diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index e6f4eca09ee36f5cbbe9ade6aadf07aa17ef6332..491ae7923b10dd7ee8e156b53ee5bdb16edc1c30 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -16,8 +16,6 @@ config ARC select GENERIC_FIND_FIRST_BIT # for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP select GENERIC_IRQ_SHOW - select GENERIC_KERNEL_EXECVE - select GENERIC_KERNEL_THREAD select GENERIC_PENDING_IRQ if SMP select GENERIC_SMP_IDLE_THREAD select HAVE_ARCH_KGDB @@ -61,9 +59,6 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_HWEIGHT def_bool y -config BINFMT_ELF - def_bool y - config STACKTRACE_SUPPORT def_bool y select STACKTRACE @@ -82,6 +77,7 @@ menu "ARC Architecture Configuration" menu "ARC Platform/SoC/Board" source "arch/arc/plat-arcfpga/Kconfig" +source "arch/arc/plat-tb10x/Kconfig" #New platform adds here endmenu @@ -134,9 +130,6 @@ if SMP config ARC_HAS_COH_CACHES def_bool n -config ARC_HAS_COH_LLSC - def_bool n - config ARC_HAS_COH_RTSC def_bool n @@ -304,6 +297,9 @@ config ARC_FPU_SAVE_RESTORE based on actual usage of FPU by a task. Thus our implemn does this for all tasks in system. +config ARC_CANT_LLSC + def_bool n + menuconfig ARC_CPU_REL_4_10 bool "Enable support for Rel 4.10 features" default n @@ -314,9 +310,7 @@ menuconfig ARC_CPU_REL_4_10 config ARC_HAS_LLSC bool "Insn: LLOCK/SCOND (efficient atomic ops)" default y - depends on ARC_CPU_770 - # if SMP, enable LLSC ONLY if ARC implementation has coherent atomics - depends on !SMP || ARC_HAS_COH_LLSC + depends on ARC_CPU_770 && !ARC_CANT_LLSC config ARC_HAS_SWAPE bool "Insn: SWAPE (endian-swap)" @@ -415,13 +409,6 @@ config ARC_DBG_TLB_MISS_COUNT Counts number of I and D TLB Misses and exports them via Debugfs The counters can be cleared via Debugfs as well -config CMDLINE - string "Kernel command line to built-in" - default "print-fatal-signals=1" - help - The default command line which will be appended to the optional - u-boot provided command line (see below) - config CMDLINE_UBOOT bool "Support U-boot kernel command line passing" default n @@ -430,8 +417,8 @@ config CMDLINE_UBOOT command line from the U-boot environment to the Linux kernel then switch this option on. ARC U-boot will setup the cmdline in RAM/flash and set r2 to point - to it. kernel startup code will copy the string into cmdline buffer - and also append CONFIG_CMDLINE. + to it. kernel startup code will append this to DeviceTree + /bootargs provided cmdline args. config ARC_BUILTIN_DTB_NAME string "Built in DTB" @@ -441,6 +428,10 @@ config ARC_BUILTIN_DTB_NAME source "kernel/Kconfig.preempt" +menu "Executable file formats" +source "fs/Kconfig.binfmt" +endmenu + endmenu # "ARC Architecture Configuration" source "mm/Kconfig" diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 92379c7cbc1a28f4cc05715f9cfda1a140ac02ea..183397fd289eb5e5146883147e2466538db984df 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -8,6 +8,10 @@ UTS_MACHINE := arc +ifeq ($(CROSS_COMPILE),) +CROSS_COMPILE := arc-elf32- +endif + KBUILD_DEFCONFIG := fpga_defconfig cflags-y += -mA7 -fno-common -pipe -fno-builtin -D__linux__ @@ -87,20 +91,23 @@ core-y += arch/arc/ core-y += arch/arc/boot/dts/ core-$(CONFIG_ARC_PLAT_FPGA_LEGACY) += arch/arc/plat-arcfpga/ +core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/plat-tb10x/ drivers-$(CONFIG_OPROFILE) += arch/arc/oprofile/ libs-y += arch/arc/lib/ $(LIBGCC) +boot := arch/arc/boot + #default target for make without any arguements. -KBUILD_IMAGE := bootpImage +KBUILD_IMAGE := bootpImage all: $(KBUILD_IMAGE) -boot := arch/arc/boot - bootpImage: vmlinux -uImage: vmlinux +boot_targets += uImage uImage.bin uImage.gz + +$(boot_targets): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ %.dtb %.dtb.S %.dtb.o: scripts diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile index 7d514c24e095e0e85b0505960f6af0ec3a4e9725..e597cb34c16a832e4d219fd95a688126427b34b3 100644 --- a/arch/arc/boot/Makefile +++ b/arch/arc/boot/Makefile @@ -3,7 +3,6 @@ targets := vmlinux.bin vmlinux.bin.gz uImage # uImage build relies on mkimage being availble on your host for ARC target # You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage # and make sure it's reacable from your PATH -MKIMAGE := $(srctree)/scripts/mkuboot.sh OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S @@ -12,7 +11,12 @@ LINUX_START_TEXT = $$(readelf -h vmlinux | \ UIMAGE_LOADADDR = $(CONFIG_LINUX_LINK_BASE) UIMAGE_ENTRYADDR = $(LINUX_START_TEXT) -UIMAGE_COMPRESSION = gzip + +suffix-y := bin +suffix-$(CONFIG_KERNEL_GZIP) := gz + +targets += uImage uImage.bin uImage.gz +extra-y += vmlinux.bin vmlinux.bin.gz $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) @@ -20,7 +24,12 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) -$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,uimage) +$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE + $(call if_changed,uimage,none) + +$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,uimage,gzip) -PHONY += FORCE +$(obj)/uImage: $(obj)/uImage.$(suffix-y) + @ln -sf $(notdir $<) $@ + @echo ' Image $@ is ready' diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile index 5776835d583f58a7e7776463a6ce552b503c9a17..faf240e29ec2cebc1b6f7762b0c0556de37f1a8f 100644 --- a/arch/arc/boot/dts/Makefile +++ b/arch/arc/boot/dts/Makefile @@ -8,6 +8,8 @@ endif obj-y += $(builtindtb-y).dtb.o targets += $(builtindtb-y).dtb +.SECONDARY: $(obj)/$(builtindtb-y).dtb.S + dtbs: $(addprefix $(obj)/, $(builtindtb-y).dtb) -clean-files := *.dtb +clean-files := *.dtb *.dtb.S diff --git a/arch/arc/boot/dts/abilis_tb100.dtsi b/arch/arc/boot/dts/abilis_tb100.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..941ad118a7e748773fa707379f32bb287ee5102f --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb100.dtsi @@ -0,0 +1,340 @@ +/* + * Abilis Systems TB100 SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/include/ "abilis_tb10x.dtsi" + +/* interrupt specifiers + * -------------------- + * 0: rising, 1: low, 2: high, 3: falling, + */ + +/ { + clock-frequency = <500000000>; /* 500 MHZ */ + + soc100 { + bus-frequency = <166666666>; + + pll0: oscillator { + clock-frequency = <1000000000>; + }; + cpu_clk: clkdiv_cpu { + clock-mult = <1>; + clock-div = <2>; + }; + ahb_clk: clkdiv_ahb { + clock-mult = <1>; + clock-div = <6>; + }; + + iomux: iomux@FF10601c { + /* Port 1 */ + pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ + pingrp = "mis0_pins"; + }; + pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ + pingrp = "mis1_pins"; + }; + pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ + pingrp = "gpioa_pins"; + }; + pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */ + pingrp = "mip1_pins"; + }; + /* Port 2 */ + pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */ + pingrp = "mis2_pins"; + }; + pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */ + pingrp = "mis3_pins"; + }; + pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */ + pingrp = "gpioc_pins"; + }; + pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */ + pingrp = "mip3_pins"; + }; + /* Port 3 */ + pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */ + pingrp = "mis4_pins"; + }; + pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */ + pingrp = "mis5_pins"; + }; + pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */ + pingrp = "gpioe_pins"; + }; + pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */ + pingrp = "mip5_pins"; + }; + /* Port 4 */ + pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */ + pingrp = "mis6_pins"; + }; + pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */ + pingrp = "mis7_pins"; + }; + pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */ + pingrp = "gpiog_pins"; + }; + pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */ + pingrp = "mip7_pins"; + }; + /* Port 5 */ + pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */ + pingrp = "gpioj_pins"; + }; + pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */ + pingrp = "gpiok_pins"; + }; + pctl_ciplus: pctl-ciplus { /* CI+ interface */ + pingrp = "ciplus_pins"; + }; + pctl_mcard: pctl-mcard { /* M-Card interface */ + pingrp = "mcard_pins"; + }; + /* Port 6 */ + pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */ + pingrp = "mop_pins"; + }; + pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */ + pingrp = "mos0_pins"; + }; + pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */ + pingrp = "mos1_pins"; + }; + pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */ + pingrp = "mos2_pins"; + }; + pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */ + pingrp = "mos3_pins"; + }; + /* Port 7 */ + pctl_uart0: pctl-uart0 { /* UART 0 */ + pingrp = "uart0_pins"; + }; + pctl_uart1: pctl-uart1 { /* UART 1 */ + pingrp = "uart1_pins"; + }; + pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */ + pingrp = "gpiol_pins"; + }; + pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */ + pingrp = "gpiom_pins"; + }; + /* Port 8 */ + pctl_spi3: pctl-spi3 { + pingrp = "spi3_pins"; + }; + /* Port 9 */ + pctl_spi1: pctl-spi1 { + pingrp = "spi1_pins"; + }; + pctl_gpio_n: pctl-gpio-n { + pingrp = "gpion_pins"; + }; + /* Unmuxed GPIOs */ + pctl_gpio_b: pctl-gpio-b { + pingrp = "gpiob_pins"; + }; + pctl_gpio_d: pctl-gpio-d { + pingrp = "gpiod_pins"; + }; + pctl_gpio_f: pctl-gpio-f { + pingrp = "gpiof_pins"; + }; + pctl_gpio_h: pctl-gpio-h { + pingrp = "gpioh_pins"; + }; + pctl_gpio_i: pctl-gpio-i { + pingrp = "gpioi_pins"; + }; + }; + + gpioa: gpio@FF140000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF140000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <0>; + gpio-pins = <&pctl_gpio_a>; + }; + gpiob: gpio@FF141000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF141000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <3>; + gpio-pins = <&pctl_gpio_b>; + }; + gpioc: gpio@FF142000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF142000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <5>; + gpio-pins = <&pctl_gpio_c>; + }; + gpiod: gpio@FF143000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF143000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <8>; + gpio-pins = <&pctl_gpio_d>; + }; + gpioe: gpio@FF144000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF144000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <10>; + gpio-pins = <&pctl_gpio_e>; + }; + gpiof: gpio@FF145000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF145000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <13>; + gpio-pins = <&pctl_gpio_f>; + }; + gpiog: gpio@FF146000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF146000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <15>; + gpio-pins = <&pctl_gpio_g>; + }; + gpioh: gpio@FF147000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF147000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <18>; + gpio-pins = <&pctl_gpio_h>; + }; + gpioi: gpio@FF148000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF148000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <20>; + gpio-pins = <&pctl_gpio_i>; + }; + gpioj: gpio@FF149000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF149000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <32>; + gpio-pins = <&pctl_gpio_j>; + }; + gpiok: gpio@FF14a000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14A000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <64>; + gpio-pins = <&pctl_gpio_k>; + }; + gpiol: gpio@FF14b000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14B000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <86>; + gpio-pins = <&pctl_gpio_l>; + }; + gpiom: gpio@FF14c000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14C000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <90>; + gpio-pins = <&pctl_gpio_m>; + }; + gpion: gpio@FF14d000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14D000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <94>; + gpio-pins = <&pctl_gpio_n>; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts new file mode 100644 index 0000000000000000000000000000000000000000..c0fd3623c39387d5f2fbdc1da3552f08ff13e4da --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts @@ -0,0 +1,127 @@ +/* + * Abilis Systems TB100 Development Kit PCB device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/dts-v1/; + +/include/ "abilis_tb100.dtsi" + +/ { + chosen { + bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8"; + }; + + aliases { }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x08000000>; /* 128M */ + }; + + soc100 { + uart@FF100000 { + pinctrl-names = "abilis,simple-default"; + pinctrl-0 = <&pctl_uart0>; + }; + ethernet@FE100000 { + phy-mode = "rgmii"; + }; + + i2c0: i2c@FF120000 { + sda-hold-time = <432>; + }; + i2c1: i2c@FF121000 { + sda-hold-time = <432>; + }; + i2c2: i2c@FF122000 { + sda-hold-time = <432>; + }; + i2c3: i2c@FF123000 { + sda-hold-time = <432>; + }; + i2c4: i2c@FF124000 { + sda-hold-time = <432>; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpioi 0>; + linux,default-trigger = "default-on"; + }; + heartbeat { + label = "Heartbeat"; + gpios = <&gpioi 1>; + linux,default-trigger = "heartbeat"; + }; + led2 { + label = "LED2"; + gpios = <&gpioi 2>; + default-state = "off"; + }; + led3 { + label = "LED3"; + gpios = <&gpioi 3>; + default-state = "off"; + }; + led4 { + label = "LED4"; + gpios = <&gpioi 4>; + default-state = "off"; + }; + led5 { + label = "LED5"; + gpios = <&gpioi 5>; + default-state = "off"; + }; + led6 { + label = "LED6"; + gpios = <&gpioi 6>; + default-state = "off"; + }; + led7 { + label = "LED7"; + gpios = <&gpioi 7>; + default-state = "off"; + }; + led8 { + label = "LED8"; + gpios = <&gpioi 8>; + default-state = "off"; + }; + led9 { + label = "LED9"; + gpios = <&gpioi 9>; + default-state = "off"; + }; + led10 { + label = "LED10"; + gpios = <&gpioi 10>; + default-state = "off"; + }; + led11 { + label = "LED11"; + gpios = <&gpioi 11>; + default-state = "off"; + }; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb101.dtsi b/arch/arc/boot/dts/abilis_tb101.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..fd25c212049ffe90bb8525ca9c522ca63f93a5e4 --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb101.dtsi @@ -0,0 +1,349 @@ +/* + * Abilis Systems TB101 SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/include/ "abilis_tb10x.dtsi" + +/* interrupt specifiers + * -------------------- + * 0: rising, 1: low, 2: high, 3: falling, + */ + +/ { + clock-frequency = <500000000>; /* 500 MHZ */ + + soc100 { + bus-frequency = <166666666>; + + pll0: oscillator { + clock-frequency = <1000000000>; + }; + cpu_clk: clkdiv_cpu { + clock-mult = <1>; + clock-div = <2>; + }; + ahb_clk: clkdiv_ahb { + clock-mult = <1>; + clock-div = <6>; + }; + + iomux: iomux@FF10601c { + /* Port 1 */ + pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ + pingrp = "mis0_pins"; + }; + pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ + pingrp = "mis1_pins"; + }; + pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ + pingrp = "gpioa_pins"; + }; + pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */ + pingrp = "mip1_pins"; + }; + /* Port 2 */ + pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */ + pingrp = "mis2_pins"; + }; + pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */ + pingrp = "mis3_pins"; + }; + pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */ + pingrp = "gpioc_pins"; + }; + pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */ + pingrp = "mip3_pins"; + }; + /* Port 3 */ + pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */ + pingrp = "mis4_pins"; + }; + pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */ + pingrp = "mis5_pins"; + }; + pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */ + pingrp = "gpioe_pins"; + }; + pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */ + pingrp = "mip5_pins"; + }; + /* Port 4 */ + pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */ + pingrp = "mis6_pins"; + }; + pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */ + pingrp = "mis7_pins"; + }; + pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */ + pingrp = "gpiog_pins"; + }; + pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */ + pingrp = "mip7_pins"; + }; + /* Port 5 */ + pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */ + pingrp = "gpioj_pins"; + }; + pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */ + pingrp = "gpiok_pins"; + }; + pctl_ciplus: pctl-ciplus { /* CI+ interface */ + pingrp = "ciplus_pins"; + }; + pctl_mcard: pctl-mcard { /* M-Card interface */ + pingrp = "mcard_pins"; + }; + pctl_stc0: pctl-stc0 { /* Smart card I/F 0 */ + pingrp = "stc0_pins"; + }; + pctl_stc1: pctl-stc1 { /* Smart card I/F 1 */ + pingrp = "stc1_pins"; + }; + /* Port 6 */ + pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */ + pingrp = "mop_pins"; + }; + pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */ + pingrp = "mos0_pins"; + }; + pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */ + pingrp = "mos1_pins"; + }; + pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */ + pingrp = "mos2_pins"; + }; + pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */ + pingrp = "mos3_pins"; + }; + /* Port 7 */ + pctl_uart0: pctl-uart0 { /* UART 0 */ + pingrp = "uart0_pins"; + }; + pctl_uart1: pctl-uart1 { /* UART 1 */ + pingrp = "uart1_pins"; + }; + pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */ + pingrp = "gpiol_pins"; + }; + pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */ + pingrp = "gpiom_pins"; + }; + /* Port 8 */ + pctl_spi3: pctl-spi3 { + pingrp = "spi3_pins"; + }; + pctl_jtag: pctl-jtag { + pingrp = "jtag_pins"; + }; + /* Port 9 */ + pctl_spi1: pctl-spi1 { + pingrp = "spi1_pins"; + }; + pctl_gpio_n: pctl-gpio-n { + pingrp = "gpion_pins"; + }; + /* Unmuxed GPIOs */ + pctl_gpio_b: pctl-gpio-b { + pingrp = "gpiob_pins"; + }; + pctl_gpio_d: pctl-gpio-d { + pingrp = "gpiod_pins"; + }; + pctl_gpio_f: pctl-gpio-f { + pingrp = "gpiof_pins"; + }; + pctl_gpio_h: pctl-gpio-h { + pingrp = "gpioh_pins"; + }; + pctl_gpio_i: pctl-gpio-i { + pingrp = "gpioi_pins"; + }; + }; + + gpioa: gpio@FF140000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF140000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <0>; + gpio-pins = <&pctl_gpio_a>; + }; + gpiob: gpio@FF141000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF141000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <3>; + gpio-pins = <&pctl_gpio_b>; + }; + gpioc: gpio@FF142000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF142000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <5>; + gpio-pins = <&pctl_gpio_c>; + }; + gpiod: gpio@FF143000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF143000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <8>; + gpio-pins = <&pctl_gpio_d>; + }; + gpioe: gpio@FF144000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF144000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <10>; + gpio-pins = <&pctl_gpio_e>; + }; + gpiof: gpio@FF145000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF145000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <13>; + gpio-pins = <&pctl_gpio_f>; + }; + gpiog: gpio@FF146000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF146000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <15>; + gpio-pins = <&pctl_gpio_g>; + }; + gpioh: gpio@FF147000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF147000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <18>; + gpio-pins = <&pctl_gpio_h>; + }; + gpioi: gpio@FF148000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF148000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <20>; + gpio-pins = <&pctl_gpio_i>; + }; + gpioj: gpio@FF149000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF149000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <32>; + gpio-pins = <&pctl_gpio_j>; + }; + gpiok: gpio@FF14a000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14A000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <64>; + gpio-pins = <&pctl_gpio_k>; + }; + gpiol: gpio@FF14b000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14B000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <86>; + gpio-pins = <&pctl_gpio_l>; + }; + gpiom: gpio@FF14c000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14C000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <90>; + gpio-pins = <&pctl_gpio_m>; + }; + gpion: gpio@FF14d000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14D000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <94>; + gpio-pins = <&pctl_gpio_n>; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts new file mode 100644 index 0000000000000000000000000000000000000000..6f8c381f62685102891817da925d6b6b8aed9827 --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts @@ -0,0 +1,127 @@ +/* + * Abilis Systems TB101 Development Kit PCB device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/dts-v1/; + +/include/ "abilis_tb101.dtsi" + +/ { + chosen { + bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8"; + }; + + aliases { }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x08000000>; /* 128M */ + }; + + soc100 { + uart@FF100000 { + pinctrl-names = "abilis,simple-default"; + pinctrl-0 = <&pctl_uart0>; + }; + ethernet@FE100000 { + phy-mode = "rgmii"; + }; + + i2c0: i2c@FF120000 { + sda-hold-time = <432>; + }; + i2c1: i2c@FF121000 { + sda-hold-time = <432>; + }; + i2c2: i2c@FF122000 { + sda-hold-time = <432>; + }; + i2c3: i2c@FF123000 { + sda-hold-time = <432>; + }; + i2c4: i2c@FF124000 { + sda-hold-time = <432>; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpioi 0>; + linux,default-trigger = "default-on"; + }; + heartbeat { + label = "Heartbeat"; + gpios = <&gpioi 1>; + linux,default-trigger = "heartbeat"; + }; + led2 { + label = "LED2"; + gpios = <&gpioi 2>; + default-state = "off"; + }; + led3 { + label = "LED3"; + gpios = <&gpioi 3>; + default-state = "off"; + }; + led4 { + label = "LED4"; + gpios = <&gpioi 4>; + default-state = "off"; + }; + led5 { + label = "LED5"; + gpios = <&gpioi 5>; + default-state = "off"; + }; + led6 { + label = "LED6"; + gpios = <&gpioi 6>; + default-state = "off"; + }; + led7 { + label = "LED7"; + gpios = <&gpioi 7>; + default-state = "off"; + }; + led8 { + label = "LED8"; + gpios = <&gpioi 8>; + default-state = "off"; + }; + led9 { + label = "LED9"; + gpios = <&gpioi 9>; + default-state = "off"; + }; + led10 { + label = "LED10"; + gpios = <&gpioi 10>; + default-state = "off"; + }; + led11 { + label = "LED11"; + gpios = <&gpioi 11>; + default-state = "off"; + }; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..a6139fc5aaa3e2f6faefbc7fdd5e369611697145 --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi @@ -0,0 +1,247 @@ +/* + * Abilis Systems TB10X SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* interrupt specifiers + * -------------------- + * 0: rising, 1: low, 2: high, 3: falling, + */ + +/ { + compatible = "abilis,arc-tb10x"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "snps,arc770d"; + reg = <0>; + }; + }; + + soc100 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0xfe000000 0xfe000000 0x02000000 + 0x000F0000 0x000F0000 0x00010000>; + compatible = "abilis,tb10x", "simple-bus"; + + pll0: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "pll0"; + }; + cpu_clk: clkdiv_cpu { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&pll0>; + clock-output-names = "cpu_clk"; + }; + ahb_clk: clkdiv_ahb { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&pll0>; + clock-output-names = "ahb_clk"; + }; + + iomux: iomux@FF10601c { + #address-cells = <1>; + #size-cells = <1>; + compatible = "abilis,tb10x-iomux"; + reg = <0xFF10601c 0x4>; + }; + + intc: interrupt-controller { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + tb10x_ictl: pic@fe002000 { + compatible = "abilis,tb10x_ictl"; + reg = <0xFE002000 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 30 31>; + }; + + uart@FF100000 { + compatible = "snps,dw-apb-uart", + "abilis,simple-pinctrl"; + reg = <0xFF100000 0x100>; + clock-frequency = <166666666>; + interrupts = <25 1>; + reg-shift = <2>; + reg-io-width = <4>; + interrupt-parent = <&tb10x_ictl>; + }; + ethernet@FE100000 { + compatible = "snps,dwmac-3.70a","snps,dwmac"; + reg = <0xFE100000 0x1058>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <6 1>; + interrupt-names = "macirq"; + clocks = <&ahb_clk>; + clock-names = "stmmaceth"; + }; + dma@FE000000 { + compatible = "snps,dma-spear1340"; + reg = <0xFE000000 0x400>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <14 1>; + dma-channels = <6>; + dma-requests = <0>; + dma-masters = <1>; + #dma-cells = <3>; + chan_allocation_order = <0>; + chan_priority = <1>; + block_size = <0x7ff>; + data_width = <2 0 0 0>; + clocks = <&ahb_clk>; + clock-names = "hclk"; + }; + + i2c0: i2c@FF120000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF120000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + i2c1: i2c@FF121000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF121000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + i2c2: i2c@FF122000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF122000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + i2c3: i2c@FF123000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF123000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + i2c4: i2c@FF124000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF124000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + + spi0: spi@0xFE010000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "abilis,tb100-spi"; + num-cs = <1>; + reg = <0xFE010000 0x20>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <26 1>; + clocks = <&ahb_clk>; + }; + spi1: spi@0xFE011000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "abilis,tb100-spi", + "abilis,simple-pinctrl"; + num-cs = <2>; + reg = <0xFE011000 0x20>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <10 1>; + clocks = <&ahb_clk>; + }; + + tb10x_tsm: tb10x-tsm@ff316000 { + compatible = "abilis,tb100-tsm"; + reg = <0xff316000 0x400>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <17 1>; + output-clkdiv = <4>; + global-packet-delay = <0x21>; + port-packet-delay = <0>; + }; + tb10x_stream_proc: tb10x-stream-proc { + compatible = "abilis,tb100-streamproc"; + reg = <0xfff00000 0x200>, + <0x000f0000 0x10000>, + <0xfff00200 0x105>, + <0xff10600c 0x1>, + <0xfe001018 0x1>; + reg-names = "mbox", + "sp_iccm", + "mbox_irq", + "cpuctrl", + "a6it_int_force"; + interrupt-parent = <&tb10x_ictl>; + interrupts = <20 1>, <19 1>; + interrupt-names = "cmd_irq", "event_irq"; + }; + tb10x_mdsc0: tb10x-mdscr@FF300000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xFF300000 0x7000>; + tb100-mdscr-manage-tsin; + }; + tb10x_mscr0: tb10x-mdscr@FF307000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xFF307000 0x7000>; + }; + tb10x_scr0: tb10x-mdscr@ff30e000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xFF30e000 0x4000>; + tb100-mdscr-manage-tsin; + }; + tb10x_scr1: tb10x-mdscr@ff312000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xFF312000 0x4000>; + tb100-mdscr-manage-tsin; + }; + tb10x_wfb: tb10x-wfb@ff319000 { + compatible = "abilis,tb100-wfb"; + reg = <0xff319000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <16 1>; + }; + }; +}; diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts new file mode 100644 index 0000000000000000000000000000000000000000..ea16d782af58f5eb054d58b03c24cc033126dde0 --- /dev/null +++ b/arch/arc/boot/dts/nsimosci.dts @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + compatible = "snps,nsimosci"; + clock-frequency = <80000000>; /* 80 MHZ */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + chosen { + bootargs = "console=tty0 consoleblank=0"; + }; + + aliases { + serial0 = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256M */ + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* child and parent address space 1:1 mapped */ + ranges; + + intc: interrupt-controller { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart0: serial@c0000000 { + compatible = "snps,dw-apb-uart"; + reg = <0xc0000000 0x2000>; + interrupts = <11>; + #clock-frequency = <80000000>; + clock-frequency = <3686400>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + status = "okay"; + }; + + pgu0: pgu@c9000000 { + compatible = "snps,arcpgufb"; + reg = <0xc9000000 0x400>; + }; + + ps2: ps2@c9001000 { + compatible = "snps,arc_ps2"; + reg = <0xc9000400 0x14>; + interrupts = <13>; + interrupt-names = "arc_ps2_irq"; + }; + + eth0: ethernet@c0003000 { + compatible = "snps,oscilan"; + reg = <0xc0003000 0x44>; + interrupts = <7>, <8>; + interrupt-names = "rx", "tx"; + }; + }; +}; diff --git a/arch/arc/configs/fpga_defconfig b/arch/arc/configs/fpga_defconfig index b8698067ebbe72580f13c72d211816c1fafba606..95350be6ef6f5cd96685878ab081f320eafd3bd8 100644 --- a/arch/arc/configs/fpga_defconfig +++ b/arch/arc/configs/fpga_defconfig @@ -9,7 +9,7 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs" +CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y # CONFIG_SLUB_DEBUG is not set @@ -24,6 +24,7 @@ CONFIG_ARC_PLAT_FPGA_LEGACY=y CONFIG_ARC_BOARD_ML509=y # CONFIG_ARC_HAS_RTSC is not set CONFIG_ARC_BUILTIN_DTB_NAME="angel4" +CONFIG_PREEMPT=y # CONFIG_COMPACTION is not set # CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_NET=y diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..446c96c24eff59f17678f5fcc8382e13ed69d4ba --- /dev/null +++ b/arch/arc/configs/nsimosci_defconfig @@ -0,0 +1,75 @@ +CONFIG_CROSS_COMPILE="arc-elf32-" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_DEFAULT_HOSTNAME="ARCLinux" +# CONFIG_SWAP is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="../arc_initramfs" +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_KPROBES=y +CONFIG_MODULES=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARC_PLAT_FPGA_LEGACY=y +CONFIG_ARC_BOARD_ML509=y +# CONFIG_ARC_IDE is not set +# CONFIG_ARCTANGENT_EMAC is not set +# CONFIG_ARC_HAS_RTSC is not set +CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci" +# CONFIG_COMPACTION is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y +CONFIG_NET_KEY=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_BLK_DEV is not set +CONFIG_NETDEVICES=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +# CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +CONFIG_MOUSE_PS2_TOUCHKIT=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_ARC_PS2=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_ARC=y +CONFIG_SERIAL_ARC_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_FB=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_XZ_DEC=y diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..4fa5cd9f22028bab678371baa14cf9f3ac0ce01d --- /dev/null +++ b/arch/arc/configs/tb10x_defconfig @@ -0,0 +1,117 @@ +CONFIG_CROSS_COMPILE="arc-elf32-" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_DEFAULT_HOSTNAME="tb10x" +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="../tb10x-rootfs.cpio" +CONFIG_INITRAMFS_ROOT_UID=2100 +CONFIG_INITRAMFS_ROOT_GID=501 +# CONFIG_RD_GZIP is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_AIO is not set +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLOCK is not set +CONFIG_ARC_PLAT_TB10X=y +CONFIG_ARC_CACHE_LINE_SHIFT=5 +# CONFIG_ARC_HAS_RTSC is not set +CONFIG_ARC_STACK_NONEXEC=y +CONFIG_HZ=250 +CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk" +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_COMPACTION is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_PROC_DEVICETREE=y +CONFIG_NETDEVICES=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_DEBUG_FS=y +CONFIG_STMMAC_DA=y +CONFIG_STMMAC_CHAINED=y +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_8250_DW=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_TRANSIENT=y +CONFIG_DMADEVICES=y +CONFIG_DW_DMAC=y +CONFIG_NET_DMA=y +CONFIG_ASYNC_TX_DMA=y +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y +CONFIG_HEADERS_CHECK=y +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h index 97ee96f265055b012cd763f0daf293e61e2c754d..ee1f6eae82d2f6afa9a85b78a19d06602e94f862 100644 --- a/arch/arc/include/asm/cacheflush.h +++ b/arch/arc/include/asm/cacheflush.h @@ -20,12 +20,20 @@ #include +/* + * Semantically we need this because icache doesn't snoop dcache/dma. + * However ARC Cache flush requires paddr as well as vaddr, latter not available + * in the flush_icache_page() API. So we no-op it but do the equivalent work + * in update_mmu_cache() + */ +#define flush_icache_page(vma, page) + void flush_cache_all(void); void flush_icache_range(unsigned long start, unsigned long end); -void flush_icache_page(struct vm_area_struct *vma, struct page *page); -void flush_icache_range_vaddr(unsigned long paddr, unsigned long u_vaddr, - int len); +void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len); +void __inv_icache_page(unsigned long paddr, unsigned long vaddr); +void __flush_dcache_page(unsigned long paddr); #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 @@ -58,7 +66,7 @@ void dma_cache_wback(unsigned long start, unsigned long sz); do { \ memcpy(dst, src, len); \ if (vma->vm_flags & VM_EXEC) \ - flush_icache_range_vaddr((unsigned long)(dst), vaddr, len);\ + __sync_icache_dcache((unsigned long)(dst), vaddr, len); \ } while (0) #define copy_from_user_page(vma, page, vaddr, dst, src, len) \ diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h index 4c588f9820cff65435f61aebbd00d5c351d160b7..57898a17eb8219ac20ec8cd5fb116f10702082e5 100644 --- a/arch/arc/include/asm/irq.h +++ b/arch/arc/include/asm/irq.h @@ -9,7 +9,8 @@ #ifndef __ASM_ARC_IRQ_H #define __ASM_ARC_IRQ_H -#define NR_IRQS 32 +#define NR_CPU_IRQS 32 /* number of interrupt lines of ARC770 CPU */ +#define NR_IRQS 128 /* allow some CPU external IRQ handling */ /* Platform Independent IRQs */ #define TIMER0_IRQ 3 diff --git a/arch/arc/include/asm/serial.h b/arch/arc/include/asm/serial.h index 4dff5a1e4128087c365f294158409dee438a76ac..602b0970a764b7e3aca7d6902f86106461f14c3f 100644 --- a/arch/arc/include/asm/serial.h +++ b/arch/arc/include/asm/serial.h @@ -22,4 +22,14 @@ #define BASE_BAUD (arc_get_core_freq() / 16) +/* + * This is definitely going to break early 8250 consoles on multi-platform + * images but hey, it won't add any code complexity for a debug feature of + * one broken driver. + */ +#ifdef CONFIG_ARC_PLAT_TB10X +#undef BASE_BAUD +#define BASE_BAUD (arc_get_core_freq() / 16 / 3) +#endif + #endif /* _ASM_ARC_SERIAL_H */ diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h index 3eb2ce0bdfa3e63e24ad38e8d94d675d9716b1a2..fe91719866a57fed68e5ddb53228e7fec61279b1 100644 --- a/arch/arc/include/asm/tlb.h +++ b/arch/arc/include/asm/tlb.h @@ -21,20 +21,28 @@ #ifndef __ASSEMBLY__ -#define tlb_flush(tlb) local_flush_tlb_mm((tlb)->mm) +#define tlb_flush(tlb) \ +do { \ + if (tlb->fullmm) \ + flush_tlb_mm((tlb)->mm); \ +} while (0) /* * This pair is called at time of munmap/exit to flush cache and TLB entries * for mappings being torn down. * 1) cache-flush part -implemented via tlb_start_vma( ) can be NOP (for now) * as we don't support aliasing configs in our VIPT D$. - * 2) tlb-flush part - implemted via tlb_end_vma( ) can be NOP as well- - * albiet for difft reasons - its better handled by moving to new ASID + * 2) tlb-flush part - implemted via tlb_end_vma( ) flushes the TLB range * * Note, read http://lkml.org/lkml/2004/1/15/6 */ #define tlb_start_vma(tlb, vma) -#define tlb_end_vma(tlb, vma) + +#define tlb_end_vma(tlb, vma) \ +do { \ + if (!tlb->fullmm) \ + flush_tlb_range(vma, vma->vm_start, vma->vm_end); \ +} while (0) #define __tlb_remove_tlb_entry(tlb, ptep, address) diff --git a/arch/arc/kernel/asm-offsets.c b/arch/arc/kernel/asm-offsets.c index 0dc148ebce746c5ce814db5d105135a7e6a1ea73..7dcda70252411949b32f8b9b112c9e37bfec0edc 100644 --- a/arch/arc/kernel/asm-offsets.c +++ b/arch/arc/kernel/asm-offsets.c @@ -11,9 +11,9 @@ #include #include #include +#include #include #include -#include int main(void) { diff --git a/arch/arc/kernel/clk.c b/arch/arc/kernel/clk.c index 66ce0dc917fb3f8add4d1a605c6968a9c2c428c2..10c7b0b5a07983027e285375fe5ff57b14de4dfb 100644 --- a/arch/arc/kernel/clk.c +++ b/arch/arc/kernel/clk.c @@ -8,7 +8,7 @@ #include -unsigned long core_freq = 800000000; +unsigned long core_freq = 80000000; /* * As of now we default to device-tree provided clock diff --git a/arch/arc/kernel/disasm.c b/arch/arc/kernel/disasm.c index d14764ae2c6068f7f8c6b2459233e9751901570f..b8a549c4f54071f97d26c473a9dca532e1db8b41 100644 --- a/arch/arc/kernel/disasm.c +++ b/arch/arc/kernel/disasm.c @@ -12,8 +12,8 @@ #include #include #include +#include #include -#include #if defined(CONFIG_KGDB) || defined(CONFIG_ARC_MISALIGN_ACCESS) || \ defined(CONFIG_KPROBES) diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S index 91eeab81f52d3d66a408a215f06b4ff19022d364..0c6d664d4a8379512c32c7b52d8fbd0d321cf70e 100644 --- a/arch/arc/kernel/entry.S +++ b/arch/arc/kernel/entry.S @@ -393,12 +393,14 @@ ARC_ENTRY EV_TLBProtV #ifdef CONFIG_ARC_MISALIGN_ACCESS SAVE_CALLEE_SAVED_USER mov r3, sp ; callee_regs -#endif bl do_misaligned_access -#ifdef CONFIG_ARC_MISALIGN_ACCESS - DISCARD_CALLEE_SAVED_USER + ; TBD: optimize - do this only if a callee reg was involved + ; either a dst of emulated LD/ST or src with address-writeback + RESTORE_CALLEE_SAVED_USER +#else + bl do_misaligned_error #endif b ret_from_exception diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 551c10dff481387f5b9d89e6c09b937cb22760df..8115fa531575f0d46d6fb030aa05270f7c7d6983 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -11,6 +11,8 @@ #include #include #include +#include +#include "../../drivers/irqchip/irqchip.h" #include #include #include @@ -26,7 +28,7 @@ * -Disable all IRQs (on CPU side) * -Optionally, setup the High priority Interrupts as Level 2 IRQs */ -void __init arc_init_IRQ(void) +void __cpuinit arc_init_IRQ(void) { int level_mask = 0; @@ -97,15 +99,13 @@ static const struct irq_domain_ops arc_intc_domain_ops = { static struct irq_domain *root_domain; -void __init init_onchip_IRQ(void) +static int __init +init_onchip_IRQ(struct device_node *intc, struct device_node *parent) { - struct device_node *intc = NULL; + if (parent) + panic("DeviceTree incore intc not a root irq controller\n"); - intc = of_find_compatible_node(NULL, NULL, "snps,arc700-intc"); - if(!intc) - panic("DeviceTree Missing incore intc\n"); - - root_domain = irq_domain_add_legacy(intc, NR_IRQS, 0, 0, + root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0, &arc_intc_domain_ops, NULL); if (!root_domain) @@ -113,8 +113,12 @@ void __init init_onchip_IRQ(void) /* with this we don't need to export root_domain */ irq_set_default_host(root_domain); + + return 0; } +IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ); + /* * Late Interrupt system init called from start_kernel for Boot CPU only * @@ -123,12 +127,13 @@ void __init init_onchip_IRQ(void) */ void __init init_IRQ(void) { - init_onchip_IRQ(); - /* Any external intc can be setup here */ if (machine_desc->init_irq) machine_desc->init_irq(); + /* process the entire interrupt tree in one go */ + irqchip_init(); + #ifdef CONFIG_SMP /* Master CPU can initialize it's side of IPI */ if (machine_desc->init_smp) diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c index 3bfeacb674de94db85fccd7844fb1dddadc3ab7e..5a7b80e2d883127bebd85d598142e352f1b928ef 100644 --- a/arch/arc/kernel/kprobes.c +++ b/arch/arc/kernel/kprobes.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arc/kernel/module.c b/arch/arc/kernel/module.c index cdd359352c0a713a88c151db6091ae1738899256..376e04622962b37917dd8681a9ce9e0cb7d0224a 100644 --- a/arch/arc/kernel/module.c +++ b/arch/arc/kernel/module.c @@ -47,7 +47,7 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, } } #endif - return 0; + return 0; } void module_arch_cleanup(struct module *mod) @@ -141,5 +141,5 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, mod->arch.unw_info = unw; } #endif - return 0; + return 0; } diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index 2d95ac07df7bde15169ff5058d7e53afd2f2d73e..b2b3731dd1e9c65638b69cd5402382ab2bbb275c 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -14,14 +14,13 @@ #include #include #include +#include #include #include #include -#include #include #include #include -#include #include #include #include @@ -32,14 +31,14 @@ int running_on_hw = 1; /* vs. on ISS */ char __initdata command_line[COMMAND_LINE_SIZE]; -struct machine_desc *machine_desc __initdata; +struct machine_desc *machine_desc __cpuinitdata; struct task_struct *_current_task[NR_CPUS]; /* For stack switching */ struct cpuinfo_arc cpuinfo_arc700[NR_CPUS]; -void __init read_arc_build_cfg_regs(void) +void __cpuinit read_arc_build_cfg_regs(void) { struct bcr_perip uncached_space; struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; @@ -238,7 +237,7 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len) return buf; } -void __init arc_chk_ccms(void) +void __cpuinit arc_chk_ccms(void) { #if defined(CONFIG_ARC_HAS_DCCM) || defined(CONFIG_ARC_HAS_ICCM) struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; @@ -273,7 +272,7 @@ void __init arc_chk_ccms(void) * hardware has dedicated regs which need to be saved/restored on ctx-sw * (Single Precision uses core regs), thus kernel is kind of oblivious to it */ -void __init arc_chk_fpu(void) +void __cpuinit arc_chk_fpu(void) { struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; @@ -294,7 +293,7 @@ void __init arc_chk_fpu(void) * such as only for boot CPU etc */ -void __init setup_processor(void) +void __cpuinit setup_processor(void) { char str[512]; int cpu_id = smp_processor_id(); @@ -319,23 +318,20 @@ void __init setup_processor(void) void __init setup_arch(char **cmdline_p) { + /* This also populates @boot_command_line from /bootargs */ + machine_desc = setup_machine_fdt(__dtb_start); + if (!machine_desc) + panic("Embedded DT invalid\n"); + + /* Append any u-boot provided cmdline */ #ifdef CONFIG_CMDLINE_UBOOT - /* Make sure that a whitespace is inserted before */ - strlcat(command_line, " ", sizeof(command_line)); + /* Add a whitespace seperator between the 2 cmdlines */ + strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); + strlcat(boot_command_line, command_line, COMMAND_LINE_SIZE); #endif - /* - * Append .config cmdline to base command line, which might already - * contain u-boot "bootargs" (handled by head.S, if so configured) - */ - strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line)); /* Save unparsed command line copy for /proc/cmdline */ - strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); - *cmdline_p = command_line; - - machine_desc = setup_machine_fdt(__dtb_start); - if (!machine_desc) - panic("Embedded DT invalid\n"); + *cmdline_p = boot_command_line; /* To force early parsing of things like mem=xxx */ parse_early_param(); diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index f13f72807aa5f7da777b082f325471a84b828768..09f4309aa2c035332153cd5c6b9734fd2262d95b 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c index 7496995371e813738725bac8bb68f40c843d476f..0471d9c9dd5448638593409f80a7823746761d02 100644 --- a/arch/arc/kernel/traps.c +++ b/arch/arc/kernel/traps.c @@ -16,11 +16,12 @@ #include #include #include -#include +#include +#include +#include #include -#include #include -#include +#include void __init trap_init(void) { @@ -83,6 +84,7 @@ DO_ERROR_INFO(SIGILL, "Invalid Extn Insn", do_extension_fault, ILL_ILLOPC) DO_ERROR_INFO(SIGILL, "Illegal Insn (or Seq)", insterror_is_error, ILL_ILLOPC) DO_ERROR_INFO(SIGBUS, "Invalid Mem Access", do_memory_error, BUS_ADRERR) DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT) +DO_ERROR_INFO(SIGBUS, "Misaligned Access", do_misaligned_error, BUS_ADRALN) #ifdef CONFIG_ARC_MISALIGN_ACCESS /* @@ -91,21 +93,11 @@ DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT) int do_misaligned_access(unsigned long cause, unsigned long address, struct pt_regs *regs, struct callee_regs *cregs) { - if (misaligned_fixup(address, regs, cause, cregs) != 0) { - siginfo_t info; - - info.si_signo = SIGBUS; - info.si_errno = 0; - info.si_code = BUS_ADRALN; - info.si_addr = (void __user *)address; - return handle_exception(cause, "Misaligned Access", regs, - &info); - } + if (misaligned_fixup(address, regs, cause, cregs) != 0) + return do_misaligned_error(cause, address, regs); + return 0; } - -#else -DO_ERROR_INFO(SIGSEGV, "Misaligned Access", do_misaligned_access, SEGV_ACCERR) #endif /* diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c index 0aec01985bf99feda33dc44dc7262eb581f81c6e..11c301b81c92bfb7def6577a869c4e0f2c0432a3 100644 --- a/arch/arc/kernel/troubleshoot.c +++ b/arch/arc/kernel/troubleshoot.c @@ -26,7 +26,6 @@ static noinline void print_reg_file(long *reg_rev, int start_num) char buf[512]; int n = 0, len = sizeof(buf); - /* weird loop because pt_regs regs rev r12..r0, r25..r13 */ for (i = start_num; i < start_num + 13; i++) { n += scnprintf(buf + n, len - n, "r%02u: 0x%08lx\t", i, (unsigned long)*reg_rev); @@ -34,13 +33,18 @@ static noinline void print_reg_file(long *reg_rev, int start_num) if (((i + 1) % 3) == 0) n += scnprintf(buf + n, len - n, "\n"); + /* because pt_regs has regs reversed: r12..r0, r25..r13 */ reg_rev--; } if (start_num != 0) n += scnprintf(buf + n, len - n, "\n\n"); - pr_info("%s", buf); + /* To continue printing callee regs on same line as scratch regs */ + if (start_num == 0) + pr_info("%s", buf); + else + pr_cont("%s\n", buf); } static void show_callee_regs(struct callee_regs *cregs) @@ -83,6 +87,10 @@ static void show_faulting_vma(unsigned long address, char *buf) dev_t dev = 0; char *nm = buf; + /* can't use print_vma_addr() yet as it doesn't check for + * non-inclusive vma + */ + vma = find_vma(current->active_mm, address); /* check against the find_vma( ) behaviour which returns the next VMA @@ -98,10 +106,13 @@ static void show_faulting_vma(unsigned long address, char *buf) ino = inode->i_ino; } pr_info(" @off 0x%lx in [%s]\n" - " VMA: 0x%08lx to 0x%08lx\n\n", - address - vma->vm_start, nm, vma->vm_start, vma->vm_end); - } else + " VMA: 0x%08lx to 0x%08lx\n", + vma->vm_start < TASK_UNMAPPED_BASE ? + address : address - vma->vm_start, + nm, vma->vm_start, vma->vm_end); + } else { pr_info(" @No matching VMA found\n"); + } } static void show_ecr_verbose(struct pt_regs *regs) @@ -110,7 +121,7 @@ static void show_ecr_verbose(struct pt_regs *regs) unsigned long address; cause_reg = current->thread.cause_code; - pr_info("\n[ECR]: 0x%08x => ", cause_reg); + pr_info("\n[ECR ]: 0x%08x => ", cause_reg); /* For Data fault, this is data address not instruction addr */ address = current->thread.fault_address; @@ -120,7 +131,7 @@ static void show_ecr_verbose(struct pt_regs *regs) /* For DTLB Miss or ProtV, display the memory involved too */ if (vec == ECR_V_DTLB_MISS) { - pr_cont("Invalid (%s) @ 0x%08lx by insn @ 0x%08lx\n", + pr_cont("Invalid %s 0x%08lx by insn @ 0x%08lx\n", (cause_code == 0x01) ? "Read From" : ((cause_code == 0x02) ? "Write to" : "EX"), address, regs->ret); @@ -168,20 +179,23 @@ void show_regs(struct pt_regs *regs) if (current->thread.cause_code) show_ecr_verbose(regs); - pr_info("[EFA]: 0x%08lx\n", current->thread.fault_address); - pr_info("[ERET]: 0x%08lx (PC of Faulting Instr)\n", regs->ret); + pr_info("[EFA ]: 0x%08lx\n[BLINK ]: %pS\n[ERET ]: %pS\n", + current->thread.fault_address, + (void *)regs->blink, (void *)regs->ret); - show_faulting_vma(regs->ret, buf); /* faulting code, not data */ + if (user_mode(regs)) + show_faulting_vma(regs->ret, buf); /* faulting code, not data */ - /* can't use print_vma_addr() yet as it doesn't check for - * non-inclusive vma - */ + pr_info("[STAT32]: 0x%08lx", regs->status32); + +#define STS_BIT(r, bit) r->status32 & STATUS_##bit##_MASK ? #bit : "" + if (!user_mode(regs)) + pr_cont(" : %2s %2s %2s %2s %2s\n", + STS_BIT(regs, AE), STS_BIT(regs, A2), STS_BIT(regs, A1), + STS_BIT(regs, E2), STS_BIT(regs, E1)); - /* print special regs */ - pr_info("status32: 0x%08lx\n", regs->status32); - pr_info(" SP: 0x%08lx\tFP: 0x%08lx\n", regs->sp, regs->fp); - pr_info("BTA: 0x%08lx\tBLINK: 0x%08lx\n", - regs->bta, regs->blink); + pr_info("BTA: 0x%08lx\t SP: 0x%08lx\t FP: 0x%08lx\n", + regs->bta, regs->sp, regs->fp); pr_info("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n", regs->lp_start, regs->lp_end, regs->lp_count); diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 88d617d84234ea5e5815dd1d61ef165f969995ab..c854cf95f70666669dcff0eec6006bbbe788bab0 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -72,16 +72,6 @@ #include #include - -#ifdef CONFIG_ARC_HAS_ICACHE -static void __ic_line_inv_no_alias(unsigned long, int); -static void __ic_line_inv_2_alias(unsigned long, int); -static void __ic_line_inv_4_alias(unsigned long, int); - -/* Holds the ptr to flush routine, dependign on size due to aliasing issues */ -static void (*___flush_icache_rtn) (unsigned long, int); -#endif - char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len) { int n = 0; @@ -109,7 +99,7 @@ char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len) * the cpuinfo structure for later use. * No Validation done here, simply read/convert the BCRs */ -void __init read_decode_cache_bcr(void) +void __cpuinit read_decode_cache_bcr(void) { struct bcr_cache ibcr, dbcr; struct cpuinfo_arc_cache *p_ic, *p_dc; @@ -141,7 +131,7 @@ void __init read_decode_cache_bcr(void) * 3. Enable the Caches, setup default flush mode for D-Cache * 3. Calculate the SHMLBA used by user space */ -void __init arc_cache_init(void) +void __cpuinit arc_cache_init(void) { unsigned int temp; unsigned int cpu = smp_processor_id(); @@ -171,30 +161,6 @@ void __init arc_cache_init(void) } #endif - - /* - * if Cache way size is <= page size then no aliasing exhibited - * otherwise ratio determines num of aliases. - * e.g. 32K I$, 2 way set assoc, 8k pg size - * way-sz = 32k/2 = 16k - * way-pg-ratio = 16k/8k = 2, so 2 aliases possible - * (meaning 1 line could be in 2 possible locations). - */ - way_pg_ratio = ic->sz / ARC_ICACHE_WAYS / PAGE_SIZE; - switch (way_pg_ratio) { - case 0: - case 1: - ___flush_icache_rtn = __ic_line_inv_no_alias; - break; - case 2: - ___flush_icache_rtn = __ic_line_inv_2_alias; - break; - case 4: - ___flush_icache_rtn = __ic_line_inv_4_alias; - break; - default: - panic("Unsupported I-Cache Sz\n"); - } #endif /* Enable/disable I-Cache */ @@ -391,75 +357,38 @@ static inline void __dc_line_op(unsigned long start, unsigned long sz, /* * I-Cache Aliasing in ARC700 VIPT caches * - * For fetching code from I$, ARC700 uses vaddr (embedded in program code) - * to "index" into SET of cache-line and paddr from MMU to match the TAG - * in the WAYS of SET. + * ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag. + * The orig Cache Management Module "CDU" only required paddr to invalidate a + * certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry. + * Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching + * the exact same line. * - * However the CDU iterface (to flush/inv) lines from software, only takes - * paddr (to have simpler hardware interface). For simpler cases, using paddr - * alone suffices. - * e.g. 2-way-set-assoc, 16K I$ (8k MMU pg sz, 32b cache line size): - * way_sz = cache_sz / num_ways = 16k/2 = 8k - * num_sets = way_sz / line_sz = 8k/32 = 256 => 8 bits - * Ignoring the bottom 5 bits corresp to the off within a 32b cacheline, - * bits req for calc set-index = bits 12:5 (0 based). Since this range fits - * inside the bottom 13 bits of paddr, which are same for vaddr and paddr - * (with 8k pg sz), paddr alone can be safely used by CDU to unambigously - * locate a cache-line. - * - * However for a difft sized cache, say 32k I$, above math yields need - * for 14 bits of vaddr to locate a cache line, which can't be provided by - * paddr, since the bit 13 (0 based) might differ between the two. - * - * This lack of extra bits needed for correct line addressing, defines the - * classical problem of Cache aliasing with VIPT architectures - * num_aliases = 1 << extra_bits - * e.g. 2-way-set-assoc, 32K I$ with 8k MMU pg sz => 2 aliases - * 2-way-set-assoc, 64K I$ with 8k MMU pg sz => 4 aliases - * 2-way-set-assoc, 16K I$ with 8k MMU pg sz => NO aliases + * However for larger Caches (way-size > page-size) - i.e. in Aliasing config, + * paddr alone could not be used to correctly index the cache. * * ------------------ * MMU v1/v2 (Fixed Page Size 8k) * ------------------ * The solution was to provide CDU with these additonal vaddr bits. These - * would be bits [x:13], x would depend on cache-geom. + * would be bits [x:13], x would depend on cache-geometry, 13 comes from + * standard page size of 8k. * H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits * of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the * orig 5 bits of paddr were anyways ignored by CDU line ops, as they * represent the offset within cache-line. The adv of using this "clumsy" - * interface for additional info was no new reg was needed in CDU. + * interface for additional info was no new reg was needed in CDU programming + * model. * * 17:13 represented the max num of bits passable, actual bits needed were * fewer, based on the num-of-aliases possible. * -for 2 alias possibility, only bit 13 needed (32K cache) * -for 4 alias possibility, bits 14:13 needed (64K cache) * - * Since vaddr was not available for all instances of I$ flush req by core - * kernel, the only safe way (non-optimal though) was to kill all possible - * lines which could represent an alias (even if they didnt represent one - * in execution). - * e.g. for 64K I$, 4 aliases possible, so we did - * flush start - * flush start | 0x01 - * flush start | 0x2 - * flush start | 0x3 - * - * The penalty was invoking the operation itself, since tag match is anyways - * paddr based, a line which didn't represent an alias would not match the - * paddr, hence wont be killed - * - * Note that aliasing concerns are independent of line-sz for a given cache - * geometry (size + set_assoc) because the extra bits required by line-sz are - * reduced from the set calc. - * e.g. 2-way-set-assoc, 32K I$ with 8k MMU pg sz and using math above - * 32b line-sz: 9 bits set-index-calc, 5 bits offset-in-line => 1 extra bit - * 64b line-sz: 8 bits set-index-calc, 6 bits offset-in-line => 1 extra bit - * * ------------------ * MMU v3 * ------------------ - * This ver of MMU supports var page sizes (1k-16k) - Linux will support - * 8k (default), 16k and 4k. + * This ver of MMU supports variable page sizes (1k-16k): although Linux will + * only support 8k (default), 16k and 4k. * However from hardware perspective, smaller page sizes aggrevate aliasing * meaning more vaddr bits needed to disambiguate the cache-line-op ; * the existing scheme of piggybacking won't work for certain configurations. @@ -468,115 +397,29 @@ static inline void __dc_line_op(unsigned long start, unsigned long sz, */ /*********************************************************** - * Machine specific helpers for per line I-Cache invalidate. - * 3 routines to accpunt for 1, 2, 4 aliases possible + * Machine specific helper for per line I-Cache invalidate. */ - -static void __ic_line_inv_no_alias(unsigned long start, int num_lines) -{ - while (num_lines-- > 0) { -#if (CONFIG_ARC_MMU_VER > 2) - write_aux_reg(ARC_REG_IC_PTAG, start); -#endif - write_aux_reg(ARC_REG_IC_IVIL, start); - start += ARC_ICACHE_LINE_LEN; - } -} - -static void __ic_line_inv_2_alias(unsigned long start, int num_lines) -{ - while (num_lines-- > 0) { - -#if (CONFIG_ARC_MMU_VER > 2) - /* - * MMU v3, CDU prog model (for line ops) now uses a new IC_PTAG - * reg to pass the "tag" bits and existing IVIL reg only looks - * at bits relevant for "index" (details above) - * Programming Notes: - * -when writing tag to PTAG reg, bit chopping can be avoided, - * CDU ignores non-tag bits. - * -Ideally "index" must be computed from vaddr, but it is not - * avail in these rtns. So to be safe, we kill the lines in all - * possible indexes corresp to num of aliases possible for - * given cache config. - */ - write_aux_reg(ARC_REG_IC_PTAG, start); - write_aux_reg(ARC_REG_IC_IVIL, - start & ~(0x1 << PAGE_SHIFT)); - write_aux_reg(ARC_REG_IC_IVIL, start | (0x1 << PAGE_SHIFT)); -#else - write_aux_reg(ARC_REG_IC_IVIL, start); - write_aux_reg(ARC_REG_IC_IVIL, start | 0x01); -#endif - start += ARC_ICACHE_LINE_LEN; - } -} - -static void __ic_line_inv_4_alias(unsigned long start, int num_lines) -{ - while (num_lines-- > 0) { - -#if (CONFIG_ARC_MMU_VER > 2) - write_aux_reg(ARC_REG_IC_PTAG, start); - - write_aux_reg(ARC_REG_IC_IVIL, - start & ~(0x3 << PAGE_SHIFT)); - write_aux_reg(ARC_REG_IC_IVIL, - start & ~(0x2 << PAGE_SHIFT)); - write_aux_reg(ARC_REG_IC_IVIL, - start & ~(0x1 << PAGE_SHIFT)); - write_aux_reg(ARC_REG_IC_IVIL, start | (0x3 << PAGE_SHIFT)); -#else - write_aux_reg(ARC_REG_IC_IVIL, start); - write_aux_reg(ARC_REG_IC_IVIL, start | 0x01); - write_aux_reg(ARC_REG_IC_IVIL, start | 0x02); - write_aux_reg(ARC_REG_IC_IVIL, start | 0x03); -#endif - start += ARC_ICACHE_LINE_LEN; - } -} - -static void __ic_line_inv(unsigned long start, unsigned long sz) +static void __ic_line_inv_vaddr(unsigned long phy_start, unsigned long vaddr, + unsigned long sz) { unsigned long flags; int num_lines, slack; + unsigned int addr; /* - * Ensure we properly floor/ceil the non-line aligned/sized requests - * and have @start - aligned to cache line, and integral @num_lines + * Ensure we properly floor/ceil the non-line aligned/sized requests: * However page sized flushes can be compile time optimised. - * -@start will be cache-line aligned already (being page aligned) + * -@phy_start will be cache-line aligned already (being page aligned) * -@sz will be integral multiple of line size (being page sized). */ if (!(__builtin_constant_p(sz) && sz == PAGE_SIZE)) { - slack = start & ~ICACHE_LINE_MASK; + slack = phy_start & ~ICACHE_LINE_MASK; sz += slack; - start -= slack; + phy_start -= slack; } num_lines = DIV_ROUND_UP(sz, ARC_ICACHE_LINE_LEN); - local_irq_save(flags); - (*___flush_icache_rtn) (start, num_lines); - local_irq_restore(flags); -} - -/* Unlike routines above, having vaddr for flush op (along with paddr), - * prevents the need to speculatively kill the lines in multiple sets - * based on ratio of way_sz : pg_sz - */ -static void __ic_line_inv_vaddr(unsigned long phy_start, - unsigned long vaddr, unsigned long sz) -{ - unsigned long flags; - int num_lines, slack; - unsigned int addr; - - slack = phy_start & ~ICACHE_LINE_MASK; - sz += slack; - phy_start -= slack; - num_lines = DIV_ROUND_UP(sz, ARC_ICACHE_LINE_LEN); - #if (CONFIG_ARC_MMU_VER > 2) vaddr &= ~ICACHE_LINE_MASK; addr = phy_start; @@ -595,7 +438,7 @@ static void __ic_line_inv_vaddr(unsigned long phy_start, write_aux_reg(ARC_REG_IC_IVIL, vaddr); vaddr += ARC_ICACHE_LINE_LEN; #else - /* this paddr contains vaddrs bits as needed */ + /* paddr contains stuffed vaddrs bits */ write_aux_reg(ARC_REG_IC_IVIL, addr); #endif addr += ARC_ICACHE_LINE_LEN; @@ -605,7 +448,6 @@ static void __ic_line_inv_vaddr(unsigned long phy_start, #else -#define __ic_line_inv(start, sz) #define __ic_line_inv_vaddr(pstart, vstart, sz) #endif /* CONFIG_ARC_HAS_ICACHE */ @@ -615,10 +457,10 @@ static void __ic_line_inv_vaddr(unsigned long phy_start, * Exported APIs */ -/* TBD: use pg_arch_1 to optimize this */ void flush_dcache_page(struct page *page) { - __dc_line_op((unsigned long)page_address(page), PAGE_SIZE, OP_FLUSH); + /* Make a note that dcache is not yet flushed for this page */ + set_bit(PG_arch_1, &page->flags); } EXPORT_SYMBOL(flush_dcache_page); @@ -642,8 +484,8 @@ void dma_cache_wback(unsigned long start, unsigned long sz) EXPORT_SYMBOL(dma_cache_wback); /* - * This is API for making I/D Caches consistent when modifying code - * (loadable modules, kprobes, etc) + * This is API for making I/D Caches consistent when modifying + * kernel code (loadable modules, kprobes, kgdb...) * This is called on insmod, with kernel virtual address for CODE of * the module. ARC cache maintenance ops require PHY address thus we * need to convert vmalloc addr to PHY addr @@ -652,7 +494,6 @@ void flush_icache_range(unsigned long kstart, unsigned long kend) { unsigned int tot_sz, off, sz; unsigned long phy, pfn; - unsigned long flags; /* printk("Kernel Cache Cohenercy: %lx to %lx\n",kstart, kend); */ @@ -673,8 +514,13 @@ void flush_icache_range(unsigned long kstart, unsigned long kend) /* Case: Kernel Phy addr (0x8000_0000 onwards) */ if (likely(kstart > PAGE_OFFSET)) { - __ic_line_inv(kstart, kend - kstart); - __dc_line_op(kstart, kend - kstart, OP_FLUSH); + /* + * The 2nd arg despite being paddr will be used to index icache + * This is OK since no alternate virtual mappings will exist + * given the callers for this case: kprobe/kgdb in built-in + * kernel code only. + */ + __sync_icache_dcache(kstart, kstart, kend - kstart); return; } @@ -692,42 +538,41 @@ void flush_icache_range(unsigned long kstart, unsigned long kend) pfn = vmalloc_to_pfn((void *)kstart); phy = (pfn << PAGE_SHIFT) + off; sz = min_t(unsigned int, tot_sz, PAGE_SIZE - off); - local_irq_save(flags); - __dc_line_op(phy, sz, OP_FLUSH); - __ic_line_inv(phy, sz); - local_irq_restore(flags); + __sync_icache_dcache(phy, kstart, sz); kstart += sz; tot_sz -= sz; } } /* - * Optimised ver of flush_icache_range() with spec callers: ptrace/signals - * where vaddr is also available. This allows passing both vaddr and paddr - * bits to CDU for cache flush, short-circuting the current pessimistic algo - * which kills all possible aliases. - * An added adv of knowing that vaddr is user-vaddr avoids various checks - * and handling for k-vaddr, k-paddr as done in orig ver above + * General purpose helper to make I and D cache lines consistent. + * @paddr is phy addr of region + * @vaddr is typically user or kernel vaddr (vmalloc) + * Howver in one instance, flush_icache_range() by kprobe (for a breakpt in + * builtin kernel code) @vaddr will be paddr only, meaning CDU operation will + * use a paddr to index the cache (despite VIPT). This is fine since since a + * built-in kernel page will not have any virtual mappings (not even kernel) + * kprobe on loadable module is different as it will have kvaddr. */ -void flush_icache_range_vaddr(unsigned long paddr, unsigned long u_vaddr, - int len) +void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len) { - __ic_line_inv_vaddr(paddr, u_vaddr, len); + unsigned long flags; + + local_irq_save(flags); + __ic_line_inv_vaddr(paddr, vaddr, len); __dc_line_op(paddr, len, OP_FLUSH); + local_irq_restore(flags); } -/* - * XXX: This also needs to be optim using pg_arch_1 - * This is called when a page-cache page is about to be mapped into a - * user process' address space. It offers an opportunity for a - * port to ensure d-cache/i-cache coherency if necessary. - */ -void flush_icache_page(struct vm_area_struct *vma, struct page *page) +/* wrapper to compile time eliminate alignment checks in flush loop */ +void __inv_icache_page(unsigned long paddr, unsigned long vaddr) { - if (!(vma->vm_flags & VM_EXEC)) - return; + __ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE); +} - __ic_line_inv((unsigned long)page_address(page), PAGE_SIZE); +void __flush_dcache_page(unsigned long paddr) +{ + __dc_line_op(paddr, PAGE_SIZE, OP_FLUSH_N_INV); } void flush_icache_all(void) diff --git a/arch/arc/mm/extable.c b/arch/arc/mm/extable.c index 014172ba843268c7861ff0600a4c268ee3775cc8..aa652e28132407d5d6b0757cd8f81a96079da597 100644 --- a/arch/arc/mm/extable.c +++ b/arch/arc/mm/extable.c @@ -27,7 +27,7 @@ int fixup_exception(struct pt_regs *regs) #ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE -long arc_copy_from_user_noinline(void *to, const void __user * from, +long arc_copy_from_user_noinline(void *to, const void __user *from, unsigned long n) { return __arc_copy_from_user(to, from, n); @@ -48,7 +48,7 @@ unsigned long arc_clear_user_noinline(void __user *to, } EXPORT_SYMBOL(arc_clear_user_noinline); -long arc_strncpy_from_user_noinline (char *dst, const char __user *src, +long arc_strncpy_from_user_noinline(char *dst, const char __user *src, long count) { return __arc_strncpy_from_user(dst, src, count); diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c index af55aab803d26899f717b9a50e1562e7e033c2f0..689ffd86d5e9d3dc786ac60e8bee1dab9ce7af8c 100644 --- a/arch/arc/mm/fault.c +++ b/arch/arc/mm/fault.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index 727d4794ea0fa7167e8901743e45d69cda66c76e..4a177365b2c42a94abe000ec4d9de016e7f48abb 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -10,9 +10,6 @@ #include #include #include -#ifdef CONFIG_BLOCK_DEV_RAM -#include -#endif #include #include #include diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c index 3e5c92c79936f302fec7df189dea3796ba7b37c4..739e65f355deac569d68e6fa6bff3d18bce73e3a 100644 --- a/arch/arc/mm/ioremap.c +++ b/arch/arc/mm/ioremap.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include void __iomem *ioremap(unsigned long paddr, unsigned long size) { diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 9b9ce23f4ec3b9a012a578794341583251dbf778..003d69ac6ffa63935a7bedf1089b61e238ff7a12 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -418,23 +418,37 @@ void create_tlb(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) local_irq_restore(flags); } -/* arch hook called by core VM at the end of handle_mm_fault( ), - * when a new PTE is entered in Page Tables or an existing one - * is modified. We aggresively pre-install a TLB entry +/* + * Called at the end of pagefault, for a userspace mapped page + * -pre-install the corresponding TLB entry into MMU + * -Finalize the delayed D-cache flush (wback+inv kernel mapping) */ - -void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddress, +void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned, pte_t *ptep) { + unsigned long vaddr = vaddr_unaligned & PAGE_MASK; + + create_tlb(vma, vaddr, ptep); - create_tlb(vma, vaddress, ptep); + /* icache doesn't snoop dcache, thus needs to be made coherent here */ + if (vma->vm_flags & VM_EXEC) { + struct page *page = pfn_to_page(pte_pfn(*ptep)); + + /* if page was dcache dirty, flush now */ + int dirty = test_and_clear_bit(PG_arch_1, &page->flags); + if (dirty) { + unsigned long paddr = pte_val(*ptep) & PAGE_MASK; + __flush_dcache_page(paddr); + __inv_icache_page(paddr, vaddr); + } + } } /* Read the Cache Build Confuration Registers, Decode them and save into * the cpuinfo structure for later use. * No Validation is done here, simply read/convert the BCRs */ -void __init read_decode_mmu_bcr(void) +void __cpuinit read_decode_mmu_bcr(void) { unsigned int tmp; struct bcr_mmu_1_2 *mmu2; /* encoded MMU2 attr */ @@ -466,7 +480,7 @@ void __init read_decode_mmu_bcr(void) char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len) { int n = 0; - struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[smp_processor_id()].mmu; + struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[cpu_id].mmu; n += scnprintf(buf + n, len - n, "ARC700 MMU [v%x]\t: %dk PAGE, ", p_mmu->ver, TO_KB(p_mmu->pg_sz)); @@ -480,7 +494,7 @@ char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len) return buf; } -void __init arc_mmu_init(void) +void __cpuinit arc_mmu_init(void) { char str[256]; struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu; diff --git a/arch/arc/plat-arcfpga/platform.c b/arch/arc/plat-arcfpga/platform.c index 4e20a1a5104d0196fff53f666780b48ad19919e2..b3700c064c0670ab0d799c2401432a4d35962728 100644 --- a/arch/arc/plat-arcfpga/platform.c +++ b/arch/arc/plat-arcfpga/platform.c @@ -224,3 +224,15 @@ MACHINE_START(ML509, "ml509") .init_smp = iss_model_init_smp, #endif MACHINE_END + +static const char *nsimosci_compat[] __initdata = { + "snps,nsimosci", + NULL, +}; + +MACHINE_START(NSIMOSCI, "nsimosci") + .dt_compat = nsimosci_compat, + .init_early = NULL, + .init_machine = plat_fpga_populate_dev, + .init_irq = NULL, +MACHINE_END diff --git a/arch/arc/plat-tb10x/Kconfig b/arch/arc/plat-tb10x/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..4e121272c4e5418b86f1db7845713f904f428593 --- /dev/null +++ b/arch/arc/plat-tb10x/Kconfig @@ -0,0 +1,36 @@ +# Abilis Systems TB10x platform kernel configuration file +# +# Author: Christian Ruppert +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +menuconfig ARC_PLAT_TB10X + bool "Abilis TB10x" + select COMMON_CLK + select PINCTRL + select PINMUX + select ARCH_REQUIRE_GPIOLIB + help + Support for platforms based on the TB10x home media gateway SOC by + Abilis Systems. TB10x is based on the ARC700 CPU architecture. + Say Y if you are building a kernel for one of the SOCs in this + series (e.g. TB100 or TB101). If in doubt say N. + +if ARC_PLAT_TB10X + +config GENERIC_GPIO + def_bool y + +endif diff --git a/arch/arc/plat-tb10x/Makefile b/arch/arc/plat-tb10x/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..89611d25ef35c81b2b2737ac2ea77881dcc24669 --- /dev/null +++ b/arch/arc/plat-tb10x/Makefile @@ -0,0 +1,21 @@ +# Abilis Systems TB10x platform Makefile +# +# Author: Christian Ruppert +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +KBUILD_CFLAGS += -Iarch/arc/plat-tb10x/include + +obj-y += tb10x.o diff --git a/arch/arc/plat-tb10x/tb10x.c b/arch/arc/plat-tb10x/tb10x.c new file mode 100644 index 0000000000000000000000000000000000000000..d3567691c7e1259174a9b6db4cf65593c2fb7536 --- /dev/null +++ b/arch/arc/plat-tb10x/tb10x.c @@ -0,0 +1,71 @@ +/* + * Abilis Systems TB10x platform initialisation + * + * Copyright (C) Abilis Systems 2012 + * + * Author: Christian Ruppert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#include +#include +#include +#include + +#include + + +static void __init tb10x_platform_init(void) +{ + of_clk_init(NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void __init tb10x_platform_late_init(void) +{ + struct device_node *dn; + + /* + * Pinctrl documentation recommends setting up the iomux here for + * all modules which don't require control over the pins themselves. + * Modules which need this kind of assistance are compatible with + * "abilis,simple-pinctrl", i.e. we can easily iterate over them. + * TODO: Does this recommended method work cleanly with pins required + * by modules? + */ + for_each_compatible_node(dn, NULL, "abilis,simple-pinctrl") { + struct platform_device *pd = of_find_device_by_node(dn); + struct pinctrl *pctl; + + pctl = pinctrl_get_select(&pd->dev, "abilis,simple-default"); + if (IS_ERR(pctl)) { + int ret = PTR_ERR(pctl); + dev_err(&pd->dev, "Could not set up pinctrl: %d\n", + ret); + } + } +} + +static const char *tb10x_compat[] __initdata = { + "abilis,arc-tb10x", + NULL, +}; + +MACHINE_START(TB10x, "tb10x") + .dt_compat = tb10x_compat, + .init_machine = tb10x_platform_init, + .init_late = tb10x_platform_late_init, +MACHINE_END