From e8fc721a9ab8dd6723063a92f5c5fdb5eaffbd6e Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 28 Dec 2012 13:25:09 +0100 Subject: [PATCH] power/reset: Add a new driver to turn QNAP board power off The QNAP NAS boxes have a microcontroller attached to the SoCs second serial port. By sending it a simple command, it will turn the power for the board off. This driver registers a function for pm_power_off to send such a command. Signed-off-by: Andrew Lunn Signed-off-by: Anton Vorontsov --- .../bindings/power_supply/qnap-poweroff.txt | 13 ++ drivers/power/reset/Kconfig | 9 ++ drivers/power/reset/Makefile | 1 + drivers/power/reset/qnap-poweroff.c | 116 ++++++++++++++++++ 4 files changed, 139 insertions(+) create mode 100644 Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt create mode 100644 drivers/power/reset/qnap-poweroff.c diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt new file mode 100644 index 000000000000..9a599d27bd75 --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt @@ -0,0 +1,13 @@ +* QNAP Power Off + +QNAP NAS devices have a microcontroller controlling the main power +supply. This microcontroller is connected to UART1 of the Kirkwood and +Orion5x SoCs. Sending the charactor 'A', at 19200 baud, tells the +microcontroller to turn the power off. This driver adds a handler to +pm_power_off which is called to turn the power off. + +Required Properties: +- compatible: Should be "qnap,power-off" + +- reg: Address and length of the register set for UART1 +- clocks: tclk clock diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 6461b489fb09..6453aac701c0 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -13,3 +13,12 @@ config POWER_RESET_GPIO This driver supports turning off your board via a GPIO line. If your board needs a GPIO high/low to power down, say Y and create a binding in your devicetree. + +config POWER_RESET_QNAP + bool "QNAP power-off driver" + depends on OF_GPIO && POWER_RESET && PLAT_ORION + help + This driver supports turning off QNAP NAS devices by sending + commands to the microcontroller which controls the main power. + + Say Y if you have a QNAP NAS. diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index 751488a4a0c5..c4d3b2d11b9e 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o +obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c new file mode 100644 index 000000000000..cecb317cf2fe --- /dev/null +++ b/drivers/power/reset/qnap-poweroff.c @@ -0,0 +1,116 @@ +/* + * QNAP Turbo NAS Board power off + * + * Copyright (C) 2012 Andrew Lunn + * + * Based on the code from: + * + * Copyright (C) 2009 Martin Michlmayr + * Copyright (C) 2008 Byron Bradley + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define UART1_REG(x) (base + ((UART_##x) << 2)) + +static void __iomem *base; +static unsigned long tclk; + +static void qnap_power_off(void) +{ + /* 19200 baud divisor */ + const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200)); + + pr_err("%s: triggering power-off...\n", __func__); + + /* hijack UART1 and reset into sane state (19200,8n1) */ + writel(0x83, UART1_REG(LCR)); + writel(divisor & 0xff, UART1_REG(DLL)); + writel((divisor >> 8) & 0xff, UART1_REG(DLM)); + writel(0x03, UART1_REG(LCR)); + writel(0x00, UART1_REG(IER)); + writel(0x00, UART1_REG(FCR)); + writel(0x00, UART1_REG(MCR)); + + /* send the power-off command 'A' to PIC */ + writel('A', UART1_REG(TX)); +} + +static int qnap_power_off_probe(struct platform_device *pdev) +{ + struct resource *res; + struct clk *clk; + char symname[KSYM_NAME_LEN]; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Missing resource"); + return -EINVAL; + } + + base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!base) { + dev_err(&pdev->dev, "Unable to map resource"); + return -EINVAL; + } + + /* We need to know tclk in order to calculate the UART divisor */ + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Clk missing"); + return PTR_ERR(clk); + } + + tclk = clk_get_rate(clk); + + /* Check that nothing else has already setup a handler */ + if (pm_power_off) { + lookup_symbol_name((ulong)pm_power_off, symname); + dev_err(&pdev->dev, + "pm_power_off already claimed %p %s", + pm_power_off, symname); + return -EBUSY; + } + pm_power_off = qnap_power_off; + + return 0; +} + +static int qnap_power_off_remove(struct platform_device *pdev) +{ + pm_power_off = NULL; + return 0; +} + +static const struct of_device_id qnap_power_off_of_match_table[] = { + { .compatible = "qnap,power-off", }, + {} +}; +MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table); + +static struct platform_driver qnap_power_off_driver = { + .probe = qnap_power_off_probe, + .remove = qnap_power_off_remove, + .driver = { + .owner = THIS_MODULE, + .name = "qnap_power_off", + .of_match_table = of_match_ptr(qnap_power_off_of_match_table), + }, +}; +module_platform_driver(qnap_power_off_driver); + +MODULE_AUTHOR("Andrew Lunn "); +MODULE_DESCRIPTION("QNAP Power off driver"); +MODULE_LICENSE("GPLv2+"); -- GitLab