提交 e33a0f96 编写于 作者: A Alexander Aring 提交者: Marcel Holtmann

mrf24j40: add cca ed level support

This patch supports handling to set the cca energy detection level for
the mrf24j40 transceiver.
Reviewed-by: NStefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
上级 f1d78127
......@@ -822,6 +822,48 @@ static int mrf24j40_set_cca_mode(struct ieee802154_hw *hw,
val << 6);
}
/* array for representing ed levels */
static const s32 mrf24j40_ed_levels[] = {
-9000, -8900, -8800, -8700, -8600, -8500, -8400, -8300, -8200, -8100,
-8000, -7900, -7800, -7700, -7600, -7500, -7400, -7300, -7200, -7100,
-7000, -6900, -6800, -6700, -6600, -6500, -6400, -6300, -6200, -6100,
-6000, -5900, -5800, -5700, -5600, -5500, -5400, -5300, -5200, -5100,
-5000, -4900, -4800, -4700, -4600, -4500, -4400, -4300, -4200, -4100,
-4000, -3900, -3800, -3700, -3600, -3500
};
/* map ed levels to register value */
static const s32 mrf24j40_ed_levels_map[][2] = {
{ -9000, 0 }, { -8900, 1 }, { -8800, 2 }, { -8700, 5 }, { -8600, 9 },
{ -8500, 13 }, { -8400, 18 }, { -8300, 23 }, { -8200, 27 },
{ -8100, 32 }, { -8000, 37 }, { -7900, 43 }, { -7800, 48 },
{ -7700, 53 }, { -7600, 58 }, { -7500, 63 }, { -7400, 68 },
{ -7300, 73 }, { -7200, 78 }, { -7100, 83 }, { -7000, 89 },
{ -6900, 95 }, { -6800, 100 }, { -6700, 107 }, { -6600, 111 },
{ -6500, 117 }, { -6400, 121 }, { -6300, 125 }, { -6200, 129 },
{ -6100, 133 }, { -6000, 138 }, { -5900, 143 }, { -5800, 148 },
{ -5700, 153 }, { -5600, 159 }, { -5500, 165 }, { -5400, 170 },
{ -5300, 176 }, { -5200, 183 }, { -5100, 188 }, { -5000, 193 },
{ -4900, 198 }, { -4800, 203 }, { -4700, 207 }, { -4600, 212 },
{ -4500, 216 }, { -4400, 221 }, { -4300, 225 }, { -4200, 228 },
{ -4100, 233 }, { -4000, 239 }, { -3900, 245 }, { -3800, 250 },
{ -3700, 253 }, { -3600, 254 }, { -3500, 255 },
};
static int mrf24j40_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
{
struct mrf24j40 *devrec = hw->priv;
int i;
for (i = 0; i < ARRAY_SIZE(mrf24j40_ed_levels_map); i++) {
if (mrf24j40_ed_levels_map[i][0] == mbm)
return regmap_write(devrec->regmap_short, REG_CCAEDTH,
mrf24j40_ed_levels_map[i][1]);
}
return -EINVAL;
}
static const struct ieee802154_ops mrf24j40_ops = {
.owner = THIS_MODULE,
.xmit_async = mrf24j40_tx,
......@@ -832,6 +874,7 @@ static const struct ieee802154_ops mrf24j40_ops = {
.set_hw_addr_filt = mrf24j40_filter,
.set_csma_params = mrf24j40_csma_params,
.set_cca_mode = mrf24j40_set_cca_mode,
.set_cca_ed_level = mrf24j40_set_cca_ed_level,
};
static void mrf24j40_intstat_complete(void *context)
......@@ -1041,6 +1084,10 @@ static void mrf24j40_phy_setup(struct mrf24j40 *devrec)
BIT(NL802154_CCA_CARRIER) |
BIT(NL802154_CCA_ENERGY_CARRIER);
devrec->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND);
devrec->hw->phy->cca_ed_level = -6900;
devrec->hw->phy->supported.cca_ed_levels = mrf24j40_ed_levels;
devrec->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(mrf24j40_ed_levels);
}
static int mrf24j40_probe(struct spi_device *spi)
......@@ -1066,7 +1113,8 @@ static int mrf24j40_probe(struct spi_device *spi)
devrec->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
IEEE802154_HW_CSMA_PARAMS;
devrec->hw->phy->flags = WPAN_PHY_FLAG_CCA_MODE;
devrec->hw->phy->flags = WPAN_PHY_FLAG_CCA_MODE |
WPAN_PHY_FLAG_CCA_ED_LEVEL;
mrf24j40_setup_tx_spi_messages(devrec);
mrf24j40_setup_rx_spi_messages(devrec);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册