From e6afea0bbf129f88dc3fc39fd0d769f9ff064172 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Wed, 18 Jun 2014 17:21:48 +0530 Subject: [PATCH] drivers: net: cpsw: fix dual EMAC stall when connected to same switch In commit 629c9a8fd0bbdfc6d702526b327470166ec39c6b (drivers: net: cpsw: Add default vlan for dual emac case also), api cpsw_add_default_vlan() also changes the port vlan which is required to seperate the ports which results in the following behavior In Dual EMAC mode, when both the Etnernet connected is connected to same switch, it creates a loop in the switch and when a broadcast packet is received it is forwarded to the other port which stalls the whole switch and needs a reset/power cycle to the switch to recover. So intead of using the api, add only the default VLAN entry in dual EMAC case. Cc: Yegor Yefremov Cc: Felipe Balbi Signed-off-by: Mugunthan V N Tested-by: Yegor Yefremov Tested-by: Felipe Balbi Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index ff380dac6629..b988d16cd34e 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1212,7 +1212,12 @@ static int cpsw_ndo_open(struct net_device *ndev) for_each_slave(priv, cpsw_slave_open, priv); /* Add default VLAN */ - cpsw_add_default_vlan(priv); + if (!priv->data.dual_emac) + cpsw_add_default_vlan(priv); + else + cpsw_ale_add_vlan(priv->ale, priv->data.default_vlan, + ALE_ALL_PORTS << priv->host_port, + ALE_ALL_PORTS << priv->host_port, 0, 0); if (!cpsw_common_res_usage_state(priv)) { /* setup tx dma to fixed prio and zero offset */ -- GitLab