diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 48b350116cbaef7573ad7810a160ae0855076a6d..a6c6decd05465a51daa04c027ba87f5a4065889e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2560,6 +2560,9 @@ intel_info(const struct drm_i915_private *dev_priv)
 	 IS_SKL_GT3(dev_priv) || IS_SKL_GT4(dev_priv))
 
 #define HAS_GMBUS_IRQ(dev_priv) (INTEL_GEN(dev_priv) >= 4)
+#define HAS_GMBUS_BURST_READ(dev_priv) (INTEL_GEN(dev_priv) >= 10 || \
+					IS_GEMINILAKE(dev_priv) || \
+					IS_KABYLAKE(dev_priv))
 
 /* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
  * rows, which changed the alignment requirements and fence programming.
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2da870a8948e7bc72150b052e265efb480f13725..1f222af0324dae43d39601552827fc2e9268dba4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3123,6 +3123,7 @@ enum i915_power_well_id {
 #define   GMBUS_RATE_400KHZ	(2 << 8) /* reserved on Pineview */
 #define   GMBUS_RATE_1MHZ	(3 << 8) /* reserved on Pineview */
 #define   GMBUS_HOLD_EXT	(1 << 7) /* 300ns hold time, rsvd on Pineview */
+#define   GMBUS_BYTE_CNT_OVERRIDE (1 << 6)
 #define   GMBUS_PIN_DISABLED	0
 #define   GMBUS_PIN_SSC		1
 #define   GMBUS_PIN_VGADDC	2
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 82bb9c33ab1cfdf0c9f560f677fc7380ca10f3d9..bef32b7c248e0bdbe42eec64f36e0e3c64e5e5a7 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -371,12 +371,29 @@ unsigned int gmbus_max_xfer_size(struct drm_i915_private *dev_priv)
 static int
 gmbus_xfer_read_chunk(struct drm_i915_private *dev_priv,
 		      unsigned short addr, u8 *buf, unsigned int len,
-		      u32 gmbus1_index)
+		      u32 gmbus0_reg, u32 gmbus1_index)
 {
+	unsigned int size = len;
+	bool burst_read = len > gmbus_max_xfer_size(dev_priv);
+	bool extra_byte_added = false;
+
+	if (burst_read) {
+		/*
+		 * As per HW Spec, for 512Bytes need to read extra Byte and
+		 * Ignore the extra byte read.
+		 */
+		if (len == 512) {
+			extra_byte_added = true;
+			len++;
+		}
+		size = len % 256 + 256;
+		I915_WRITE_FW(GMBUS0, gmbus0_reg | GMBUS_BYTE_CNT_OVERRIDE);
+	}
+
 	I915_WRITE_FW(GMBUS1,
 		      gmbus1_index |
 		      GMBUS_CYCLE_WAIT |
-		      (len << GMBUS_BYTE_COUNT_SHIFT) |
+		      (size << GMBUS_BYTE_COUNT_SHIFT) |
 		      (addr << GMBUS_SLAVE_ADDR_SHIFT) |
 		      GMBUS_SLAVE_READ | GMBUS_SW_RDY);
 	while (len) {
@@ -389,17 +406,34 @@ gmbus_xfer_read_chunk(struct drm_i915_private *dev_priv,
 
 		val = I915_READ_FW(GMBUS3);
 		do {
+			if (extra_byte_added && len == 1)
+				break;
+
 			*buf++ = val & 0xff;
 			val >>= 8;
 		} while (--len && ++loop < 4);
+
+		if (burst_read && len == size - 4)
+			/* Reset the override bit */
+			I915_WRITE_FW(GMBUS0, gmbus0_reg);
 	}
 
 	return 0;
 }
 
+/*
+ * HW spec says that 512Bytes in Burst read need special treatment.
+ * But it doesn't talk about other multiple of 256Bytes. And couldn't locate
+ * an I2C slave, which supports such a lengthy burst read too for experiments.
+ *
+ * So until things get clarified on HW support, to avoid the burst read length
+ * in fold of 256Bytes except 512, max burst read length is fixed at 767Bytes.
+ */
+#define INTEL_GMBUS_BURST_READ_MAX_LEN		767U
+
 static int
 gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
-		u32 gmbus1_index)
+		u32 gmbus0_reg, u32 gmbus1_index)
 {
 	u8 *buf = msg->buf;
 	unsigned int rx_size = msg->len;
@@ -407,10 +441,13 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
 	int ret;
 
 	do {
-		len = min(rx_size, gmbus_max_xfer_size(dev_priv));
+		if (HAS_GMBUS_BURST_READ(dev_priv))
+			len = min(rx_size, INTEL_GMBUS_BURST_READ_MAX_LEN);
+		else
+			len = min(rx_size, gmbus_max_xfer_size(dev_priv));
 
-		ret = gmbus_xfer_read_chunk(dev_priv, msg->addr,
-					    buf, len, gmbus1_index);
+		ret = gmbus_xfer_read_chunk(dev_priv, msg->addr, buf, len,
+					    gmbus0_reg, gmbus1_index);
 		if (ret)
 			return ret;
 
@@ -498,7 +535,8 @@ gmbus_is_index_xfer(struct i2c_msg *msgs, int i, int num)
 }
 
 static int
-gmbus_index_xfer(struct drm_i915_private *dev_priv, struct i2c_msg *msgs)
+gmbus_index_xfer(struct drm_i915_private *dev_priv, struct i2c_msg *msgs,
+		 u32 gmbus0_reg)
 {
 	u32 gmbus1_index = 0;
 	u32 gmbus5 = 0;
@@ -516,7 +554,8 @@ gmbus_index_xfer(struct drm_i915_private *dev_priv, struct i2c_msg *msgs)
 		I915_WRITE_FW(GMBUS5, gmbus5);
 
 	if (msgs[1].flags & I2C_M_RD)
-		ret = gmbus_xfer_read(dev_priv, &msgs[1], gmbus1_index);
+		ret = gmbus_xfer_read(dev_priv, &msgs[1], gmbus0_reg,
+				      gmbus1_index);
 	else
 		ret = gmbus_xfer_write(dev_priv, &msgs[1], gmbus1_index);
 
@@ -551,10 +590,12 @@ do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num,
 	for (; i < num; i += inc) {
 		inc = 1;
 		if (gmbus_is_index_xfer(msgs, i, num)) {
-			ret = gmbus_index_xfer(dev_priv, &msgs[i]);
+			ret = gmbus_index_xfer(dev_priv, &msgs[i],
+					       gmbus0_source | bus->reg0);
 			inc = 2; /* an index transmission is two msgs */
 		} else if (msgs[i].flags & I2C_M_RD) {
-			ret = gmbus_xfer_read(dev_priv, &msgs[i], 0);
+			ret = gmbus_xfer_read(dev_priv, &msgs[i],
+					      gmbus0_source | bus->reg0, 0);
 		} else {
 			ret = gmbus_xfer_write(dev_priv, &msgs[i], 0);
 		}