ARM: OMAP: board-4430-sdp: Pin mux configuration for audio needs

u-boot stopped configuring 'non essential' pins recently. These pins are
essential for audio and need to be done to have working audio on the board.
Pin Mux configuration for: twl6040 audpwron gpio, McPDM, DMIC, McBSP1 and
McBSP2.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/board-4430sdp.c

@@ -830,6 +830,32 @@ static struct omap_board_mux board_mux[] __initdata = {
 	/* NIRQ2 for twl6040 */
 	OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
 		  OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
+	/* GPIO_127 for twl6040 */
+	OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+	/* McPDM */
+	OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	/* DMIC */
+	OMAP4_MUX(ABE_DMIC_CLK1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP4_MUX(ABE_DMIC_DIN1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP4_MUX(ABE_DMIC_DIN2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP4_MUX(ABE_DMIC_DIN3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	/* McBSP1 */
+	OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+		  OMAP_PULL_ENA),
+	OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	/* McBSP2 */
+	OMAP4_MUX(ABE_MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP4_MUX(ABE_MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP4_MUX(ABE_MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+		  OMAP_PULL_ENA),
+	OMAP4_MUX(ABE_MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };