提交 d84adcf4 编写于 作者: K Kevin Hilman

OMAP2+: voltage: move VC into struct voltagedomain, misc. renames

Move the VC instance struct from omap_vdd_info into struct voltagedomain.
While moving, perform some misc. renames for readability.

No functional changes.

Summary of renames:
- rename omap_vc_instance to omap_vc_channel, since there is only
  one instance of the VC IP and this actually represents channels
  using TRM terminology.
- rename 'vc_common' field of VC channel which led to:
  s/vc->vc_common/vc->common/
- remove redundant '_data' suffix
- OMAP3: vc1 --> vc_mpu, vc2 --> vc_core
- omap_vc_bypass_scale_voltage() -> omap_vc_bypass_scale()
Signed-off-by: NKevin Hilman <khilman@ti.com>

merge
上级 ccd5ca77
......@@ -24,14 +24,12 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm,
unsigned long target_volt,
u8 *target_vsel, u8 *current_vsel)
{
struct omap_vc_instance_data *vc = voltdm->vdd->vc_data;
struct omap_vc_channel *vc = voltdm->vc;
struct omap_vdd_info *vdd = voltdm->vdd;
struct omap_volt_data *volt_data;
const struct omap_vc_common_data *vc_common;
const struct omap_vp_common_data *vp_common;
u32 vc_cmdval, vp_errgain_val;
vc_common = vc->vc_common;
vp_common = vdd->vp_data->vp_common;
/* Check if sufficient pmic info is available for this vdd */
......@@ -63,10 +61,10 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm,
*current_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage);
/* Setting the ON voltage to the new target voltage */
vc_cmdval = vdd->read_reg(vc->vc_common->prm_mod, vc->cmdval_reg);
vc_cmdval &= ~vc_common->cmd_on_mask;
vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift);
vdd->write_reg(vc_cmdval, vc->vc_common->prm_mod, vc->cmdval_reg);
vc_cmdval = vdd->read_reg(vc->common->prm_mod, vc->cmdval_reg);
vc_cmdval &= ~vc->common->cmd_on_mask;
vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift);
vdd->write_reg(vc_cmdval, vc->common->prm_mod, vc->cmdval_reg);
/* Setting vp errorgain based on the voltage */
if (volt_data) {
......@@ -99,11 +97,11 @@ void omap_vc_post_scale(struct voltagedomain *voltdm,
vdd->curr_volt = target_volt;
}
/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */
int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm,
/* vc_bypass_scale - VC bypass method of voltage scaling */
int omap_vc_bypass_scale(struct voltagedomain *voltdm,
unsigned long target_volt)
{
struct omap_vc_instance_data *vc = voltdm->vdd->vc_data;
struct omap_vc_channel *vc = voltdm->vc;
struct omap_vdd_info *vdd = voltdm->vdd;
u32 loop_cnt = 0, retries_cnt = 0;
u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
......@@ -114,19 +112,19 @@ int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm,
if (ret)
return ret;
vc_valid = vc->vc_common->valid;
vc_bypass_val_reg = vc->vc_common->bypass_val_reg;
vc_bypass_value = (target_vsel << vc->vc_common->data_shift) |
vc_valid = vc->common->valid;
vc_bypass_val_reg = vc->common->bypass_val_reg;
vc_bypass_value = (target_vsel << vc->common->data_shift) |
(vdd->pmic_info->pmic_reg <<
vc->vc_common->regaddr_shift) |
vc->common->regaddr_shift) |
(vdd->pmic_info->i2c_slave_addr <<
vc->vc_common->slaveaddr_shift);
vc->common->slaveaddr_shift);
vdd->write_reg(vc_bypass_value, vc->vc_common->prm_mod, vc_bypass_val_reg);
vdd->write_reg(vc_bypass_value | vc_valid, vc->vc_common->prm_mod,
vdd->write_reg(vc_bypass_value, vc->common->prm_mod, vc_bypass_val_reg);
vdd->write_reg(vc_bypass_value | vc_valid, vc->common->prm_mod,
vc_bypass_val_reg);
vc_bypass_value = vdd->read_reg(vc->vc_common->prm_mod, vc_bypass_val_reg);
vc_bypass_value = vdd->read_reg(vc->common->prm_mod, vc_bypass_val_reg);
/*
* Loop till the bypass command is acknowledged from the SMPS.
* NOTE: This is legacy code. The loop count and retry count needs
......@@ -145,7 +143,7 @@ int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm,
loop_cnt = 0;
udelay(10);
}
vc_bypass_value = vdd->read_reg(vc->vc_common->prm_mod,
vc_bypass_value = vdd->read_reg(vc->common->prm_mod,
vc_bypass_val_reg);
}
......@@ -155,23 +153,23 @@ int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm,
static void __init omap3_vfsm_init(struct voltagedomain *voltdm)
{
struct omap_vc_instance_data *vc = voltdm->vdd->vc_data;
struct omap_vc_channel *vc = voltdm->vc;
struct omap_vdd_info *vdd = voltdm->vdd;
/*
* Voltage Manager FSM parameters init
* XXX This data should be passed in from the board file
*/
vdd->write_reg(OMAP3_CLKSETUP, vc->vc_common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET);
vdd->write_reg(OMAP3_VOLTOFFSET, vc->vc_common->prm_mod,
vdd->write_reg(OMAP3_CLKSETUP, vc->common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET);
vdd->write_reg(OMAP3_VOLTOFFSET, vc->common->prm_mod,
OMAP3_PRM_VOLTOFFSET_OFFSET);
vdd->write_reg(OMAP3_VOLTSETUP2, vc->vc_common->prm_mod,
vdd->write_reg(OMAP3_VOLTSETUP2, vc->common->prm_mod,
OMAP3_PRM_VOLTSETUP2_OFFSET);
}
static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
{
struct omap_vc_instance_data *vc = voltdm->vdd->vc_data;
struct omap_vc_channel *vc = voltdm->vc;
struct omap_vdd_info *vdd = voltdm->vdd;
static bool is_initialized;
u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
......@@ -185,19 +183,19 @@ static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt);
ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt);
off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt);
vc_val = ((on_vsel << vc->vc_common->cmd_on_shift) |
(onlp_vsel << vc->vc_common->cmd_onlp_shift) |
(ret_vsel << vc->vc_common->cmd_ret_shift) |
(off_vsel << vc->vc_common->cmd_off_shift));
vdd->write_reg(vc_val, vc->vc_common->prm_mod, vc->cmdval_reg);
vc_val = ((on_vsel << vc->common->cmd_on_shift) |
(onlp_vsel << vc->common->cmd_onlp_shift) |
(ret_vsel << vc->common->cmd_ret_shift) |
(off_vsel << vc->common->cmd_off_shift));
vdd->write_reg(vc_val, vc->common->prm_mod, vc->cmdval_reg);
/*
* Generic VC parameters init
* XXX This data should be abstracted out
*/
vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vc->vc_common->prm_mod,
vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vc->common->prm_mod,
OMAP3_PRM_VC_CH_CONF_OFFSET);
vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vc->vc_common->prm_mod,
vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vc->common->prm_mod,
OMAP3_PRM_VC_I2C_CFG_OFFSET);
omap3_vfsm_init(voltdm);
......@@ -209,7 +207,7 @@ static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
/* OMAP4 specific voltage init functions */
static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
{
struct omap_vc_instance_data *vc = voltdm->vdd->vc_data;
struct omap_vc_channel *vc = voltdm->vc;
struct omap_vdd_info *vdd = voltdm->vdd;
static bool is_initialized;
u32 vc_val;
......@@ -226,18 +224,18 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK |
OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK |
OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK);
vdd->write_reg(vc_val, vc->vc_common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
vdd->write_reg(vc_val, vc->common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
/* XXX These are magic numbers and do not belong! */
vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
vdd->write_reg(vc_val, vc->vc_common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
vdd->write_reg(vc_val, vc->common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
is_initialized = true;
}
void __init omap_vc_init_channel(struct voltagedomain *voltdm)
{
struct omap_vc_instance_data *vc = voltdm->vdd->vc_data;
struct omap_vc_channel *vc = voltdm->vc;
struct omap_vdd_info *vdd = voltdm->vdd;
u32 vc_val;
......@@ -255,27 +253,27 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
}
/* Set up the SMPS_SA(i2c slave address in VC */
vc_val = vdd->read_reg(vc->vc_common->prm_mod,
vc->vc_common->smps_sa_reg);
vc_val = vdd->read_reg(vc->common->prm_mod,
vc->common->smps_sa_reg);
vc_val &= ~vc->smps_sa_mask;
vc_val |= vdd->pmic_info->i2c_slave_addr << vc->smps_sa_shift;
vdd->write_reg(vc_val, vc->vc_common->prm_mod,
vc->vc_common->smps_sa_reg);
vdd->write_reg(vc_val, vc->common->prm_mod,
vc->common->smps_sa_reg);
/* Setup the VOLRA(pmic reg addr) in VC */
vc_val = vdd->read_reg(vc->vc_common->prm_mod,
vc->vc_common->smps_volra_reg);
vc_val = vdd->read_reg(vc->common->prm_mod,
vc->common->smps_volra_reg);
vc_val &= ~vc->smps_volra_mask;
vc_val |= vdd->pmic_info->pmic_reg << vc->smps_volra_shift;
vdd->write_reg(vc_val, vc->vc_common->prm_mod,
vc->vc_common->smps_volra_reg);
vdd->write_reg(vc_val, vc->common->prm_mod,
vc->common->smps_volra_reg);
/* Configure the setup times */
vc_val = vdd->read_reg(vc->vc_common->prm_mod, vdd->vfsm->voltsetup_reg);
vc_val = vdd->read_reg(vc->common->prm_mod, vdd->vfsm->voltsetup_reg);
vc_val &= ~vdd->vfsm->voltsetup_mask;
vc_val |= vdd->pmic_info->volt_setup_time <<
vdd->vfsm->voltsetup_shift;
vdd->write_reg(vc_val, vc->vc_common->prm_mod, vdd->vfsm->voltsetup_reg);
vdd->write_reg(vc_val, vc->common->prm_mod, vdd->vfsm->voltsetup_reg);
if (cpu_is_omap34xx())
omap3_vc_init_channel(voltdm);
......
......@@ -22,7 +22,7 @@
struct voltagedomain;
/**
* struct omap_vc_common_data - per-VC register/bitfield data
* struct omap_vc_common - per-VC register/bitfield data
* @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register
* @valid: VALID bitmask in PRM_VC_BYPASS_VAL register
* @prm_mod: PRM module id used for PRM register access
......@@ -40,7 +40,7 @@ struct voltagedomain;
* XXX One of cmd_on_mask and cmd_on_shift are not needed
* XXX VALID should probably be a shift, not a mask
*/
struct omap_vc_common_data {
struct omap_vc_common {
u32 cmd_on_mask;
u32 valid;
s16 prm_mod;
......@@ -57,8 +57,8 @@ struct omap_vc_common_data {
};
/**
* struct omap_vc_instance_data - VC per-instance data
* @vc_common: pointer to VC common data for this platform
* struct omap_vc_channel - VC per-instance data
* @common: pointer to VC common data for this platform
* @smps_sa_mask: SA* bitmask in the PRM_VC_SMPS_SA register
* @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
* @smps_sa_shift: SA* field shift in the PRM_VC_SMPS_SA register
......@@ -67,8 +67,8 @@ struct omap_vc_common_data {
* XXX It is not necessary to have both a *_mask and a *_shift -
* remove one
*/
struct omap_vc_instance_data {
const struct omap_vc_common_data *vc_common;
struct omap_vc_channel {
const struct omap_vc_common *common;
u32 smps_sa_mask;
u32 smps_volra_mask;
u8 cmdval_reg;
......@@ -76,12 +76,12 @@ struct omap_vc_instance_data {
u8 smps_volra_shift;
};
extern struct omap_vc_instance_data omap3_vc1_data;
extern struct omap_vc_instance_data omap3_vc2_data;
extern struct omap_vc_channel omap3_vc_mpu;
extern struct omap_vc_channel omap3_vc_core;
extern struct omap_vc_instance_data omap4_vc_mpu_data;
extern struct omap_vc_instance_data omap4_vc_iva_data;
extern struct omap_vc_instance_data omap4_vc_core_data;
extern struct omap_vc_channel omap4_vc_mpu;
extern struct omap_vc_channel omap4_vc_iva;
extern struct omap_vc_channel omap4_vc_core;
void omap_vc_init_channel(struct voltagedomain *voltdm);
int omap_vc_pre_scale(struct voltagedomain *voltdm,
......@@ -90,7 +90,7 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm,
void omap_vc_post_scale(struct voltagedomain *voltdm,
unsigned long target_volt,
u8 target_vsel, u8 current_vsel);
int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm,
int omap_vc_bypass_scale(struct voltagedomain *voltdm,
unsigned long target_volt);
#endif
......
......@@ -29,7 +29,7 @@
* VC data common to 34xx/36xx chips
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
static struct omap_vc_common_data omap3_vc_common = {
static struct omap_vc_common omap3_vc_common = {
.prm_mod = OMAP3430_GR_MOD,
.smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
.smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
......@@ -45,8 +45,8 @@ static struct omap_vc_common_data omap3_vc_common = {
.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT,
};
struct omap_vc_instance_data omap3_vc1_data = {
.vc_common = &omap3_vc_common,
struct omap_vc_channel omap3_vc_mpu = {
.common = &omap3_vc_common,
.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET,
.smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT,
.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK,
......@@ -54,8 +54,8 @@ struct omap_vc_instance_data omap3_vc1_data = {
.smps_volra_mask = OMAP3430_VOLRA0_MASK,
};
struct omap_vc_instance_data omap3_vc2_data = {
.vc_common = &omap3_vc_common,
struct omap_vc_channel omap3_vc_core = {
.common = &omap3_vc_common,
.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET,
.smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT,
.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK,
......
......@@ -30,7 +30,7 @@
* VC data common to 44xx chips
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
static const struct omap_vc_common_data omap4_vc_common = {
static const struct omap_vc_common omap4_vc_common = {
.prm_mod = OMAP4430_PRM_DEVICE_INST,
.smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
.smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
......@@ -47,8 +47,8 @@ static const struct omap_vc_common_data omap4_vc_common = {
};
/* VC instance data for each controllable voltage line */
struct omap_vc_instance_data omap4_vc_mpu_data = {
.vc_common = &omap4_vc_common,
struct omap_vc_channel omap4_vc_mpu = {
.common = &omap4_vc_common,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET,
.smps_sa_shift = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK,
......@@ -56,8 +56,8 @@ struct omap_vc_instance_data omap4_vc_mpu_data = {
.smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK,
};
struct omap_vc_instance_data omap4_vc_iva_data = {
.vc_common = &omap4_vc_common,
struct omap_vc_channel omap4_vc_iva = {
.common = &omap4_vc_common,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET,
.smps_sa_shift = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK,
......@@ -65,8 +65,8 @@ struct omap_vc_instance_data omap4_vc_iva_data = {
.smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK,
};
struct omap_vc_instance_data omap4_vc_core_data = {
.vc_common = &omap4_vc_common,
struct omap_vc_channel omap4_vc_core = {
.common = &omap4_vc_common,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET,
.smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK,
......
......@@ -769,7 +769,7 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm,
vdd->volt_scale = vp_forceupdate_scale_voltage;
return;
case VOLTSCALE_VCBYPASS:
vdd->volt_scale = omap_vc_bypass_scale_voltage;
vdd->volt_scale = omap_vc_bypass_scale;
return;
default:
pr_warning("%s: Trying to change the method of voltage scaling"
......@@ -802,10 +802,12 @@ int __init omap_voltage_late_init(void)
if (!voltdm->scalable)
continue;
if (voltdm->vc)
omap_vc_init_channel(voltdm);
if (voltdm->vdd) {
if (omap_vdd_data_configure(voltdm))
continue;
omap_vc_init_channel(voltdm);
vp_init(voltdm);
vdd_debugfs_init(voltdm);
}
......
......@@ -58,6 +58,7 @@ struct omap_vfsm_instance_data {
* @scalable: Whether or not this voltage domain is scalable
* @node: list_head linking all voltage domains
* @pwrdm_list: list_head linking all powerdomains in this voltagedomain
* @vc: pointer to VC channel associated with this voltagedomain
* @vdd: to be removed
*/
struct voltagedomain {
......@@ -65,6 +66,8 @@ struct voltagedomain {
bool scalable;
struct list_head node;
struct list_head pwrdm_list;
struct omap_vc_channel *vc;
struct omap_vdd_info *vdd;
};
......@@ -124,8 +127,6 @@ struct omap_volt_pmic_info {
* @vp_data : the register values, shifts, masks for various
* vp registers
* @vp_rt_data : VP data derived at runtime, not predefined
* @vc_data : structure containing various various vc registers,
* shifts, masks etc.
* @vfsm : voltage manager FSM data
* @debug_dir : debug directory for this voltage domain.
* @curr_volt : current voltage for this vdd.
......@@ -138,7 +139,6 @@ struct omap_vdd_info {
struct omap_volt_pmic_info *pmic_info;
struct omap_vp_instance_data *vp_data;
struct omap_vp_runtime_data vp_rt_data;
struct omap_vc_instance_data *vc_data;
const struct omap_vfsm_instance_data *vfsm;
struct dentry *debug_dir;
u32 curr_volt;
......
......@@ -41,7 +41,6 @@ static struct omap_vdd_info omap3_vdd1_info = {
.prm_irqst_mod = OCP_MOD,
.prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
.vp_data = &omap3_vp1_data,
.vc_data = &omap3_vc1_data,
.vfsm = &omap3_vdd1_vfsm_data,
};
......@@ -55,19 +54,20 @@ static struct omap_vdd_info omap3_vdd2_info = {
.prm_irqst_mod = OCP_MOD,
.prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
.vp_data = &omap3_vp2_data,
.vc_data = &omap3_vc2_data,
.vfsm = &omap3_vdd2_vfsm_data,
};
static struct voltagedomain omap3_voltdm_mpu = {
.name = "mpu_iva",
.scalable = true,
.vc = &omap3_vc_mpu,
.vdd = &omap3_vdd1_info,
};
static struct voltagedomain omap3_voltdm_core = {
.name = "core",
.scalable = true,
.vc = &omap3_vc_core,
.vdd = &omap3_vdd2_info,
};
......
......@@ -40,7 +40,6 @@ static struct omap_vdd_info omap4_vdd_mpu_info = {
.prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST,
.prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET,
.vp_data = &omap4_vp_mpu_data,
.vc_data = &omap4_vc_mpu_data,
.vfsm = &omap4_vdd_mpu_vfsm_data,
};
......@@ -52,7 +51,6 @@ static struct omap_vdd_info omap4_vdd_iva_info = {
.prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST,
.prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
.vp_data = &omap4_vp_iva_data,
.vc_data = &omap4_vc_iva_data,
.vfsm = &omap4_vdd_iva_vfsm_data,
};
......@@ -64,25 +62,27 @@ static struct omap_vdd_info omap4_vdd_core_info = {
.prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST,
.prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
.vp_data = &omap4_vp_core_data,
.vc_data = &omap4_vc_core_data,
.vfsm = &omap4_vdd_core_vfsm_data,
};
static struct voltagedomain omap4_voltdm_mpu = {
.name = "mpu",
.scalable = true,
.vc = &omap4_vc_mpu,
.vdd = &omap4_vdd_mpu_info,
};
static struct voltagedomain omap4_voltdm_iva = {
.name = "iva",
.scalable = true,
.vc = &omap4_vc_iva,
.vdd = &omap4_vdd_iva_info,
};
static struct voltagedomain omap4_voltdm_core = {
.name = "core",
.scalable = true,
.vc = &omap4_vc_core,
.vdd = &omap4_vdd_core_info,
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册