提交 edf2377c 编写于 作者: L Linus Torvalds

Merge tag 'backlight-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight changes from Lee Jones:
 - core: call put_device() instead of kfree()
 - gpio-backlight: add DT support
 - lm3639_bl driver: use managed resources

* tag 'backlight-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: lm3639: Use devm_backlight_device_register()
  backlight: gpio-backlight: Add DT support
  backlight: core: Replace kfree with put_device
gpio-backlight bindings
Required properties:
- compatible: "gpio-backlight"
- gpios: describes the gpio that is used for enabling/disabling the backlight.
refer to bindings/gpio/gpio.txt for more details.
Optional properties:
- default-on: enable the backlight at boot.
Example:
backlight {
compatible = "gpio-backlight";
gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
default-on;
};
......@@ -347,7 +347,7 @@ struct backlight_device *backlight_device_register(const char *name,
rc = device_register(&new_bd->dev);
if (rc) {
kfree(new_bd);
put_device(&new_bd->dev);
return ERR_PTR(rc);
}
......
......@@ -13,6 +13,8 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/platform_data/gpio_backlight.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
......@@ -23,6 +25,7 @@ struct gpio_backlight {
int gpio;
int active;
int def_value;
};
static int gpio_backlight_update_status(struct backlight_device *bl)
......@@ -60,6 +63,29 @@ static const struct backlight_ops gpio_backlight_ops = {
.check_fb = gpio_backlight_check_fb,
};
static int gpio_backlight_probe_dt(struct platform_device *pdev,
struct gpio_backlight *gbl)
{
struct device_node *np = pdev->dev.of_node;
enum of_gpio_flags gpio_flags;
gbl->gpio = of_get_gpio_flags(np, 0, &gpio_flags);
if (!gpio_is_valid(gbl->gpio)) {
if (gbl->gpio != -EPROBE_DEFER) {
dev_err(&pdev->dev,
"Error: The gpios parameter is missing or invalid.\n");
}
return gbl->gpio;
}
gbl->active = (gpio_flags & OF_GPIO_ACTIVE_LOW) ? 0 : 1;
gbl->def_value = of_property_read_bool(np, "default-on");
return 0;
}
static int gpio_backlight_probe(struct platform_device *pdev)
{
struct gpio_backlight_platform_data *pdata =
......@@ -67,10 +93,12 @@ static int gpio_backlight_probe(struct platform_device *pdev)
struct backlight_properties props;
struct backlight_device *bl;
struct gpio_backlight *gbl;
struct device_node *np = pdev->dev.of_node;
int ret;
if (!pdata) {
dev_err(&pdev->dev, "failed to find platform data\n");
if (!pdata && !np) {
dev_err(&pdev->dev,
"failed to find platform data or device tree node.\n");
return -ENODEV;
}
......@@ -79,14 +107,22 @@ static int gpio_backlight_probe(struct platform_device *pdev)
return -ENOMEM;
gbl->dev = &pdev->dev;
if (np) {
ret = gpio_backlight_probe_dt(pdev, gbl);
if (ret)
return ret;
} else {
gbl->fbdev = pdata->fbdev;
gbl->gpio = pdata->gpio;
gbl->active = pdata->active_low ? 0 : 1;
gbl->def_value = pdata->def_value;
}
ret = devm_gpio_request_one(gbl->dev, gbl->gpio, GPIOF_DIR_OUT |
(gbl->active ? GPIOF_INIT_LOW
: GPIOF_INIT_HIGH),
pdata->name);
pdata ? pdata->name : "backlight");
if (ret < 0) {
dev_err(&pdev->dev, "unable to request GPIO\n");
return ret;
......@@ -103,17 +139,25 @@ static int gpio_backlight_probe(struct platform_device *pdev)
return PTR_ERR(bl);
}
bl->props.brightness = pdata->def_value;
bl->props.brightness = gbl->def_value;
backlight_update_status(bl);
platform_set_drvdata(pdev, bl);
return 0;
}
#ifdef CONFIG_OF
static struct of_device_id gpio_backlight_of_match[] = {
{ .compatible = "gpio-backlight" },
{ /* sentinel */ }
};
#endif
static struct platform_driver gpio_backlight_driver = {
.driver = {
.name = "gpio-backlight",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(gpio_backlight_of_match),
},
.probe = gpio_backlight_probe,
};
......
......@@ -349,8 +349,9 @@ static int lm3639_probe(struct i2c_client *client,
props.brightness = pdata->init_brt_led;
props.max_brightness = pdata->max_brt_led;
pchip->bled =
backlight_device_register("lm3639_bled", pchip->dev, pchip,
&lm3639_bled_ops, &props);
devm_backlight_device_register(pchip->dev, "lm3639_bled",
pchip->dev, pchip, &lm3639_bled_ops,
&props);
if (IS_ERR(pchip->bled)) {
dev_err(&client->dev, "fail : backlight register\n");
ret = PTR_ERR(pchip->bled);
......@@ -360,7 +361,7 @@ static int lm3639_probe(struct i2c_client *client,
ret = device_create_file(&(pchip->bled->dev), &dev_attr_bled_mode);
if (ret < 0) {
dev_err(&client->dev, "failed : add sysfs entries\n");
goto err_bled_mode;
goto err_out;
}
/* flash */
......@@ -391,8 +392,6 @@ static int lm3639_probe(struct i2c_client *client,
led_classdev_unregister(&pchip->cdev_flash);
err_flash:
device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode);
err_bled_mode:
backlight_device_unregister(pchip->bled);
err_out:
return ret;
}
......@@ -407,10 +406,8 @@ static int lm3639_remove(struct i2c_client *client)
led_classdev_unregister(&pchip->cdev_torch);
if (&pchip->cdev_flash)
led_classdev_unregister(&pchip->cdev_flash);
if (pchip->bled) {
if (pchip->bled)
device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode);
backlight_device_unregister(pchip->bled);
}
return 0;
}
......@@ -432,6 +429,6 @@ static struct i2c_driver lm3639_i2c_driver = {
module_i2c_driver(lm3639_i2c_driver);
MODULE_DESCRIPTION("Texas Instruments Backlight+Flash LED driver for LM3639");
MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>");
MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>");
MODULE_LICENSE("GPL v2");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册