drm/i915/dp: Fix dsc bpp calculations, v5.
There was a integer wraparound when mode_clock became too high, and we didn't correct for the FEC overhead factor when dividing, with the calculations breaking at HBR3. As a result our calculated bpp was way too high, and the link width limitation never came into effect. Print out the resulting bpp calcululations as a sanity check, just in case we ever have to debug it later on again. We also used the wrong factor for FEC. While bspec mentions 2.4%, all the calculations use 1/0.972261, and the same ratio should be applied to data M/N as well, so use it there when FEC is enabled. This fixes the FIFO underrun we are seeing with FEC enabled. Changes since v2: - Handle fec_enable in intel_link_compute_m_n, so only data M/N is adjusted. (Ville) - Fix initial hardware readout for FEC. (Ville) Changes since v3: - Remove bogus fec_to_mode_clock. (Ville) Changes since v4: - Use the correct register for icl. (Ville) - Split hw readout to a separate patch. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: d9218c8f ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC") Cc: <stable@vger.kernel.org> # v5.0+ Cc: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190925082110.17439-1-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Showing
想要评论请 注册 或 登录