提交 d9489fb6 编写于 作者: R Randy Dunlap 提交者: Linus Torvalds

[PATCH] kernel-doc: fix fusion and i2o docs

Correct lots of typos, kernel-doc warnings, & kernel-doc usage in fusion and
i2o drivers.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 da39aa8f
......@@ -347,7 +347,7 @@ mpt_reply(MPT_ADAPTER *ioc, u32 pa)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
* @irq: irq number (not used)
* @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
......@@ -387,14 +387,16 @@ mpt_interrupt(int irq, void *bus_id)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_base_reply - MPT base driver's callback routine; all base driver
* "internal" request/reply processing is routed here.
* Currently used for EventNotification and EventAck handling.
/**
* mpt_base_reply - MPT base driver's callback routine
* @ioc: Pointer to MPT_ADAPTER structure
* @mf: Pointer to original MPT request frame
* @reply: Pointer to MPT reply frame (NULL if TurboReply)
*
* MPT base driver's callback routine; all base driver
* "internal" request/reply processing is routed here.
* Currently used for EventNotification and EventAck handling.
*
* Returns 1 indicating original alloc'd request frame ptr
* should be freed, or 0 if it shouldn't.
*/
......@@ -530,7 +532,7 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
* @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
*
* This routine is called by a protocol-specific driver (SCSI host,
* LAN, SCSI target) to register it's reply callback routine. Each
* LAN, SCSI target) to register its reply callback routine. Each
* protocol-specific driver must do this before it will be able to
* use any IOC resources, such as obtaining request frames.
*
......@@ -572,7 +574,7 @@ mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass)
* mpt_deregister - Deregister a protocol drivers resources.
* @cb_idx: previously registered callback handle
*
* Each protocol-specific driver should call this routine when it's
* Each protocol-specific driver should call this routine when its
* module is unloaded.
*/
void
......@@ -617,7 +619,7 @@ mpt_event_register(int cb_idx, MPT_EVHANDLER ev_cbfunc)
*
* Each protocol-specific driver should call this routine
* when it does not (or can no longer) handle events,
* or when it's module is unloaded.
* or when its module is unloaded.
*/
void
mpt_event_deregister(int cb_idx)
......@@ -656,7 +658,7 @@ mpt_reset_register(int cb_idx, MPT_RESETHANDLER reset_func)
*
* Each protocol-specific driver should call this routine
* when it does not (or can no longer) handle IOC reset handling,
* or when it's module is unloaded.
* or when its module is unloaded.
*/
void
mpt_reset_deregister(int cb_idx)
......@@ -670,6 +672,8 @@ mpt_reset_deregister(int cb_idx)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_device_driver_register - Register device driver hooks
* @dd_cbfunc: driver callbacks struct
* @cb_idx: MPT protocol driver index
*/
int
mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, int cb_idx)
......@@ -696,6 +700,7 @@ mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, int cb_idx)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_device_driver_deregister - DeRegister device driver hooks
* @cb_idx: MPT protocol driver index
*/
void
mpt_device_driver_deregister(int cb_idx)
......@@ -887,8 +892,7 @@ mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_send_handshake_request - Send MPT request via doorbell
* handshake method.
* mpt_send_handshake_request - Send MPT request via doorbell handshake method.
* @handle: Handle of registered MPT protocol driver
* @ioc: Pointer to MPT adapter structure
* @reqBytes: Size of the request in bytes
......@@ -981,10 +985,13 @@ mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req,
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_host_page_access_control - provides mechanism for the host
* driver to control the IOC's Host Page Buffer access.
* mpt_host_page_access_control - control the IOC's Host Page Buffer access
* @ioc: Pointer to MPT adapter structure
* @access_control_value: define bits below
* @sleepFlag: Specifies whether the process can sleep
*
* Provides mechanism for the host driver to control the IOC's
* Host Page Buffer access.
*
* Access Control Value - bits[15:12]
* 0h Reserved
......@@ -1022,10 +1029,10 @@ mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int slee
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_host_page_alloc - allocate system memory for the fw
* If we already allocated memory in past, then resend the same pointer.
* ioc@: Pointer to pointer to IOC adapter
* ioc_init@: Pointer to ioc init config page
* @ioc: Pointer to pointer to IOC adapter
* @ioc_init: Pointer to ioc init config page
*
* If we already allocated memory in past, then resend the same pointer.
* Returns 0 for success, non-zero for failure.
*/
static int
......@@ -1091,12 +1098,15 @@ return 0;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_verify_adapter - Given a unique IOC identifier, set pointer to
* the associated MPT adapter structure.
* mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
* @iocid: IOC unique identifier (integer)
* @iocpp: Pointer to pointer to IOC adapter
*
* Returns iocid and sets iocpp.
* Given a unique IOC identifier, set pointer to the associated MPT
* adapter structure.
*
* Returns iocid and sets iocpp if iocid is found.
* Returns -1 if iocid is not found.
*/
int
mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
......@@ -1115,9 +1125,10 @@ mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_attach - Install a PCI intelligent MPT adapter.
* @pdev: Pointer to pci_dev structure
* @id: PCI device ID information
*
* This routine performs all the steps necessary to bring the IOC of
* a MPT adapter to a OPERATIONAL state. This includes registering
......@@ -1417,10 +1428,9 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_detach - Remove a PCI intelligent MPT adapter.
* @pdev: Pointer to pci_dev structure
*
*/
void
......@@ -1466,10 +1476,10 @@ mpt_detach(struct pci_dev *pdev)
*/
#ifdef CONFIG_PM
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_suspend - Fusion MPT base driver suspend routine.
*
*
* @pdev: Pointer to pci_dev structure
* @state: new state to enter
*/
int
mpt_suspend(struct pci_dev *pdev, pm_message_t state)
......@@ -1505,10 +1515,9 @@ mpt_suspend(struct pci_dev *pdev, pm_message_t state)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_resume - Fusion MPT base driver resume routine.
*
*
* @pdev: Pointer to pci_dev structure
*/
int
mpt_resume(struct pci_dev *pdev)
......@@ -1566,7 +1575,7 @@ mpt_signal_reset(int index, MPT_ADAPTER *ioc, int reset_phase)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_do_ioc_recovery - Initialize or recover MPT adapter.
* @ioc: Pointer to MPT adapter structure
* @reason: Event word / reason
......@@ -1892,13 +1901,15 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_detect_bound_ports - Search for PCI bus/dev_function
* which matches PCI bus/dev_function (+/-1) for newly discovered 929,
* 929X, 1030 or 1035.
/**
* mpt_detect_bound_ports - Search for matching PCI bus/dev_function
* @ioc: Pointer to MPT adapter structure
* @pdev: Pointer to (struct pci_dev) structure
*
* Search for PCI bus/dev_function which matches
* PCI bus/dev_function (+/-1) for newly discovered 929,
* 929X, 1030 or 1035.
*
* If match on PCI dev_function +/-1 is found, bind the two MPT adapters
* using alt_ioc pointer fields in their %MPT_ADAPTER structures.
*/
......@@ -1945,9 +1956,9 @@ mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_adapter_disable - Disable misbehaving MPT adapter.
* @this: Pointer to MPT adapter structure
* @ioc: Pointer to MPT adapter structure
*/
static void
mpt_adapter_disable(MPT_ADAPTER *ioc)
......@@ -2046,9 +2057,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_adapter_dispose - Free all resources associated with a MPT
* adapter.
/**
* mpt_adapter_dispose - Free all resources associated with an MPT adapter
* @ioc: Pointer to MPT adapter structure
*
* This routine unregisters h/w resources and frees all alloc'd memory
......@@ -2099,8 +2109,8 @@ mpt_adapter_dispose(MPT_ADAPTER *ioc)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* MptDisplayIocCapabilities - Disply IOC's capacilities.
/**
* MptDisplayIocCapabilities - Disply IOC's capabilities.
* @ioc: Pointer to MPT adapter structure
*/
static void
......@@ -2142,7 +2152,7 @@ MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* MakeIocReady - Get IOC to a READY state, using KickStart if needed.
* @ioc: Pointer to MPT_ADAPTER structure
* @force: Force hard KickStart of IOC
......@@ -2279,7 +2289,7 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_GetIocState - Get the current state of a MPT adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @cooked: Request raw or cooked IOC state
......@@ -2304,7 +2314,7 @@ mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* GetIocFacts - Send IOCFacts request to MPT adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @sleepFlag: Specifies whether the process can sleep
......@@ -2478,7 +2488,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* GetPortFacts - Send PortFacts request to MPT adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @portnum: Port number
......@@ -2545,7 +2555,7 @@ GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* SendIocInit - Send IOCInit request to MPT adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @sleepFlag: Specifies whether the process can sleep
......@@ -2630,7 +2640,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
}
/* No need to byte swap the multibyte fields in the reply
* since we don't even look at it's contents.
* since we don't even look at its contents.
*/
dhsprintk((MYIOC_s_INFO_FMT "Sending PortEnable (req @ %p)\n",
......@@ -2672,7 +2682,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* SendPortEnable - Send PortEnable request to MPT adapter port.
* @ioc: Pointer to MPT_ADAPTER structure
* @portnum: Port number to enable
......@@ -2723,9 +2733,13 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
return rc;
}
/*
* ioc: Pointer to MPT_ADAPTER structure
* size - total FW bytes
/**
* mpt_alloc_fw_memory - allocate firmware memory
* @ioc: Pointer to MPT_ADAPTER structure
* @size: total FW bytes
*
* If memory has already been allocated, the same (cached) value
* is returned.
*/
void
mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
......@@ -2742,9 +2756,12 @@ mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
ioc->alloc_total += size;
}
}
/*
* If alt_img is NULL, delete from ioc structure.
* Else, delete a secondary image in same format.
/**
* mpt_free_fw_memory - free firmware memory
* @ioc: Pointer to MPT_ADAPTER structure
*
* If alt_img is NULL, delete from ioc structure.
* Else, delete a secondary image in same format.
*/
void
mpt_free_fw_memory(MPT_ADAPTER *ioc)
......@@ -2763,7 +2780,7 @@ mpt_free_fw_memory(MPT_ADAPTER *ioc)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
* @ioc: Pointer to MPT_ADAPTER structure
* @sleepFlag: Specifies whether the process can sleep
......@@ -2865,10 +2882,10 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_downloadboot - DownloadBoot code
* @ioc: Pointer to MPT_ADAPTER structure
* @flag: Specify which part of IOC memory is to be uploaded.
* @pFwHeader: Pointer to firmware header info
* @sleepFlag: Specifies whether the process can sleep
*
* FwDownloadBoot requires Programmed IO access.
......@@ -3071,7 +3088,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* KickStart - Perform hard reset of MPT adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @force: Force hard reset
......@@ -3145,12 +3162,12 @@ KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_diag_reset - Perform hard reset of the adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @ignore: Set if to honor and clear to ignore
* the reset history bit
* @sleepflag: CAN_SLEEP if called in a non-interrupt thread,
* @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
* else set to NO_SLEEP (use mdelay instead)
*
* This routine places the adapter in diagnostic mode via the
......@@ -3436,11 +3453,12 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* SendIocReset - Send IOCReset request to MPT adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @reset_type: reset type, expected values are
* %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
* @sleepFlag: Specifies whether the process can sleep
*
* Send IOCReset request to the MPT adapter.
*
......@@ -3494,11 +3512,12 @@ SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* initChainBuffers - Allocate memory for and initialize
* chain buffers, chain buffer control arrays and spinlock.
* @hd: Pointer to MPT_SCSI_HOST structure
* @init: If set, initialize the spin lock.
/**
* initChainBuffers - Allocate memory for and initialize chain buffers
* @ioc: Pointer to MPT_ADAPTER structure
*
* Allocates memory for and initializes chain buffers,
* chain buffer control arrays and spinlock.
*/
static int
initChainBuffers(MPT_ADAPTER *ioc)
......@@ -3594,7 +3613,7 @@ initChainBuffers(MPT_ADAPTER *ioc)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* PrimeIocFifos - Initialize IOC request and reply FIFOs.
* @ioc: Pointer to MPT_ADAPTER structure
*
......@@ -3891,15 +3910,15 @@ mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* WaitForDoorbellAck - Wait for IOC to clear the IOP_DOORBELL_STATUS bit
* in it's IntStatus register.
/**
* WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
* @ioc: Pointer to MPT_ADAPTER structure
* @howlong: How long to wait (in seconds)
* @sleepFlag: Specifies whether the process can sleep
*
* This routine waits (up to ~2 seconds max) for IOC doorbell
* handshake ACKnowledge.
* handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
* bit in its IntStatus register being clear.
*
* Returns a negative value on failure, else wait loop count.
*/
......@@ -3942,14 +3961,14 @@ WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* WaitForDoorbellInt - Wait for IOC to set the HIS_DOORBELL_INTERRUPT bit
* in it's IntStatus register.
/**
* WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
* @ioc: Pointer to MPT_ADAPTER structure
* @howlong: How long to wait (in seconds)
* @sleepFlag: Specifies whether the process can sleep
*
* This routine waits (up to ~2 seconds max) for IOC doorbell interrupt.
* This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
* (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
*
* Returns a negative value on failure, else wait loop count.
*/
......@@ -3991,8 +4010,8 @@ WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* WaitForDoorbellReply - Wait for and capture a IOC handshake reply.
/**
* WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
* @ioc: Pointer to MPT_ADAPTER structure
* @howlong: How long to wait (in seconds)
* @sleepFlag: Specifies whether the process can sleep
......@@ -4077,7 +4096,7 @@ WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* GetLanConfigPages - Fetch LANConfig pages.
* @ioc: Pointer to MPT_ADAPTER structure
*
......@@ -4188,12 +4207,9 @@ GetLanConfigPages(MPT_ADAPTER *ioc)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mptbase_sas_persist_operation - Perform operation on SAS Persitent Table
/**
* mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
* @ioc: Pointer to MPT_ADAPTER structure
* @sas_address: 64bit SAS Address for operation.
* @target_id: specified target for operation
* @bus: specified bus for operation
* @persist_opcode: see below
*
* MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
......@@ -4202,7 +4218,7 @@ GetLanConfigPages(MPT_ADAPTER *ioc)
*
* NOTE: Don't use not this function during interrupt time.
*
* Returns: 0 for success, non-zero error
* Returns 0 for success, non-zero error
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
......@@ -4399,7 +4415,7 @@ mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* GetIoUnitPage2 - Retrieve BIOS version and boot order information.
* @ioc: Pointer to MPT_ADAPTER structure
*
......@@ -4457,7 +4473,8 @@ GetIoUnitPage2(MPT_ADAPTER *ioc)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
/**
* mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
* @ioc: Pointer to a Adapter Strucutre
* @portnum: IOC port number
*
......@@ -4644,7 +4661,8 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* mpt_readScsiDevicePageHeaders - save version and length of SDP1
/**
* mpt_readScsiDevicePageHeaders - save version and length of SDP1
* @ioc: Pointer to a Adapter Strucutre
* @portnum: IOC port number
*
......@@ -4996,9 +5014,8 @@ mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* SendEventNotification - Send EventNotification (on or off) request
* to MPT adapter.
/**
* SendEventNotification - Send EventNotification (on or off) request to adapter
* @ioc: Pointer to MPT_ADAPTER structure
* @EvSwitch: Event switch flags
*/
......@@ -5062,8 +5079,8 @@ SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_config - Generic function to issue config message
* @ioc - Pointer to an adapter structure
* @cfg - Pointer to a configuration structure. Struct contains
* @ioc: Pointer to an adapter structure
* @pCfg: Pointer to a configuration structure. Struct contains
* action, page address, direction, physical address
* and pointer to a configuration page header
* Page header is updated.
......@@ -5188,8 +5205,8 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_timer_expired - Call back for timer process.
/**
* mpt_timer_expired - Callback for timer process.
* Used only internal config functionality.
* @data: Pointer to MPT_SCSI_HOST recast as an unsigned long
*/
......@@ -5214,12 +5231,12 @@ mpt_timer_expired(unsigned long data)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_ioc_reset - Base cleanup for hard reset
* @ioc: Pointer to the adapter structure
* @reset_phase: Indicates pre- or post-reset functionality
*
* Remark: Free's resources with internally generated commands.
* Remark: Frees resources with internally generated commands.
*/
static int
mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
......@@ -5271,7 +5288,7 @@ mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
* procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
*
* Returns 0 for success, non-zero for failure.
......@@ -5297,7 +5314,7 @@ procmpt_create(void)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
*
* Returns 0 for success, non-zero for failure.
......@@ -5311,16 +5328,16 @@ procmpt_destroy(void)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* procmpt_summary_read - Handle read request from /proc/mpt/summary
* or from /proc/mpt/iocN/summary.
/**
* procmpt_summary_read - Handle read request of a summary file
* @buf: Pointer to area to write information
* @start: Pointer to start pointer
* @offset: Offset to start writing
* @request:
* @request: Amount of read data requested
* @eof: Pointer to EOF integer
* @data: Pointer
*
* Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
* Returns number of characters written to process performing the read.
*/
static int
......@@ -5355,12 +5372,12 @@ procmpt_summary_read(char *buf, char **start, off_t offset, int request, int *eo
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* procmpt_version_read - Handle read request from /proc/mpt/version.
* @buf: Pointer to area to write information
* @start: Pointer to start pointer
* @offset: Offset to start writing
* @request:
* @request: Amount of read data requested
* @eof: Pointer to EOF integer
* @data: Pointer
*
......@@ -5411,12 +5428,12 @@ procmpt_version_read(char *buf, char **start, off_t offset, int request, int *eo
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* procmpt_iocinfo_read - Handle read request from /proc/mpt/iocN/info.
* @buf: Pointer to area to write information
* @start: Pointer to start pointer
* @offset: Offset to start writing
* @request:
* @request: Amount of read data requested
* @eof: Pointer to EOF integer
* @data: Pointer
*
......@@ -5577,16 +5594,17 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_HardResetHandler - Generic reset handler, issue SCSI Task
* Management call based on input arg values. If TaskMgmt fails,
* return associated SCSI request.
* mpt_HardResetHandler - Generic reset handler
* @ioc: Pointer to MPT_ADAPTER structure
* @sleepFlag: Indicates if sleep or schedule must be called.
*
* Issues SCSI Task Management call based on input arg values.
* If TaskMgmt fails, returns associated SCSI request.
*
* Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
* or a non-interrupt thread. In the former, must not call schedule().
*
* Remark: A return of -1 is a FATAL error case, as it means a
* Note: A return of -1 is a FATAL error case, as it means a
* FW reload/initialization failed.
*
* Returns 0 for SUCCESS or -1 if FAILED.
......@@ -5935,13 +5953,14 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* ProcessEventNotification - Route a received EventNotificationReply to
* all currently regeistered event handlers.
/**
* ProcessEventNotification - Route EventNotificationReply to all event handlers
* @ioc: Pointer to MPT_ADAPTER structure
* @pEventReply: Pointer to EventNotification reply frame
* @evHandlers: Pointer to integer, number of event handlers
*
* Routes a received EventNotificationReply to all currently registered
* event handlers.
* Returns sum of event handlers return values.
*/
static int
......@@ -6056,7 +6075,7 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_fc_log_info - Log information returned from Fibre Channel IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @log_info: U32 LogInfo reply word from the IOC
......@@ -6077,7 +6096,7 @@ mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @mr: Pointer to MPT reply frame
......@@ -6200,7 +6219,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
};
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_sas_log_info - Log information returned from SAS IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @log_info: U32 LogInfo reply word from the IOC
......@@ -6255,7 +6274,7 @@ union loginfo_type {
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @ioc_status: U32 IOCStatus word from IOC
......@@ -6416,7 +6435,7 @@ EXPORT_SYMBOL(mpt_free_fw_memory);
EXPORT_SYMBOL(mptbase_sas_persist_operation);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* fusion_init - Fusion MPT base driver initialization routine.
*
* Returns 0 for success, non-zero for failure.
......@@ -6456,7 +6475,7 @@ fusion_init(void)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
/**
* fusion_exit - Perform driver unload cleanup.
*
* This routine frees all resources associated with each MPT adapter
......
......@@ -1395,8 +1395,7 @@ mptfc_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptfc_init - Register MPT adapter(s) as SCSI host(s) with
* linux scsi mid-layer.
* mptfc_init - Register MPT adapter(s) as SCSI host(s) with SCSI mid-layer.
*
* Returns 0 for success, non-zero for failure.
*/
......@@ -1440,7 +1439,7 @@ mptfc_init(void)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptfc_remove - Removed fc infrastructure for devices
* mptfc_remove - Remove fc infrastructure for devices
* @pdev: Pointer to pci_dev structure
*
*/
......
......@@ -1230,15 +1230,15 @@ mptscsih_host_info(MPT_ADAPTER *ioc, char *pbuf, off_t offset, int len)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptscsih_proc_info - Return information about MPT adapter
* @host: scsi host struct
* @buffer: if write, user data; if read, buffer for user
* @start: returns the buffer address
* @offset: if write, 0; if read, the current offset into the buffer from
* the previous read.
* @length: if write, return length;
* @func: write = 1; read = 0
*
* (linux scsi_host_template.info routine)
*
* buffer: if write, user data; if read, buffer for user
* length: if write, return length;
* offset: if write, 0; if read, the current offset into the buffer from
* the previous read.
* hostno: scsi host number
* func: if write = 1; if read = 0
*/
int
mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
......@@ -1902,8 +1902,7 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptscsih_host_reset - Perform a SCSI host adapter RESET!
* new_eh variant
* mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant)
* @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
*
* (linux scsi_host_template.eh_host_reset_handler routine)
......@@ -1949,8 +1948,7 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptscsih_tm_pending_wait - wait for pending task management request to
* complete.
* mptscsih_tm_pending_wait - wait for pending task management request to complete
* @hd: Pointer to MPT host structure.
*
* Returns {SUCCESS,FAILED}.
......@@ -1982,6 +1980,7 @@ mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
/**
* mptscsih_tm_wait_for_completion - wait for completion of TM task
* @hd: Pointer to MPT host structure.
* @timeout: timeout in seconds
*
* Returns {SUCCESS,FAILED}.
*/
......@@ -3429,8 +3428,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
/**
* mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks.
* @hd: Pointer to a SCSI HOST structure
* @vtarget: per device private data
* @lun: lun
* @vdevice: virtual target device
*
* Uses the ISR, but with special processing.
* MUST be single-threaded.
......
......@@ -1100,8 +1100,7 @@ static struct pci_driver mptspi_driver = {
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptspi_init - Register MPT adapter(s) as SCSI host(s) with
* linux scsi mid-layer.
* mptspi_init - Register MPT adapter(s) as SCSI host(s) with SCSI mid-layer.
*
* Returns 0 for success, non-zero for failure.
*/
......@@ -1135,7 +1134,6 @@ mptspi_init(void)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptspi_exit - Unregisters MPT adapter(s)
*
*/
static void __exit
mptspi_exit(void)
......
......@@ -56,6 +56,9 @@ static int i2o_bus_scan(struct i2o_device *dev)
/**
* i2o_bus_store_scan - Scan the I2O Bus Adapter
* @d: device which should be scanned
* @attr: device_attribute
* @buf: output buffer
* @count: buffer size
*
* Returns count.
*/
......
......@@ -54,8 +54,8 @@ static inline int i2o_device_issue_claim(struct i2o_device *dev, u32 cmd,
* @dev: I2O device to claim
* @drv: I2O driver which wants to claim the device
*
* Do the leg work to assign a device to a given OSM. If the claim succeed
* the owner of the rimary. If the attempt fails a negative errno code
* Do the leg work to assign a device to a given OSM. If the claim succeeds,
* the owner is the primary. If the attempt fails a negative errno code
* is returned. On success zero is returned.
*/
int i2o_device_claim(struct i2o_device *dev)
......@@ -208,7 +208,7 @@ static struct i2o_device *i2o_device_alloc(void)
/**
* i2o_device_add - allocate a new I2O device and add it to the IOP
* @iop: I2O controller where the device is on
* @c: I2O controller that the device is on
* @entry: LCT entry of the I2O device
*
* Allocate a new I2O device and initialize it with the LCT entry. The
......@@ -280,7 +280,7 @@ static int i2o_device_add(struct i2o_controller *c, i2o_lct_entry *entry)
/**
* i2o_device_remove - remove an I2O device from the I2O core
* @dev: I2O device which should be released
* @i2o_dev: I2O device which should be released
*
* Is used on I2O controller removal or LCT modification, when the device
* is removed from the system. Note that the device could still hang
......
......@@ -34,9 +34,7 @@ static spinlock_t i2o_drivers_lock;
static struct i2o_driver **i2o_drivers;
/**
* i2o_bus_match - Tell if a I2O device class id match the class ids of
* the I2O driver (OSM)
*
* i2o_bus_match - Tell if I2O device class id matches the class ids of the I2O driver (OSM)
* @dev: device which should be verified
* @drv: the driver to match against
*
......@@ -248,7 +246,7 @@ int i2o_driver_dispatch(struct i2o_controller *c, u32 m)
/**
* i2o_driver_notify_controller_add_all - Send notify of added controller
* to all I2O drivers
* @c: newly added controller
*
* Send notifications to all registered drivers that a new controller was
* added.
......@@ -267,8 +265,8 @@ void i2o_driver_notify_controller_add_all(struct i2o_controller *c)
}
/**
* i2o_driver_notify_controller_remove_all - Send notify of removed
* controller to all I2O drivers
* i2o_driver_notify_controller_remove_all - Send notify of removed controller
* @c: controller that is being removed
*
* Send notifications to all registered drivers that a controller was
* removed.
......@@ -287,8 +285,8 @@ void i2o_driver_notify_controller_remove_all(struct i2o_controller *c)
}
/**
* i2o_driver_notify_device_add_all - Send notify of added device to all
* I2O drivers
* i2o_driver_notify_device_add_all - Send notify of added device
* @i2o_dev: newly added I2O device
*
* Send notifications to all registered drivers that a device was added.
*/
......@@ -306,8 +304,8 @@ void i2o_driver_notify_device_add_all(struct i2o_device *i2o_dev)
}
/**
* i2o_driver_notify_device_remove_all - Send notify of removed device to
* all I2O drivers
* i2o_driver_notify_device_remove_all - Send notify of removed device
* @i2o_dev: device that is being removed
*
* Send notifications to all registered drivers that a device was removed.
*/
......@@ -362,7 +360,7 @@ int __init i2o_driver_init(void)
/**
* i2o_driver_exit - clean up I2O drivers (OSMs)
*
* Unregisters the I2O bus and free driver array.
* Unregisters the I2O bus and frees driver array.
*/
void __exit i2o_driver_exit(void)
{
......
......@@ -94,8 +94,8 @@ static struct i2o_exec_wait *i2o_exec_wait_alloc(void)
};
/**
* i2o_exec_wait_free - Free a i2o_exec_wait struct
* @i2o_exec_wait: I2O wait data which should be cleaned up
* i2o_exec_wait_free - Free an i2o_exec_wait struct
* @wait: I2O wait data which should be cleaned up
*/
static void i2o_exec_wait_free(struct i2o_exec_wait *wait)
{
......@@ -105,7 +105,7 @@ static void i2o_exec_wait_free(struct i2o_exec_wait *wait)
/**
* i2o_msg_post_wait_mem - Post and wait a message with DMA buffers
* @c: controller
* @m: message to post
* @msg: message to post
* @timeout: time in seconds to wait
* @dma: i2o_dma struct of the DMA buffer to free on failure
*
......@@ -269,6 +269,7 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m,
/**
* i2o_exec_show_vendor_id - Displays Vendor ID of controller
* @d: device of which the Vendor ID should be displayed
* @attr: device_attribute to display
* @buf: buffer into which the Vendor ID should be printed
*
* Returns number of bytes printed into buffer.
......@@ -290,6 +291,7 @@ static ssize_t i2o_exec_show_vendor_id(struct device *d,
/**
* i2o_exec_show_product_id - Displays Product ID of controller
* @d: device of which the Product ID should be displayed
* @attr: device_attribute to display
* @buf: buffer into which the Product ID should be printed
*
* Returns number of bytes printed into buffer.
......@@ -365,7 +367,7 @@ static int i2o_exec_remove(struct device *dev)
/**
* i2o_exec_lct_modified - Called on LCT NOTIFY reply
* @c: I2O controller on which the LCT has modified
* @work: work struct for a specific controller
*
* This function handles asynchronus LCT NOTIFY replies. It parses the
* new LCT and if the buffer for the LCT was to small sends a LCT NOTIFY
......
......@@ -259,7 +259,7 @@ static int i2o_block_device_unlock(struct i2o_device *dev, u32 media_id)
/**
* i2o_block_device_power - Power management for device dev
* @dev: I2O device which should receive the power management request
* @operation: Operation which should be send
* @op: Operation to send
*
* Send a power management request to the device dev.
*
......@@ -315,7 +315,7 @@ static inline struct i2o_block_request *i2o_block_request_alloc(void)
* i2o_block_request_free - Frees a I2O block request
* @ireq: I2O block request which should be freed
*
* Fres the allocated memory (give it back to the request mempool).
* Frees the allocated memory (give it back to the request mempool).
*/
static inline void i2o_block_request_free(struct i2o_block_request *ireq)
{
......@@ -326,6 +326,7 @@ static inline void i2o_block_request_free(struct i2o_block_request *ireq)
* i2o_block_sglist_alloc - Allocate the SG list and map it
* @c: I2O controller to which the request belongs
* @ireq: I2O block request
* @mptr: message body pointer
*
* Builds the SG list and map it to be accessable by the controller.
*
......@@ -490,7 +491,7 @@ static void i2o_block_end_request(struct request *req, int uptodate,
* i2o_block_reply - Block OSM reply handler.
* @c: I2O controller from which the message arrives
* @m: message id of reply
* qmsg: the actuall I2O message reply
* @msg: the actual I2O message reply
*
* This function gets all the message replies.
*
......@@ -602,6 +603,8 @@ static void i2o_block_biosparam(unsigned long capacity, unsigned short *cyls,
/**
* i2o_block_open - Open the block device
* @inode: inode for block device being opened
* @file: file to open
*
* Power up the device, mount and lock the media. This function is called,
* if the block device is opened for access.
......@@ -629,6 +632,8 @@ static int i2o_block_open(struct inode *inode, struct file *file)
/**
* i2o_block_release - Release the I2O block device
* @inode: inode for block device being released
* @file: file to close
*
* Unlock and unmount the media, and power down the device. Gets called if
* the block device is closed.
......@@ -675,6 +680,8 @@ static int i2o_block_getgeo(struct block_device *bdev, struct hd_geometry *geo)
/**
* i2o_block_ioctl - Issue device specific ioctl calls.
* @inode: inode for block device ioctl
* @file: file for ioctl
* @cmd: ioctl command
* @arg: arg
*
......@@ -902,7 +909,7 @@ static int i2o_block_transfer(struct request *req)
/**
* i2o_block_request_fn - request queue handling function
* q: request queue from which the request could be fetched
* @q: request queue from which the request could be fetched
*
* Takes the next request from the queue, transfers it and if no error
* occurs dequeue it from the queue. On arrival of the reply the message
......
......@@ -163,7 +163,7 @@ static int print_serial_number(struct seq_file *seq, u8 * serialno, int max_len)
* i2o_get_class_name - do i2o class name lookup
* @class: class number
*
* Return a descriptive string for an i2o class
* Return a descriptive string for an i2o class.
*/
static const char *i2o_get_class_name(int class)
{
......
......@@ -411,8 +411,7 @@ static void i2o_scsi_notify_device_add(struct i2o_device *i2o_dev)
};
/**
* i2o_scsi_notify_device_remove - Retrieve notifications of removed
* devices
* i2o_scsi_notify_device_remove - Retrieve notifications of removed devices
* @i2o_dev: the I2O device which was removed
*
* If a I2O device is removed, we catch the notification to remove the
......@@ -432,8 +431,7 @@ static void i2o_scsi_notify_device_remove(struct i2o_device *i2o_dev)
};
/**
* i2o_scsi_notify_controller_add - Retrieve notifications of added
* controllers
* i2o_scsi_notify_controller_add - Retrieve notifications of added controllers
* @c: the controller which was added
*
* If a I2O controller is added, we catch the notification to add a
......@@ -463,8 +461,7 @@ static void i2o_scsi_notify_controller_add(struct i2o_controller *c)
};
/**
* i2o_scsi_notify_controller_remove - Retrieve notifications of removed
* controllers
* i2o_scsi_notify_controller_remove - Retrieve notifications of removed controllers
* @c: the controller which was removed
*
* If a I2O controller is removed, we catch the notification to remove the
......@@ -751,7 +748,7 @@ static int i2o_scsi_abort(struct scsi_cmnd *SCpnt)
* @capacity: size in sectors
* @ip: geometry array
*
* This is anyones guess quite frankly. We use the same rules everyone
* This is anyone's guess quite frankly. We use the same rules everyone
* else appears to and hope. It seems to work.
*/
......
......@@ -259,6 +259,7 @@ static irqreturn_t i2o_pci_interrupt(int irq, void *dev_id)
/**
* i2o_pci_irq_enable - Allocate interrupt for I2O controller
* @c: i2o_controller that the request is for
*
* Allocate an interrupt for the I2O controller, and activate interrupts
* on the I2O controller.
......@@ -305,7 +306,7 @@ static void i2o_pci_irq_disable(struct i2o_controller *c)
/**
* i2o_pci_probe - Probe the PCI device for an I2O controller
* @dev: PCI device to test
* @pdev: PCI device to test
* @id: id which matched with the PCI device id table
*
* Probe the PCI device for any device which is a memory of the
......@@ -447,7 +448,7 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev,
/**
* i2o_pci_remove - Removes a I2O controller from the system
* pdev: I2O controller which should be removed
* @pdev: I2O controller which should be removed
*
* Reset the I2O controller, disable interrupts and remove all allocated
* resources.
......
......@@ -986,7 +986,8 @@ extern void i2o_driver_unregister(struct i2o_driver *);
/**
* i2o_driver_notify_controller_add - Send notification of added controller
* to a single I2O driver
* @drv: I2O driver
* @c: I2O controller
*
* Send notification of added controller to a single registered driver.
*/
......@@ -998,8 +999,9 @@ static inline void i2o_driver_notify_controller_add(struct i2o_driver *drv,
};
/**
* i2o_driver_notify_controller_remove - Send notification of removed
* controller to a single I2O driver
* i2o_driver_notify_controller_remove - Send notification of removed controller
* @drv: I2O driver
* @c: I2O controller
*
* Send notification of removed controller to a single registered driver.
*/
......@@ -1011,8 +1013,9 @@ static inline void i2o_driver_notify_controller_remove(struct i2o_driver *drv,
};
/**
* i2o_driver_notify_device_add - Send notification of added device to a
* single I2O driver
* i2o_driver_notify_device_add - Send notification of added device
* @drv: I2O driver
* @i2o_dev: the added i2o_device
*
* Send notification of added device to a single registered driver.
*/
......@@ -1025,7 +1028,8 @@ static inline void i2o_driver_notify_device_add(struct i2o_driver *drv,
/**
* i2o_driver_notify_device_remove - Send notification of removed device
* to a single I2O driver
* @drv: I2O driver
* @i2o_dev: the added i2o_device
*
* Send notification of removed device to a single registered driver.
*/
......@@ -1148,7 +1152,7 @@ static inline void i2o_msg_post(struct i2o_controller *c,
/**
* i2o_msg_post_wait - Post and wait a message and wait until return
* @c: controller
* @m: message to post
* @msg: message to post
* @timeout: time in seconds to wait
*
* This API allows an OSM to post a message and then be told whether or
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册