overlays: Add PCF85063 and PCF85063A to i2c-rtc

raspberrypi inclusion
category: feature
bugzilla: 50432

--------------------------------

Add support for the PCF85063 and PCF85063A RTC devices to the
i2c-rtc overlay.

Also enable the device to be used on i2c0 (i2c_vc) on GPIOs 0&1 (use
parameter "i2c0") and GPIOs 44 & 45 (use parameter "i2c_csi_dsi").
Signed-off-by: NPhil Elwell <phil@raspberrypi.com>
Signed-off-by: NFang Yafen <yafen@iscas.ac.cn>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

arch/arm/boot/dts/overlays/README

@@ -1257,6 +1257,10 @@ Params: abx80x                  Select one of the ABx80x family:
 
         pcf2129                 Select the PCF2129 device
 
+        pcf85063                Select the PCF85363 device
+
+        pcf85063a               Select the PCF85363A device
+
         pcf8523                 Select the PCF8523 device
 
         pcf85363                Select the PCF85363 device
@@ -1269,6 +1273,10 @@ Params: abx80x                  Select one of the ABx80x family:
 
         sd3078                  Select the ZXW Shenzhen whwave SD3078 device
 
+        i2c0                    Choose the I2C0 bus on GPIOs 0&1
+
+        i2c_csi_dsi             Choose the I2C0 bus on GPIOs 44&45
+
         addr                    Sets the address for the RTC. Note that the
                                 device must be configured to use the specified
                                 address.

arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts

@@ -6,235 +6,238 @@
 	compatible = "brcm,bcm2835";
 
 	fragment@0 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			abx80x: abx80x@69 {
 				compatible = "abracon,abx80x";
 				reg = <0x69>;
 				abracon,tc-diode = "standard";
 				abracon,tc-resistor = <0>;
-				status = "okay";
 			};
 		};
 	};
 
 	fragment@1 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			ds1307: ds1307@68 {
 				compatible = "dallas,ds1307";
 				reg = <0x68>;
-				status = "okay";
 			};
 		};
 	};
 
 	fragment@2 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			ds1339: ds1339@68 {
 				compatible = "dallas,ds1339";
 				trickle-resistor-ohms = <0>;
 				reg = <0x68>;
-				status = "okay";
 			};
 		};
 	};
 
 	fragment@3 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			ds3231: ds3231@68 {
 				compatible = "maxim,ds3231";
 				reg = <0x68>;
-				status = "okay";
 			};
 		};
 	};
 
 	fragment@4 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			mcp7940x: mcp7940x@6f {
 				compatible = "microchip,mcp7940x";
 				reg = <0x6f>;
-				status = "okay";
 			};
 		};
 	};
 
 	fragment@5 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			mcp7941x: mcp7941x@6f {
 				compatible = "microchip,mcp7941x";
 				reg = <0x6f>;
-				status = "okay";
 			};
 		};
 	};
 
 	fragment@6 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			pcf2127@51 {
 				compatible = "nxp,pcf2127";
 				reg = <0x51>;
-				status = "okay";
 			};
 		};
 	};
 
 	fragment@7 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			pcf8523: pcf8523@68 {
 				compatible = "nxp,pcf8523";
 				reg = <0x68>;
-				status = "okay";
 			};
 		};
 	};
 
 	fragment@8 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			pcf8563: pcf8563@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
-				status = "okay";
 			};
 		};
 	};
 
 	fragment@9 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			m41t62: m41t62@68 {
 				compatible = "st,m41t62";
 				reg = <0x68>;
-				status = "okay";
 			};
 		};
 	};
 
 	fragment@10 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			rv3028: rv3028@52 {
 				compatible = "microcrystal,rv3028";
 				reg = <0x52>;
-				status = "okay";
 			};
 		};
 	};
 
 	fragment@11 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			pcf2129@51 {
 				compatible = "nxp,pcf2129";
 				reg = <0x51>;
-				status = "okay";
 			};
 		};
 	};
 
 	fragment@12 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 	       __dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			pcf85363@51 {
 				compatible = "nxp,pcf85363";
 				reg = <0x51>;
-				status = "okay";
 			};
 		};
 	};
 
 	fragment@13 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			rv1805: rv1805@69 {
 				compatible = "microcrystal,rv1805";
 				reg = <0x69>;
 				abracon,tc-diode = "standard";
 				abracon,tc-resistor = <0>;
-				status = "okay";
 			};
 		};
 	};
 
 	fragment@14 {
-		target = <&i2c_arm>;
+		target = <&i2cbus>;
 		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
 
 			sd3078: sd3078@32 {
 				compatible = "whwave,sd3078";
 				reg = <0x32>;
-				status = "okay";
 			};
 		};
 	};
 
+	fragment@15 {
+		target = <&i2cbus>;
+	       __dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcf85063@51 {
+				compatible = "nxp,pcf85063";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	fragment@16 {
+		target = <&i2cbus>;
+	       __dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcf85063a@51 {
+				compatible = "nxp,pcf85063a";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	frag100: fragment@100 {
+		target = <&i2c_arm>;
+		i2cbus: __overlay__ {
+			status = "okay";
+		};
+	};
+
 	__overrides__ {
 		abx80x = <0>,"+0";
 		ds1307 = <0>,"+1";
@@ -251,6 +254,11 @@
 		pcf85363 = <0>,"+12";
 		rv1805 = <0>,"+13";
 		sd3078 = <0>,"+14";
+		pcf85063 = <0>,"+15";
+		pcf85063a = <0>,"+16";
+
+		i2c0 = <&frag100>, "target:0=",<&i2c0>;
+		i2c_csi_dsi = <&frag100>, "target:0=",<&i2c_csi_dsi>;
 
 		addr = <&abx80x>, "reg:0",
 		       <&ds1307>, "reg:0",