST_AGT_RDDATA_LO (0x0a8) +#define MIU_TEST_AGT_RDDATA_HI (0x0ac) +#define MIU_TEST_AGT_RDDATA(i) (0x0a8+(4*(i))) +#define MIU_TEST_AGT_ADDR_MASK 0xfffffff8 +#define MIU_TEST_AGT_UPPER_ADDR(off) (0) + +/* MIU_TEST_AGT_CTRL flags. work for SIU as well */ +#define MIU_TA_CTL_START 1 +#define MIU_TA_CTL_ENABLE 2 +#define MIU_TA_CTL_WRITE 4 +#define MIU_TA_CTL_BUSY 8 + +/*CAM RAM */ +# define QLA82XX_CAM_RAM_BASE (QLA82XX_CRB_CAM + 0x02000) +# define QLA82XX_CAM_RAM(reg) (QLA82XX_CAM_RAM_BASE + (reg)) + +#define QLA82XX_PEG_TUNE_MN_SPD_ZEROED 0x80000000 +#define QLA82XX_BOOT_LOADER_MN_ISSUE 0xff00ffff +#define QLA82XX_PORT_MODE_ADDR (QLA82XX_CAM_RAM(0x24)) +#define QLA82XX_PEG_HALT_STATUS1 (QLA82XX_CAM_RAM(0xa8)) +#define QLA82XX_PEG_HALT_STATUS2 (QLA82XX_CAM_RAM(0xac)) +#define QLA82XX_PEG_ALIVE_COUNTER (QLA82XX_CAM_RAM(0xb0)) + +#define HALT_STATUS_UNRECOVERABLE 0x80000000 +#define HALT_STATUS_RECOVERABLE 0x40000000 + + +#define QLA82XX_ROM_LOCK_ID (QLA82XX_CAM_RAM(0x100)) +#define QLA82XX_CRB_WIN_LOCK_ID (QLA82XX_CAM_RAM(0x124)) +#define QLA82XX_FW_VERSION_MAJOR (QLA82XX_CAM_RAM(0x150)) +#define QLA82XX_FW_VERSION_MINOR (QLA82XX_CAM_RAM(0x154)) +#define QLA82XX_FW_VERSION_SUB (QLA82XX_CAM_RAM(0x158)) +#define QLA82XX_PCIE_REG(reg) (QLA82XX_CRB_PCIE + (reg)) + +/* Driver Coexistence Defines */ +#define QLA82XX_CRB_DRV_ACTIVE (QLA82XX_CAM_RAM(0x138)) +#define QLA82XX_CRB_DEV_STATE (QLA82XX_CAM_RAM(0x140)) +#define QLA82XX_CRB_DEV_PART_INFO (QLA82XX_CAM_RAM(0x14c)) +#define QLA82XX_CRB_DRV_IDC_VERSION (QLA82XX_CAM_RAM(0x174)) +#define QLA82XX_CRB_DRV_STATE (QLA82XX_CAM_RAM(0x144)) +#define QLA82XX_CRB_DRV_SCRATCH (QLA82XX_CAM_RAM(0x148)) +#define QLA82XX_CRB_DEV_PART_INFO (QLA82XX_CAM_RAM(0x14c)) + +/* Every driver should use these Device State */ +#define QLA82XX_DEV_COLD 1 +#define QLA82XX_DEV_INITIALIZING 2 +#define QLA82XX_DEV_READY 3 +#define QLA82XX_DEV_NEED_RESET 4 +#define QLA82XX_DEV_NEED_QUIESCENT 5 +#define QLA82XX_DEV_FAILED 6 +#define QLA82XX_DEV_QUIESCENT 7 +#define MAX_STATES 8 /* Increment if new state added */ + +#define QLA82XX_IDC_VERSION 0x1 +#define ROM_DEV_INIT_TIMEOUT 30 +#define ROM_DRV_RESET_ACK_TIMEOUT 10 + +#define PCIE_SETUP_FUNCTION (0x12040) +#define PCIE_SETUP_FUNCTION2 (0x12048) + +#define QLA82XX_PCIX_PS_REG(reg) (QLA82XX_CRB_PCIX_MD + (reg)) +#define QLA82XX_PCIX_PS2_REG(reg) (QLA82XX_CRB_PCIE2 + (reg)) + +#define PCIE_SEM2_LOCK (0x1c010) /* Flash lock */ +#define PCIE_SEM2_UNLOCK (0x1c014) /* Flash unlock */ +#define PCIE_SEM5_LOCK (0x1c028) /* Coexistence lock */ +#define PCIE_SEM5_UNLOCK (0x1c02c) /* Coexistence unlock */ +#define PCIE_SEM7_LOCK (0x1c038) /* crb win lock */ +#define PCIE_SEM7_UNLOCK (0x1c03c) /* crbwin unlock*/ + +/* + * The PCI VendorID and DeviceID for our board. + */ +#define QLA82XX_MSIX_TBL_SPACE 8192 +#define QLA82XX_PCI_REG_MSIX_TBL 0x44 +#define QLA82XX_PCI_MSIX_CONTROL 0x40 + +struct crb_128M_2M_sub_block_map { + unsigned valid; + unsigned start_128M; + unsigned end_128M; + unsigned start_2M; +}; + +struct crb_128M_2M_block_map { + struct crb_128M_2M_sub_block_map sub_block[16]; +}; + +struct crb_addr_pair { + long addr; + long data; +}; + +#define ADDR_ERROR ((unsigned long) 0xffffffff) +#define MAX_CTL_CHECK 1000 + +/*************************************************************************** + * PCI related defines. + **************************************************************************/ + +/* + * Interrupt related defines. + */ +#define PCIX_TARGET_STATUS (0x10118) +#define PCIX_TARGET_STATUS_F1 (0x10160) +#define PCIX_TARGET_STATUS_F2 (0x10164) +#define PCIX_TARGET_STATUS_F3 (0x10168) +#define PCIX_TARGET_STATUS_F4 (0x10360) +#define PCIX_TARGET_STATUS_F5 (0x10364) +#define PCIX_TARGET_STATUS_F6 (0x10368) +#define PCIX_TARGET_STATUS_F7 (0x1036c) + +#define PCIX_TARGET_MASK (0x10128) +#define PCIX_TARGET_MASK_F1 (0x10170) +#define PCIX_TARGET_MASK_F2 (0x10174) +#define PCIX_TARGET_MASK_F3 (0x10178) +#define PCIX_TARGET_MASK_F4 (0x10370) +#define PCIX_TARGET_MASK_F5 (0x10374) +#define PCIX_TARGET_MASK_F6 (0x10378) +#define PCIX_TARGET_MASK_F7 (0x1037c) + +/* + * Message Signaled Interrupts + */ +#define PCIX_MSI_F0 (0x13000) +#define PCIX_MSI_F1 (0x13004) +#define PCIX_MSI_F2 (0x13008) +#define PCIX_MSI_F3 (0x1300c) +#define PCIX_MSI_F4 (0x13010) +#define PCIX_MSI_F5 (0x13014) +#define PCIX_MSI_F6 (0x13018) +#define PCIX_MSI_F7 (0x1301c) +#define PCIX_MSI_F(FUNC) (0x13000 + ((FUNC) * 4)) + +/* + * + */ +#define PCIX_INT_VECTOR (0x10100) +#define PCIX_INT_MASK (0x10104) + +/* + * Interrupt state machine and other bits. + */ +#define PCIE_MISCCFG_RC (0x1206c) + + +#define ISR_INT_TARGET_STATUS \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS)) +#define ISR_INT_TARGET_STATUS_F1 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS_F1)) +#define ISR_INT_TARGET_STATUS_F2 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS_F2)) +#define ISR_INT_TARGET_STATUS_F3 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS_F3)) +#define ISR_INT_TARGET_STATUS_F4 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS_F4)) +#define ISR_INT_TARGET_STATUS_F5 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS_F5)) +#define ISR_INT_TARGET_STATUS_F6 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS_F6)) +#define ISR_INT_TARGET_STATUS_F7 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS_F7)) + +#define ISR_INT_TARGET_MASK \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK)) +#define ISR_INT_TARGET_MASK_F1 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK_F1)) +#define ISR_INT_TARGET_MASK_F2 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK_F2)) +#define ISR_INT_TARGET_MASK_F3 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK_F3)) +#define ISR_INT_TARGET_MASK_F4 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK_F4)) +#define ISR_INT_TARGET_MASK_F5 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK_F5)) +#define ISR_INT_TARGET_MASK_F6 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK_F6)) +#define ISR_INT_TARGET_MASK_F7 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK_F7)) + +#define ISR_INT_VECTOR (QLA82XX_PCIX_PS_REG(PCIX_INT_VECTOR)) +#define ISR_INT_MASK (QLA82XX_PCIX_PS_REG(PCIX_INT_MASK)) +#define ISR_INT_STATE_REG (QLA82XX_PCIX_PS_REG(PCIE_MISCCFG_RC)) + +#define ISR_MSI_INT_TRIGGER(FUNC) (QLA82XX_PCIX_PS_REG(PCIX_MSI_F(FUNC))) + + +#define ISR_IS_LEGACY_INTR_IDLE(VAL) (((VAL) & 0x300) == 0) +#define ISR_IS_LEGACY_INTR_TRIGGERED(VAL) (((VAL) & 0x300) == 0x200) + +/* + * PCI Interrupt Vector Values. + */ +#define PCIX_INT_VECTOR_BIT_F0 0x0080 +#define PCIX_INT_VECTOR_BIT_F1 0x0100 +#define PCIX_INT_VECTOR_BIT_F2 0x0200 +#define PCIX_INT_VECTOR_BIT_F3 0x0400 +#define PCIX_INT_VECTOR_BIT_F4 0x0800 +#define PCIX_INT_VECTOR_BIT_F5 0x1000 +#define PCIX_INT_VECTOR_BIT_F6 0x2000 +#define PCIX_INT_VECTOR_BIT_F7 0x4000 + +/* struct qla4_8xxx_legacy_intr_set defined in ql4_def.h */ + +#define QLA82XX_LEGACY_INTR_CONFIG \ +{ \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F0, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(0) }, \ + \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F1, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS_F1, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK_F1, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(1) }, \ + \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F2, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS_F2, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK_F2, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(2) }, \ + \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F3, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS_F3, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK_F3, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(3) }, \ + \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F4, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS_F4, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK_F4, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(4) }, \ + \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F5, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS_F5, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK_F5, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(5) }, \ + \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F6, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS_F6, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK_F6, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(6) }, \ + \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F7, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS_F7, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK_F7, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(7) }, \ +} + +/* Magic number to let user know flash is programmed */ +#define QLA82XX_BDINFO_MAGIC 0x12345678 +#define FW_SIZE_OFFSET (0x3e840c) + +/* QLA82XX additions */ +#define MIU_TEST_AGT_WRDATA_UPPER_LO (0x0b0) +#define MIU_TEST_AGT_WRDATA_UPPER_HI (0x0b4) + +#endif diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 38b1d38afca562c0ec7fe2d376e02ab41555dc11..64a1288e06b477c971d49752ce1a3a9027b63bc4 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -30,22 +30,29 @@ static struct kmem_cache *srb_cachep; * Module parameter information and variables */ int ql4xdiscoverywait = 60; -module_param(ql4xdiscoverywait, int, S_IRUGO | S_IRUSR); +module_param(ql4xdiscoverywait, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xdiscoverywait, "Discovery wait time"); + int ql4xdontresethba = 0; -module_param(ql4xdontresethba, int, S_IRUGO | S_IRUSR); +module_param(ql4xdontresethba, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xdontresethba, - "Dont reset the HBA when the driver gets 0x8002 AEN " - " default it will reset hba :0" - " set to 1 to avoid resetting HBA"); + "Don't reset the HBA for driver recovery \n" + " 0 - It will reset HBA (Default)\n" + " 1 - It will NOT reset HBA"); int ql4xextended_error_logging = 0; /* 0 = off, 1 = log errors */ -module_param(ql4xextended_error_logging, int, S_IRUGO | S_IRUSR); +module_param(ql4xextended_error_logging, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xextended_error_logging, "Option to enable extended error logging, " "Default is 0 - no logging, 1 - debug logging"); -int ql4_mod_unload = 0; +int ql4xenablemsix = 1; +module_param(ql4xenablemsix, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(ql4xenablemsix, + "Set to enable MSI or MSI-X interrupt mechanism.\n" + " 0 = enable INTx interrupt mechanism.\n" + " 1 = enable MSI-X interrupt mechanism (Default).\n" + " 2 = enable MSI interrupt mechanism."); #define QL4_DEF_QDEPTH 32 @@ -83,6 +90,9 @@ static int qla4xxx_slave_configure(struct scsi_device *device); static void qla4xxx_slave_destroy(struct scsi_device *sdev); static void qla4xxx_scan_start(struct Scsi_Host *shost); +static struct qla4_8xxx_legacy_intr_set legacy_intr[] = + QLA82XX_LEGACY_INTR_CONFIG; + static struct scsi_host_template qla4xxx_driver_template = { .module = THIS_MODULE, .name = DRIVER_NAME, @@ -152,15 +162,12 @@ static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session) if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE) { atomic_set(&ddb_entry->state, DDB_STATE_DEAD); - DEBUG2(printk("scsi%ld: %s: index [%d] port down retry count " + DEBUG2(printk("scsi%ld: %s: ddb [%d] port down retry count " "of (%d) secs exhausted, marking device DEAD.\n", ha->host_no, __func__, ddb_entry->fw_ddb_index, ha->port_down_retry_count)); - DEBUG2(printk("scsi%ld: %s: scheduling dpc routine - dpc " - "flags = 0x%lx\n", - ha->host_no, __func__, ha->dpc_flags)); - queue_work(ha->dpc_thread, &ha->dpc_work); + qla4xxx_wake_dpc(ha); } } @@ -362,19 +369,37 @@ static void qla4xxx_stop_timer(struct scsi_qla_host *ha) * @ha: Pointer to host adapter structure. * @ddb_entry: Pointer to device database entry * - * This routine marks a device missing and resets the relogin retry count. + * This routine marks a device missing and close connection. **/ void qla4xxx_mark_device_missing(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry) { - atomic_set(&ddb_entry->state, DDB_STATE_MISSING); - DEBUG3(printk("scsi%d:%d:%d: index [%d] marked MISSING\n", - ha->host_no, ddb_entry->bus, ddb_entry->target, - ddb_entry->fw_ddb_index)); + if ((atomic_read(&ddb_entry->state) != DDB_STATE_DEAD)) { + atomic_set(&ddb_entry->state, DDB_STATE_MISSING); + DEBUG2(printk("scsi%ld: ddb [%d] marked MISSING\n", + ha->host_no, ddb_entry->fw_ddb_index)); + } else + DEBUG2(printk("scsi%ld: ddb [%d] DEAD\n", ha->host_no, + ddb_entry->fw_ddb_index)) + iscsi_block_session(ddb_entry->sess); iscsi_conn_error_event(ddb_entry->conn, ISCSI_ERR_CONN_FAILED); } +/** + * qla4xxx_mark_all_devices_missing - mark all devices as missing. + * @ha: Pointer to host adapter structure. + * + * This routine marks a device missing and resets the relogin retry count. + **/ +void qla4xxx_mark_all_devices_missing(struct scsi_qla_host *ha) +{ + struct ddb_entry *ddb_entry, *ddbtemp; + list_for_each_entry_safe(ddb_entry, ddbtemp, &ha->ddb_list, list) { + qla4xxx_mark_device_missing(ha, ddb_entry); + } +} + static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry, struct scsi_cmnd *cmd, @@ -463,7 +488,13 @@ static int qla4xxx_queuecommand(struct scsi_cmnd *cmd, return SCSI_MLQUEUE_TARGET_BUSY; } - if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) + if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) || + test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) || + test_bit(DPC_RESET_HA, &ha->dpc_flags) || + test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags) || + test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags) || + !test_bit(AF_ONLINE, &ha->flags) || + test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags)) goto qc_host_busy; spin_unlock_irq(ha->host->host_lock); @@ -524,7 +555,15 @@ static void qla4xxx_mem_free(struct scsi_qla_host *ha) ha->srb_mempool = NULL; /* release io space registers */ - if (ha->reg) + if (is_qla8022(ha)) { + if (ha->nx_pcibase) + iounmap( + (struct device_reg_82xx __iomem *)ha->nx_pcibase); + + if (ha->nx_db_wr_ptr) + iounmap( + (struct device_reg_82xx __iomem *)ha->nx_db_wr_ptr); + } else if (ha->reg) iounmap(ha->reg); pci_release_regions(ha->pdev); } @@ -599,6 +638,74 @@ static int qla4xxx_mem_alloc(struct scsi_qla_host *ha) return QLA_ERROR; } +/** + * qla4_8xxx_check_fw_alive - Check firmware health + * @ha: Pointer to host adapter structure. + * + * Context: Interrupt + **/ +static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha) +{ + uint32_t fw_heartbeat_counter, halt_status; + + fw_heartbeat_counter = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER); + + if (ha->fw_heartbeat_counter == fw_heartbeat_counter) { + ha->seconds_since_last_heartbeat++; + /* FW not alive after 2 seconds */ + if (ha->seconds_since_last_heartbeat == 2) { + ha->seconds_since_last_heartbeat = 0; + halt_status = qla4_8xxx_rd_32(ha, + QLA82XX_PEG_HALT_STATUS1); + /* Since we cannot change dev_state in interrupt + * context, set appropriate DPC flag then wakeup + * DPC */ + if (halt_status & HALT_STATUS_UNRECOVERABLE) + set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags); + else { + printk("scsi%ld: %s: detect abort needed!\n", + ha->host_no, __func__); + set_bit(DPC_RESET_HA, &ha->dpc_flags); + } + qla4xxx_wake_dpc(ha); + } + } + ha->fw_heartbeat_counter = fw_heartbeat_counter; +} + +/** + * qla4_8xxx_watchdog - Poll dev state + * @ha: Pointer to host adapter structure. + * + * Context: Interrupt + **/ +void qla4_8xxx_watchdog(struct scsi_qla_host *ha) +{ + uint32_t dev_state; + + dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE); + + /* don't poll if reset is going on */ + if (!test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags)) { + if (dev_state == QLA82XX_DEV_NEED_RESET && + !test_bit(DPC_RESET_HA, &ha->dpc_flags)) { + printk("scsi%ld: %s: HW State: NEED RESET!\n", + ha->host_no, __func__); + set_bit(DPC_RESET_HA, &ha->dpc_flags); + qla4xxx_wake_dpc(ha); + } else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT && + !test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags)) { + printk("scsi%ld: %s: HW State: NEED QUIES!\n", + ha->host_no, __func__); + set_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags); + qla4xxx_wake_dpc(ha); + } else { + /* Check firmware health */ + qla4_8xxx_check_fw_alive(ha); + } + } +} + /** * qla4xxx_timer - checks every second for work to do. * @ha: Pointer to host adapter structure. @@ -608,6 +715,16 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) struct ddb_entry *ddb_entry, *dtemp; int start_dpc = 0; + if (test_bit(AF_HBA_GOING_AWAY, &ha->flags)) { + DEBUG2(ql4_printk(KERN_INFO, ha, "%s exited. HBA GOING AWAY\n", + __func__)); + return; + } + + if (is_qla8022(ha)) { + qla4_8xxx_watchdog(ha); + } + /* Search for relogin's to time-out and port down retry. */ list_for_each_entry_safe(ddb_entry, dtemp, &ha->ddb_list, list) { /* Count down time between sending relogins */ @@ -624,7 +741,7 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags); set_bit(DF_RELOGIN, &ddb_entry->flags); - DEBUG2(printk("scsi%ld: %s: index [%d]" + DEBUG2(printk("scsi%ld: %s: ddb [%d]" " login device\n", ha->host_no, __func__, ddb_entry->fw_ddb_index)); @@ -647,7 +764,7 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) DDB_DS_SESSION_FAILED) { /* Reset retry relogin timer */ atomic_inc(&ddb_entry->relogin_retry_count); - DEBUG2(printk("scsi%ld: index[%d] relogin" + DEBUG2(printk("scsi%ld: ddb [%d] relogin" " timed out-retrying" " relogin (%d)\n", ha->host_no, @@ -656,7 +773,7 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) relogin_retry_count)) ); start_dpc++; - DEBUG(printk("scsi%ld:%d:%d: index [%d] " + DEBUG(printk("scsi%ld:%d:%d: ddb [%d] " "initate relogin after" " %d seconds\n", ha->host_no, ddb_entry->bus, @@ -671,31 +788,35 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) } } - /* Check for heartbeat interval. */ - if (ha->firmware_options & FWOPT_HEARTBEAT_ENABLE && - ha->heartbeat_interval != 0) { - ha->seconds_since_last_heartbeat++; - if (ha->seconds_since_last_heartbeat > - ha->heartbeat_interval + 2) - set_bit(DPC_RESET_HA, &ha->dpc_flags); + if (!is_qla8022(ha)) { + /* Check for heartbeat interval. */ + if (ha->firmware_options & FWOPT_HEARTBEAT_ENABLE && + ha->heartbeat_interval != 0) { + ha->seconds_since_last_heartbeat++; + if (ha->seconds_since_last_heartbeat > + ha->heartbeat_interval + 2) + set_bit(DPC_RESET_HA, &ha->dpc_flags); + } } - /* Wakeup the dpc routine for this adapter, if needed. */ if ((start_dpc || test_bit(DPC_RESET_HA, &ha->dpc_flags) || test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags) || test_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags) || - test_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags) || + test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags) || test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) || test_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags) || test_bit(DPC_LINK_CHANGED, &ha->dpc_flags) || + test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags) || + test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags) || test_bit(DPC_AEN, &ha->dpc_flags)) && + !test_bit(AF_DPC_SCHEDULED, &ha->flags) && ha->dpc_thread) { DEBUG2(printk("scsi%ld: %s: scheduling dpc routine" " - dpc flags = 0x%lx\n", ha->host_no, __func__, ha->dpc_flags)); - queue_work(ha->dpc_thread, &ha->dpc_work); + qla4xxx_wake_dpc(ha); } /* Reschedule timer thread to call us back in one second */ @@ -714,16 +835,15 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) static int qla4xxx_cmd_wait(struct scsi_qla_host *ha) { uint32_t index = 0; - int stat = QLA_SUCCESS; unsigned long flags; struct scsi_cmnd *cmd; - int wait_cnt = WAIT_CMD_TOV; /* - * Initialized for 30 seconds as we - * expect all commands to retuned - * ASAP. - */ - while (wait_cnt) { + unsigned long wtime = jiffies + (WAIT_CMD_TOV * HZ); + + DEBUG2(ql4_printk(KERN_INFO, ha, "Wait up to %d seconds for cmds to " + "complete\n", WAIT_CMD_TOV)); + + while (!time_after_eq(jiffies, wtime)) { spin_lock_irqsave(&ha->hardware_lock, flags); /* Find a command that hasn't completed. */ for (index = 0; index < ha->host->can_queue; index++) { @@ -734,31 +854,26 @@ static int qla4xxx_cmd_wait(struct scsi_qla_host *ha) spin_unlock_irqrestore(&ha->hardware_lock, flags); /* If No Commands are pending, wait is complete */ - if (index == ha->host->can_queue) { - break; - } - - /* If we timed out on waiting for commands to come back - * return ERROR. - */ - wait_cnt--; - if (wait_cnt == 0) - stat = QLA_ERROR; - else { - msleep(1000); - } - } /* End of While (wait_cnt) */ + if (index == ha->host->can_queue) + return QLA_SUCCESS; - return stat; + msleep(1000); + } + /* If we timed out on waiting for commands to come back + * return ERROR. */ + return QLA_ERROR; } -void qla4xxx_hw_reset(struct scsi_qla_host *ha) +int qla4xxx_hw_reset(struct scsi_qla_host *ha) { uint32_t ctrl_status; unsigned long flags = 0; DEBUG2(printk(KERN_ERR "scsi%ld: %s\n", ha->host_no, __func__)); + if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS) + return QLA_ERROR; + spin_lock_irqsave(&ha->hardware_lock, flags); /* @@ -774,6 +889,7 @@ void qla4xxx_hw_reset(struct scsi_qla_host *ha) readl(&ha->reg->ctrl_status); spin_unlock_irqrestore(&ha->hardware_lock, flags); + return QLA_SUCCESS; } /** @@ -872,15 +988,16 @@ int qla4xxx_soft_reset(struct scsi_qla_host *ha) } /** - * qla4xxx_flush_active_srbs - returns all outstanding i/o requests to O.S. + * qla4xxx_abort_active_cmds - returns all outstanding i/o requests to O.S. * @ha: Pointer to host adapter structure. + * @res: returned scsi status * * This routine is called just prior to a HARD RESET to return all * outstanding commands back to the Operating System. * Caller should make sure that the following locks are released * before this calling routine: Hardware lock, and io_request_lock. **/ -static void qla4xxx_flush_active_srbs(struct scsi_qla_host *ha) +static void qla4xxx_abort_active_cmds(struct scsi_qla_host *ha, int res) { struct srb *srb; int i; @@ -890,74 +1007,116 @@ static void qla4xxx_flush_active_srbs(struct scsi_qla_host *ha) for (i = 0; i < ha->host->can_queue; i++) { srb = qla4xxx_del_from_active_array(ha, i); if (srb != NULL) { - srb->cmd->result = DID_RESET << 16; + srb->cmd->result = res; kref_put(&srb->srb_ref, qla4xxx_srb_compl); } } spin_unlock_irqrestore(&ha->hardware_lock, flags); } +void qla4xxx_dead_adapter_cleanup(struct scsi_qla_host *ha) +{ + clear_bit(AF_ONLINE, &ha->flags); + + /* Disable the board */ + ql4_printk(KERN_INFO, ha, "Disabling the board\n"); + set_bit(AF_HBA_GOING_AWAY, &ha->flags); + + qla4xxx_abort_active_cmds(ha, DID_NO_CONNECT << 16); + qla4xxx_mark_all_devices_missing(ha); + clear_bit(AF_INIT_DONE, &ha->flags); +} + /** * qla4xxx_recover_adapter - recovers adapter after a fatal error * @ha: Pointer to host adapter structure. - * @renew_ddb_list: Indicates what to do with the adapter's ddb list - * - * renew_ddb_list value can be 0=preserve ddb list, 1=destroy and rebuild - * ddb list. **/ -static int qla4xxx_recover_adapter(struct scsi_qla_host *ha, - uint8_t renew_ddb_list) +static int qla4xxx_recover_adapter(struct scsi_qla_host *ha) { - int status; + int status = QLA_ERROR; + uint8_t reset_chip = 0; /* Stall incoming I/O until we are done */ + scsi_block_requests(ha->host); clear_bit(AF_ONLINE, &ha->flags); - DEBUG2(printk("scsi%ld: %s calling qla4xxx_cmd_wait\n", ha->host_no, - __func__)); + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: adapter OFFLINE\n", __func__)); - /* Wait for outstanding commands to complete. - * Stalls the driver for max 30 secs - */ - status = qla4xxx_cmd_wait(ha); + set_bit(DPC_RESET_ACTIVE, &ha->dpc_flags); - qla4xxx_disable_intrs(ha); + if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) + reset_chip = 1; - /* Flush any pending ddb changed AENs */ - qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); + /* For the DPC_RESET_HA_INTR case (ISP-4xxx specific) + * do not reset adapter, jump to initialize_adapter */ + if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) { + status = QLA_SUCCESS; + goto recover_ha_init_adapter; + } - qla4xxx_flush_active_srbs(ha); + /* For the ISP-82xx adapter, issue a stop_firmware if invoked + * from eh_host_reset or ioctl module */ + if (is_qla8022(ha) && !reset_chip && + test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags)) { + + DEBUG2(ql4_printk(KERN_INFO, ha, + "scsi%ld: %s - Performing stop_firmware...\n", + ha->host_no, __func__)); + status = ha->isp_ops->reset_firmware(ha); + if (status == QLA_SUCCESS) { + qla4xxx_cmd_wait(ha); + ha->isp_ops->disable_intrs(ha); + qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); + qla4xxx_abort_active_cmds(ha, DID_RESET << 16); + } else { + /* If the stop_firmware fails then + * reset the entire chip */ + reset_chip = 1; + clear_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags); + set_bit(DPC_RESET_HA, &ha->dpc_flags); + } + } - /* Reset the firmware. If successful, function - * returns with ISP interrupts enabled. - */ - DEBUG2(printk("scsi%ld: %s - Performing soft reset..\n", - ha->host_no, __func__)); - if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS) - status = qla4xxx_soft_reset(ha); - else - status = QLA_ERROR; + /* Issue full chip reset if recovering from a catastrophic error, + * or if stop_firmware fails for ISP-82xx. + * This is the default case for ISP-4xxx */ + if (!is_qla8022(ha) || reset_chip) { + qla4xxx_cmd_wait(ha); + qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); + qla4xxx_abort_active_cmds(ha, DID_RESET << 16); + DEBUG2(ql4_printk(KERN_INFO, ha, + "scsi%ld: %s - Performing chip reset..\n", + ha->host_no, __func__)); + status = ha->isp_ops->reset_chip(ha); + } /* Flush any pending ddb changed AENs */ qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); - /* Re-initialize firmware. If successful, function returns - * with ISP interrupts enabled */ +recover_ha_init_adapter: + /* Upon successful firmware/chip reset, re-initialize the adapter */ if (status == QLA_SUCCESS) { - DEBUG2(printk("scsi%ld: %s - Initializing adapter..\n", - ha->host_no, __func__)); - - /* If successful, AF_ONLINE flag set in - * qla4xxx_initialize_adapter */ - status = qla4xxx_initialize_adapter(ha, renew_ddb_list); + /* For ISP-4xxx, force function 1 to always initialize + * before function 3 to prevent both funcions from + * stepping on top of the other */ + if (!is_qla8022(ha) && (ha->mac_index == 3)) + ssleep(6); + + /* NOTE: AF_ONLINE flag set upon successful completion of + * qla4xxx_initialize_adapter */ + status = qla4xxx_initialize_adapter(ha, PRESERVE_DDB_LIST); } - /* Failed adapter initialization? - * Retry reset_ha only if invoked via DPC (DPC_RESET_HA) */ - if ((test_bit(AF_ONLINE, &ha->flags) == 0) && - (test_bit(DPC_RESET_HA, &ha->dpc_flags))) { + /* Retry failed adapter initialization, if necessary + * Do not retry initialize_adapter for RESET_HA_INTR (ISP-4xxx specific) + * case to prevent ping-pong resets between functions */ + if (!test_bit(AF_ONLINE, &ha->flags) && + !test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) { /* Adapter initialization failed, see if we can retry - * resetting the ha */ + * resetting the ha. + * Since we don't want to block the DPC for too long + * with multiple resets in the same thread, + * utilize DPC to retry */ if (!test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags)) { ha->retry_reset_ha_cnt = MAX_RESET_HA_RETRIES; DEBUG2(printk("scsi%ld: recover adapter - retrying " @@ -982,29 +1141,43 @@ static int qla4xxx_recover_adapter(struct scsi_qla_host *ha, DEBUG2(printk("scsi%ld: recover adapter " "failed - board disabled\n", ha->host_no)); - qla4xxx_flush_active_srbs(ha); + qla4xxx_dead_adapter_cleanup(ha); clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags); clear_bit(DPC_RESET_HA, &ha->dpc_flags); - clear_bit(DPC_RESET_HA_DESTROY_DDB_LIST, + clear_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags); status = QLA_ERROR; } } } else { clear_bit(DPC_RESET_HA, &ha->dpc_flags); - clear_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags); + clear_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags); clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags); } ha->adapter_error_count++; - if (status == QLA_SUCCESS) - qla4xxx_enable_intrs(ha); + if (test_bit(AF_ONLINE, &ha->flags)) + ha->isp_ops->enable_intrs(ha); + + scsi_unblock_requests(ha->host); + + clear_bit(DPC_RESET_ACTIVE, &ha->dpc_flags); + DEBUG2(printk("scsi%ld: recover adapter: %s\n", ha->host_no, + status == QLA_ERROR ? "FAILED" : "SUCCEDED")); - DEBUG2(printk("scsi%ld: recover adapter .. DONE\n", ha->host_no)); return status; } +void qla4xxx_wake_dpc(struct scsi_qla_host *ha) +{ + if (ha->dpc_thread && + !test_bit(AF_DPC_SCHEDULED, &ha->flags)) { + set_bit(AF_DPC_SCHEDULED, &ha->flags); + queue_work(ha->dpc_thread, &ha->dpc_work); + } +} + /** * qla4xxx_do_dpc - dpc routine * @data: in our case pointer to adapter structure @@ -1024,21 +1197,47 @@ static void qla4xxx_do_dpc(struct work_struct *work) int status = QLA_ERROR; DEBUG2(printk("scsi%ld: %s: DPC handler waking up." - "flags = 0x%08lx, dpc_flags = 0x%08lx ctrl_stat = 0x%08x\n", - ha->host_no, __func__, ha->flags, ha->dpc_flags, - readw(&ha->reg->ctrl_status))); + "flags = 0x%08lx, dpc_flags = 0x%08lx\n", + ha->host_no, __func__, ha->flags, ha->dpc_flags)) /* Initialization not yet finished. Don't do anything yet. */ if (!test_bit(AF_INIT_DONE, &ha->flags)) return; - if (adapter_up(ha) || - test_bit(DPC_RESET_HA, &ha->dpc_flags) || + /* HBA is in the process of being permanently disabled. + * Don't process anything */ + if (test_bit(AF_HBA_GOING_AWAY, &ha->flags)) + return; + + if (is_qla8022(ha)) { + if (test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags)) { + qla4_8xxx_idc_lock(ha); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, + QLA82XX_DEV_FAILED); + qla4_8xxx_idc_unlock(ha); + ql4_printk(KERN_INFO, ha, "HW State: FAILED\n"); + qla4_8xxx_device_state_handler(ha); + } + if (test_and_clear_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags)) { + qla4_8xxx_need_qsnt_handler(ha); + } + } + + if (!test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) && + (test_bit(DPC_RESET_HA, &ha->dpc_flags) || test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) || - test_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags)) { - if (test_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags) || - test_bit(DPC_RESET_HA, &ha->dpc_flags)) - qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST); + test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags))) { + if (ql4xdontresethba) { + DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n", + ha->host_no, __func__)); + clear_bit(DPC_RESET_HA, &ha->dpc_flags); + clear_bit(DPC_RESET_HA_INTR, &ha->dpc_flags); + clear_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags); + goto dpc_post_reset_ha; + } + if (test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags) || + test_bit(DPC_RESET_HA, &ha->dpc_flags)) + qla4xxx_recover_adapter(ha); if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) { uint8_t wait_time = RESET_INTR_TOV; @@ -1053,18 +1252,18 @@ static void qla4xxx_do_dpc(struct work_struct *work) DEBUG2(printk("scsi%ld: %s: SR|FSR " "bit not cleared-- resetting\n", ha->host_no, __func__)); - qla4xxx_flush_active_srbs(ha); + qla4xxx_abort_active_cmds(ha, DID_RESET << 16); if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS) { qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); - status = qla4xxx_initialize_adapter(ha, - PRESERVE_DDB_LIST); + status = qla4xxx_recover_adapter(ha); } clear_bit(DPC_RESET_HA_INTR, &ha->dpc_flags); if (status == QLA_SUCCESS) - qla4xxx_enable_intrs(ha); + ha->isp_ops->enable_intrs(ha); } } +dpc_post_reset_ha: /* ---- process AEN? --- */ if (test_and_clear_bit(DPC_AEN, &ha->dpc_flags)) qla4xxx_process_aen(ha, PROCESS_ALL_AENS); @@ -1104,11 +1303,9 @@ static void qla4xxx_do_dpc(struct work_struct *work) DDB_STATE_ONLINE); dev_info(&ha->pdev->dev, "scsi%ld: %s: ddb[%d]" - " os[%d] marked" - " ONLINE\n", + " marked ONLINE\n", ha->host_no, __func__, - ddb_entry->fw_ddb_index, - ddb_entry->os_target_id); + ddb_entry->fw_ddb_index); iscsi_unblock_session( ddb_entry->sess); @@ -1144,6 +1341,7 @@ static void qla4xxx_do_dpc(struct work_struct *work) } } } + clear_bit(AF_DPC_SCHEDULED, &ha->flags); } /** @@ -1155,30 +1353,99 @@ static void qla4xxx_free_adapter(struct scsi_qla_host *ha) if (test_bit(AF_INTERRUPTS_ON, &ha->flags)) { /* Turn-off interrupts on the card. */ - qla4xxx_disable_intrs(ha); + ha->isp_ops->disable_intrs(ha); } + /* Remove timer thread, if present */ + if (ha->timer_active) + qla4xxx_stop_timer(ha); + /* Kill the kernel thread for this host */ if (ha->dpc_thread) destroy_workqueue(ha->dpc_thread); - /* Issue Soft Reset to put firmware in unknown state */ - if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS) - qla4xxx_hw_reset(ha); + /* Put firmware in known state */ + ha->isp_ops->reset_firmware(ha); - /* Remove timer thread, if present */ - if (ha->timer_active) - qla4xxx_stop_timer(ha); + if (is_qla8022(ha)) { + qla4_8xxx_idc_lock(ha); + qla4_8xxx_clear_drv_active(ha); + qla4_8xxx_idc_unlock(ha); + } /* Detach interrupts */ if (test_and_clear_bit(AF_IRQ_ATTACHED, &ha->flags)) - free_irq(ha->pdev->irq, ha); + qla4xxx_free_irqs(ha); /* free extra memory */ qla4xxx_mem_free(ha); +} + +int qla4_8xxx_iospace_config(struct scsi_qla_host *ha) +{ + int status = 0; + uint8_t revision_id; + unsigned long mem_base, mem_len, db_base, db_len; + struct pci_dev *pdev = ha->pdev; + + status = pci_request_regions(pdev, DRIVER_NAME); + if (status) { + printk(KERN_WARNING + "scsi(%ld) Failed to reserve PIO regions (%s) " + "status=%d\n", ha->host_no, pci_name(pdev), status); + goto iospace_error_exit; + } + + pci_read_config_byte(pdev, PCI_REVISION_ID, &revision_id); + DEBUG2(printk(KERN_INFO "%s: revision-id=%d\n", + __func__, revision_id)); + ha->revision_id = revision_id; - pci_disable_device(ha->pdev); + /* remap phys address */ + mem_base = pci_resource_start(pdev, 0); /* 0 is for BAR 0 */ + mem_len = pci_resource_len(pdev, 0); + DEBUG2(printk(KERN_INFO "%s: ioremap from %lx a size of %lx\n", + __func__, mem_base, mem_len)); + /* mapping of pcibase pointer */ + ha->nx_pcibase = (unsigned long)ioremap(mem_base, mem_len); + if (!ha->nx_pcibase) { + printk(KERN_ERR + "cannot remap MMIO (%s), aborting\n", pci_name(pdev)); + pci_release_regions(ha->pdev); + goto iospace_error_exit; + } + + /* Mapping of IO base pointer, door bell read and write pointer */ + + /* mapping of IO base pointer */ + ha->qla4_8xxx_reg = + (struct device_reg_82xx __iomem *)((uint8_t *)ha->nx_pcibase + + 0xbc000 + (ha->pdev->devfn << 11)); + + db_base = pci_resource_start(pdev, 4); /* doorbell is on bar 4 */ + db_len = pci_resource_len(pdev, 4); + + /* mapping of doorbell write pointer */ + ha->nx_db_wr_ptr = (unsigned long)ioremap(db_base + + (ha->pdev->devfn << 12), 4); + if (!ha->nx_db_wr_ptr) { + printk(KERN_ERR + "cannot remap MMIO doorbell-write (%s), aborting\n", + pci_name(pdev)); + goto iospace_error_exit; + } + /* mapping of doorbell read pointer */ + ha->nx_db_rd_ptr = (uint8_t *) ha->nx_pcibase + (512 * 1024) + + (ha->pdev->devfn * 8); + if (!ha->nx_db_rd_ptr) + printk(KERN_ERR + "cannot remap MMIO doorbell-read (%s), aborting\n", + pci_name(pdev)); + return 0; + +iospace_error_exit: + return -ENOMEM; } /*** @@ -1188,7 +1455,7 @@ static void qla4xxx_free_adapter(struct scsi_qla_host *ha) * This routines maps HBA's registers from the pci address space * into the kernel virtual address space for memory mapped i/o. **/ -static int qla4xxx_iospace_config(struct scsi_qla_host *ha) +int qla4xxx_iospace_config(struct scsi_qla_host *ha) { unsigned long pio, pio_len, pio_flags; unsigned long mmio, mmio_len, mmio_flags; @@ -1247,6 +1514,60 @@ static int qla4xxx_iospace_config(struct scsi_qla_host *ha) return -ENOMEM; } +static struct isp_operations qla4xxx_isp_ops = { + .iospace_config = qla4xxx_iospace_config, + .pci_config = qla4xxx_pci_config, + .disable_intrs = qla4xxx_disable_intrs, + .enable_intrs = qla4xxx_enable_intrs, + .start_firmware = qla4xxx_start_firmware, + .intr_handler = qla4xxx_intr_handler, + .interrupt_service_routine = qla4xxx_interrupt_service_routine, + .reset_chip = qla4xxx_soft_reset, + .reset_firmware = qla4xxx_hw_reset, + .queue_iocb = qla4xxx_queue_iocb, + .complete_iocb = qla4xxx_complete_iocb, + .rd_shdw_req_q_out = qla4xxx_rd_shdw_req_q_out, + .rd_shdw_rsp_q_in = qla4xxx_rd_shdw_rsp_q_in, + .get_sys_info = qla4xxx_get_sys_info, +}; + +static struct isp_operations qla4_8xxx_isp_ops = { + .iospace_config = qla4_8xxx_iospace_config, + .pci_config = qla4_8xxx_pci_config, + .disable_intrs = qla4_8xxx_disable_intrs, + .enable_intrs = qla4_8xxx_enable_intrs, + .start_firmware = qla4_8xxx_load_risc, + .intr_handler = qla4_8xxx_intr_handler, + .interrupt_service_routine = qla4_8xxx_interrupt_service_routine, + .reset_chip = qla4_8xxx_isp_reset, + .reset_firmware = qla4_8xxx_stop_firmware, + .queue_iocb = qla4_8xxx_queue_iocb, + .complete_iocb = qla4_8xxx_complete_iocb, + .rd_shdw_req_q_out = qla4_8xxx_rd_shdw_req_q_out, + .rd_shdw_rsp_q_in = qla4_8xxx_rd_shdw_rsp_q_in, + .get_sys_info = qla4_8xxx_get_sys_info, +}; + +uint16_t qla4xxx_rd_shdw_req_q_out(struct scsi_qla_host *ha) +{ + return (uint16_t)le32_to_cpu(ha->shadow_regs->req_q_out); +} + +uint16_t qla4_8xxx_rd_shdw_req_q_out(struct scsi_qla_host *ha) +{ + return (uint16_t)le32_to_cpu(readl(&ha->qla4_8xxx_reg->req_q_out)); +} + +uint16_t qla4xxx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha) +{ + return (uint16_t)le32_to_cpu(ha->shadow_regs->rsp_q_in); +} + +uint16_t qla4_8xxx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha) +{ + return (uint16_t)le32_to_cpu(readl(&ha->qla4_8xxx_reg->rsp_q_in)); +} + /** * qla4xxx_probe_adapter - callback function to probe HBA * @pdev: pointer to pci_dev structure @@ -1264,6 +1585,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, struct scsi_qla_host *ha; uint8_t init_retry_count = 0; char buf[34]; + struct qla4_8xxx_legacy_intr_set *nx_legacy_intr; if (pci_enable_device(pdev)) return -1; @@ -1284,10 +1606,28 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, ha->host = host; ha->host_no = host->host_no; + /* Setup Runtime configurable options */ + if (is_qla8022(ha)) { + ha->isp_ops = &qla4_8xxx_isp_ops; + rwlock_init(&ha->hw_lock); + ha->qdr_sn_window = -1; + ha->ddr_mn_window = -1; + ha->curr_window = 255; + ha->func_num = PCI_FUNC(ha->pdev->devfn); + nx_legacy_intr = &legacy_intr[ha->func_num]; + ha->nx_legacy_intr.int_vec_bit = nx_legacy_intr->int_vec_bit; + ha->nx_legacy_intr.tgt_status_reg = + nx_legacy_intr->tgt_status_reg; + ha->nx_legacy_intr.tgt_mask_reg = nx_legacy_intr->tgt_mask_reg; + ha->nx_legacy_intr.pci_int_reg = nx_legacy_intr->pci_int_reg; + } else { + ha->isp_ops = &qla4xxx_isp_ops; + } + /* Configure PCI I/O space. */ - ret = qla4xxx_iospace_config(ha); + ret = ha->isp_ops->iospace_config(ha); if (ret) - goto probe_failed; + goto probe_failed_ioconfig; dev_info(&ha->pdev->dev, "Found an ISP%04x, irq %d, iobase 0x%p\n", pdev->device, pdev->irq, ha->reg); @@ -1299,6 +1639,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, INIT_LIST_HEAD(&ha->free_srb_q); mutex_init(&ha->mbox_sem); + init_completion(&ha->mbx_intr_comp); spin_lock_init(&ha->hardware_lock); @@ -1311,19 +1652,27 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, goto probe_failed; } + if (is_qla8022(ha)) + (void) qla4_8xxx_get_flash_info(ha); + /* * Initialize the Host adapter request/response queues and * firmware * NOTE: interrupts enabled upon successful completion */ status = qla4xxx_initialize_adapter(ha, REBUILD_DDB_LIST); - while (status == QLA_ERROR && init_retry_count++ < MAX_INIT_RETRIES) { + while ((!test_bit(AF_ONLINE, &ha->flags)) && + init_retry_count++ < MAX_INIT_RETRIES) { DEBUG2(printk("scsi: %s: retrying adapter initialization " "(%d)\n", __func__, init_retry_count)); - qla4xxx_soft_reset(ha); + + if (ha->isp_ops->reset_chip(ha) == QLA_ERROR) + continue; + status = qla4xxx_initialize_adapter(ha, REBUILD_DDB_LIST); } - if (status == QLA_ERROR) { + + if (!test_bit(AF_ONLINE, &ha->flags)) { dev_warn(&ha->pdev->dev, "Failed to initialize adapter\n"); ret = -ENODEV; @@ -1356,18 +1705,21 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, } INIT_WORK(&ha->dpc_work, qla4xxx_do_dpc); - ret = request_irq(pdev->irq, qla4xxx_intr_handler, - IRQF_DISABLED | IRQF_SHARED, "qla4xxx", ha); - if (ret) { - dev_warn(&ha->pdev->dev, "Failed to reserve interrupt %d" - " already in use.\n", pdev->irq); - goto probe_failed; + /* For ISP-82XX, request_irqs is called in qla4_8xxx_load_risc + * (which is called indirectly by qla4xxx_initialize_adapter), + * so that irqs will be registered after crbinit but before + * mbx_intr_enable. + */ + if (!is_qla8022(ha)) { + ret = qla4xxx_request_irqs(ha); + if (ret) { + ql4_printk(KERN_WARNING, ha, "Failed to reserve " + "interrupt %d already in use.\n", pdev->irq); + goto probe_failed; + } } - set_bit(AF_IRQ_ATTACHED, &ha->flags); - host->irq = pdev->irq; - DEBUG(printk("scsi%d: irq %d attached\n", ha->host_no, ha->pdev->irq)); - qla4xxx_enable_intrs(ha); + ha->isp_ops->enable_intrs(ha); /* Start timer thread. */ qla4xxx_start_timer(ha, qla4xxx_timer, 1); @@ -1391,6 +1743,8 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, probe_failed: qla4xxx_free_adapter(ha); + +probe_failed_ioconfig: scsi_host_put(ha->host); probe_disable_device: @@ -1409,10 +1763,7 @@ static void __devexit qla4xxx_remove_adapter(struct pci_dev *pdev) ha = pci_get_drvdata(pdev); - qla4xxx_disable_intrs(ha); - - while (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) - ssleep(1); + set_bit(AF_HBA_GOING_AWAY, &ha->flags); /* remove devs from iscsi_sessions to scsi_devices */ qla4xxx_free_ddb_list(ha); @@ -1423,6 +1774,7 @@ static void __devexit qla4xxx_remove_adapter(struct pci_dev *pdev) scsi_host_put(ha->host); + pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); } @@ -1479,7 +1831,8 @@ static void qla4xxx_slave_destroy(struct scsi_device *sdev) * * This routine removes and returns the srb at the specified index **/ -struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t index) +struct srb *qla4xxx_del_from_active_array(struct scsi_qla_host *ha, + uint32_t index) { struct srb *srb = NULL; struct scsi_cmnd *cmd = NULL; @@ -1769,6 +2122,12 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd) ha = (struct scsi_qla_host *) cmd->device->host->hostdata; + if (ql4xdontresethba) { + DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n", + ha->host_no, __func__)); + return FAILED; + } + dev_info(&ha->pdev->dev, "scsi(%ld:%d:%d:%d): HOST RESET ISSUED.\n", ha->host_no, cmd->device->channel, cmd->device->id, cmd->device->lun); @@ -1781,11 +2140,14 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd) return FAILED; } - /* make sure the dpc thread is stopped while we reset the hba */ - clear_bit(AF_ONLINE, &ha->flags); - flush_workqueue(ha->dpc_thread); + if (!test_bit(DPC_RESET_HA, &ha->dpc_flags)) { + if (is_qla8022(ha)) + set_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags); + else + set_bit(DPC_RESET_HA, &ha->dpc_flags); + } - if (qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST) == QLA_SUCCESS) + if (qla4xxx_recover_adapter(ha) == QLA_SUCCESS) return_status = SUCCESS; dev_info(&ha->pdev->dev, "HOST RESET %s.\n", @@ -1794,7 +2156,6 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd) return return_status; } - static struct pci_device_id qla4xxx_pci_tbl[] = { { .vendor = PCI_VENDOR_ID_QLOGIC, @@ -1814,6 +2175,12 @@ static struct pci_device_id qla4xxx_pci_tbl[] = { .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, }, + { + .vendor = PCI_VENDOR_ID_QLOGIC, + .device = PCI_DEVICE_ID_QLOGIC_ISP8022, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, {0, 0}, }; MODULE_DEVICE_TABLE(pci, qla4xxx_pci_tbl); @@ -1869,7 +2236,6 @@ static int __init qla4xxx_module_init(void) static void __exit qla4xxx_module_exit(void) { - ql4_mod_unload = 1; pci_unregister_driver(&qla4xxx_pci_driver); iscsi_unregister_transport(&qla4xxx_iscsi_transport); kmem_cache_destroy(srb_cachep);