diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c index 59c3c0fdbecde30f14188cac0a5f6eab95f2ec9a..59ae76bace14cb740483484b1a6a21b08157f259 100644 --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c @@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chipcommon *cc) { if (!cc->dev) return; /* We don't have a ChipCommon */ + if (cc->dev->id.revision >= 11) + cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); ssb_pmu_init(cc); chipco_powercontrol_init(cc); ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c index 9e50896233aa969e5fa145bcf630dd0ba9055363..a4b2b99f2c802d3d0e57ec92ee8f1d2731ae9b6b 100644 --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c @@ -620,6 +620,11 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus, int err = -ENOMEM; u16 *buf; + if (!ssb_is_sprom_available(bus)) { + ssb_printk(KERN_ERR PFX "No SPROM available!\n"); + return -ENODEV; + } + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) goto out; diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c index d0e6762fec50c6316193eae92a1b787320cbb276..83bc088b941d25e454ec02a8feaa45e55b570502 100644 --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c @@ -175,3 +175,17 @@ const struct ssb_sprom *ssb_get_fallback_sprom(void) { return fallback_sprom; } + +/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ +bool ssb_is_sprom_available(struct ssb_bus *bus) +{ + /* status register only exists on chipcomon rev >= 11 and we need check + for >= 31 only */ + /* this routine differs from specs as we do not access SPROM directly + on PCMCIA */ + if (bus->bustype == SSB_BUSTYPE_PCI && + bus->chipco.dev->id.revision >= 31) + return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; + + return true; +} diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 24f9885473610d66c01d0a8e0bc8d056bca3ba12..3b4da233e31d474122d95143f31f3f7765f96d7b 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -394,6 +394,9 @@ extern int ssb_bus_sdiobus_register(struct ssb_bus *bus, extern void ssb_bus_unregister(struct ssb_bus *bus); +/* Does the device have an SPROM? */ +extern bool ssb_is_sprom_available(struct ssb_bus *bus); + /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h index 4e27acf0a92f91f3f3052f96dcdfa4d142ca369e..2cdf249b4e5f0627980e4140bf96170cb8546ad0 100644 --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -53,6 +53,7 @@ #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ +#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */ #define SSB_CHIPCO_CORECTL 0x0008 #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ @@ -385,6 +386,7 @@ /** Chip specific Chip-Status register contents. */ +#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */ #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ @@ -398,6 +400,18 @@ #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ +/** Macros to determine SPROM presence based on Chip-Status register. */ +#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \ + ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ + SSB_CHIPCO_CHST_4325_OTP_SEL) +#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \ + (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS) +#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \ + (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ + SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \ + ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ + SSB_CHIPCO_CHST_4325_OTP_SEL)) + /** Clockcontrol masks and values **/ @@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu { struct ssb_chipcommon { struct ssb_device *dev; u32 capabilities; + u32 status; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; struct ssb_chipcommon_pmu pmu;