diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 9af7841f2e8c6010060c17a038bc8c86c792a729..06de34001c6695a5a741925e862d7baa05853c98 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -764,17 +764,17 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master,
 			(unsigned long long)xfer->rx_dma);
 	}
 
-	/* REVISIT: We're waiting for ENDRX before we start the next
+	/* REVISIT: We're waiting for RXBUFF before we start the next
 	 * transfer because we need to handle some difficult timing
-	 * issues otherwise. If we wait for ENDTX in one transfer and
-	 * then starts waiting for ENDRX in the next, it's difficult
-	 * to tell the difference between the ENDRX interrupt we're
-	 * actually waiting for and the ENDRX interrupt of the
+	 * issues otherwise. If we wait for TXBUFE in one transfer and
+	 * then starts waiting for RXBUFF in the next, it's difficult
+	 * to tell the difference between the RXBUFF interrupt we're
+	 * actually waiting for and the RXBUFF interrupt of the
 	 * previous transfer.
 	 *
 	 * It should be doable, though. Just not now...
 	 */
-	spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
+	spi_writel(as, IER, SPI_BIT(RXBUFF) | SPI_BIT(OVRES));
 	spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
 }
 
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index a0197fd4e95c40b26817fe942d2069a0381a41e5..3ce39d10fafbc270d47a17107b7cc5ce257dca94 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -139,6 +139,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws)
 				1,
 				DMA_MEM_TO_DEV,
 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!txdesc)
+		return NULL;
+
 	txdesc->callback = dw_spi_dma_tx_done;
 	txdesc->callback_param = dws;
 
@@ -184,6 +187,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws)
 				1,
 				DMA_DEV_TO_MEM,
 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!rxdesc)
+		return NULL;
+
 	rxdesc->callback = dw_spi_dma_rx_done;
 	rxdesc->callback_param = dws;
 
diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c
index 5ba331047cbefdea6d948ca20c8d6d3898cafbb0..6d331e0db33122b23cfa17f6602618a510efcde1 100644
--- a/drivers/spi/spi-dw-pci.c
+++ b/drivers/spi/spi-dw-pci.c
@@ -36,13 +36,13 @@ struct spi_pci_desc {
 
 static struct spi_pci_desc spi_pci_mid_desc_1 = {
 	.setup = dw_spi_mid_init,
-	.num_cs = 32,
+	.num_cs = 5,
 	.bus_num = 0,
 };
 
 static struct spi_pci_desc spi_pci_mid_desc_2 = {
 	.setup = dw_spi_mid_init,
-	.num_cs = 4,
+	.num_cs = 2,
 	.bus_num = 1,
 };
 
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 5a97a62b298ac1a526d4c1bde932f3eb2d5ad574..4847afba89f4e933e5a5d778c5f94e1a14ffe156 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -621,14 +621,14 @@ static void spi_hw_init(struct device *dev, struct dw_spi *dws)
 	if (!dws->fifo_len) {
 		u32 fifo;
 
-		for (fifo = 2; fifo <= 256; fifo++) {
+		for (fifo = 1; fifo < 256; fifo++) {
 			dw_writew(dws, DW_SPI_TXFLTR, fifo);
 			if (fifo != dw_readw(dws, DW_SPI_TXFLTR))
 				break;
 		}
 		dw_writew(dws, DW_SPI_TXFLTR, 0);
 
-		dws->fifo_len = (fifo == 2) ? 0 : fifo - 1;
+		dws->fifo_len = (fifo == 1) ? 0 : fifo;
 		dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len);
 	}
 }
diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index c01567d53581c0dcdfc6fcb61e7f6e821d0e0b39..e649bc7d4c086bb789d2dc1803c621bebdc29a19 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -459,6 +459,13 @@ static int img_spfi_transfer_one(struct spi_master *master,
 	unsigned long flags;
 	int ret;
 
+	if (xfer->len > SPFI_TRANSACTION_TSIZE_MASK) {
+		dev_err(spfi->dev,
+			"Transfer length (%d) is greater than the max supported (%d)",
+			xfer->len, SPFI_TRANSACTION_TSIZE_MASK);
+		return -EINVAL;
+	}
+
 	/*
 	 * Stop all DMA and reset the controller if the previous transaction
 	 * timed-out and never completed it's DMA.
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 89ca162801da10b8ec7a9c4311a33344f6a438a7..ee513a85296b19a3c57aad4daef4ec42ee3d90b1 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -534,12 +534,12 @@ static void giveback(struct pl022 *pl022)
 	pl022->cur_msg = NULL;
 	pl022->cur_transfer = NULL;
 	pl022->cur_chip = NULL;
-	spi_finalize_current_message(pl022->master);
 
 	/* disable the SPI/SSP operation */
 	writew((readw(SSP_CR1(pl022->virtbase)) &
 		(~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
 
+	spi_finalize_current_message(pl022->master);
 }
 
 /**
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 884a716e50cb822ce49dcb0e925a2c1856130bcb..5c061687035886e5768bf6031616068906540b04 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -101,6 +101,7 @@ struct ti_qspi {
 #define QSPI_FLEN(n)			((n - 1) << 0)
 
 /* STATUS REGISTER */
+#define BUSY				0x01
 #define WC				0x02
 
 /* INTERRUPT REGISTER */
@@ -199,6 +200,21 @@ static void ti_qspi_restore_ctx(struct ti_qspi *qspi)
 	ti_qspi_write(qspi, ctx_reg->clkctrl, QSPI_SPI_CLOCK_CNTRL_REG);
 }
 
+static inline u32 qspi_is_busy(struct ti_qspi *qspi)
+{
+	u32 stat;
+	unsigned long timeout = jiffies + QSPI_COMPLETION_TIMEOUT;
+
+	stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
+	while ((stat & BUSY) && time_after(timeout, jiffies)) {
+		cpu_relax();
+		stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
+	}
+
+	WARN(stat & BUSY, "qspi busy\n");
+	return stat & BUSY;
+}
+
 static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t)
 {
 	int wlen, count;
@@ -211,6 +227,9 @@ static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t)
 	wlen = t->bits_per_word >> 3;	/* in bytes */
 
 	while (count) {
+		if (qspi_is_busy(qspi))
+			return -EBUSY;
+
 		switch (wlen) {
 		case 1:
 			dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %02x\n",
@@ -266,6 +285,9 @@ static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t)
 
 	while (count) {
 		dev_dbg(qspi->dev, "rx cmd %08x dc %08x\n", cmd, qspi->dc);
+		if (qspi_is_busy(qspi))
+			return -EBUSY;
+
 		ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
 		if (!wait_for_completion_timeout(&qspi->transfer_complete,
 						 QSPI_COMPLETION_TIMEOUT)) {
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index ed9489d893a487f250868f8de603c84e707feaf8..856d34dde79bc9d81faae4171fb0c5492829c133 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -649,7 +649,7 @@ struct spi_transfer {
  * sequence completes.  On some systems, many such sequences can execute as
  * as single programmed DMA transfer.  On all systems, these messages are
  * queued, and might complete after transactions to other devices.  Messages
- * sent to a given spi_device are alway executed in FIFO order.
+ * sent to a given spi_device are always executed in FIFO order.
  *
  * The code that submits an spi_message (and its spi_transfers)
  * to the lower layers is responsible for managing its memory.