drm/i915/tgl: select correct bit for port select

Bit definitions for port-select got changed for TRANS_CLK_SEL &
TRANS_DDI_FUNC_CTL registers in TGL.

v2 (Lucas):
  - Nuke TRANS_DDI_PORT_NONE since it's 0: we are already clearing
    {TGL_,}TRANS_DDI_PORT_MASK (suggested by Ville)
  - Also cover haswell_get_ddi_port_state() in intel_display.c that was
    missing
  - Define macros using the _SHIFT macros so we don't lose other users

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NMatt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-3-lucas.demarchi@intel.com

drivers/gpu/drm/i915/display/intel_ddi.c

@@ -1773,6 +1773,9 @@ void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state)
 
 	/* Enable TRANS_DDI_FUNC_CTL for the pipe to work in HDMI mode */
 	temp = TRANS_DDI_FUNC_ENABLE;
+	if (INTEL_GEN(dev_priv) >= 12)
+		temp |= TGL_TRANS_DDI_SELECT_PORT(port);
+	else
 		temp |= TRANS_DDI_SELECT_PORT(port);
 
 	switch (crtc_state->pipe_bpp) {
@@ -1853,8 +1856,13 @@ void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state
 	i915_reg_t reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
 	u32 val = I915_READ(reg);
 
-	val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK | TRANS_DDI_DP_VC_PAYLOAD_ALLOC);
-	val |= TRANS_DDI_PORT_NONE;
+	if (INTEL_GEN(dev_priv) >= 12) {
+		val &= ~(TRANS_DDI_FUNC_ENABLE | TGL_TRANS_DDI_PORT_MASK |
+			 TRANS_DDI_DP_VC_PAYLOAD_ALLOC);
+	} else {
+		val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK |
+			 TRANS_DDI_DP_VC_PAYLOAD_ALLOC);
+	}
 	I915_WRITE(reg, val);
 
 	if (dev_priv->quirks & QUIRK_INCREASE_DDI_DISABLED_TIME &&
@@ -2006,10 +2014,19 @@ static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder,
 	mst_pipe_mask = 0;
 	for_each_pipe(dev_priv, p) {
 		enum transcoder cpu_transcoder = (enum transcoder)p;
+		unsigned int port_mask, ddi_select;
+
+		if (INTEL_GEN(dev_priv) >= 12) {
+			port_mask = TGL_TRANS_DDI_PORT_MASK;
+			ddi_select = TGL_TRANS_DDI_SELECT_PORT(port);
+		} else {
+			port_mask = TRANS_DDI_PORT_MASK;
+			ddi_select = TRANS_DDI_SELECT_PORT(port);
+		}
 
 		tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
 
-		if ((tmp & TRANS_DDI_PORT_MASK) != TRANS_DDI_SELECT_PORT(port))
+		if ((tmp & port_mask) != ddi_select)
 			continue;
 
 		if ((tmp & TRANS_DDI_MODE_SELECT_MASK) ==
@@ -2126,9 +2143,14 @@ void intel_ddi_enable_pipe_clock(const struct intel_crtc_state *crtc_state)
 	enum port port = encoder->port;
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
 
-	if (cpu_transcoder != TRANSCODER_EDP)
+	if (cpu_transcoder != TRANSCODER_EDP) {
+		if (INTEL_GEN(dev_priv) >= 12)
+			I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
+				   TGL_TRANS_CLK_SEL_PORT(port));
+		else
 			I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
 				   TRANS_CLK_SEL_PORT(port));
+	}
 }
 
 void intel_ddi_disable_pipe_clock(const struct intel_crtc_state *crtc_state)
@@ -2136,9 +2158,14 @@ void intel_ddi_disable_pipe_clock(const struct intel_crtc_state *crtc_state)
 	struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
 
-	if (cpu_transcoder != TRANSCODER_EDP)
+	if (cpu_transcoder != TRANSCODER_EDP) {
+		if (INTEL_GEN(dev_priv) >= 12)
+			I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
+				   TGL_TRANS_CLK_SEL_DISABLED);
+		else
 			I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
 				   TRANS_CLK_SEL_DISABLED);
+	}
 }
 
 static void _skl_ddi_set_iboost(struct drm_i915_private *dev_priv,

drivers/gpu/drm/i915/display/intel_display.c

@@ -10353,6 +10353,10 @@ static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
 
 	tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
 
+	if (INTEL_GEN(dev_priv) >= 12)
+		port = (tmp & TGL_TRANS_DDI_PORT_MASK) >>
+			TGL_TRANS_DDI_PORT_SHIFT;
+	else
 		port = (tmp & TRANS_DDI_PORT_MASK) >> TRANS_DDI_PORT_SHIFT;
 
 	if (INTEL_GEN(dev_priv) >= 11)

drivers/gpu/drm/i915/i915_reg.h

@@ -9384,10 +9384,12 @@ enum skl_power_gate {
 
 #define  TRANS_DDI_FUNC_ENABLE		(1 << 31)
 /* Those bits are ignored by pipe EDP since it can only connect to DDI A */
-#define  TRANS_DDI_PORT_MASK		(7 << 28)
 #define  TRANS_DDI_PORT_SHIFT		28
-#define  TRANS_DDI_SELECT_PORT(x)	((x) << 28)
-#define  TRANS_DDI_PORT_NONE		(0 << 28)
+#define  TGL_TRANS_DDI_PORT_SHIFT	27
+#define  TRANS_DDI_PORT_MASK		(7 << TRANS_DDI_PORT_SHIFT)
+#define  TGL_TRANS_DDI_PORT_MASK	(0xf << TGL_TRANS_DDI_PORT_SHIFT)
+#define  TRANS_DDI_SELECT_PORT(x)	((x) << TRANS_DDI_PORT_SHIFT)
+#define  TGL_TRANS_DDI_SELECT_PORT(x)	(((x) + 1) << TGL_TRANS_DDI_PORT_SHIFT)
 #define  TRANS_DDI_MODE_SELECT_MASK	(7 << 24)
 #define  TRANS_DDI_MODE_SELECT_HDMI	(0 << 24)
 #define  TRANS_DDI_MODE_SELECT_DVI	(1 << 24)
@@ -9597,6 +9599,9 @@ enum skl_power_gate {
 /* For each transcoder, we need to select the corresponding port clock */
 #define  TRANS_CLK_SEL_DISABLED		(0x0 << 29)
 #define  TRANS_CLK_SEL_PORT(x)		(((x) + 1) << 29)
+#define  TGL_TRANS_CLK_SEL_DISABLED	(0x0 << 28)
+#define  TGL_TRANS_CLK_SEL_PORT(x)	(((x) + 1) << 28)
+
 
 #define CDCLK_FREQ			_MMIO(0x46200)