提交 e1ea9158 编写于 作者: D Don Skidmore 提交者: Jeff Kirsher

ixgbe: add support functions to access thermal data

Some 82599 adapters contain thermal data that we can get to via
an i2c interface.  These functions provide support to get at that
data.  A following patch will export this data.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 69e1e019
...@@ -3604,3 +3604,174 @@ void ixgbe_clear_tx_pending(struct ixgbe_hw *hw) ...@@ -3604,3 +3604,174 @@ void ixgbe_clear_tx_pending(struct ixgbe_hw *hw)
IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext); IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
} }
static const u8 ixgbe_emc_temp_data[4] = {
IXGBE_EMC_INTERNAL_DATA,
IXGBE_EMC_DIODE1_DATA,
IXGBE_EMC_DIODE2_DATA,
IXGBE_EMC_DIODE3_DATA
};
static const u8 ixgbe_emc_therm_limit[4] = {
IXGBE_EMC_INTERNAL_THERM_LIMIT,
IXGBE_EMC_DIODE1_THERM_LIMIT,
IXGBE_EMC_DIODE2_THERM_LIMIT,
IXGBE_EMC_DIODE3_THERM_LIMIT
};
/**
* ixgbe_get_ets_data - Extracts the ETS bit data
* @hw: pointer to hardware structure
* @ets_cfg: extected ETS data
* @ets_offset: offset of ETS data
*
* Returns error code.
**/
static s32 ixgbe_get_ets_data(struct ixgbe_hw *hw, u16 *ets_cfg,
u16 *ets_offset)
{
s32 status = 0;
status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, ets_offset);
if (status)
goto out;
if ((*ets_offset == 0x0000) || (*ets_offset == 0xFFFF)) {
status = IXGBE_NOT_IMPLEMENTED;
goto out;
}
status = hw->eeprom.ops.read(hw, *ets_offset, ets_cfg);
if (status)
goto out;
if ((*ets_cfg & IXGBE_ETS_TYPE_MASK) != IXGBE_ETS_TYPE_EMC_SHIFTED) {
status = IXGBE_NOT_IMPLEMENTED;
goto out;
}
out:
return status;
}
/**
* ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
* @hw: pointer to hardware structure
*
* Returns the thermal sensor data structure
**/
s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw)
{
s32 status = 0;
u16 ets_offset;
u16 ets_cfg;
u16 ets_sensor;
u8 num_sensors;
u8 i;
struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
/* Only support thermal sensors attached to 82599 physical port 0 */
if ((hw->mac.type != ixgbe_mac_82599EB) ||
(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
status = IXGBE_NOT_IMPLEMENTED;
goto out;
}
status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset);
if (status)
goto out;
num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
if (num_sensors > IXGBE_MAX_SENSORS)
num_sensors = IXGBE_MAX_SENSORS;
for (i = 0; i < num_sensors; i++) {
u8 sensor_index;
u8 sensor_location;
status = hw->eeprom.ops.read(hw, (ets_offset + 1 + i),
&ets_sensor);
if (status)
goto out;
sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
IXGBE_ETS_DATA_INDEX_SHIFT);
sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
IXGBE_ETS_DATA_LOC_SHIFT);
if (sensor_location != 0) {
status = hw->phy.ops.read_i2c_byte(hw,
ixgbe_emc_temp_data[sensor_index],
IXGBE_I2C_THERMAL_SENSOR_ADDR,
&data->sensor[i].temp);
if (status)
goto out;
}
}
out:
return status;
}
/**
* ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds
* @hw: pointer to hardware structure
*
* Inits the thermal sensor thresholds according to the NVM map
* and save off the threshold and location values into mac.thermal_sensor_data
**/
s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw)
{
s32 status = 0;
u16 ets_offset;
u16 ets_cfg;
u16 ets_sensor;
u8 low_thresh_delta;
u8 num_sensors;
u8 therm_limit;
u8 i;
struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data));
/* Only support thermal sensors attached to 82599 physical port 0 */
if ((hw->mac.type != ixgbe_mac_82599EB) ||
(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
status = IXGBE_NOT_IMPLEMENTED;
goto out;
}
status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset);
if (status)
goto out;
low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >>
IXGBE_ETS_LTHRES_DELTA_SHIFT);
num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
if (num_sensors > IXGBE_MAX_SENSORS)
num_sensors = IXGBE_MAX_SENSORS;
for (i = 0; i < num_sensors; i++) {
u8 sensor_index;
u8 sensor_location;
hw->eeprom.ops.read(hw, (ets_offset + 1 + i), &ets_sensor);
sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
IXGBE_ETS_DATA_INDEX_SHIFT);
sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
IXGBE_ETS_DATA_LOC_SHIFT);
therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK;
hw->phy.ops.write_i2c_byte(hw,
ixgbe_emc_therm_limit[sensor_index],
IXGBE_I2C_THERMAL_SENSOR_ADDR, therm_limit);
if (sensor_location == 0)
continue;
data->sensor[i].location = sensor_location;
data->sensor[i].caution_thresh = therm_limit;
data->sensor[i].max_op_thresh = therm_limit - low_thresh_delta;
}
out:
return status;
}
...@@ -107,6 +107,19 @@ void ixgbe_clear_tx_pending(struct ixgbe_hw *hw); ...@@ -107,6 +107,19 @@ void ixgbe_clear_tx_pending(struct ixgbe_hw *hw);
void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb, void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb,
u32 headroom, int strategy); u32 headroom, int strategy);
#define IXGBE_I2C_THERMAL_SENSOR_ADDR 0xF8
#define IXGBE_EMC_INTERNAL_DATA 0x00
#define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20
#define IXGBE_EMC_DIODE1_DATA 0x01
#define IXGBE_EMC_DIODE1_THERM_LIMIT 0x19
#define IXGBE_EMC_DIODE2_DATA 0x23
#define IXGBE_EMC_DIODE2_THERM_LIMIT 0x1A
#define IXGBE_EMC_DIODE3_DATA 0x2A
#define IXGBE_EMC_DIODE3_THERM_LIMIT 0x30
s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw);
s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw);
#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg))) #define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
#ifndef writeq #ifndef writeq
......
...@@ -112,6 +112,27 @@ ...@@ -112,6 +112,27 @@
#define IXGBE_I2C_DATA_OUT 0x00000008 #define IXGBE_I2C_DATA_OUT 0x00000008
#define IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT 500 #define IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT 500
#define IXGBE_I2C_THERMAL_SENSOR_ADDR 0xF8
#define IXGBE_EMC_INTERNAL_DATA 0x00
#define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20
#define IXGBE_EMC_DIODE1_DATA 0x01
#define IXGBE_EMC_DIODE1_THERM_LIMIT 0x19
#define IXGBE_EMC_DIODE2_DATA 0x23
#define IXGBE_EMC_DIODE2_THERM_LIMIT 0x1A
#define IXGBE_MAX_SENSORS 3
struct ixgbe_thermal_diode_data {
u8 location;
u8 temp;
u8 caution_thresh;
u8 max_op_thresh;
};
struct ixgbe_thermal_sensor_data {
struct ixgbe_thermal_diode_data sensor[IXGBE_MAX_SENSORS];
};
/* Interrupt Registers */ /* Interrupt Registers */
#define IXGBE_EICR 0x00800 #define IXGBE_EICR 0x00800
#define IXGBE_EICS 0x00808 #define IXGBE_EICS 0x00808
...@@ -1678,6 +1699,22 @@ enum { ...@@ -1678,6 +1699,22 @@ enum {
#define IXGBE_PBANUM0_PTR 0x15 #define IXGBE_PBANUM0_PTR 0x15
#define IXGBE_PBANUM1_PTR 0x16 #define IXGBE_PBANUM1_PTR 0x16
#define IXGBE_FREE_SPACE_PTR 0X3E #define IXGBE_FREE_SPACE_PTR 0X3E
/* External Thermal Sensor Config */
#define IXGBE_ETS_CFG 0x26
#define IXGBE_ETS_LTHRES_DELTA_MASK 0x07C0
#define IXGBE_ETS_LTHRES_DELTA_SHIFT 6
#define IXGBE_ETS_TYPE_MASK 0x0038
#define IXGBE_ETS_TYPE_SHIFT 3
#define IXGBE_ETS_TYPE_EMC 0x000
#define IXGBE_ETS_TYPE_EMC_SHIFTED 0x000
#define IXGBE_ETS_NUM_SENSORS_MASK 0x0007
#define IXGBE_ETS_DATA_LOC_MASK 0x3C00
#define IXGBE_ETS_DATA_LOC_SHIFT 10
#define IXGBE_ETS_DATA_INDEX_MASK 0x0300
#define IXGBE_ETS_DATA_INDEX_SHIFT 8
#define IXGBE_ETS_DATA_HTHRESH_MASK 0x00FF
#define IXGBE_SAN_MAC_ADDR_PTR 0x28 #define IXGBE_SAN_MAC_ADDR_PTR 0x28
#define IXGBE_DEVICE_CAPS 0x2C #define IXGBE_DEVICE_CAPS 0x2C
#define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11 #define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11
...@@ -2775,6 +2812,8 @@ struct ixgbe_mac_operations { ...@@ -2775,6 +2812,8 @@ struct ixgbe_mac_operations {
/* Manageability interface */ /* Manageability interface */
s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8); s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
s32 (*get_thermal_sensor_data)(struct ixgbe_hw *);
s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw);
}; };
struct ixgbe_phy_operations { struct ixgbe_phy_operations {
...@@ -2832,6 +2871,7 @@ struct ixgbe_mac_info { ...@@ -2832,6 +2871,7 @@ struct ixgbe_mac_info {
bool orig_link_settings_stored; bool orig_link_settings_stored;
bool autotry_restart; bool autotry_restart;
u8 flags; u8 flags;
struct ixgbe_thermal_sensor_data thermal_sensor_data;
}; };
struct ixgbe_phy_info { struct ixgbe_phy_info {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册