From e4cd2ff89f91b0556a2e2d928219b2908cafd67f Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 27 Oct 2007 13:39:57 +0200 Subject: [PATCH] rt2x00: Split rt61/rt73 antenna selection into RX and TX antenna Based on investigation of the legacy drivers, I have made the following assumptions of the antenna setup: - R77 is the TX antenna configuration - RF2529 fetches default antenna selection from NIC eeprom word With these assumptions we can change the antenna configuration to correctly read both antenna setup values and correctly configure the antenna. And we can now also configure the antenna for RF2529 without a double antenna. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville Signed-off-by: David S. Miller --- drivers/net/wireless/rt2x00/rt61pci.c | 215 +++++++++++++++++--------- drivers/net/wireless/rt2x00/rt61pci.h | 2 +- drivers/net/wireless/rt2x00/rt73usb.c | 58 +++++-- drivers/net/wireless/rt2x00/rt73usb.h | 2 +- 4 files changed, 189 insertions(+), 88 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index c57d39002bfb..7c97761034e7 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -424,6 +424,29 @@ static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, !rt2x00_rf(&rt2x00dev->chip, RF5225)); + /* + * Configure the TX antenna. + */ + switch (ant->tx) { + case ANTENNA_A: + rt2x00_set_field8(&r77, BBP_R77_TX_ANTENNA, 0); + break; + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + /* + * NOTE: We should never come here because rt2x00lib is + * supposed to catch this and send us the correct antenna + * explicitely. However we are nog going to bug about this. + * Instead, just default to antenna B. + */ + case ANTENNA_B: + rt2x00_set_field8(&r77, BBP_R77_TX_ANTENNA, 3); + break; + } + + /* + * Configure the RX antenna. + */ switch (ant->rx) { case ANTENNA_HW_DIVERSITY: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); @@ -433,11 +456,6 @@ static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev, case ANTENNA_A: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - - if (rt2x00dev->curr_hwmode == HWMODE_A) - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); - else - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); break; case ANTENNA_SW_DIVERSITY: /* @@ -449,11 +467,6 @@ static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev, case ANTENNA_B: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - - if (rt2x00dev->curr_hwmode == HWMODE_A) - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); - else - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); break; } @@ -478,13 +491,35 @@ static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)); + /* + * Configure the TX antenna. + */ + switch (ant->tx) { + case ANTENNA_A: + rt2x00_set_field8(&r77, BBP_R77_TX_ANTENNA, 0); + break; + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + /* + * NOTE: We should never come here because rt2x00lib is + * supposed to catch this and send us the correct antenna + * explicitely. However we are nog going to bug about this. + * Instead, just default to antenna B. + */ + case ANTENNA_B: + rt2x00_set_field8(&r77, BBP_R77_TX_ANTENNA, 3); + break; + } + + /* + * Configure the RX antenna. + */ switch (ant->rx) { case ANTENNA_HW_DIVERSITY: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); break; case ANTENNA_A: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); break; case ANTENNA_SW_DIVERSITY: /* @@ -495,7 +530,6 @@ static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev, */ case ANTENNA_B: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); break; } @@ -530,74 +564,75 @@ static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev, u8 r3; u8 r4; u8 r77; + u8 rx_ant; rt61pci_bbp_read(rt2x00dev, 3, &r3); rt61pci_bbp_read(rt2x00dev, 4, &r4); rt61pci_bbp_read(rt2x00dev, 77, &r77); + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); + rx_ant = !!(rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED) & 2); rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) && - rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) { - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 1); - rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1); - } else if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY)) { - if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED) >= 2) { - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); - rt61pci_bbp_write(rt2x00dev, 77, r77); - } - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); - } else if (!rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) && - rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) { - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); + /* + * Configure the TX antenna. + */ + switch (ant->tx) { + case ANTENNA_A: + rt2x00_set_field8(&r77, BBP_R77_TX_ANTENNA, 0); + break; + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + /* + * NOTE: We should never come here because rt2x00lib is + * supposed to catch this and send us the correct antenna + * explicitely. However we are nog going to bug about this. + * Instead, just default to antenna B. + */ + case ANTENNA_B: + rt2x00_set_field8(&r77, BBP_R77_TX_ANTENNA, 3); + break; + } - switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) { - case 0: - rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1); - break; - case 1: - rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 0); - break; - case 2: - rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0); - break; - case 3: - rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); - break; - } - } else if (!rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) && - !rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) { + /* + * Configure the RX antenna. + */ + switch (ant->rx) { + case ANTENNA_A: + rt61pci_config_antenna_2529_rx(rt2x00dev, 0, rx_ant); + break; + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + /* + * NOTE: We should never come here because rt2x00lib is + * supposed to catch this and send us the correct antenna + * explicitely. However we are nog going to bug about this. + * Instead, just default to antenna B. + */ + case ANTENNA_B: + rt61pci_config_antenna_2529_rx(rt2x00dev, 1, rx_ant); + break; + } + + /* + * FIXME: We are using the default antenna setup to + * determine the remaining settings. This because we + * need to know what the EEPROM indicated. + * It is however unclear if this is required, and overall + * using the default antenna settings here is incorrect + * since mac80211 might have told us to use fixed settings. + */ + if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); + else rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) { - case 0: - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); - rt61pci_bbp_write(rt2x00dev, 77, r77); - rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1); - break; - case 1: - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); - rt61pci_bbp_write(rt2x00dev, 77, r77); - rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 0); - break; - case 2: - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); - rt61pci_bbp_write(rt2x00dev, 77, r77); - rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0); - break; - case 3: - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); - rt61pci_bbp_write(rt2x00dev, 77, r77); - rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); - break; - } - } + rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, + (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) && + (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)); + rt61pci_bbp_write(rt2x00dev, 77, r77); rt61pci_bbp_write(rt2x00dev, 3, r3); rt61pci_bbp_write(rt2x00dev, 4, r4); } @@ -2030,6 +2065,12 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) return -ENODEV; } + /* + * Determine number of antenna's. + */ + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2) + __set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags); + /* * Identify default antenna configuration. */ @@ -2044,12 +2085,6 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE)) __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags); - /* - * Determine number of antenna's. - */ - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2) - __set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags); - /* * Detect if this device has an hardware controlled radio. */ @@ -2077,6 +2112,38 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); + /* + * When working with a RF2529 chip without double antenna + * the antenna settings should be gathered from the NIC + * eeprom word. + */ + if (rt2x00_rf(&rt2x00dev->chip, RF2529) && + !test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) { + switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) { + case 0: + rt2x00dev->default_ant.tx = ANTENNA_B; + rt2x00dev->default_ant.rx = ANTENNA_A; + break; + case 1: + rt2x00dev->default_ant.tx = ANTENNA_B; + rt2x00dev->default_ant.rx = ANTENNA_B; + break; + case 2: + rt2x00dev->default_ant.tx = ANTENNA_A; + rt2x00dev->default_ant.rx = ANTENNA_A; + break; + case 3: + rt2x00dev->default_ant.tx = ANTENNA_A; + rt2x00dev->default_ant.rx = ANTENNA_B; + break; + } + + if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) + rt2x00dev->default_ant.tx = ANTENNA_SW_DIVERSITY; + if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY)) + rt2x00dev->default_ant.rx = ANTENNA_SW_DIVERSITY; + } + /* * Store led settings, for correct led behaviour. * If the eeprom value is invalid, diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index 6721d7dd32bc..ba5101649403 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -1083,7 +1083,7 @@ struct hw_pairwise_ta_entry { /* * R77 */ -#define BBP_R77_PAIR FIELD8(0x03) +#define BBP_R77_TX_ANTENNA FIELD8(0x03) /* * RF registers diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index e3d5e78661ea..b9d5310c386f 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -408,6 +408,29 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0); + /* + * Configure the TX antenna. + */ + switch (ant->tx) { + case ANTENNA_A: + rt2x00_set_field8(&r77, BBP_R77_TX_ANTENNA, 0); + break; + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + /* + * NOTE: We should never come here because rt2x00lib is + * supposed to catch this and send us the correct antenna + * explicitely. However we are nog going to bug about this. + * Instead, just default to antenna B. + */ + case ANTENNA_B: + rt2x00_set_field8(&r77, BBP_R77_TX_ANTENNA, 3); + break; + } + + /* + * Configure the RX antenna. + */ switch (ant->rx) { case ANTENNA_HW_DIVERSITY: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); @@ -417,11 +440,6 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev, case ANTENNA_A: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - - if (rt2x00dev->curr_hwmode == HWMODE_A) - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); - else - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); break; case ANTENNA_SW_DIVERSITY: /* @@ -433,11 +451,6 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev, case ANTENNA_B: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - - if (rt2x00dev->curr_hwmode == HWMODE_A) - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); - else - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); break; } @@ -461,13 +474,35 @@ static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)); + /* + * Configure the TX antenna. + */ + switch (ant->tx) { + case ANTENNA_A: + rt2x00_set_field8(&r77, BBP_R77_TX_ANTENNA, 0); + break; + case ANTENNA_SW_DIVERSITY: + case ANTENNA_HW_DIVERSITY: + /* + * NOTE: We should never come here because rt2x00lib is + * supposed to catch this and send us the correct antenna + * explicitely. However we are nog going to bug about this. + * Instead, just default to antenna B. + */ + case ANTENNA_B: + rt2x00_set_field8(&r77, BBP_R77_TX_ANTENNA, 3); + break; + } + + /* + * Configure the RX antenna. + */ switch (ant->rx) { case ANTENNA_HW_DIVERSITY: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); break; case ANTENNA_A: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); break; case ANTENNA_SW_DIVERSITY: /* @@ -478,7 +513,6 @@ static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev, */ case ANTENNA_B: rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); break; } diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h index f0951519f74b..13f479c7da0d 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -719,7 +719,7 @@ struct hw_pairwise_ta_entry { /* * R77 */ -#define BBP_R77_PAIR FIELD8(0x03) +#define BBP_R77_TX_ANTENNA FIELD8(0x03) /* * RF registers -- GitLab