diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 36d34e5e5a5ac21530593130d499aa5d0d0ec153..435739d4b2977fef765bc4476b2c8cb1910f7934 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -1,5 +1,5 @@ # drivers/mtd/nand/Kconfig -# $Id: Kconfig,v 1.31 2005/06/20 12:03:21 bjd Exp $ +# $Id: Kconfig,v 1.34 2005/09/23 01:44:55 ppopov Exp $ menu "NAND Flash Device Drivers" depends on MTD!=n @@ -59,8 +59,8 @@ config MTD_NAND_IDS tristate config MTD_NAND_AU1550 - tristate "Au1550 NAND support" - depends on SOC_AU1550 && MTD_NAND + tristate "Au1550/1200 NAND support" + depends on (SOC_AU1200 || SOC_AU1550) && MTD_NAND help This enables the driver for the NAND flash controller on the AMD/Alchemy 1550 SOC. diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index 4c7719ce3f4835abc09a55a45cbb0c5473caf569..953daf379b9bb26ca560ae48b0e1008a4ba8e4a9 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -3,7 +3,7 @@ * * Copyright (C) 2004 Embedded Edge, LLC * - * $Id: au1550nd.c,v 1.11 2004/11/04 12:53:10 gleixner Exp $ + * $Id: au1550nd.c,v 1.12 2005/09/23 01:44:55 ppopov Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,13 +21,7 @@ /* fixme: this is ugly */ #if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 0) -#include -#ifdef CONFIG_MIPS_PB1550 -#include -#endif -#ifdef CONFIG_MIPS_DB1550 -#include -#endif +#include #else #include #ifdef CONFIG_MIPS_PB1550 @@ -45,39 +39,22 @@ static struct mtd_info *au1550_mtd = NULL; static void __iomem *p_nand; static int nand_width = 1; /* default x8*/ -#define NAND_CS 1 - /* * Define partitions for flash device */ const static struct mtd_partition partition_info[] = { -#ifdef CONFIG_MIPS_PB1550 -#define NUM_PARTITIONS 2 - { - .name = "Pb1550 NAND FS 0", - .offset = 0, - .size = 8*1024*1024 - }, - { - .name = "Pb1550 NAND FS 1", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL - } -#endif -#ifdef CONFIG_MIPS_DB1550 -#define NUM_PARTITIONS 2 { - .name = "Db1550 NAND FS 0", + .name = "NAND FS 0", .offset = 0, - .size = 8*1024*1024 + .size = 8*1024*1024 }, { - .name = "Db1550 NAND FS 1", + .name = "NAND FS 1", .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL + .size = MTDPART_SIZ_FULL } -#endif }; +#define NB_OF(x) (sizeof(x)/sizeof(x[0])) /** @@ -339,11 +316,13 @@ int au1550_device_ready(struct mtd_info *mtd) /* * Main initialization routine */ -int __init au1550_init (void) +int __init au1xxx_nand_init (void) { struct nand_chip *this; u16 boot_swapboot = 0; /* default value */ int retval; + u32 mem_staddr; + u32 nand_phys; /* Allocate memory for MTD device structure and private data */ au1550_mtd = kmalloc (sizeof(struct mtd_info) + @@ -364,8 +343,11 @@ int __init au1550_init (void) au1550_mtd->priv = this; - /* MEM_STNDCTL: disable ints, disable nand boot */ - au_writel(0, MEM_STNDCTL); + /* disable interrupts */ + au_writel(au_readl(MEM_STNDCTL) & ~(1<<8), MEM_STNDCTL); + + /* disable NAND boot */ + au_writel(au_readl(MEM_STNDCTL) & ~(1<<0), MEM_STNDCTL); #ifdef CONFIG_MIPS_PB1550 /* set gpio206 high */ @@ -397,19 +379,60 @@ int __init au1550_init (void) } #endif - /* Configure RCE1 - should be done by YAMON */ - au_writel(0x5 | (nand_width << 22), 0xB4001010); /* MEM_STCFG1 */ - au_writel(NAND_TIMING, 0xB4001014); /* MEM_STTIME1 */ - au_sync(); + /* Configure chip-select; normally done by boot code, e.g. YAMON */ +#ifdef NAND_STCFG + if (NAND_CS == 0) { + au_writel(NAND_STCFG, MEM_STCFG0); + au_writel(NAND_STTIME, MEM_STTIME0); + au_writel(NAND_STADDR, MEM_STADDR0); + } + if (NAND_CS == 1) { + au_writel(NAND_STCFG, MEM_STCFG1); + au_writel(NAND_STTIME, MEM_STTIME1); + au_writel(NAND_STADDR, MEM_STADDR1); + } + if (NAND_CS == 2) { + au_writel(NAND_STCFG, MEM_STCFG2); + au_writel(NAND_STTIME, MEM_STTIME2); + au_writel(NAND_STADDR, MEM_STADDR2); + } + if (NAND_CS == 3) { + au_writel(NAND_STCFG, MEM_STCFG3); + au_writel(NAND_STTIME, MEM_STTIME3); + au_writel(NAND_STADDR, MEM_STADDR3); + } +#endif + + /* Locate NAND chip-select in order to determine NAND phys address */ + mem_staddr = 0x00000000; + if (((au_readl(MEM_STCFG0) & 0x7) == 0x5) && (NAND_CS == 0)) + mem_staddr = au_readl(MEM_STADDR0); + else if (((au_readl(MEM_STCFG1) & 0x7) == 0x5) && (NAND_CS == 1)) + mem_staddr = au_readl(MEM_STADDR1); + else if (((au_readl(MEM_STCFG2) & 0x7) == 0x5) && (NAND_CS == 2)) + mem_staddr = au_readl(MEM_STADDR2); + else if (((au_readl(MEM_STCFG3) & 0x7) == 0x5) && (NAND_CS == 3)) + mem_staddr = au_readl(MEM_STADDR3); + + if (mem_staddr == 0x00000000) { + printk("Au1xxx NAND: ERROR WITH NAND CHIP-SELECT\n"); + kfree(au1550_mtd); + return 1; + } + nand_phys = (mem_staddr << 4) & 0xFFFC0000; - /* setup and enable chip select, MEM_STADDR1 */ - /* we really need to decode offsets only up till 0x20 */ - au_writel((1<<28) | (NAND_PHYS_ADDR>>4) | - (((NAND_PHYS_ADDR + 0x1000)-1) & (0x3fff<<18)>>18), - MEM_STADDR1); - au_sync(); + p_nand = (void __iomem *)ioremap(nand_phys, 0x1000); + + /* make controller and MTD agree */ + if (NAND_CS == 0) + nand_width = au_readl(MEM_STCFG0) & (1<<22); + if (NAND_CS == 1) + nand_width = au_readl(MEM_STCFG1) & (1<<22); + if (NAND_CS == 2) + nand_width = au_readl(MEM_STCFG2) & (1<<22); + if (NAND_CS == 3) + nand_width = au_readl(MEM_STCFG3) & (1<<22); - p_nand = ioremap(NAND_PHYS_ADDR, 0x1000); /* Set address of hardware control function */ this->hwcontrol = au1550_hwcontrol; @@ -438,7 +461,7 @@ int __init au1550_init (void) } /* Register the partitions */ - add_mtd_partitions(au1550_mtd, partition_info, NUM_PARTITIONS); + add_mtd_partitions(au1550_mtd, partition_info, NB_OF(partition_info)); return 0; @@ -450,7 +473,7 @@ int __init au1550_init (void) return retval; } -module_init(au1550_init); +module_init(au1xxx_nand_init); /* * Clean up routine