coresight: etm4x: Cleanup TRCEVENTCTL1R register accesses

This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: NJames Clark <james.clark@arm.com>
Reviewed-by: NMike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-8-james.clark@arm.comSigned-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>

drivers/hwtracing/coresight/coresight-etm4x-sysfs.c

@@ -384,16 +384,16 @@ static ssize_t mode_store(struct device *dev,
 	/* bit[11], AMBA Trace Bus (ATB) trigger enable bit */
 	if ((config->mode & ETM_MODE_ATB_TRIGGER) &&
 	    (drvdata->atbtrig == true))
-		config->eventctrl1 |= BIT(11);
+		config->eventctrl1 |= TRCEVENTCTL1R_ATB;
 	else
-		config->eventctrl1 &= ~BIT(11);
+		config->eventctrl1 &= ~TRCEVENTCTL1R_ATB;
 
 	/* bit[12], Low-power state behavior override bit */
 	if ((config->mode & ETM_MODE_LPOVERRIDE) &&
 	    (drvdata->lpoverride == true))
-		config->eventctrl1 |= BIT(12);
+		config->eventctrl1 |= TRCEVENTCTL1R_LPOVERRIDE;
 	else
-		config->eventctrl1 &= ~BIT(12);
+		config->eventctrl1 &= ~TRCEVENTCTL1R_LPOVERRIDE;
 
 	/* bit[8], Instruction stall bit */
 	if ((config->mode & ETM_MODE_ISTALL_EN) && (drvdata->stallctl == true))
@@ -534,7 +534,7 @@ static ssize_t event_instren_show(struct device *dev,
 	struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
 	struct etmv4_config *config = &drvdata->config;
 
-	val = BMVAL(config->eventctrl1, 0, 3);
+	val = FIELD_GET(TRCEVENTCTL1R_INSTEN_MASK, config->eventctrl1);
 	return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
 }
 
@@ -551,23 +551,28 @@ static ssize_t event_instren_store(struct device *dev,
 
 	spin_lock(&drvdata->spinlock);
 	/* start by clearing all instruction event enable bits */
-	config->eventctrl1 &= ~(BIT(0) | BIT(1) | BIT(2) | BIT(3));
+	config->eventctrl1 &= ~TRCEVENTCTL1R_INSTEN_MASK;
 	switch (drvdata->nr_event) {
 	case 0x0:
 		/* generate Event element for event 1 */
-		config->eventctrl1 |= val & BIT(1);
+		config->eventctrl1 |= val & TRCEVENTCTL1R_INSTEN_1;
 		break;
 	case 0x1:
 		/* generate Event element for event 1 and 2 */
-		config->eventctrl1 |= val & (BIT(0) | BIT(1));
+		config->eventctrl1 |= val & (TRCEVENTCTL1R_INSTEN_0 | TRCEVENTCTL1R_INSTEN_1);
 		break;
 	case 0x2:
 		/* generate Event element for event 1, 2 and 3 */
-		config->eventctrl1 |= val & (BIT(0) | BIT(1) | BIT(2));
+		config->eventctrl1 |= val & (TRCEVENTCTL1R_INSTEN_0 |
+					     TRCEVENTCTL1R_INSTEN_1 |
+					     TRCEVENTCTL1R_INSTEN_2);
 		break;
 	case 0x3:
 		/* generate Event element for all 4 events */
-		config->eventctrl1 |= val & 0xF;
+		config->eventctrl1 |= val & (TRCEVENTCTL1R_INSTEN_0 |
+					     TRCEVENTCTL1R_INSTEN_1 |
+					     TRCEVENTCTL1R_INSTEN_2 |
+					     TRCEVENTCTL1R_INSTEN_3);
 		break;
 	default:
 		break;

drivers/hwtracing/coresight/coresight-etm4x.h

@@ -188,6 +188,14 @@
 #define TRCCONFIGR_DA				BIT(16)
 #define TRCCONFIGR_DV				BIT(17)
 
+#define TRCEVENTCTL1R_INSTEN_MASK		GENMASK(3, 0)
+#define TRCEVENTCTL1R_INSTEN_0			BIT(0)
+#define TRCEVENTCTL1R_INSTEN_1			BIT(1)
+#define TRCEVENTCTL1R_INSTEN_2			BIT(2)
+#define TRCEVENTCTL1R_INSTEN_3			BIT(3)
+#define TRCEVENTCTL1R_ATB			BIT(11)
+#define TRCEVENTCTL1R_LPOVERRIDE		BIT(12)
+
 /*
  * System instructions to access ETM registers.
  * See ETMv4.4 spec ARM IHI0064F section 4.3.6 System instructions