Skip to content

K
Kernel

openeuler / Kernel
大约 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 defa2e54 编写于 作者: A Andrew Lunn 提交者： Jakub Kicinski
浏览文件
操作

net: dsa: mt7530: Separate C22 and C45 MDIO bus transactions 

mt7530 does support C45, but its uses a mix of registering its MDIO
bus and providing its private MDIO bus to the DSA core, too. This makes
the change a bit more complex.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
上级 860edff5
隐藏空白更改
内联 并排
Showing with 55 addition and 47 deletion
drivers/net/dsa/mt7530.c
浏览文件 @ defa2e54
...@@ -608,17 +608,29 @@ mt7530_mib_reset(struct dsa_switch *ds) ...@@ -608,17 +608,29 @@ mt7530_mib_reset(struct dsa_switch *ds)
mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE); mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
} }
static int mt7530_phy_read(struct mt7530_priv *priv, int port, int regnum) static int mt7530_phy_read_c22(struct mt7530_priv *priv, int port, int regnum)
{ {
return mdiobus_read_nested(priv->bus, port, regnum); return mdiobus_read_nested(priv->bus, port, regnum);
} }
static int mt7530_phy_write(struct mt7530_priv *priv, int port, int regnum, static int mt7530_phy_write_c22(struct mt7530_priv *priv, int port, int regnum,
u16 val) u16 val)
{ {
return mdiobus_write_nested(priv->bus, port, regnum, val); return mdiobus_write_nested(priv->bus, port, regnum, val);
} }
static int mt7530_phy_read_c45(struct mt7530_priv *priv, int port,
int devad, int regnum)
{
return mdiobus_c45_read_nested(priv->bus, port, devad, regnum);
}
static int mt7530_phy_write_c45(struct mt7530_priv *priv, int port, int devad,
int regnum, u16 val)
{
return mdiobus_c45_write_nested(priv->bus, port, devad, regnum, val);
}
static int static int
mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad, mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
int regnum) int regnum)
...@@ -670,7 +682,7 @@ mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad, ...@@ -670,7 +682,7 @@ mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
static int static int
mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad, mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
int regnum, u32 data) int regnum, u16 data)
{ {
struct mii_bus *bus = priv->bus; struct mii_bus *bus = priv->bus;
struct mt7530_dummy_poll p; struct mt7530_dummy_poll p;
...@@ -793,55 +805,36 @@ mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum, ...@@ -793,55 +805,36 @@ mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
} }
static int static int
mt7531_ind_phy_read(struct mt7530_priv *priv, int port, int regnum) mt753x_phy_read_c22(struct mii_bus *bus, int port, int regnum)
{ {
int devad; struct mt7530_priv *priv = bus->priv;
int ret;
if (regnum & MII_ADDR_C45) {
devad = (regnum >> MII_DEVADDR_C45_SHIFT) & 0x1f;
ret = mt7531_ind_c45_phy_read(priv, port, devad,
regnum & MII_REGADDR_C45_MASK);
} else {
ret = mt7531_ind_c22_phy_read(priv, port, regnum);
}
return ret; return priv->info->phy_read_c22(priv, port, regnum);
} }
static int static int
mt7531_ind_phy_write(struct mt7530_priv *priv, int port, int regnum, mt753x_phy_read_c45(struct mii_bus *bus, int port, int devad, int regnum)
u16 data)
{ {
int devad; struct mt7530_priv *priv = bus->priv;
int ret;
if (regnum & MII_ADDR_C45) {
devad = (regnum >> MII_DEVADDR_C45_SHIFT) & 0x1f;
ret = mt7531_ind_c45_phy_write(priv, port, devad,
regnum & MII_REGADDR_C45_MASK,
data);
} else {
ret = mt7531_ind_c22_phy_write(priv, port, regnum, data);
}
return ret; return priv->info->phy_read_c45(priv, port, devad, regnum);
} }
static int static int
mt753x_phy_read(struct mii_bus *bus, int port, int regnum) mt753x_phy_write_c22(struct mii_bus *bus, int port, int regnum, u16 val)
{ {
struct mt7530_priv *priv = bus->priv; struct mt7530_priv *priv = bus->priv;
return priv->info->phy_read(priv, port, regnum); return priv->info->phy_write_c22(priv, port, regnum, val);
} }
static int static int
mt753x_phy_write(struct mii_bus *bus, int port, int regnum, u16 val) mt753x_phy_write_c45(struct mii_bus *bus, int port, int devad, int regnum,
u16 val)
{ {
struct mt7530_priv *priv = bus->priv; struct mt7530_priv *priv = bus->priv;
return priv->info->phy_write(priv, port, regnum, val); return priv->info->phy_write_c45(priv, port, devad, regnum, val);
} }
static void static void
...@@ -2086,8 +2079,10 @@ mt7530_setup_mdio(struct mt7530_priv *priv) ...@@ -2086,8 +2079,10 @@ mt7530_setup_mdio(struct mt7530_priv *priv)
bus->priv = priv; bus->priv = priv;
bus->name = KBUILD_MODNAME "-mii"; bus->name = KBUILD_MODNAME "-mii";
snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++); snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++);
bus->read = mt753x_phy_read; bus->read = mt753x_phy_read_c22;
bus->write = mt753x_phy_write; bus->write = mt753x_phy_write_c22;
bus->read_c45 = mt753x_phy_read_c45;
bus->write_c45 = mt753x_phy_write_c45;
bus->parent = dev; bus->parent = dev;
bus->phy_mask = ~ds->phys_mii_mask; bus->phy_mask = ~ds->phys_mii_mask;
...@@ -3182,8 +3177,10 @@ static const struct mt753x_info mt753x_table[] = { ...@@ -3182,8 +3177,10 @@ static const struct mt753x_info mt753x_table[] = {
.id = ID_MT7621, .id = ID_MT7621,
.pcs_ops = &mt7530_pcs_ops, .pcs_ops = &mt7530_pcs_ops,
.sw_setup = mt7530_setup, .sw_setup = mt7530_setup,
.phy_read = mt7530_phy_read, .phy_read_c22 = mt7530_phy_read_c22,
.phy_write = mt7530_phy_write, .phy_write_c22 = mt7530_phy_write_c22,
.phy_read_c45 = mt7530_phy_read_c45,
.phy_write_c45 = mt7530_phy_write_c45,
.pad_setup = mt7530_pad_clk_setup, .pad_setup = mt7530_pad_clk_setup,
.mac_port_get_caps = mt7530_mac_port_get_caps, .mac_port_get_caps = mt7530_mac_port_get_caps,
.mac_port_config = mt7530_mac_config, .mac_port_config = mt7530_mac_config,
...@@ -3192,8 +3189,10 @@ static const struct mt753x_info mt753x_table[] = { ...@@ -3192,8 +3189,10 @@ static const struct mt753x_info mt753x_table[] = {
.id = ID_MT7530, .id = ID_MT7530,
.pcs_ops = &mt7530_pcs_ops, .pcs_ops = &mt7530_pcs_ops,
.sw_setup = mt7530_setup, .sw_setup = mt7530_setup,
.phy_read = mt7530_phy_read, .phy_read_c22 = mt7530_phy_read_c22,
.phy_write = mt7530_phy_write, .phy_write_c22 = mt7530_phy_write_c22,
.phy_read_c45 = mt7530_phy_read_c45,
.phy_write_c45 = mt7530_phy_write_c45,
.pad_setup = mt7530_pad_clk_setup, .pad_setup = mt7530_pad_clk_setup,
.mac_port_get_caps = mt7530_mac_port_get_caps, .mac_port_get_caps = mt7530_mac_port_get_caps,
.mac_port_config = mt7530_mac_config, .mac_port_config = mt7530_mac_config,
...@@ -3202,8 +3201,10 @@ static const struct mt753x_info mt753x_table[] = { ...@@ -3202,8 +3201,10 @@ static const struct mt753x_info mt753x_table[] = {
.id = ID_MT7531, .id = ID_MT7531,
.pcs_ops = &mt7531_pcs_ops, .pcs_ops = &mt7531_pcs_ops,
.sw_setup = mt7531_setup, .sw_setup = mt7531_setup,
.phy_read = mt7531_ind_phy_read, .phy_read_c22 = mt7531_ind_c22_phy_read,
.phy_write = mt7531_ind_phy_write, .phy_write_c22 = mt7531_ind_c22_phy_write,
.phy_read_c45 = mt7531_ind_c45_phy_read,
.phy_write_c45 = mt7531_ind_c45_phy_write,
.pad_setup = mt7531_pad_setup, .pad_setup = mt7531_pad_setup,
.cpu_port_config = mt7531_cpu_port_config, .cpu_port_config = mt7531_cpu_port_config,
.mac_port_get_caps = mt7531_mac_port_get_caps, .mac_port_get_caps = mt7531_mac_port_get_caps,
...@@ -3263,7 +3264,7 @@ mt7530_probe(struct mdio_device *mdiodev) ...@@ -3263,7 +3264,7 @@ mt7530_probe(struct mdio_device *mdiodev)
* properly. * properly.
*/ */
if (!priv->info->sw_setup || !priv->info->pad_setup || if (!priv->info->sw_setup || !priv->info->pad_setup ||
!priv->info->phy_read || !priv->info->phy_write || !priv->info->phy_read_c22 || !priv->info->phy_write_c22 ||
!priv->info->mac_port_get_caps || !priv->info->mac_port_get_caps ||
!priv->info->mac_port_config) !priv->info->mac_port_config)
return -EINVAL; return -EINVAL;
......
drivers/net/dsa/mt7530.h
浏览文件 @ defa2e54
...@@ -750,8 +750,10 @@ struct mt753x_pcs { ...@@ -750,8 +750,10 @@ struct mt753x_pcs {
/* struct mt753x_info - This is the main data structure for holding the specific /* struct mt753x_info - This is the main data structure for holding the specific
* part for each supported device * part for each supported device
* @sw_setup: Holding the handler to a device initialization * @sw_setup: Holding the handler to a device initialization
* @phy_read: Holding the way reading PHY port * @phy_read_c22: Holding the way reading PHY port using C22
* @phy_write: Holding the way writing PHY port * @phy_write_c22: Holding the way writing PHY port using C22
* @phy_read_c45: Holding the way reading PHY port using C45
* @phy_write_c45: Holding the way writing PHY port using C45
* @pad_setup: Holding the way setting up the bus pad for a certain * @pad_setup: Holding the way setting up the bus pad for a certain
* MAC port * MAC port
* @phy_mode_supported: Check if the PHY type is being supported on a certain * @phy_mode_supported: Check if the PHY type is being supported on a certain
...@@ -767,8 +769,13 @@ struct mt753x_info { ...@@ -767,8 +769,13 @@ struct mt753x_info {
const struct phylink_pcs_ops *pcs_ops; const struct phylink_pcs_ops *pcs_ops;
int (*sw_setup)(struct dsa_switch *ds); int (*sw_setup)(struct dsa_switch *ds);
int (*phy_read)(struct mt7530_priv *priv, int port, int regnum); int (*phy_read_c22)(struct mt7530_priv *priv, int port, int regnum);
int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val); int (*phy_write_c22)(struct mt7530_priv *priv, int port, int regnum,
u16 val);
int (*phy_read_c45)(struct mt7530_priv *priv, int port, int devad,
int regnum);
int (*phy_write_c45)(struct mt7530_priv *priv, int port, int devad,
int regnum, u16 val);
int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface); int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface);
int (*cpu_port_config)(struct dsa_switch *ds, int port); int (*cpu_port_config)(struct dsa_switch *ds, int port);
void (*mac_port_get_caps)(struct dsa_switch *ds, int port, void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或