From eb798c641a34ae9cee9fcacfbe5dd40bd7777607 Mon Sep 17 00:00:00 2001 From: Vinit Shenoy Date: Tue, 17 Apr 2012 12:40:13 +0530 Subject: [PATCH] spi/pl022: Fix range checking for bits per word pl022 ssp controller supports word lengths from 4 to 16 (or 32) bits. Currently implemented checks were incorrect. It has following check if (pl022->vendor->max_bpw >= 32) which must be checking for <=. Also error print message is incorrect, that prints "range is from 1 to 16". Fix both these issues. Signed-off-by: Vinit Shenoy Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/spi-pl022.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 09c925aaf320..1ead49dbebce 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1823,9 +1823,12 @@ static int pl022_setup(struct spi_device *spi) } else chip->cs_control = chip_info->cs_control; - if (bits <= 3) { - /* PL022 doesn't support less than 4-bits */ + /* Check bits per word with vendor specific range */ + if ((bits <= 3) || (bits > pl022->vendor->max_bpw)) { status = -ENOTSUPP; + dev_err(&spi->dev, "illegal data size for this controller!\n"); + dev_err(&spi->dev, "This controller can only handle 4 <= n <= %d bit words\n", + pl022->vendor->max_bpw); goto err_config_params; } else if (bits <= 8) { dev_dbg(&spi->dev, "4 <= n <=8 bits per word\n"); @@ -1838,20 +1841,10 @@ static int pl022_setup(struct spi_device *spi) chip->read = READING_U16; chip->write = WRITING_U16; } else { - if (pl022->vendor->max_bpw >= 32) { - dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n"); - chip->n_bytes = 4; - chip->read = READING_U32; - chip->write = WRITING_U32; - } else { - dev_err(&spi->dev, - "illegal data size for this controller!\n"); - dev_err(&spi->dev, - "a standard pl022 can only handle " - "1 <= n <= 16 bit words\n"); - status = -ENOTSUPP; - goto err_config_params; - } + dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n"); + chip->n_bytes = 4; + chip->read = READING_U32; + chip->write = WRITING_U32; } /* Now Initialize all register settings required for this chip */ -- GitLab