diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 1213e1932ccb5edf3c423299594ad277a10ea31c..24d584a1c9a78fc333b1b46b33d640c7041aebc1 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -65,6 +65,9 @@ struct i2c_ram {
 	char    res1[4];	/* Reserved */
 	ushort  rpbase;		/* Relocation pointer */
 	char    res2[2];	/* Reserved */
+	/* The following elements are only for CPM2 */
+	char    res3[4];	/* Reserved */
+	uint    sdmatmp;	/* Internal */
 };
 
 #define I2COM_START	0x80
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index ebb4c0b03057de4811440a8c09bcb45d5ee1055c..bffca729e1c75d1473b50e03d0b3810a3c3bc141 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1917,6 +1917,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	pci_set_drvdata(dev, priv);
 
+	dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 	pm_runtime_set_autosuspend_delay(&dev->dev, 1000);
 	pm_runtime_use_autosuspend(&dev->dev);
 	pm_runtime_put_autosuspend(&dev->dev);
diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
index dfcf04e1967f1743db35b82a7c62532a1d57ac36..2ad166355ec9b06b9528bc35018f77a28b6b87b0 100644
--- a/drivers/i2c/busses/i2c-npcm7xx.c
+++ b/drivers/i2c/busses/i2c-npcm7xx.c
@@ -2163,6 +2163,15 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	if (bus->cmd_err == -EAGAIN)
 		ret = i2c_recover_bus(adap);
 
+	/*
+	 * After any type of error, check if LAST bit is still set,
+	 * due to a HW issue.
+	 * It cannot be cleared without resetting the module.
+	 */
+	if (bus->cmd_err &&
+	    (NPCM_I2CRXF_CTL_LAST_PEC & ioread8(bus->reg + NPCM_I2CRXF_CTL)))
+		npcm_i2c_reset(bus);
+
 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 	/* reenable slave if it was enabled */
 	if (bus->slave)