提交 d2ec3aba 编写于 作者: S Sangbeom Kim 提交者: Mark Brown

ASoC: SAMSUNG: Add WM8994 PCM Machine driver

This patch add WM8994 PCM machine driver to support PCM audio
on SMDKV310, SMDKC210 boards.
Playback and Capture supports 8kHz sampling rates.
and It is tested on SMDKV310, SMDKC210.
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Acked-by: NJassi Brar <jaswinder.singh@linaro.org>
Acked-by: NLiam Girdwood <lrg@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 1ae4e9b9
...@@ -171,6 +171,14 @@ config SND_SOC_SMDK_WM8580_PCM ...@@ -171,6 +171,14 @@ config SND_SOC_SMDK_WM8580_PCM
help help
Say Y if you want to add support for SoC audio on the SMDK. Say Y if you want to add support for SoC audio on the SMDK.
config SND_SOC_SMDK_WM8994_PCM
tristate "SoC PCM Audio support for WM8994 on SMDK"
depends on SND_SOC_SAMSUNG && (MACH_SMDKC210 || MACH_SMDKV310)
select SND_SOC_WM8994
select SND_SAMSUNG_PCM
help
Say Y if you want to add support for SoC audio on the SMDK
config SND_SOC_SPEYSIDE config SND_SOC_SPEYSIDE
tristate "Audio support for Wolfson Speyside" tristate "Audio support for Wolfson Speyside"
depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410
......
...@@ -35,6 +35,7 @@ snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o ...@@ -35,6 +35,7 @@ snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o
snd-soc-goni-wm8994-objs := goni_wm8994.o snd-soc-goni-wm8994-objs := goni_wm8994.o
snd-soc-smdk-spdif-objs := smdk_spdif.o snd-soc-smdk-spdif-objs := smdk_spdif.o
snd-soc-smdk-wm8580pcm-objs := smdk_wm8580pcm.o snd-soc-smdk-wm8580pcm-objs := smdk_wm8580pcm.o
snd-soc-smdk-wm8994pcm-objs := smdk_wm8994pcm.o
snd-soc-speyside-objs := speyside.o snd-soc-speyside-objs := speyside.o
snd-soc-speyside-wm8962-objs := speyside_wm8962.o snd-soc-speyside-wm8962-objs := speyside_wm8962.o
...@@ -55,5 +56,6 @@ obj-$(CONFIG_SND_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o ...@@ -55,5 +56,6 @@ obj-$(CONFIG_SND_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o
obj-$(CONFIG_SND_SOC_GONI_AQUILA_WM8994) += snd-soc-goni-wm8994.o obj-$(CONFIG_SND_SOC_GONI_AQUILA_WM8994) += snd-soc-goni-wm8994.o
obj-$(CONFIG_SND_SOC_SMDK_WM8580_PCM) += snd-soc-smdk-wm8580pcm.o obj-$(CONFIG_SND_SOC_SMDK_WM8580_PCM) += snd-soc-smdk-wm8580pcm.o
obj-$(CONFIG_SND_SOC_SMDK_WM8994_PCM) += snd-soc-smdk-wm8994pcm.o
obj-$(CONFIG_SND_SOC_SPEYSIDE) += snd-soc-speyside.o obj-$(CONFIG_SND_SOC_SPEYSIDE) += snd-soc-speyside.o
obj-$(CONFIG_SND_SOC_SPEYSIDE_WM8962) += snd-soc-speyside-wm8962.o obj-$(CONFIG_SND_SOC_SPEYSIDE_WM8962) += snd-soc-speyside-wm8962.o
/*
* sound/soc/samsung/smdk_wm8994pcm.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <sound/soc.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include "../codecs/wm8994.h"
#include "dma.h"
#include "pcm.h"
/*
* Board Settings:
* o '1' means 'ON'
* o '0' means 'OFF'
* o 'X' means 'Don't care'
*
* SMDKC210, SMDKV310: CFG3- 1001, CFG5-1000, CFG7-111111
*/
/*
* Configure audio route as :-
* $ amixer sset 'DAC1' on,on
* $ amixer sset 'Right Headphone Mux' 'DAC'
* $ amixer sset 'Left Headphone Mux' 'DAC'
* $ amixer sset 'DAC1R Mixer AIF1.1' on
* $ amixer sset 'DAC1L Mixer AIF1.1' on
* $ amixer sset 'IN2L' on
* $ amixer sset 'IN2L PGA IN2LN' on
* $ amixer sset 'MIXINL IN2L' on
* $ amixer sset 'AIF1ADC1L Mixer ADC/DMIC' on
* $ amixer sset 'IN2R' on
* $ amixer sset 'IN2R PGA IN2RN' on
* $ amixer sset 'MIXINR IN2R' on
* $ amixer sset 'AIF1ADC1R Mixer ADC/DMIC' on
*/
/* SMDK has a 16.9344MHZ crystal attached to WM8994 */
#define SMDK_WM8994_FREQ 16934400
static int smdk_wm8994_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
unsigned long mclk_freq;
int rfs, ret;
switch(params_rate(params)) {
case 8000:
rfs = 512;
break;
default:
dev_err(cpu_dai->dev, "%s:%d Sampling Rate %u not supported!\n",
__func__, __LINE__, params_rate(params));
return -EINVAL;
}
mclk_freq = params_rate(params) * rfs;
/* Set the codec DAI configuration */
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B
| SND_SOC_DAIFMT_IB_NF
| SND_SOC_DAIFMT_CBS_CFS);
if (ret < 0)
return ret;
/* Set the cpu DAI configuration */
ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B
| SND_SOC_DAIFMT_IB_NF
| SND_SOC_DAIFMT_CBS_CFS);
if (ret < 0)
return ret;
ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1,
mclk_freq, SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, WM8994_FLL_SRC_MCLK1,
SMDK_WM8994_FREQ, mclk_freq);
if (ret < 0)
return ret;
/* Set PCM source clock on CPU */
ret = snd_soc_dai_set_sysclk(cpu_dai, S3C_PCM_CLKSRC_MUX,
mclk_freq, SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
/* Set SCLK_DIV for making bclk */
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_PCM_SCLK_PER_FS, rfs);
if (ret < 0)
return ret;
return 0;
}
static struct snd_soc_ops smdk_wm8994_pcm_ops = {
.hw_params = smdk_wm8994_pcm_hw_params,
};
static struct snd_soc_dai_link smdk_dai[] = {
{
.name = "WM8994 PAIF PCM",
.stream_name = "Primary PCM",
.cpu_dai_name = "samsung-pcm.0",
.codec_dai_name = "wm8994-aif1",
.platform_name = "samsung-audio",
.codec_name = "wm8994-codec",
.ops = &smdk_wm8994_pcm_ops,
},
};
static struct snd_soc_card smdk_pcm = {
.name = "SMDK-PCM",
.dai_link = smdk_dai,
.num_links = 1,
};
static int __devinit snd_smdk_probe(struct platform_device *pdev)
{
int ret = 0;
smdk_pcm.dev = &pdev->dev;
ret = snd_soc_register_card(&smdk_pcm);
if (ret) {
dev_err(&pdev->dev, "snd_soc_register_card failed %d\n", ret);
return ret;
}
return 0;
}
static int __devexit snd_smdk_remove(struct platform_device *pdev)
{
snd_soc_unregister_card(&smdk_pcm);
platform_set_drvdata(pdev, NULL);
return 0;
}
static struct platform_driver snd_smdk_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "samsung-smdk-pcm",
},
.probe = snd_smdk_probe,
.remove = __devexit_p(snd_smdk_remove),
};
static int __init smdk_audio_init(void)
{
return platform_driver_register(&snd_smdk_driver);
}
module_init(smdk_audio_init);
static void __exit smdk_audio_exit(void)
{
platform_driver_unregister(&snd_smdk_driver);
}
module_exit(smdk_audio_exit);
MODULE_AUTHOR("Sangbeom Kim, <sbkim73@samsung.com>");
MODULE_DESCRIPTION("ALSA SoC SMDK WM8994 for PCM");
MODULE_LICENSE("GPL");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册