提交 d3a126fc 编写于 作者: S Steven A. Falco 提交者: Linus Torvalds

rtc: rtc-m41t80.c: add support for the ST M41T65 RTC

Add support for M41T65 Real Time Clock chip.

The main differences I see between the M41T65 and M41T80 are that:

1) The M41T65 watchdog timer has three bits controlling resolution
   (versus two for the M41T80).

2) There is no register 0x13 for controlling square-wave output.
Signed-off-by: NSteven A. Falco <sfalco@harris.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 03274572
...@@ -220,22 +220,22 @@ config RTC_DRV_PCF8583 ...@@ -220,22 +220,22 @@ config RTC_DRV_PCF8583
will be called rtc-pcf8583. will be called rtc-pcf8583.
config RTC_DRV_M41T80 config RTC_DRV_M41T80
tristate "ST M41T80/81/82/83/84/85/87" tristate "ST M41T65/M41T80/81/82/83/84/85/87"
help help
If you say Y here you will get support for the If you say Y here you will get support for the ST M41T60
ST M41T80 RTC chips series. Currently following chips are and M41T80 RTC chips series. Currently, the following chips are
supported: M41T80, M41T81, M41T82, M41T83, M41ST84, M41ST85 supported: M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
and M41ST87. M41ST85, and M41ST87.
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
will be called rtc-m41t80. will be called rtc-m41t80.
config RTC_DRV_M41T80_WDT config RTC_DRV_M41T80_WDT
bool "ST M41T80 series RTC watchdog timer" bool "ST M41T65/M41T80 series RTC watchdog timer"
depends on RTC_DRV_M41T80 depends on RTC_DRV_M41T80
help help
If you say Y here you will get support for the If you say Y here you will get support for the
watchdog timer in ST M41T80 RTC chips series. watchdog timer in the ST M41T60 and M41T80 RTC chips series.
config RTC_DRV_TWL92330 config RTC_DRV_TWL92330
boolean "TI TWL92330/Menelaus" boolean "TI TWL92330/Menelaus"
......
...@@ -56,21 +56,27 @@ ...@@ -56,21 +56,27 @@
#define M41T80_ALHOUR_HT (1 << 6) /* HT: Halt Update Bit */ #define M41T80_ALHOUR_HT (1 << 6) /* HT: Halt Update Bit */
#define M41T80_FLAGS_AF (1 << 6) /* AF: Alarm Flag Bit */ #define M41T80_FLAGS_AF (1 << 6) /* AF: Alarm Flag Bit */
#define M41T80_FLAGS_BATT_LOW (1 << 4) /* BL: Battery Low Bit */ #define M41T80_FLAGS_BATT_LOW (1 << 4) /* BL: Battery Low Bit */
#define M41T80_WATCHDOG_RB2 (1 << 7) /* RB: Watchdog resolution */
#define M41T80_WATCHDOG_RB1 (1 << 1) /* RB: Watchdog resolution */
#define M41T80_WATCHDOG_RB0 (1 << 0) /* RB: Watchdog resolution */
#define M41T80_FEATURE_HT (1 << 0) #define M41T80_FEATURE_HT (1 << 0) /* Halt feature */
#define M41T80_FEATURE_BL (1 << 1) #define M41T80_FEATURE_BL (1 << 1) /* Battery low indicator */
#define M41T80_FEATURE_SQ (1 << 2) /* Squarewave feature */
#define M41T80_FEATURE_WD (1 << 3) /* Extra watchdog resolution */
#define DRV_VERSION "0.05" #define DRV_VERSION "0.05"
static const struct i2c_device_id m41t80_id[] = { static const struct i2c_device_id m41t80_id[] = {
{ "m41t80", 0 }, { "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD },
{ "m41t81", M41T80_FEATURE_HT }, { "m41t80", M41T80_FEATURE_SQ },
{ "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL }, { "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ},
{ "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL }, { "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
{ "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL }, { "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
{ "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL }, { "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
{ "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL }, { "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
{ "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL }, { "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
{ "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
{ } { }
}; };
MODULE_DEVICE_TABLE(i2c, m41t80_id); MODULE_DEVICE_TABLE(i2c, m41t80_id);
...@@ -386,8 +392,12 @@ static ssize_t m41t80_sysfs_show_sqwfreq(struct device *dev, ...@@ -386,8 +392,12 @@ static ssize_t m41t80_sysfs_show_sqwfreq(struct device *dev,
struct device_attribute *attr, char *buf) struct device_attribute *attr, char *buf)
{ {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
struct m41t80_data *clientdata = i2c_get_clientdata(client);
int val; int val;
if (!(clientdata->features & M41T80_FEATURE_SQ))
return -EINVAL;
val = i2c_smbus_read_byte_data(client, M41T80_REG_SQW); val = i2c_smbus_read_byte_data(client, M41T80_REG_SQW);
if (val < 0) if (val < 0)
return -EIO; return -EIO;
...@@ -408,9 +418,13 @@ static ssize_t m41t80_sysfs_set_sqwfreq(struct device *dev, ...@@ -408,9 +418,13 @@ static ssize_t m41t80_sysfs_set_sqwfreq(struct device *dev,
const char *buf, size_t count) const char *buf, size_t count)
{ {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
struct m41t80_data *clientdata = i2c_get_clientdata(client);
int almon, sqw; int almon, sqw;
int val = simple_strtoul(buf, NULL, 0); int val = simple_strtoul(buf, NULL, 0);
if (!(clientdata->features & M41T80_FEATURE_SQ))
return -EINVAL;
if (val) { if (val) {
if (!is_power_of_2(val)) if (!is_power_of_2(val))
return -EINVAL; return -EINVAL;
...@@ -499,6 +513,8 @@ static void wdt_ping(void) ...@@ -499,6 +513,8 @@ static void wdt_ping(void)
.buf = i2c_data, .buf = i2c_data,
}, },
}; };
struct m41t80_data *clientdata = i2c_get_clientdata(save_client);
i2c_data[0] = 0x09; /* watchdog register */ i2c_data[0] = 0x09; /* watchdog register */
if (wdt_margin > 31) if (wdt_margin > 31)
...@@ -509,6 +525,13 @@ static void wdt_ping(void) ...@@ -509,6 +525,13 @@ static void wdt_ping(void)
*/ */
i2c_data[1] = wdt_margin<<2 | 0x82; i2c_data[1] = wdt_margin<<2 | 0x82;
/*
* M41T65 has three bits for watchdog resolution. Don't set bit 7, as
* that would be an invalid resolution.
*/
if (clientdata->features & M41T80_FEATURE_WD)
i2c_data[1] &= ~M41T80_WATCHDOG_RB2;
i2c_transfer(save_client->adapter, msgs1, 1); i2c_transfer(save_client->adapter, msgs1, 1);
} }
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册