Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits)
  hwmon: (lm75) Add support for the Texas Instruments TMP105
  hwmon: (ltc4245) Read only one GPIO pin
  hwmon: (dme1737) Add SCH5127 support
  hwmon: (tmp102) Don't always stop chip at exit
  hwmon: (tmp102) Fix suspend and resume functions
  hwmon: (tmp102) Various fixes
  hwmon: Driver for TI TMP102 temperature sensor
  hwmon: EMC1403 thermal sensor support
  hwmon: (applesmc) Add temperature sensor labels to sysfs interface
  hwmon: (applesmc) Add generic support for MacBook Pro 7
  hwmon: (applesmc) Add generic support for MacBook Pro 6
  hwmon: (applesmc) Add support for MacBook Pro 5,3 and 5,4
  hwmon: (tmp401) Reorganize code to get rid of static forward declarations
  hwmon: (tmp401) Use constants for sysfs file permissions
  hwmon: (adm1031) Allow setting update rate
  hwmon: Add description of the update_rate sysfs attribute
  hwmon: (lm90) Use programmed update rate
  hwmon: (f71882fg) Acquire I/O regions while we're working with them
  hwmon: (f71882fg) Code cleanup
  hwmon: (f71882fg) Use strict_stro(l|ul) instead of simple_strto$1
  ...

Documentation/hwmon/dme1737

@@ -9,11 +9,15 @@ Supported chips:
   * SMSC SCH3112, SCH3114, SCH3116
     Prefix: 'sch311x'
     Addresses scanned: none, address read from Super-I/O config space
-    Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf
+    Datasheet: Available on the Internet
   * SMSC SCH5027
     Prefix: 'sch5027'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
     Datasheet: Provided by SMSC upon request and under NDA
+  * SMSC SCH5127
+    Prefix: 'sch5127'
+    Addresses scanned: none, address read from Super-I/O config space
+    Datasheet: Provided by SMSC upon request and under NDA
 
 Authors:
     Juerg Haefliger <juergh@gmail.com>
@@ -36,8 +40,8 @@ Description
 -----------
 
 This driver implements support for the hardware monitoring capabilities of the
-SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, and SMSC
-SCH311x Super-I/O chips. These chips feature monitoring of 3 temp sensors
+SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x,
+and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
 temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and
 1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
 up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
@@ -48,14 +52,14 @@ Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on
 the configuration of the chip. The driver will detect which features are
 present during initialization and create the sysfs attributes accordingly.
 
-For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and
-pwm[5-6] don't exist.
+For the SCH311x and SCH5127, fan[1-3] and pwm[1-3] are always present and
+fan[4-6] and pwm[5-6] don't exist.
 
 The hardware monitoring features of the DME1737, A8000, and SCH5027 are only
-accessible via SMBus, while the SCH311x only provides access via the ISA bus.
-The driver will therefore register itself as an I2C client driver if it detects
-a DME1737, A8000, or SCH5027 and as a platform driver if it detects a SCH311x
-chip.
+accessible via SMBus, while the SCH311x and SCH5127 only provide access via
+the ISA bus. The driver will therefore register itself as an I2C client driver
+if it detects a DME1737, A8000, or SCH5027 and as a platform driver if it
+detects a SCH311x or SCH5127 chip.
 
 
 Voltage Monitoring
@@ -76,7 +80,7 @@ DME1737, A8000:
 	in6: Vbat	(+3.0V)			0V - 4.38V
 
 SCH311x:
-	in0: +2.5V				0V - 6.64V
+	in0: +2.5V				0V - 3.32V
 	in1: Vccp	(processor core)	0V - 2V
 	in2: VCC	(internal +3.3V)	0V - 4.38V
 	in3: +5V				0V - 6.64V
@@ -93,6 +97,15 @@ SCH5027:
 	in5: VTR	(+3.3V standby)		0V - 4.38V
 	in6: Vbat	(+3.0V)			0V - 4.38V
 
+SCH5127:
+	in0: +2.5				0V - 3.32V
+	in1: Vccp	(processor core)	0V - 3V
+	in2: VCC	(internal +3.3V)	0V - 4.38V
+	in3: V2_IN				0V - 1.5V
+	in4: V1_IN				0V - 1.5V
+	in5: VTR	(+3.3V standby)		0V - 4.38V
+	in6: Vbat	(+3.0V)			0V - 4.38V
+
 Each voltage input has associated min and max limits which trigger an alarm
 when crossed.
 
@@ -293,3 +306,21 @@ pwm[1-3]_auto_point1_pwm	RW	Auto PWM pwm point. Auto_point1 is the
 pwm[1-3]_auto_point2_pwm	RO	Auto PWM pwm point. Auto_point2 is the
 					full-speed duty-cycle which is hard-
 					wired to 255 (100% duty-cycle).
+
+Chip Differences
+----------------
+
+Feature			dme1737	sch311x	sch5027	sch5127
+-------------------------------------------------------
+temp[1-3]_offset	yes	yes
+vid			yes
+zone3			yes	yes	yes
+zone[1-3]_hyst		yes	yes
+pwm min/off		yes	yes
+fan3			opt	yes	opt	yes
+pwm3			opt	yes	opt	yes
+fan4			opt		opt
+fan5			opt		opt
+pwm5			opt		opt
+fan6			opt		opt
+pwm6			opt		opt

Documentation/hwmon/lm63

@@ -7,6 +7,11 @@ Supported chips:
     Addresses scanned: I2C 0x4c
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/pf/LM/LM63.html
+  * National Semiconductor LM64
+    Prefix: 'lm64'
+    Addresses scanned: I2C 0x18 and 0x4e
+    Datasheet: Publicly available at the National Semiconductor website
+               http://www.national.com/pf/LM/LM64.html
 
 Author: Jean Delvare <khali@linux-fr.org>
 
@@ -55,3 +60,5 @@ The lm63 driver will not update its values more frequently than every
 second; reading them more often will do no harm, but will return 'old'
 values.
 
+The LM64 is effectively an LM63 with GPIO lines. The driver does not
+support these GPIO lines at present.

Documentation/hwmon/ltc4245

@@ -72,9 +72,7 @@ in6_min_alarm		5v  output undervoltage alarm
 in7_min_alarm		3v  output undervoltage alarm
 in8_min_alarm		Vee (-12v) output undervoltage alarm
 
-in9_input		GPIO #1 voltage data
-in10_input		GPIO #2 voltage data
-in11_input		GPIO #3 voltage data
+in9_input		GPIO voltage data
 
 power1_input		12v power usage (mW)
 power2_input		5v  power usage (mW)

Documentation/hwmon/sysfs-interface

@@ -80,9 +80,9 @@ All entries (except name) are optional, and should only be created in a
 given driver if the chip has the feature.
 
 
-********
-* Name *
-********
+*********************
+* Global attributes *
+*********************
 
 name		The chip name.
 		This should be a short, lowercase string, not containing
@@ -91,6 +91,13 @@ name		The chip name.
 		I2C devices get this attribute created automatically.
 		RO
 
+update_rate	The rate at which the chip will update readings.
+		Unit: millisecond
+		RW
+		Some devices have a variable update rate. This attribute
+		can be used to change the update rate to the desired
+		frequency.
+
 
 ************
 * Voltages *

Documentation/hwmon/tmp102

+Kernel driver tmp102
+====================
+
+Supported chips:
+  * Texas Instruments TMP102
+    Prefix: 'tmp102'
+    Addresses scanned: none
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp102.html
+
+Author:
+	Steven King <sfking@fdwdc.com>
+
+Description
+-----------
+
+The Texas Instruments TMP102 implements one temperature sensor.  Limits can be
+set through the Overtemperature Shutdown register and Hysteresis register.  The
+sensor is accurate to 0.5 degree over the range of -25 to +85 C, and to 1.0
+degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree.  The
+operating temperature has a minimum of -55 C and a maximum of +150 C.
+
+The TMP102 has a programmable update rate that can select between 8, 4, 1, and
+0.5 Hz. (Currently the driver only supports the default of 4 Hz).
+
+The driver provides the common sysfs-interface for temperatures (see
+Documentation/hwmon/sysfs-interface under Temperatures).

drivers/acpi/osl.c

@@ -1206,6 +1206,15 @@ int acpi_check_mem_region(resource_size_t start, resource_size_t n,
 }
 EXPORT_SYMBOL(acpi_check_mem_region);
 
+/*
+ * Let drivers know whether the resource checks are effective
+ */
+int acpi_resources_are_enforced(void)
+{
+	return acpi_enforce_resources == ENFORCE_RESOURCES_STRICT;
+}
+EXPORT_SYMBOL(acpi_resources_are_enforced);
+
 /*
  * Acquire a spinlock.
  *

drivers/hwmon/Kconfig

@@ -447,13 +447,14 @@ config SENSORS_IT87
 	  will be called it87.
 
 config SENSORS_LM63
-	tristate "National Semiconductor LM63"
+	tristate "National Semiconductor LM63 and LM64"
 	depends on I2C
 	help
-	  If you say yes here you get support for the National Semiconductor
-	  LM63 remote diode digital temperature sensor with integrated fan
-	  control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
-	  motherboard, among others.
+	  If you say yes here you get support for the National
+	  Semiconductor LM63 and LM64 remote diode digital temperature
+	  sensors with integrated fan control.  Such chips are found
+	  on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
+	  others.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm63.
@@ -492,7 +493,8 @@ config SENSORS_LM75
 		- NXP's LM75A
 		- ST Microelectronics STDS75
 		- TelCom (now Microchip) TCN75
-		- Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
+		- Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
+		  TMP275
 
 	  This driver supports driver model based binding through board
 	  specific I2C device tables.
@@ -749,6 +751,16 @@ config SENSORS_DME1737
 	  This driver can also be built as a module.  If so, the module
 	  will be called dme1737.
 
+config SENSORS_EMC1403
+	tristate "SMSC EMC1403 thermal sensor"
+	depends on I2C
+	help
+	  If you say yes here you get support for the SMSC EMC1403
+	  temperature monitoring chip.
+
+	  Threshold values can be configured using sysfs.
+	  Data from the different diodes are accessible via sysfs.
+
 config SENSORS_SMSC47M1
 	tristate "SMSC LPC47M10x and compatibles"
 	help
@@ -831,6 +843,16 @@ config SENSORS_THMC50
 	  This driver can also be built as a module.  If so, the module
 	  will be called thmc50.
 
+config SENSORS_TMP102
+	tristate "Texas Instruments TMP102"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for Texas Instruments TMP102
+	  sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tmp102.
+
 config SENSORS_TMP401
 	tristate "Texas Instruments TMP401 and compatibles"
 	depends on I2C && EXPERIMENTAL

drivers/hwmon/Makefile

@@ -41,6 +41,7 @@ obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_DME1737)	+= dme1737.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
+obj-$(CONFIG_SENSORS_EMC1403)	+= emc1403.o
 obj-$(CONFIG_SENSORS_F71805F)	+= f71805f.o
 obj-$(CONFIG_SENSORS_F71882FG)	+= f71882fg.o
 obj-$(CONFIG_SENSORS_F75375S)	+= f75375s.o
@@ -90,6 +91,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
 obj-$(CONFIG_SENSORS_AMC6821)	+= amc6821.o
 obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
+obj-$(CONFIG_SENSORS_TMP102)	+= tmp102.o
 obj-$(CONFIG_SENSORS_TMP401)	+= tmp401.o
 obj-$(CONFIG_SENSORS_TMP421)	+= tmp421.o
 obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o

drivers/hwmon/adm1031.c

@@ -36,6 +36,7 @@
 #define ADM1031_REG_FAN_DIV(nr)		(0x20 + (nr))
 #define ADM1031_REG_PWM			(0x22)
 #define ADM1031_REG_FAN_MIN(nr)		(0x10 + (nr))
+#define ADM1031_REG_FAN_FILTER		(0x23)
 
 #define ADM1031_REG_TEMP_OFFSET(nr)	(0x0d + (nr))
 #define ADM1031_REG_TEMP_MAX(nr)	(0x14 + 4 * (nr))
@@ -61,6 +62,9 @@
 #define ADM1031_CONF2_TACH2_ENABLE	0x08
 #define ADM1031_CONF2_TEMP_ENABLE(chan)	(0x10 << (chan))
 
+#define ADM1031_UPDATE_RATE_MASK	0x1c
+#define ADM1031_UPDATE_RATE_SHIFT	2
+
 /* Addresses to scan */
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
@@ -75,6 +79,7 @@ struct adm1031_data {
 	int chip_type;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
+	unsigned int update_rate;	/* In milliseconds */
 	/* The chan_select_table contains the possible configurations for
 	 * auto fan control.
 	 */
@@ -738,6 +743,57 @@ static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 12);
 static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 13);
 static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14);
 
+/* Update Rate */
+static const unsigned int update_rates[] = {
+	16000, 8000, 4000, 2000, 1000, 500, 250, 125,
+};
+
+static ssize_t show_update_rate(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+
+	return sprintf(buf, "%u\n", data->update_rate);
+}
+
+static ssize_t set_update_rate(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+	int i, err;
+	u8 reg;
+
+	err = strict_strtoul(buf, 10, &val);
+	if (err)
+		return err;
+
+	/* find the nearest update rate from the table */
+	for (i = 0; i < ARRAY_SIZE(update_rates) - 1; i++) {
+		if (val >= update_rates[i])
+			break;
+	}
+	/* if not found, we point to the last entry (lowest update rate) */
+
+	/* set the new update rate while preserving other settings */
+	reg = adm1031_read_value(client, ADM1031_REG_FAN_FILTER);
+	reg &= ~ADM1031_UPDATE_RATE_MASK;
+	reg |= i << ADM1031_UPDATE_RATE_SHIFT;
+	adm1031_write_value(client, ADM1031_REG_FAN_FILTER, reg);
+
+	mutex_lock(&data->update_lock);
+	data->update_rate = update_rates[i];
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static DEVICE_ATTR(update_rate, S_IRUGO | S_IWUSR, show_update_rate,
+		   set_update_rate);
+
 static struct attribute *adm1031_attributes[] = {
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_fan1_div.dev_attr.attr,
@@ -774,6 +830,7 @@ static struct attribute *adm1031_attributes[] = {
 
 	&sensor_dev_attr_auto_fan1_min_pwm.dev_attr.attr,
 
+	&dev_attr_update_rate.attr,
 	&dev_attr_alarms.attr,
 
 	NULL
@@ -900,6 +957,7 @@ static void adm1031_init_client(struct i2c_client *client)
 {
 	unsigned int read_val;
 	unsigned int mask;
+	int i;
 	struct adm1031_data *data = i2c_get_clientdata(client);
 
 	mask = (ADM1031_CONF2_PWM1_ENABLE | ADM1031_CONF2_TACH1_ENABLE);
@@ -919,18 +977,24 @@ static void adm1031_init_client(struct i2c_client *client)
 				ADM1031_CONF1_MONITOR_ENABLE);
 	}
 
+	/* Read the chip's update rate */
+	mask = ADM1031_UPDATE_RATE_MASK;
+	read_val = adm1031_read_value(client, ADM1031_REG_FAN_FILTER);
+	i = (read_val & mask) >> ADM1031_UPDATE_RATE_SHIFT;
+	data->update_rate = update_rates[i];
 }
 
 static struct adm1031_data *adm1031_update_device(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adm1031_data *data = i2c_get_clientdata(client);
+	unsigned long next_update;
 	int chan;
 
 	mutex_lock(&data->update_lock);
 
-	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
-	    || !data->valid) {
+	next_update = data->last_updated + msecs_to_jiffies(data->update_rate);
+	if (time_after(jiffies, next_update) || !data->valid) {
 
 		dev_dbg(&client->dev, "Starting adm1031 update\n");
 		for (chan = 0;

drivers/hwmon/applesmc.c

@@ -148,6 +148,20 @@ static const char *temperature_sensors_sets[][41] = {
 /* Set 18: MacBook Pro 2,2 */
 	{ "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "TM0P", "TTF0",
 	  "Th0H", "Th1H", "Tm0P", "Ts0P", NULL },
+/* Set 19: Macbook Pro 5,3 */
+	{ "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0F", "TC0P", "TG0D",
+	  "TG0F", "TG0H", "TG0P", "TG0T", "TN0D", "TN0P", "TTF0", "Th2H",
+	  "Tm0P", "Ts0P", "Ts0S", NULL },
+/* Set 20: MacBook Pro 5,4 */
+	{ "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0F", "TC0P", "TN0D",
+	  "TN0P", "TTF0", "Th2H", "Ts0P", "Ts0S", NULL },
+/* Set 21: MacBook Pro 6,2 */
+	{ "TB0T", "TB1T", "TB2T", "TC0C", "TC0D", "TC0P", "TC1C", "TG0D",
+	  "TG0P", "TG0T", "TMCD", "TP0P", "TPCD", "Th1H", "Th2H", "Tm0P",
+	  "Ts0P", "Ts0S", NULL },
+/* Set 22: MacBook Pro 7,1 */
+	{ "TB0T", "TB1T", "TB2T", "TC0D", "TC0P", "TN0D", "TN0P", "TN0S",
+	  "TN1D", "TN1F", "TN1G", "TN1S", "Th1H", "Ts0P", "Ts0S", NULL },
 };
 
 /* List of keys used to read/write fan speeds */
@@ -646,6 +660,17 @@ static ssize_t applesmc_light_show(struct device *dev,
 		return snprintf(sysfsbuf, PAGE_SIZE, "(%d,%d)\n", left, right);
 }
 
+/* Displays sensor key as label */
+static ssize_t applesmc_show_sensor_label(struct device *dev,
+			struct device_attribute *devattr, char *sysfsbuf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	const char *key =
+		temperature_sensors_sets[applesmc_temperature_set][attr->index];
+
+	return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", key);
+}
+
 /* Displays degree Celsius * 1000 */
 static ssize_t applesmc_show_temperature(struct device *dev,
 			struct device_attribute *devattr, char *sysfsbuf)
@@ -1113,6 +1138,86 @@ static const struct attribute_group fan_attribute_groups[] = {
 /*
  * Temperature sensors sysfs entries.
  */
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp7_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp8_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 7);
+static SENSOR_DEVICE_ATTR(temp9_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 8);
+static SENSOR_DEVICE_ATTR(temp10_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 9);
+static SENSOR_DEVICE_ATTR(temp11_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 10);
+static SENSOR_DEVICE_ATTR(temp12_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 11);
+static SENSOR_DEVICE_ATTR(temp13_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 12);
+static SENSOR_DEVICE_ATTR(temp14_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 13);
+static SENSOR_DEVICE_ATTR(temp15_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 14);
+static SENSOR_DEVICE_ATTR(temp16_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 15);
+static SENSOR_DEVICE_ATTR(temp17_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 16);
+static SENSOR_DEVICE_ATTR(temp18_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 17);
+static SENSOR_DEVICE_ATTR(temp19_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 18);
+static SENSOR_DEVICE_ATTR(temp20_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 19);
+static SENSOR_DEVICE_ATTR(temp21_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 20);
+static SENSOR_DEVICE_ATTR(temp22_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 21);
+static SENSOR_DEVICE_ATTR(temp23_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 22);
+static SENSOR_DEVICE_ATTR(temp24_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 23);
+static SENSOR_DEVICE_ATTR(temp25_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 24);
+static SENSOR_DEVICE_ATTR(temp26_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 25);
+static SENSOR_DEVICE_ATTR(temp27_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 26);
+static SENSOR_DEVICE_ATTR(temp28_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 27);
+static SENSOR_DEVICE_ATTR(temp29_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 28);
+static SENSOR_DEVICE_ATTR(temp30_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 29);
+static SENSOR_DEVICE_ATTR(temp31_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 30);
+static SENSOR_DEVICE_ATTR(temp32_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 31);
+static SENSOR_DEVICE_ATTR(temp33_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 32);
+static SENSOR_DEVICE_ATTR(temp34_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 33);
+static SENSOR_DEVICE_ATTR(temp35_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 34);
+static SENSOR_DEVICE_ATTR(temp36_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 35);
+static SENSOR_DEVICE_ATTR(temp37_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 36);
+static SENSOR_DEVICE_ATTR(temp38_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 37);
+static SENSOR_DEVICE_ATTR(temp39_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 38);
+static SENSOR_DEVICE_ATTR(temp40_label, S_IRUGO,
+					applesmc_show_sensor_label, NULL, 39);
 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
 					applesmc_show_temperature, NULL, 0);
 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO,
@@ -1194,6 +1299,50 @@ static SENSOR_DEVICE_ATTR(temp39_input, S_IRUGO,
 static SENSOR_DEVICE_ATTR(temp40_input, S_IRUGO,
 					applesmc_show_temperature, NULL, 39);
 
+static struct attribute *label_attributes[] = {
+	&sensor_dev_attr_temp1_label.dev_attr.attr,
+	&sensor_dev_attr_temp2_label.dev_attr.attr,
+	&sensor_dev_attr_temp3_label.dev_attr.attr,
+	&sensor_dev_attr_temp4_label.dev_attr.attr,
+	&sensor_dev_attr_temp5_label.dev_attr.attr,
+	&sensor_dev_attr_temp6_label.dev_attr.attr,
+	&sensor_dev_attr_temp7_label.dev_attr.attr,
+	&sensor_dev_attr_temp8_label.dev_attr.attr,
+	&sensor_dev_attr_temp9_label.dev_attr.attr,
+	&sensor_dev_attr_temp10_label.dev_attr.attr,
+	&sensor_dev_attr_temp11_label.dev_attr.attr,
+	&sensor_dev_attr_temp12_label.dev_attr.attr,
+	&sensor_dev_attr_temp13_label.dev_attr.attr,
+	&sensor_dev_attr_temp14_label.dev_attr.attr,
+	&sensor_dev_attr_temp15_label.dev_attr.attr,
+	&sensor_dev_attr_temp16_label.dev_attr.attr,
+	&sensor_dev_attr_temp17_label.dev_attr.attr,
+	&sensor_dev_attr_temp18_label.dev_attr.attr,
+	&sensor_dev_attr_temp19_label.dev_attr.attr,
+	&sensor_dev_attr_temp20_label.dev_attr.attr,
+	&sensor_dev_attr_temp21_label.dev_attr.attr,
+	&sensor_dev_attr_temp22_label.dev_attr.attr,
+	&sensor_dev_attr_temp23_label.dev_attr.attr,
+	&sensor_dev_attr_temp24_label.dev_attr.attr,
+	&sensor_dev_attr_temp25_label.dev_attr.attr,
+	&sensor_dev_attr_temp26_label.dev_attr.attr,
+	&sensor_dev_attr_temp27_label.dev_attr.attr,
+	&sensor_dev_attr_temp28_label.dev_attr.attr,
+	&sensor_dev_attr_temp29_label.dev_attr.attr,
+	&sensor_dev_attr_temp30_label.dev_attr.attr,
+	&sensor_dev_attr_temp31_label.dev_attr.attr,
+	&sensor_dev_attr_temp32_label.dev_attr.attr,
+	&sensor_dev_attr_temp33_label.dev_attr.attr,
+	&sensor_dev_attr_temp34_label.dev_attr.attr,
+	&sensor_dev_attr_temp35_label.dev_attr.attr,
+	&sensor_dev_attr_temp36_label.dev_attr.attr,
+	&sensor_dev_attr_temp37_label.dev_attr.attr,
+	&sensor_dev_attr_temp38_label.dev_attr.attr,
+	&sensor_dev_attr_temp39_label.dev_attr.attr,
+	&sensor_dev_attr_temp40_label.dev_attr.attr,
+	NULL
+};
+
 static struct attribute *temperature_attributes[] = {
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	&sensor_dev_attr_temp2_input.dev_attr.attr,
@@ -1241,6 +1390,10 @@ static struct attribute *temperature_attributes[] = {
 static const struct attribute_group temperature_attributes_group =
 	{ .attrs = temperature_attributes };
 
+static const struct attribute_group label_attributes_group = {
+	.attrs = label_attributes
+};
+
 /* Module stuff */
 
 /*
@@ -1363,6 +1516,14 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
 	{ .accelerometer = 0, .light = 0, .temperature_set = 17 },
 /* MacBook Pro 2,2: accelerometer, backlight and temperature set 18 */
 	{ .accelerometer = 1, .light = 1, .temperature_set = 18 },
+/* MacBook Pro 5,3: accelerometer, backlight and temperature set 19 */
+	{ .accelerometer = 1, .light = 1, .temperature_set = 19 },
+/* MacBook Pro 5,4: accelerometer, backlight and temperature set 20 */
+	{ .accelerometer = 1, .light = 1, .temperature_set = 20 },
+/* MacBook Pro 6,2: accelerometer, backlight and temperature set 21 */
+	{ .accelerometer = 1, .light = 1, .temperature_set = 21 },
+/* MacBook Pro 7,1: accelerometer, backlight and temperature set 22 */
+	{ .accelerometer = 1, .light = 1, .temperature_set = 22 },
 };
 
 /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
@@ -1376,6 +1537,22 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
 	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir") },
 		&applesmc_dmi_data[7]},
+	{ applesmc_dmi_match, "Apple MacBook Pro 7", {
+	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro7") },
+		&applesmc_dmi_data[22]},
+	{ applesmc_dmi_match, "Apple MacBook Pro 5,4", {
+	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,4") },
+		&applesmc_dmi_data[20]},
+	{ applesmc_dmi_match, "Apple MacBook Pro 5,3", {
+	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,3") },
+		&applesmc_dmi_data[19]},
+	{ applesmc_dmi_match, "Apple MacBook Pro 6", {
+	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro6") },
+		&applesmc_dmi_data[21]},
 	{ applesmc_dmi_match, "Apple MacBook Pro 5", {
 	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5") },
@@ -1518,7 +1695,8 @@ static int __init applesmc_init(void)
 	for (i = 0;
 	     temperature_sensors_sets[applesmc_temperature_set][i] != NULL;
 	     i++) {
-		if (temperature_attributes[i] == NULL) {
+		if (temperature_attributes[i] == NULL ||
+		    label_attributes[i] == NULL) {
 			printk(KERN_ERR "applesmc: More temperature sensors "
 				"in temperature_sensors_sets (at least %i)"
 				"than available sysfs files in "
@@ -1530,6 +1708,10 @@ static int __init applesmc_init(void)
 						temperature_attributes[i]);
 		if (ret)
 			goto out_temperature;
+		ret = sysfs_create_file(&pdev->dev.kobj,
+						label_attributes[i]);
+		if (ret)
+			goto out_temperature;
 	}
 
 	if (applesmc_accelerometer) {
@@ -1580,6 +1762,7 @@ static int __init applesmc_init(void)
 	if (applesmc_accelerometer)
 		applesmc_release_accelerometer();
 out_temperature:
+	sysfs_remove_group(&pdev->dev.kobj, &label_attributes_group);
 	sysfs_remove_group(&pdev->dev.kobj, &temperature_attributes_group);
 out_fans:
 	while (fans_handled)
@@ -1609,6 +1792,7 @@ static void __exit applesmc_exit(void)
 	}
 	if (applesmc_accelerometer)
 		applesmc_release_accelerometer();
+	sysfs_remove_group(&pdev->dev.kobj, &label_attributes_group);
 	sysfs_remove_group(&pdev->dev.kobj, &temperature_attributes_group);
 	while (fans_handled)
 		sysfs_remove_group(&pdev->dev.kobj,

drivers/hwmon/asus_atk0110.c

@@ -1411,6 +1411,13 @@ static int __init atk0110_init(void)
 {
 	int ret;
 
+	/* Make sure it's safe to access the device through ACPI */
+	if (!acpi_resources_are_enforced()) {
+		pr_err("atk: Resources not safely usable due to "
+		       "acpi_enforce_resources kernel parameter\n");
+		return -EBUSY;
+	}
+
 	ret = acpi_bus_register_driver(&atk_driver);
 	if (ret)
 		pr_info("atk: acpi_bus_register_driver failed: %d\n", ret);

drivers/hwmon/emc1403.c

+/*
+ * emc1403.c - SMSC Thermal Driver
+ *
+ * Copyright (C) 2008 Intel Corp
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * TODO
+ *	-	cache alarm and critical limit registers
+ *	-	add emc1404 support
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/mutex.h>
+
+#define THERMAL_PID_REG		0xfd
+#define THERMAL_SMSC_ID_REG	0xfe
+#define THERMAL_REVISION_REG	0xff
+
+struct thermal_data {
+	struct device *hwmon_dev;
+	struct mutex mutex;
+	/* Cache the hyst value so we don't keep re-reading it. In theory
+	   we could cache it forever as nobody else should be writing it. */
+	u8 cached_hyst;
+	unsigned long hyst_valid;
+};
+
+static ssize_t show_temp(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+	int retval = i2c_smbus_read_byte_data(client, sda->index);
+
+	if (retval < 0)
+		return retval;
+	return sprintf(buf, "%d000\n", retval);
+}
+
+static ssize_t show_bit(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sensor_device_attribute_2 *sda = to_sensor_dev_attr_2(attr);
+	int retval = i2c_smbus_read_byte_data(client, sda->nr);
+
+	if (retval < 0)
+		return retval;
+	retval &= sda->index;
+	return sprintf(buf, "%d\n", retval ? 1 : 0);
+}
+
+static ssize_t store_temp(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long val;
+	int retval;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+	retval = i2c_smbus_write_byte_data(client, sda->index,
+					DIV_ROUND_CLOSEST(val, 1000));
+	if (retval < 0)
+		return retval;
+	return count;
+}
+
+static ssize_t show_hyst(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct thermal_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+	int retval;
+	int hyst;
+
+	retval = i2c_smbus_read_byte_data(client, sda->index);
+	if (retval < 0)
+		return retval;
+
+	if (time_after(jiffies, data->hyst_valid)) {
+		hyst = i2c_smbus_read_byte_data(client, 0x21);
+		if (hyst < 0)
+			return retval;
+		data->cached_hyst = hyst;
+		data->hyst_valid = jiffies + HZ;
+	}
+	return sprintf(buf, "%d000\n", retval - data->cached_hyst);
+}
+
+static ssize_t store_hyst(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct thermal_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+	int retval;
+	int hyst;
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->mutex);
+	retval = i2c_smbus_read_byte_data(client, sda->index);
+	if (retval < 0)
+		goto fail;
+
+	hyst = val - retval * 1000;
+	hyst = DIV_ROUND_CLOSEST(hyst, 1000);
+	if (hyst < 0 || hyst > 255) {
+		retval = -ERANGE;
+		goto fail;
+	}
+
+	retval = i2c_smbus_write_byte_data(client, 0x21, hyst);
+	if (retval == 0) {
+		retval = count;
+		data->cached_hyst = hyst;
+		data->hyst_valid = jiffies + HZ;
+	}
+fail:
+	mutex_unlock(&data->mutex);
+	return retval;
+}
+
+/*
+ *	Sensors. We pass the actual i2c register to the methods.
+ */
+
+static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR,
+	show_temp, store_temp, 0x06);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
+	show_temp, store_temp, 0x05);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO | S_IWUSR,
+	show_temp, store_temp, 0x20);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0x00);
+static SENSOR_DEVICE_ATTR_2(temp1_min_alarm, S_IRUGO,
+	show_bit, NULL, 0x36, 0x01);
+static SENSOR_DEVICE_ATTR_2(temp1_max_alarm, S_IRUGO,
+	show_bit, NULL, 0x35, 0x01);
+static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO,
+	show_bit, NULL, 0x37, 0x01);
+static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO | S_IWUSR,
+	show_hyst, store_hyst, 0x20);
+
+static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR,
+	show_temp, store_temp, 0x08);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR,
+	show_temp, store_temp, 0x07);
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO | S_IWUSR,
+	show_temp, store_temp, 0x19);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 0x01);
+static SENSOR_DEVICE_ATTR_2(temp2_min_alarm, S_IRUGO,
+	show_bit, NULL, 0x36, 0x02);
+static SENSOR_DEVICE_ATTR_2(temp2_max_alarm, S_IRUGO,
+	show_bit, NULL, 0x35, 0x02);
+static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO,
+	show_bit, NULL, 0x37, 0x02);
+static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO | S_IWUSR,
+	show_hyst, store_hyst, 0x19);
+
+static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO | S_IWUSR,
+	show_temp, store_temp, 0x16);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO | S_IWUSR,
+	show_temp, store_temp, 0x15);
+static SENSOR_DEVICE_ATTR(temp3_crit, S_IRUGO | S_IWUSR,
+	show_temp, store_temp, 0x1A);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 0x23);
+static SENSOR_DEVICE_ATTR_2(temp3_min_alarm, S_IRUGO,
+	show_bit, NULL, 0x36, 0x04);
+static SENSOR_DEVICE_ATTR_2(temp3_max_alarm, S_IRUGO,
+	show_bit, NULL, 0x35, 0x04);
+static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO,
+	show_bit, NULL, 0x37, 0x04);
+static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO | S_IWUSR,
+	show_hyst, store_hyst, 0x1A);
+
+static struct attribute *mid_att_thermal[] = {
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_crit.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group m_thermal_gr = {
+	.attrs = mid_att_thermal
+};
+
+static int emc1403_detect(struct i2c_client *client,
+			struct i2c_board_info *info)
+{
+	int id;
+	/* Check if thermal chip is SMSC and EMC1403 */
+
+	id = i2c_smbus_read_byte_data(client, THERMAL_SMSC_ID_REG);
+	if (id != 0x5d)
+		return -ENODEV;
+
+	/* Note: 0x25 is the 1404 which is very similar and this
+	   driver could be extended */
+	id = i2c_smbus_read_byte_data(client, THERMAL_PID_REG);
+	if (id != 0x21)
+		return -ENODEV;
+
+	id = i2c_smbus_read_byte_data(client, THERMAL_REVISION_REG);
+	if (id != 0x01)
+		return -ENODEV;
+
+	strlcpy(info->type, "emc1403", I2C_NAME_SIZE);
+	return 0;
+}
+
+static int emc1403_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int res;
+	struct thermal_data *data;
+
+	data = kzalloc(sizeof(struct thermal_data), GFP_KERNEL);
+	if (data == NULL) {
+		dev_warn(&client->dev, "out of memory");
+		return -ENOMEM;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->mutex);
+	data->hyst_valid = jiffies - 1;		/* Expired */
+
+	res = sysfs_create_group(&client->dev.kobj, &m_thermal_gr);
+	if (res) {
+		dev_warn(&client->dev, "create group failed\n");
+		hwmon_device_unregister(data->hwmon_dev);
+		goto thermal_error1;
+	}
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		res = PTR_ERR(data->hwmon_dev);
+		dev_warn(&client->dev, "register hwmon dev failed\n");
+		goto thermal_error2;
+	}
+	dev_info(&client->dev, "EMC1403 Thermal chip found\n");
+	return res;
+
+thermal_error2:
+	sysfs_remove_group(&client->dev.kobj, &m_thermal_gr);
+thermal_error1:
+	kfree(data);
+	return res;
+}
+
+static int emc1403_remove(struct i2c_client *client)
+{
+	struct thermal_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &m_thermal_gr);
+	kfree(data);
+	return 0;
+}
+
+static const unsigned short emc1403_address_list[] = {
+	0x18, 0x2a, 0x4c, 0x4d, I2C_CLIENT_END
+};
+
+static const struct i2c_device_id emc1403_idtable[] = {
+	{ "emc1403", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, emc1403_idtable);
+
+static struct i2c_driver sensor_emc1403 = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		.name = "emc1403",
+	},
+	.detect = emc1403_detect,
+	.probe = emc1403_probe,
+	.remove = emc1403_remove,
+	.id_table = emc1403_idtable,
+	.address_list = emc1403_address_list,
+};
+
+static int __init sensor_emc1403_init(void)
+{
+	return i2c_add_driver(&sensor_emc1403);
+}
+
+static void  __exit sensor_emc1403_exit(void)
+{
+	i2c_del_driver(&sensor_emc1403);
+}
+
+module_init(sensor_emc1403_init);
+module_exit(sensor_emc1403_exit);
+
+MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com");
+MODULE_DESCRIPTION("emc1403 Thermal Driver");
+MODULE_LICENSE("GPL v2");

drivers/hwmon/f71882fg.c

@@ -856,21 +856,19 @@ static inline int superio_inb(int base, int reg)
 static int superio_inw(int base, int reg)
 {
 	int val;
-	outb(reg++, base);
-	val = inb(base + 1) << 8;
-	outb(reg, base);
-	val |= inb(base + 1);
+	val  = superio_inb(base, reg) << 8;
+	val |= superio_inb(base, reg + 1);
 	return val;
 }
 
 static inline void superio_enter(int base)
 {
 	/* according to the datasheet the key must be send twice! */
-	outb( SIO_UNLOCK_KEY, base);
-	outb( SIO_UNLOCK_KEY, base);
+	outb(SIO_UNLOCK_KEY, base);
+	outb(SIO_UNLOCK_KEY, base);
 }
 
-static inline void superio_select( int base, int ld)
+static inline void superio_select(int base, int ld)
 {
 	outb(SIO_REG_LDSEL, base);
 	outb(ld, base + 1);
@@ -905,10 +903,8 @@ static u16 f71882fg_read16(struct f71882fg_data *data, u8 reg)
 {
 	u16 val;
 
-	outb(reg++, data->addr + ADDR_REG_OFFSET);
-	val = inb(data->addr + DATA_REG_OFFSET) << 8;
-	outb(reg, data->addr + ADDR_REG_OFFSET);
-	val |= inb(data->addr + DATA_REG_OFFSET);
+	val  = f71882fg_read8(data, reg) << 8;
+	val |= f71882fg_read8(data, reg + 1);
 
 	return val;
 }
@@ -921,10 +917,8 @@ static void f71882fg_write8(struct f71882fg_data *data, u8 reg, u8 val)
 
 static void f71882fg_write16(struct f71882fg_data *data, u8 reg, u16 val)
 {
-	outb(reg++, data->addr + ADDR_REG_OFFSET);
-	outb(val >> 8, data->addr + DATA_REG_OFFSET);
-	outb(reg, data->addr + ADDR_REG_OFFSET);
-	outb(val & 255, data->addr + DATA_REG_OFFSET);
+	f71882fg_write8(data, reg,     val >> 8);
+	f71882fg_write8(data, reg + 1, val & 0xff);
 }
 
 static u16 f71882fg_read_temp(struct f71882fg_data *data, int nr)
@@ -945,7 +939,7 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 	mutex_lock(&data->update_lock);
 
 	/* Update once every 60 seconds */
-	if ( time_after(jiffies, data->last_limits + 60 * HZ ) ||
+	if (time_after(jiffies, data->last_limits + 60 * HZ) ||
 			!data->valid) {
 		if (data->type == f71882fg || data->type == f71889fg) {
 			data->in1_max =
@@ -1127,8 +1121,12 @@ static ssize_t store_fan_full_speed(struct device *dev,
 				    const char *buf, size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int nr = to_sensor_dev_attr_2(devattr)->index;
-	long val = simple_strtol(buf, NULL, 10);
+	int err, nr = to_sensor_dev_attr_2(devattr)->index;
+	long val;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
 
 	val = SENSORS_LIMIT(val, 23, 1500000);
 	val = fan_to_reg(val);
@@ -1157,8 +1155,12 @@ static ssize_t store_fan_beep(struct device *dev, struct device_attribute
 	*devattr, const char *buf, size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int nr = to_sensor_dev_attr_2(devattr)->index;
-	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int err, nr = to_sensor_dev_attr_2(devattr)->index;
+	unsigned long val;
+
+	err = strict_strtoul(buf, 10, &val);
+	if (err)
+		return err;
 
 	mutex_lock(&data->update_lock);
 	data->fan_beep = f71882fg_read8(data, F71882FG_REG_FAN_BEEP);
@@ -1206,7 +1208,14 @@ static ssize_t store_in_max(struct device *dev, struct device_attribute
 	*devattr, const char *buf, size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	long val = simple_strtol(buf, NULL, 10) / 8;
+	int err;
+	long val;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	val /= 8;
 	val = SENSORS_LIMIT(val, 0, 255);
 
 	mutex_lock(&data->update_lock);
@@ -1233,8 +1242,12 @@ static ssize_t store_in_beep(struct device *dev, struct device_attribute
 	*devattr, const char *buf, size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int nr = to_sensor_dev_attr_2(devattr)->index;
-	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int err, nr = to_sensor_dev_attr_2(devattr)->index;
+	unsigned long val;
+
+	err = strict_strtoul(buf, 10, &val);
+	if (err)
+		return err;
 
 	mutex_lock(&data->update_lock);
 	data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP);
@@ -1299,8 +1312,14 @@ static ssize_t store_temp_max(struct device *dev, struct device_attribute
 	*devattr, const char *buf, size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int nr = to_sensor_dev_attr_2(devattr)->index;
-	long val = simple_strtol(buf, NULL, 10) / 1000;
+	int err, nr = to_sensor_dev_attr_2(devattr)->index;
+	long val;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	val /= 1000;
 	val = SENSORS_LIMIT(val, 0, 255);
 
 	mutex_lock(&data->update_lock);
@@ -1333,10 +1352,16 @@ static ssize_t store_temp_max_hyst(struct device *dev, struct device_attribute
 	*devattr, const char *buf, size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int nr = to_sensor_dev_attr_2(devattr)->index;
-	long val = simple_strtol(buf, NULL, 10) / 1000;
+	int err, nr = to_sensor_dev_attr_2(devattr)->index;
 	ssize_t ret = count;
 	u8 reg;
+	long val;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	val /= 1000;
 
 	mutex_lock(&data->update_lock);
 
@@ -1372,8 +1397,14 @@ static ssize_t store_temp_crit(struct device *dev, struct device_attribute
 	*devattr, const char *buf, size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int nr = to_sensor_dev_attr_2(devattr)->index;
-	long val = simple_strtol(buf, NULL, 10) / 1000;
+	int err, nr = to_sensor_dev_attr_2(devattr)->index;
+	long val;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	val /= 1000;
 	val = SENSORS_LIMIT(val, 0, 255);
 
 	mutex_lock(&data->update_lock);
@@ -1427,8 +1458,12 @@ static ssize_t store_temp_beep(struct device *dev, struct device_attribute
 	*devattr, const char *buf, size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int nr = to_sensor_dev_attr_2(devattr)->index;
-	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int err, nr = to_sensor_dev_attr_2(devattr)->index;
+	unsigned long val;
+
+	err = strict_strtoul(buf, 10, &val);
+	if (err)
+		return err;
 
 	mutex_lock(&data->update_lock);
 	data->temp_beep = f71882fg_read8(data, F71882FG_REG_TEMP_BEEP);
@@ -1490,8 +1525,13 @@ static ssize_t store_pwm(struct device *dev,
 			 size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int nr = to_sensor_dev_attr_2(devattr)->index;
-	long val = simple_strtol(buf, NULL, 10);
+	int err, nr = to_sensor_dev_attr_2(devattr)->index;
+	long val;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
+
 	val = SENSORS_LIMIT(val, 0, 255);
 
 	mutex_lock(&data->update_lock);
@@ -1551,8 +1591,12 @@ static ssize_t store_pwm_enable(struct device *dev, struct device_attribute
 				*devattr, const char *buf, size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int nr = to_sensor_dev_attr_2(devattr)->index;
-	long val = simple_strtol(buf, NULL, 10);
+	int err, nr = to_sensor_dev_attr_2(devattr)->index;
+	long val;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
 
 	/* Special case for F8000 pwm channel 3 which only does auto mode */
 	if (data->type == f8000 && nr == 2 && val != 2)
@@ -1626,9 +1670,14 @@ static ssize_t store_pwm_auto_point_pwm(struct device *dev,
 					const char *buf, size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int pwm = to_sensor_dev_attr_2(devattr)->index;
+	int err, pwm = to_sensor_dev_attr_2(devattr)->index;
 	int point = to_sensor_dev_attr_2(devattr)->nr;
-	long val = simple_strtol(buf, NULL, 10);
+	long val;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
+
 	val = SENSORS_LIMIT(val, 0, 255);
 
 	mutex_lock(&data->update_lock);
@@ -1674,10 +1723,16 @@ static ssize_t store_pwm_auto_point_temp_hyst(struct device *dev,
 					      const char *buf, size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int nr = to_sensor_dev_attr_2(devattr)->index;
+	int err, nr = to_sensor_dev_attr_2(devattr)->index;
 	int point = to_sensor_dev_attr_2(devattr)->nr;
-	long val = simple_strtol(buf, NULL, 10) / 1000;
 	u8 reg;
+	long val;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	val /= 1000;
 
 	mutex_lock(&data->update_lock);
 	data->pwm_auto_point_temp[nr][point] =
@@ -1716,8 +1771,12 @@ static ssize_t store_pwm_interpolate(struct device *dev,
 				     const char *buf, size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int nr = to_sensor_dev_attr_2(devattr)->index;
-	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int err, nr = to_sensor_dev_attr_2(devattr)->index;
+	unsigned long val;
+
+	err = strict_strtoul(buf, 10, &val);
+	if (err)
+		return err;
 
 	mutex_lock(&data->update_lock);
 	data->pwm_auto_point_mapping[nr] =
@@ -1752,8 +1811,12 @@ static ssize_t store_pwm_auto_point_channel(struct device *dev,
 					    const char *buf, size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int nr = to_sensor_dev_attr_2(devattr)->index;
-	long val = simple_strtol(buf, NULL, 10);
+	int err, nr = to_sensor_dev_attr_2(devattr)->index;
+	long val;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
 
 	switch (val) {
 	case 1:
@@ -1798,9 +1861,15 @@ static ssize_t store_pwm_auto_point_temp(struct device *dev,
 					 const char *buf, size_t count)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int pwm = to_sensor_dev_attr_2(devattr)->index;
+	int err, pwm = to_sensor_dev_attr_2(devattr)->index;
 	int point = to_sensor_dev_attr_2(devattr)->nr;
-	long val = simple_strtol(buf, NULL, 10) / 1000;
+	long val;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	val /= 1000;
 
 	if (data->type == f71889fg)
 		val = SENSORS_LIMIT(val, -128, 127);
@@ -2109,6 +2178,13 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 	int err = -ENODEV;
 	u16 devid;
 
+	/* Don't step on other drivers' I/O space by accident */
+	if (!request_region(sioaddr, 2, DRVNAME)) {
+		printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
+				(int)sioaddr);
+		return -EBUSY;
+	}
+
 	superio_enter(sioaddr);
 
 	devid = superio_inw(sioaddr, SIO_REG_MANID);
@@ -2151,8 +2227,7 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 	}
 
 	*address = superio_inw(sioaddr, SIO_REG_ADDR);
-	if (*address == 0)
-	{
+	if (*address == 0) {
 		printk(KERN_WARNING DRVNAME ": Base address not set\n");
 		goto exit;
 	}
@@ -2164,6 +2239,7 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 		(int)superio_inb(sioaddr, SIO_REG_DEVREV));
 exit:
 	superio_exit(sioaddr);
+	release_region(sioaddr, 2);
 	return err;
 }
 

drivers/hwmon/lm63.c

@@ -53,7 +53,7 @@
  * Address is fully defined internally and cannot be changed.
  */
 
-static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END };
 
 /*
  * The LM63 registers
@@ -131,12 +131,15 @@ static struct lm63_data *lm63_update_device(struct device *dev);
 static int lm63_detect(struct i2c_client *client, struct i2c_board_info *info);
 static void lm63_init_client(struct i2c_client *client);
 
+enum chips { lm63, lm64 };
+
 /*
  * Driver data (common to all clients)
  */
 
 static const struct i2c_device_id lm63_id[] = {
-	{ "lm63", 0 },
+	{ "lm63", lm63 },
+	{ "lm64", lm64 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm63_id);
@@ -422,6 +425,7 @@ static int lm63_detect(struct i2c_client *new_client,
 	struct i2c_adapter *adapter = new_client->adapter;
 	u8 man_id, chip_id, reg_config1, reg_config2;
 	u8 reg_alert_status, reg_alert_mask;
+	int address = new_client->addr;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
@@ -439,7 +443,6 @@ static int lm63_detect(struct i2c_client *new_client,
 			 LM63_REG_ALERT_MASK);
 
 	if (man_id != 0x01 /* National Semiconductor */
-	 || chip_id != 0x41 /* LM63 */
 	 || (reg_config1 & 0x18) != 0x00
 	 || (reg_config2 & 0xF8) != 0x00
 	 || (reg_alert_status & 0x20) != 0x00
@@ -450,7 +453,12 @@ static int lm63_detect(struct i2c_client *new_client,
 		return -ENODEV;
 	}
 
+	if (chip_id == 0x41 && address == 0x4c)
 		strlcpy(info->type, "lm63", I2C_NAME_SIZE);
+	else if (chip_id == 0x51 && (address == 0x18 || address == 0x4e))
+		strlcpy(info->type, "lm64", I2C_NAME_SIZE);
+	else
+		return -ENODEV;
 
 	return 0;
 }

drivers/hwmon/lm75.c

@@ -46,6 +46,7 @@ enum lm75_type {		/* keep sorted in alphabetical order */
 	tcn75,
 	tmp100,
 	tmp101,
+	tmp105,
 	tmp175,
 	tmp275,
 	tmp75,
@@ -220,6 +221,7 @@ static const struct i2c_device_id lm75_ids[] = {
 	{ "tcn75", tcn75, },
 	{ "tmp100", tmp100, },
 	{ "tmp101", tmp101, },
+	{ "tmp105", tmp105, },
 	{ "tmp175", tmp175, },
 	{ "tmp275", tmp275, },
 	{ "tmp75", tmp75, },

drivers/hwmon/lm90.c

@@ -982,7 +982,8 @@ static struct lm90_data *lm90_update_device(struct device *dev)
 
 	mutex_lock(&data->update_lock);
 
-	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+	if (time_after(jiffies, data->last_updated + HZ / 2 + HZ / 10)
+	 || !data->valid) {
 		u8 h, l;
 
 		dev_dbg(&client->dev, "Updating lm90 data.\n");

drivers/hwmon/ltc4245.c

@@ -45,9 +45,7 @@ enum ltc4245_cmd {
 	LTC4245_VEEIN			= 0x19,
 	LTC4245_VEESENSE		= 0x1a,
 	LTC4245_VEEOUT			= 0x1b,
-	LTC4245_GPIOADC1		= 0x1c,
-	LTC4245_GPIOADC2		= 0x1d,
-	LTC4245_GPIOADC3		= 0x1e,
+	LTC4245_GPIOADC			= 0x1c,
 };
 
 struct ltc4245_data {
@@ -61,7 +59,7 @@ struct ltc4245_data {
 	u8 cregs[0x08];
 
 	/* Voltage registers */
-	u8 vregs[0x0f];
+	u8 vregs[0x0d];
 };
 
 static struct ltc4245_data *ltc4245_update_device(struct device *dev)
@@ -86,7 +84,7 @@ static struct ltc4245_data *ltc4245_update_device(struct device *dev)
 				data->cregs[i] = val;
 		}
 
-		/* Read voltage registers -- 0x10 to 0x1f */
+		/* Read voltage registers -- 0x10 to 0x1c */
 		for (i = 0; i < ARRAY_SIZE(data->vregs); i++) {
 			val = i2c_smbus_read_byte_data(client, i+0x10);
 			if (unlikely(val < 0))
@@ -128,9 +126,7 @@ static int ltc4245_get_voltage(struct device *dev, u8 reg)
 	case LTC4245_VEEOUT:
 		voltage = regval * -55;
 		break;
-	case LTC4245_GPIOADC1:
-	case LTC4245_GPIOADC2:
-	case LTC4245_GPIOADC3:
+	case LTC4245_GPIOADC:
 		voltage = regval * 10;
 		break;
 	default:
@@ -297,9 +293,7 @@ LTC4245_ALARM(in7_min_alarm,	(1 << 2),	LTC4245_FAULT2);
 LTC4245_ALARM(in8_min_alarm,	(1 << 3),	LTC4245_FAULT2);
 
 /* GPIO voltages */
-LTC4245_VOLTAGE(in9_input,			LTC4245_GPIOADC1);
-LTC4245_VOLTAGE(in10_input,			LTC4245_GPIOADC2);
-LTC4245_VOLTAGE(in11_input,			LTC4245_GPIOADC3);
+LTC4245_VOLTAGE(in9_input,			LTC4245_GPIOADC);
 
 /* Power Consumption (virtual) */
 LTC4245_POWER(power1_input,			LTC4245_12VSENSE);
@@ -342,8 +336,6 @@ static struct attribute *ltc4245_attributes[] = {
 	&sensor_dev_attr_in8_min_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_in9_input.dev_attr.attr,
-	&sensor_dev_attr_in10_input.dev_attr.attr,
-	&sensor_dev_attr_in11_input.dev_attr.attr,
 
 	&sensor_dev_attr_power1_input.dev_attr.attr,
 	&sensor_dev_attr_power2_input.dev_attr.attr,

drivers/hwmon/tmp102.c

+/* Texas Instruments TMP102 SMBus temperature sensor driver
+ *
+ * Copyright (C) 2010 Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+
+#define	DRIVER_NAME "tmp102"
+
+#define	TMP102_TEMP_REG			0x00
+#define	TMP102_CONF_REG			0x01
+/* note: these bit definitions are byte swapped */
+#define		TMP102_CONF_SD		0x0100
+#define		TMP102_CONF_TM		0x0200
+#define		TMP102_CONF_POL		0x0400
+#define		TMP102_CONF_F0		0x0800
+#define		TMP102_CONF_F1		0x1000
+#define		TMP102_CONF_R0		0x2000
+#define		TMP102_CONF_R1		0x4000
+#define		TMP102_CONF_OS		0x8000
+#define		TMP102_CONF_EM		0x0010
+#define		TMP102_CONF_AL		0x0020
+#define		TMP102_CONF_CR0		0x0040
+#define		TMP102_CONF_CR1		0x0080
+#define	TMP102_TLOW_REG			0x02
+#define	TMP102_THIGH_REG		0x03
+
+struct tmp102 {
+	struct device *hwmon_dev;
+	struct mutex lock;
+	u16 config_orig;
+	unsigned long last_update;
+	int temp[3];
+};
+
+/* SMBus specifies low byte first, but the TMP102 returns high byte first,
+ * so we have to swab16 the values */
+static inline int tmp102_read_reg(struct i2c_client *client, u8 reg)
+{
+	int result = i2c_smbus_read_word_data(client, reg);
+	return result < 0 ? result : swab16(result);
+}
+
+static inline int tmp102_write_reg(struct i2c_client *client, u8 reg, u16 val)
+{
+	return i2c_smbus_write_word_data(client, reg, swab16(val));
+}
+
+/* convert left adjusted 13-bit TMP102 register value to milliCelsius */
+static inline int tmp102_reg_to_mC(s16 val)
+{
+	return ((val & ~0x01) * 1000) / 128;
+}
+
+/* convert milliCelsius to left adjusted 13-bit TMP102 register value */
+static inline u16 tmp102_mC_to_reg(int val)
+{
+	return (val * 128) / 1000;
+}
+
+static const u8 tmp102_reg[] = {
+	TMP102_TEMP_REG,
+	TMP102_TLOW_REG,
+	TMP102_THIGH_REG,
+};
+
+static struct tmp102 *tmp102_update_device(struct i2c_client *client)
+{
+	struct tmp102 *tmp102 = i2c_get_clientdata(client);
+
+	mutex_lock(&tmp102->lock);
+	if (time_after(jiffies, tmp102->last_update + HZ / 3)) {
+		int i;
+		for (i = 0; i < ARRAY_SIZE(tmp102->temp); ++i) {
+			int status = tmp102_read_reg(client, tmp102_reg[i]);
+			if (status > -1)
+				tmp102->temp[i] = tmp102_reg_to_mC(status);
+		}
+		tmp102->last_update = jiffies;
+	}
+	mutex_unlock(&tmp102->lock);
+	return tmp102;
+}
+
+static ssize_t tmp102_show_temp(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+	struct tmp102 *tmp102 = tmp102_update_device(to_i2c_client(dev));
+
+	return sprintf(buf, "%d\n", tmp102->temp[sda->index]);
+}
+
+static ssize_t tmp102_set_temp(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tmp102 *tmp102 = i2c_get_clientdata(client);
+	long val;
+	int status;
+
+	if (strict_strtol(buf, 10, &val) < 0)
+		return -EINVAL;
+	val = SENSORS_LIMIT(val, -256000, 255000);
+
+	mutex_lock(&tmp102->lock);
+	tmp102->temp[sda->index] = val;
+	status = tmp102_write_reg(client, tmp102_reg[sda->index],
+				  tmp102_mC_to_reg(val));
+	mutex_unlock(&tmp102->lock);
+	return status ? : count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, tmp102_show_temp, NULL , 0);
+
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, tmp102_show_temp,
+			  tmp102_set_temp, 1);
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, tmp102_show_temp,
+			  tmp102_set_temp, 2);
+
+static struct attribute *tmp102_attributes[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group tmp102_attr_group = {
+	.attrs = tmp102_attributes,
+};
+
+#define TMP102_CONFIG  (TMP102_CONF_TM | TMP102_CONF_EM | TMP102_CONF_CR1)
+#define TMP102_CONFIG_RD_ONLY (TMP102_CONF_R0 | TMP102_CONF_R1 | TMP102_CONF_AL)
+
+static int __devinit tmp102_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct tmp102 *tmp102;
+	int status;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WORD_DATA)) {
+		dev_err(&client->dev, "adapter doesnt support SMBus word "
+			"transactions\n");
+		return -ENODEV;
+	}
+
+	tmp102 = kzalloc(sizeof(*tmp102), GFP_KERNEL);
+	if (!tmp102) {
+		dev_dbg(&client->dev, "kzalloc failed\n");
+		return -ENOMEM;
+	}
+	i2c_set_clientdata(client, tmp102);
+
+	status = tmp102_read_reg(client, TMP102_CONF_REG);
+	if (status < 0) {
+		dev_err(&client->dev, "error reading config register\n");
+		goto fail_free;
+	}
+	tmp102->config_orig = status;
+	status = tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONFIG);
+	if (status < 0) {
+		dev_err(&client->dev, "error writing config register\n");
+		goto fail_restore_config;
+	}
+	status = tmp102_read_reg(client, TMP102_CONF_REG);
+	if (status < 0) {
+		dev_err(&client->dev, "error reading config register\n");
+		goto fail_restore_config;
+	}
+	status &= ~TMP102_CONFIG_RD_ONLY;
+	if (status != TMP102_CONFIG) {
+		dev_err(&client->dev, "config settings did not stick\n");
+		status = -ENODEV;
+		goto fail_restore_config;
+	}
+	tmp102->last_update = jiffies - HZ;
+	mutex_init(&tmp102->lock);
+
+	status = sysfs_create_group(&client->dev.kobj, &tmp102_attr_group);
+	if (status) {
+		dev_dbg(&client->dev, "could not create sysfs files\n");
+		goto fail_restore_config;
+	}
+	tmp102->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(tmp102->hwmon_dev)) {
+		dev_dbg(&client->dev, "unable to register hwmon device\n");
+		status = PTR_ERR(tmp102->hwmon_dev);
+		goto fail_remove_sysfs;
+	}
+
+	dev_info(&client->dev, "initialized\n");
+
+	return 0;
+
+fail_remove_sysfs:
+	sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
+fail_restore_config:
+	tmp102_write_reg(client, TMP102_CONF_REG, tmp102->config_orig);
+fail_free:
+	i2c_set_clientdata(client, NULL);
+	kfree(tmp102);
+
+	return status;
+}
+
+static int __devexit tmp102_remove(struct i2c_client *client)
+{
+	struct tmp102 *tmp102 = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(tmp102->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
+
+	/* Stop monitoring if device was stopped originally */
+	if (tmp102->config_orig & TMP102_CONF_SD) {
+		int config;
+
+		config = tmp102_read_reg(client, TMP102_CONF_REG);
+		if (config >= 0)
+			tmp102_write_reg(client, TMP102_CONF_REG,
+					 config | TMP102_CONF_SD);
+	}
+
+	i2c_set_clientdata(client, NULL);
+	kfree(tmp102);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int tmp102_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int config;
+
+	config = tmp102_read_reg(client, TMP102_CONF_REG);
+	if (config < 0)
+		return config;
+
+	config |= TMP102_CONF_SD;
+	return tmp102_write_reg(client, TMP102_CONF_REG, config);
+}
+
+static int tmp102_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int config;
+
+	config = tmp102_read_reg(client, TMP102_CONF_REG);
+	if (config < 0)
+		return config;
+
+	config &= ~TMP102_CONF_SD;
+	return tmp102_write_reg(client, TMP102_CONF_REG, config);
+}
+
+static const struct dev_pm_ops tmp102_dev_pm_ops = {
+	.suspend	= tmp102_suspend,
+	.resume		= tmp102_resume,
+};
+
+#define TMP102_DEV_PM_OPS (&tmp102_dev_pm_ops)
+#else
+#define	TMP102_DEV_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+static const struct i2c_device_id tmp102_id[] = {
+	{ "tmp102", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tmp102_id);
+
+static struct i2c_driver tmp102_driver = {
+	.driver.name	= DRIVER_NAME,
+	.driver.pm	= TMP102_DEV_PM_OPS,
+	.probe		= tmp102_probe,
+	.remove		= __devexit_p(tmp102_remove),
+	.id_table	= tmp102_id,
+};
+
+static int __init tmp102_init(void)
+{
+	return i2c_add_driver(&tmp102_driver);
+}
+module_init(tmp102_init);
+
+static void __exit tmp102_exit(void)
+{
+	i2c_del_driver(&tmp102_driver);
+}
+module_exit(tmp102_exit);
+
+MODULE_AUTHOR("Steven King <sfking@fdwdc.com>");
+MODULE_DESCRIPTION("Texas Instruments TMP102 temperature sensor driver");
+MODULE_LICENSE("GPL");

drivers/hwmon/tmp401.c

@@ -91,17 +91,6 @@ static const u8 TMP411_TEMP_HIGHEST_LSB[2]		= { 0x33, 0x37 };
 #define TMP401_DEVICE_ID			0x11
 #define TMP411_DEVICE_ID			0x12
 
-/*
- * Functions declarations
- */
-
-static int tmp401_probe(struct i2c_client *client,
-			const struct i2c_device_id *id);
-static int tmp401_detect(struct i2c_client *client,
-			 struct i2c_board_info *info);
-static int tmp401_remove(struct i2c_client *client);
-static struct tmp401_data *tmp401_update_device(struct device *dev);
-
 /*
  * Driver data (common to all clients)
  */
@@ -113,18 +102,6 @@ static const struct i2c_device_id tmp401_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, tmp401_id);
 
-static struct i2c_driver tmp401_driver = {
-	.class		= I2C_CLASS_HWMON,
-	.driver = {
-		.name	= "tmp401",
-	},
-	.probe		= tmp401_probe,
-	.remove		= tmp401_remove,
-	.id_table	= tmp401_id,
-	.detect		= tmp401_detect,
-	.address_list	= normal_i2c,
-};
-
 /*
  * Client data (each client gets its own)
  */
@@ -194,6 +171,71 @@ static u8 tmp401_crit_temp_to_register(long temp, u8 config)
 	return (temp + 500) / 1000;
 }
 
+static struct tmp401_data *tmp401_update_device_reg16(
+	struct i2c_client *client, struct tmp401_data *data)
+{
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		/*
+		 * High byte must be read first immediately followed
+		 * by the low byte
+		 */
+		data->temp[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_MSB[i]) << 8;
+		data->temp[i] |= i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_LSB[i]);
+		data->temp_low[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_LOW_LIMIT_MSB_READ[i]) << 8;
+		data->temp_low[i] |= i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_LOW_LIMIT_LSB[i]);
+		data->temp_high[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_HIGH_LIMIT_MSB_READ[i]) << 8;
+		data->temp_high[i] |= i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_HIGH_LIMIT_LSB[i]);
+		data->temp_crit[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_CRIT_LIMIT[i]);
+
+		if (data->kind == tmp411) {
+			data->temp_lowest[i] = i2c_smbus_read_byte_data(client,
+				TMP411_TEMP_LOWEST_MSB[i]) << 8;
+			data->temp_lowest[i] |= i2c_smbus_read_byte_data(
+				client, TMP411_TEMP_LOWEST_LSB[i]);
+
+			data->temp_highest[i] = i2c_smbus_read_byte_data(
+				client, TMP411_TEMP_HIGHEST_MSB[i]) << 8;
+			data->temp_highest[i] |= i2c_smbus_read_byte_data(
+				client, TMP411_TEMP_HIGHEST_LSB[i]);
+		}
+	}
+	return data;
+}
+
+static struct tmp401_data *tmp401_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tmp401_data *data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		data->status = i2c_smbus_read_byte_data(client, TMP401_STATUS);
+		data->config = i2c_smbus_read_byte_data(client,
+						TMP401_CONFIG_READ);
+		tmp401_update_device_reg16(client, data);
+
+		data->temp_crit_hyst = i2c_smbus_read_byte_data(client,
+						TMP401_TEMP_CRIT_HYST);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
 static ssize_t show_temp_value(struct device *dev,
 	struct device_attribute *devattr, char *buf)
 {
@@ -420,30 +462,36 @@ static ssize_t reset_temp_history(struct device *dev,
 }
 
 static struct sensor_device_attribute tmp401_attr[] = {
-	SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0),
-	SENSOR_ATTR(temp1_min, 0644, show_temp_min, store_temp_min, 0),
-	SENSOR_ATTR(temp1_max, 0644, show_temp_max, store_temp_max, 0),
-	SENSOR_ATTR(temp1_crit, 0644, show_temp_crit, store_temp_crit, 0),
-	SENSOR_ATTR(temp1_crit_hyst, 0644, show_temp_crit_hyst,
+	SENSOR_ATTR(temp1_input, S_IRUGO, show_temp_value, NULL, 0),
+	SENSOR_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
+		    store_temp_min, 0),
+	SENSOR_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
+		    store_temp_max, 0),
+	SENSOR_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_crit,
+		    store_temp_crit, 0),
+	SENSOR_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_crit_hyst,
 		    store_temp_crit_hyst, 0),
-	SENSOR_ATTR(temp1_min_alarm, 0444, show_status, NULL,
+	SENSOR_ATTR(temp1_min_alarm, S_IRUGO, show_status, NULL,
 		    TMP401_STATUS_LOCAL_LOW),
-	SENSOR_ATTR(temp1_max_alarm, 0444, show_status, NULL,
+	SENSOR_ATTR(temp1_max_alarm, S_IRUGO, show_status, NULL,
 		    TMP401_STATUS_LOCAL_HIGH),
-	SENSOR_ATTR(temp1_crit_alarm, 0444, show_status, NULL,
+	SENSOR_ATTR(temp1_crit_alarm, S_IRUGO, show_status, NULL,
 		    TMP401_STATUS_LOCAL_CRIT),
-	SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1),
-	SENSOR_ATTR(temp2_min, 0644, show_temp_min, store_temp_min, 1),
-	SENSOR_ATTR(temp2_max, 0644, show_temp_max, store_temp_max, 1),
-	SENSOR_ATTR(temp2_crit, 0644, show_temp_crit, store_temp_crit, 1),
-	SENSOR_ATTR(temp2_crit_hyst, 0444, show_temp_crit_hyst, NULL, 1),
-	SENSOR_ATTR(temp2_fault, 0444, show_status, NULL,
+	SENSOR_ATTR(temp2_input, S_IRUGO, show_temp_value, NULL, 1),
+	SENSOR_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,
+		    store_temp_min, 1),
+	SENSOR_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
+		    store_temp_max, 1),
+	SENSOR_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit,
+		    store_temp_crit, 1),
+	SENSOR_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, 1),
+	SENSOR_ATTR(temp2_fault, S_IRUGO, show_status, NULL,
 		    TMP401_STATUS_REMOTE_OPEN),
-	SENSOR_ATTR(temp2_min_alarm, 0444, show_status, NULL,
+	SENSOR_ATTR(temp2_min_alarm, S_IRUGO, show_status, NULL,
 		    TMP401_STATUS_REMOTE_LOW),
-	SENSOR_ATTR(temp2_max_alarm, 0444, show_status, NULL,
+	SENSOR_ATTR(temp2_max_alarm, S_IRUGO, show_status, NULL,
 		    TMP401_STATUS_REMOTE_HIGH),
-	SENSOR_ATTR(temp2_crit_alarm, 0444, show_status, NULL,
+	SENSOR_ATTR(temp2_crit_alarm, S_IRUGO, show_status, NULL,
 		    TMP401_STATUS_REMOTE_CRIT),
 };
 
@@ -455,11 +503,11 @@ static struct sensor_device_attribute tmp401_attr[] = {
  * and remote channels.
  */
 static struct sensor_device_attribute tmp411_attr[] = {
-	SENSOR_ATTR(temp1_highest, 0444, show_temp_highest, NULL, 0),
-	SENSOR_ATTR(temp1_lowest, 0444, show_temp_lowest, NULL, 0),
-	SENSOR_ATTR(temp2_highest, 0444, show_temp_highest, NULL, 1),
-	SENSOR_ATTR(temp2_lowest, 0444, show_temp_lowest, NULL, 1),
-	SENSOR_ATTR(temp_reset_history, 0200, NULL, reset_temp_history, 0),
+	SENSOR_ATTR(temp1_highest, S_IRUGO, show_temp_highest, NULL, 0),
+	SENSOR_ATTR(temp1_lowest, S_IRUGO, show_temp_lowest, NULL, 0),
+	SENSOR_ATTR(temp2_highest, S_IRUGO, show_temp_highest, NULL, 1),
+	SENSOR_ATTR(temp2_lowest, S_IRUGO, show_temp_lowest, NULL, 1),
+	SENSOR_ATTR(temp_reset_history, S_IWUSR, NULL, reset_temp_history, 0),
 };
 
 /*
@@ -529,6 +577,27 @@ static int tmp401_detect(struct i2c_client *client,
 	return 0;
 }
 
+static int tmp401_remove(struct i2c_client *client)
+{
+	struct tmp401_data *data = i2c_get_clientdata(client);
+	int i;
+
+	if (data->hwmon_dev)
+		hwmon_device_unregister(data->hwmon_dev);
+
+	for (i = 0; i < ARRAY_SIZE(tmp401_attr); i++)
+		device_remove_file(&client->dev, &tmp401_attr[i].dev_attr);
+
+	if (data->kind == tmp411) {
+		for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++)
+			device_remove_file(&client->dev,
+					   &tmp411_attr[i].dev_attr);
+	}
+
+	kfree(data);
+	return 0;
+}
+
 static int tmp401_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
@@ -581,91 +650,17 @@ static int tmp401_probe(struct i2c_client *client,
 	return err;
 }
 
-static int tmp401_remove(struct i2c_client *client)
-{
-	struct tmp401_data *data = i2c_get_clientdata(client);
-	int i;
-
-	if (data->hwmon_dev)
-		hwmon_device_unregister(data->hwmon_dev);
-
-	for (i = 0; i < ARRAY_SIZE(tmp401_attr); i++)
-		device_remove_file(&client->dev, &tmp401_attr[i].dev_attr);
-
-	if (data->kind == tmp411) {
-		for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++)
-			device_remove_file(&client->dev,
-					   &tmp411_attr[i].dev_attr);
-	}
-
-	kfree(data);
-	return 0;
-}
-
-static struct tmp401_data *tmp401_update_device_reg16(
-	struct i2c_client *client, struct tmp401_data *data)
-{
-	int i;
-
-	for (i = 0; i < 2; i++) {
-		/*
-		 * High byte must be read first immediately followed
-		 * by the low byte
-		 */
-		data->temp[i] = i2c_smbus_read_byte_data(client,
-			TMP401_TEMP_MSB[i]) << 8;
-		data->temp[i] |= i2c_smbus_read_byte_data(client,
-			TMP401_TEMP_LSB[i]);
-		data->temp_low[i] = i2c_smbus_read_byte_data(client,
-			TMP401_TEMP_LOW_LIMIT_MSB_READ[i]) << 8;
-		data->temp_low[i] |= i2c_smbus_read_byte_data(client,
-			TMP401_TEMP_LOW_LIMIT_LSB[i]);
-		data->temp_high[i] = i2c_smbus_read_byte_data(client,
-			TMP401_TEMP_HIGH_LIMIT_MSB_READ[i]) << 8;
-		data->temp_high[i] |= i2c_smbus_read_byte_data(client,
-			TMP401_TEMP_HIGH_LIMIT_LSB[i]);
-		data->temp_crit[i] = i2c_smbus_read_byte_data(client,
-			TMP401_TEMP_CRIT_LIMIT[i]);
-
-		if (data->kind == tmp411) {
-			data->temp_lowest[i] = i2c_smbus_read_byte_data(client,
-				TMP411_TEMP_LOWEST_MSB[i]) << 8;
-			data->temp_lowest[i] |= i2c_smbus_read_byte_data(
-				client, TMP411_TEMP_LOWEST_LSB[i]);
-
-			data->temp_highest[i] = i2c_smbus_read_byte_data(
-				client, TMP411_TEMP_HIGHEST_MSB[i]) << 8;
-			data->temp_highest[i] |= i2c_smbus_read_byte_data(
-				client, TMP411_TEMP_HIGHEST_LSB[i]);
-		}
-	}
-	return data;
-}
-
-static struct tmp401_data *tmp401_update_device(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct tmp401_data *data = i2c_get_clientdata(client);
-
-	mutex_lock(&data->update_lock);
-
-	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
-		data->status = i2c_smbus_read_byte_data(client, TMP401_STATUS);
-		data->config = i2c_smbus_read_byte_data(client,
-						TMP401_CONFIG_READ);
-		tmp401_update_device_reg16(client, data);
-
-		data->temp_crit_hyst = i2c_smbus_read_byte_data(client,
-						TMP401_TEMP_CRIT_HYST);
-
-		data->last_updated = jiffies;
-		data->valid = 1;
-	}
-
-	mutex_unlock(&data->update_lock);
-
-	return data;
-}
+static struct i2c_driver tmp401_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "tmp401",
+	},
+	.probe		= tmp401_probe,
+	.remove		= tmp401_remove,
+	.id_table	= tmp401_id,
+	.detect		= tmp401_detect,
+	.address_list	= normal_i2c,
+};
 
 static int __init tmp401_init(void)
 {

include/linux/acpi.h

@@ -248,6 +248,8 @@ int acpi_check_region(resource_size_t start, resource_size_t n,
 int acpi_check_mem_region(resource_size_t start, resource_size_t n,
 		      const char *name);
 
+int acpi_resources_are_enforced(void);
+
 #ifdef CONFIG_PM_SLEEP
 void __init acpi_no_s4_hw_signature(void);
 void __init acpi_old_suspend_ordering(void);