diff --git a/Documentation/devicetree/bindings/regulator/isl9305.txt b/Documentation/devicetree/bindings/regulator/isl9305.txt
new file mode 100644
index 0000000000000000000000000000000000000000..a626fc1bbf0d0bd1797191e91e31959e09c338a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/isl9305.txt
@@ -0,0 +1,36 @@
+Intersil ISL9305/ISL9305H voltage regulator
+
+Required properties:
+
+- compatible: "isl,isl9305" or "isl,isl9305h"
+- reg: I2C slave address, usually 0x68.
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values being "dcd1", "dcd2", "ldo1" and "ldo2". The content of each sub-node
+  is defined by the standard binding for regulators; see regulator.txt.
+- VINDCD1-supply: A phandle to a regulator node supplying VINDCD1.
+  VINDCD2-supply: A phandle to a regulator node supplying VINDCD2.
+  VINLDO1-supply: A phandle to a regulator node supplying VINLDO1.
+  VINLDO2-supply: A phandle to a regulator node supplying VINLDO2.
+
+Optional properties:
+- Per-regulator optional properties are defined in regulator.txt
+
+Example
+
+	pmic: isl9305@68 {
+		compatible = "isl,isl9305";
+		reg = <0x68>;
+
+		VINDCD1-supply = <&system_power>;
+		VINDCD2-supply = <&system_power>;
+		VINLDO1-supply = <&system_power>;
+		VINLDO2-supply = <&system_power>;
+
+		regulators {
+			dcd1 {
+			        regulator-name = "VDD_DSP";
+				regulator-always-on;
+                        };
+		};
+	};
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index e6b98ed4c12fc9f34971474754d5a350d343cf01..3c8b6f401e4fce9cb4e259395ef923990b17f733 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -250,6 +250,12 @@ config REGULATOR_HI6421
 	  21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
 	  of them come with support to either ECO (idle) or sleep mode.
 
+config REGULATOR_ISL9305
+	tristate "Intersil ISL9305 regulator"
+	depends on I2C
+	help
+	  This driver supports ISL9305 voltage regulator chip.
+
 config REGULATOR_ISL6271A
 	tristate "Intersil ISL6271A Power regulator"
 	depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 5513e2c141b11bff477c45fa7ce0d551970b9043..e12fee8c943ba7ab5c397a713aac2d7018d04e88 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
 obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
 obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
 obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
+obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
 obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
diff --git a/drivers/regulator/isl9305.c b/drivers/regulator/isl9305.c
new file mode 100644
index 0000000000000000000000000000000000000000..b0d12d186b687e4b05e9b8f4006a568353d9a18e
--- /dev/null
+++ b/drivers/regulator/isl9305.c
@@ -0,0 +1,247 @@
+/*
+ * isl9305 - Intersil ISL9305 DCDC regulator
+ *
+ * Copyright 2014 Linaro Ltd
+ *
+ * Author: Mark Brown <broonie@kernel.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+#include <linux/platform_data/isl9305.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
+
+/*
+ * Registers
+ */
+#define ISL9305_DCD1OUT          0x0
+#define ISL9305_DCD2OUT          0x1
+#define ISL9305_LDO1OUT          0x2
+#define ISL9305_LDO2OUT          0x3
+#define ISL9305_DCD_PARAMETER    0x4
+#define ISL9305_SYSTEM_PARAMETER 0x5
+#define ISL9305_DCD_SRCTL        0x6
+
+#define ISL9305_MAX_REG ISL9305_DCD_SRCTL
+
+/*
+ * DCD_PARAMETER
+ */
+#define ISL9305_DCD_PHASE   0x40
+#define ISL9305_DCD2_ULTRA  0x20
+#define ISL9305_DCD1_ULTRA  0x10
+#define ISL9305_DCD2_BLD    0x08
+#define ISL9305_DCD1_BLD    0x04
+#define ISL9305_DCD2_MODE   0x02
+#define ISL9305_DCD1_MODE   0x01
+
+/*
+ * SYSTEM_PARAMETER
+ */
+#define ISL9305_I2C_EN      0x40
+#define ISL9305_DCDPOR_MASK 0x30
+#define ISL9305_LDO2_EN     0x08
+#define ISL9305_LDO1_EN     0x04
+#define ISL9305_DCD2_EN     0x02
+#define ISL9305_DCD1_EN     0x01
+
+/*
+ * DCD_SRCTL
+ */
+#define ISL9305_DCD2SR_MASK 0xc0
+#define ISL9305_DCD1SR_MASK 0x07
+
+static const struct regulator_ops isl9305_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc isl9305_regulators[] = {
+	[ISL9305_DCD1] = {
+		.name =		"DCD1",
+		.n_voltages =	0x70,
+		.min_uV =	825000,
+		.uV_step =	25000,
+		.vsel_reg =	ISL9305_DCD1OUT,
+		.vsel_mask =	0x7f,
+		.enable_reg =	ISL9305_SYSTEM_PARAMETER,
+		.enable_mask =	ISL9305_DCD1_EN,
+		.supply_name =	"VINDCD1",
+		.ops =		&isl9305_ops,
+	},
+	[ISL9305_DCD2] = {
+		.name =		"DCD2",
+		.n_voltages =	0x70,
+		.min_uV =	825000,
+		.uV_step =	25000,
+		.vsel_reg =	ISL9305_DCD2OUT,
+		.vsel_mask =	0x7f,
+		.enable_reg =	ISL9305_SYSTEM_PARAMETER,
+		.enable_mask =	ISL9305_DCD2_EN,
+		.supply_name =	"VINDCD2",
+		.ops =		&isl9305_ops,
+	},
+	[ISL9305_LDO1] = {
+		.name =		"LDO1",
+		.n_voltages =	0x37,
+		.min_uV =	900000,
+		.uV_step =	50000,
+		.vsel_reg =	ISL9305_LDO1OUT,
+		.vsel_mask =	0x3f,
+		.enable_reg =	ISL9305_SYSTEM_PARAMETER,
+		.enable_mask =	ISL9305_LDO1_EN,
+		.supply_name =	"VINLDO1",
+		.ops =		&isl9305_ops,
+	},
+	[ISL9305_LDO2] = {
+		.name =		"LDO2",
+		.n_voltages =	0x37,
+		.min_uV =	900000,
+		.uV_step =	50000,
+		.vsel_reg =	ISL9305_LDO2OUT,
+		.vsel_mask =	0x3f,
+		.enable_reg =	ISL9305_SYSTEM_PARAMETER,
+		.enable_mask =	ISL9305_LDO2_EN,
+		.supply_name =	"VINLDO2",
+		.ops =		&isl9305_ops,
+	},
+};
+
+#ifdef CONFIG_OF
+static struct of_regulator_match isl9305_reg_matches[] = {
+	[ISL9305_DCD1] = { .name = "dcd1" },
+	[ISL9305_DCD2] = { .name = "dcd2" },
+	[ISL9305_LDO1] = { .name = "ldo1" },
+	[ISL9305_LDO2] = { .name = "ldo2" },
+};
+
+static struct of_regulator_match *isl9305_parse_dt(struct i2c_client *i2c)
+{
+	struct device_node *node = i2c->dev.of_node;
+	struct of_regulator_match *matches;
+	struct device_node *regs;
+	int count;
+
+	regs = of_get_child_by_name(node, "regulators");
+	if (!regs)
+		return NULL;
+
+	matches = devm_kmemdup(&i2c->dev, isl9305_reg_matches,
+			       sizeof(isl9305_reg_matches), GFP_KERNEL);
+	if (!matches)
+		return NULL;
+
+	count = of_regulator_match(&i2c->dev, regs, matches,
+				   ARRAY_SIZE(isl9305_reg_matches));
+	of_node_put(regs);
+	if ((count < 0) || (count > ARRAY_SIZE(isl9305_reg_matches)))
+		return NULL;
+
+	return matches;
+}
+#else
+static struct of_regulator_match *isl9305_parse_dt(struct i2c_client *i2c)
+{
+	return NULL;
+}
+#endif
+
+static const struct regmap_config isl9305_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = ISL9305_MAX_REG,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int isl9305_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct regulator_config config = { };
+	struct isl9305_pdata *pdata = i2c->dev.platform_data;
+	struct of_regulator_match *of_matches;
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	int i, ret;
+
+	of_matches = isl9305_parse_dt(i2c);
+
+	regmap = devm_regmap_init_i2c(i2c, &isl9305_regmap);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
+		return ret;
+	}
+
+	config.dev = &i2c->dev;
+
+	for (i = 0; i < ARRAY_SIZE(isl9305_regulators); i++) {
+		config.of_node = NULL;
+		config.init_data = NULL;
+
+		if (of_matches) {
+			config.init_data = of_matches[i].init_data;
+			config.of_node = of_matches[i].of_node;
+		}
+
+		if (!config.init_data && pdata)
+			config.init_data = pdata->init_data[i];
+
+		rdev = devm_regulator_register(&i2c->dev,
+					       &isl9305_regulators[i],
+					       &config);
+		if (IS_ERR(rdev)) {
+			ret = PTR_ERR(rdev);
+			dev_err(&i2c->dev, "Failed to register %s: %d\n",
+				isl9305_regulators[i].name, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id isl9305_dt_ids[] = {
+	{ .compatible = "isl,isl9305" },
+	{ .compatible = "isl,isl9305h" },
+	{},
+};
+#endif
+
+static const struct i2c_device_id isl9305_i2c_id[] = {
+	{ "isl9305", },
+	{ "isl9305h", },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, isl9305_i2c_id);
+
+static struct i2c_driver isl9305_regulator_driver = {
+	.driver = {
+		.name = "isl9305",
+		.owner = THIS_MODULE,
+		.of_match_table	= of_match_ptr(isl9305_dt_ids),
+	},
+	.probe = isl9305_i2c_probe,
+	.id_table = isl9305_i2c_id,
+};
+
+module_i2c_driver(isl9305_regulator_driver);
+
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("Intersil ISL9305 DCDC regulator");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/platform_data/isl9305.h b/include/linux/platform_data/isl9305.h
new file mode 100644
index 0000000000000000000000000000000000000000..1419133fa69e9be9ad07e55690fb8abeff966e32
--- /dev/null
+++ b/include/linux/platform_data/isl9305.h
@@ -0,0 +1,30 @@
+/*
+ * isl9305 - Intersil ISL9305 DCDC regulator
+ *
+ * Copyright 2014 Linaro Ltd
+ *
+ * Author: Mark Brown <broonie@kernel.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ISL9305_H
+#define __ISL9305_H
+
+#define ISL9305_DCD1 0
+#define ISL9305_DCD2 1
+#define ISL9305_LDO1 2
+#define ISL9305_LDO2 3
+
+#define ISL9305_MAX_REGULATOR ISL9305_LDO2
+
+struct regulator_init_data;
+
+struct isl9305_pdata {
+	struct regulator_init_data *init_data[ISL9305_MAX_REGULATOR];
+};
+
+#endif