From ec05e7a8aaf5fd73a64d28fc9f28384ea247cc1c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 3 Jun 2013 12:13:17 +0200 Subject: [PATCH] video: xilinxfb: Do not name out_be32 in function name out_be32 IO function is not supported by ARM. It is only available for PPC and Microblaze. Because this driver can be used on ARM let's remove out_be32 from function name. Signed-off-by: Michal Simek Acked-by: Arnd Bergmann Signed-off-by: Tomi Valkeinen --- drivers/video/xilinxfb.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c index aecd15d0b8e5..c9b442b928e5 100644 --- a/drivers/video/xilinxfb.c +++ b/drivers/video/xilinxfb.c @@ -57,7 +57,7 @@ * In case of direct PLB access the second control register will be at * an offset of 4 as compared to the DCR access where the offset is 1 * i.e. REG_CTRL. So this is taken care in the function - * xilinx_fb_out_be32 where it left shifts the offset 2 times in case of + * xilinx_fb_out32 where it left shifts the offset 2 times in case of * direct PLB access. */ #define NUM_REGS 2 @@ -150,7 +150,7 @@ struct xilinxfb_drvdata { * To perform the read/write on the registers we need to check on * which bus its connected and call the appropriate write API. */ -static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset, +static void xilinx_fb_out32(struct xilinxfb_drvdata *drvdata, u32 offset, u32 val) { if (drvdata->flags & PLB_ACCESS_FLAG) @@ -197,7 +197,7 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi) switch (blank_mode) { case FB_BLANK_UNBLANK: /* turn on panel */ - xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default); + xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default); break; case FB_BLANK_NORMAL: @@ -205,7 +205,7 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi) case FB_BLANK_HSYNC_SUSPEND: case FB_BLANK_POWERDOWN: /* turn off panel */ - xilinx_fb_out_be32(drvdata, REG_CTRL, 0); + xilinx_fb_out32(drvdata, REG_CTRL, 0); default: break; @@ -280,13 +280,13 @@ static int xilinxfb_assign(struct device *dev, memset_io((void __iomem *)drvdata->fb_virt, 0, fbsize); /* Tell the hardware where the frame buffer is */ - xilinx_fb_out_be32(drvdata, REG_FB_ADDR, drvdata->fb_phys); + xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys); /* Turn on the display */ drvdata->reg_ctrl_default = REG_CTRL_ENABLE; if (pdata->rotate_screen) drvdata->reg_ctrl_default |= REG_CTRL_ROTATE; - xilinx_fb_out_be32(drvdata, REG_CTRL, + xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default); /* Fill struct fb_info */ @@ -345,7 +345,7 @@ static int xilinxfb_assign(struct device *dev, iounmap(drvdata->fb_virt); /* Turn off the display */ - xilinx_fb_out_be32(drvdata, REG_CTRL, 0); + xilinx_fb_out32(drvdata, REG_CTRL, 0); err_fbmem: if (drvdata->flags & PLB_ACCESS_FLAG) @@ -381,7 +381,7 @@ static int xilinxfb_release(struct device *dev) iounmap(drvdata->fb_virt); /* Turn off the display */ - xilinx_fb_out_be32(drvdata, REG_CTRL, 0); + xilinx_fb_out32(drvdata, REG_CTRL, 0); /* Release the resources, as allocated based on interface */ if (drvdata->flags & PLB_ACCESS_FLAG) { -- GitLab